Mass‐producible Nano‐featured Polystyrene Surfaces for Regulating the Differentiation of Human Adipose‐derived Stem Cells

In this study, we report an efficient and cost‐effective method of fabricating polystyrene (PS) nano‐featured substrates containing nanopore (NPo) and nanopillar (NPi) arrays based on hot embossing using nickel nano‐stamps. We investigate the behavior of adipose‐derived stem cells (ASCs), including adhesion, morphology, proliferation and differentiation, on the replicated PS surfaces. Compared to a flat substrate, NPo‐ and NPi‐featured substrates do not alter the morphology of stem cells. However, both NPo‐ and NPi‐featured substrates induce different integrin expression and lower formation of focal adhesion complexes. In addition, ASCs on the NPo‐featured substrate exhibit greater adipogenic differentiation, while the NPi‐featured substrate induces higher osteogenic differentiation.

     

Cross-talk between BubR1 expression and the commitment to differentiate in adipose-derived mesenchymal stem cells

BubR1 mitotic checkpoint kinase monitors attachment of microtubules to kinetochores and links regulation of the chromosome-spindle attachment to mitotic checkpoint signaling. Defects in BubR1-mediated signaling severely perturb checkpoint control and are linked to diseases such as cancer. Studies using BubR1 mouse models suggest that BubR1 activities prevent premature aging and infertility. In this study, we show that BubR1 depletion in human adipose-derived mesenchymal stem cells (ASCs) precedes loss of the differentiation potential and induction of replicative senescence. These effects occur independently of p16^INK4A expression and may involve DNA methylation. Our results reveal a new and unsuspected feature of BubR1 expression in regulation of adult stem cell differentiation.     

Mouse bone marrow‐derived mesenchymal stem cell response to nanostructured titanium substrates produced by high‐pressure torsion

Mesenchymal stem cells (MSCs) with the ability to differentiate into various mesoderm‐like cells are known to migrate to various organs to repair injured tissues. They can attach to the implant surface, differentiate into bone‐forming cells, and ultimately osseointegrate with the prosthesis. This study investigates bone marrow‐derived mesenchymal stem cellular response to the grain structure of titanium substrates produced by high‐pressure torsion and annealing processes. Cell attachment, proliferation, viability, and morphology are evaluated on the surface of differently processed nanostructured and coarse‐grained samples. The bacterial adhesion and calcium phosphate crystal formation and growth are also assessed on the surface of the substrates. The nanostructured titanium shows significantly higher cell adhesion, proliferation, spreading, and viability compared with the untreated and coarse‐grained titanium substrates. The adhesion of bacteria is lower and surface bioactivity is higher on the surface of the nanostructured titanium substrate. The results demonstrate the superior MSC compatibility, antibacterial efficacy, and surface bioactivity of the nanostructured titanium substrates, which could lead to early implant fixation and improved osseointegration. Copyright © 2012 John Wiley & Sons, Ltd.     

Poly(ε-caprolactone)-banded spherulites and interaction with MC3T3-E1 cells

We report that protein adsorption, cell attachment, and cell proliferation were enhanced on spherulites-roughened polymer surfaces. Banded spherulites with concentric alternating succession of ridges and valleys were observed on spin-coated thin films of poly(ε-caprolactone) (PCL) and two series of PCL binary homoblends composed of high- and low-molecular-weight components when they were isothermally crystallized at 25-52 °C. Their thermal properties, crystallization kinetics, and surface morphology were examined. The melting temperature (T(m)), crystallinity (χ(c)), crystallization rate, and spherulitic patterns showed strong dependence on the crystallization temperature (T(c)) and the blend composition. The surface roughness of the spherulites was higher when T(c) was higher; thus, the larger surface area formed in banded spherulites could adsorb more serum proteins from cell culture media. In vitro mouse preosteoblastic MC3T3-E1 cell attachment, proliferation, and nuclear localization were assessed on the hot-compressed flat disks and spherulites-roughened films of the high-molecular-weight PCL and one of its homoblends. The number of attached MC3T3-E1 cells and the proliferation rate were greater on the rougher surfaces than those on the flat ones. It is interesting to note that cell nuclei were preferentially, though not absolutely, located in or close to the valleys of the banded spherulites. The percentage of cell nuclei in the valleys was higher than 78% when the ridge height and adjacent ridge distance were ~350 and ~35 nm, respectively. This preference was weaker when the ridge height was lower or at a higher cell density. These results suggest that isothermal crystallization of semicrystalline polymers can be an effective thermal treatment method to achieve controllable surface roughness and pattern for regulating cell behaviors in tissue-engineering applications.     

Laponite–Gelatin Nanofibrous Microsphere Promoting Human Dental Follicle Stem Cells Attachment and Osteogenic Differentiation for Noninvasive Stem Cell Transplantation

Nanofibrous microspheres (NFM) are emerging as prominent next-generation biomimetic injectable scaffold system for stem cell delivery and different tissue regeneration where nanofibrous topography facilitates ECM-like stem cells niches. Addition of osteogenic bioactive nanosilicate platelets within NFM can provide osteoconductive cues to facilitate matrix mediated osteogenic differentiation of stem cells and enhance the efficiency of bone tissue regeneration. In this study, gelatin nanofibrous microspheres are prepared containing fluoride-doped laponite XL21 (LP) using the emulsion mediated thermal induce phase separation (TIPS) technique. Systematic studies are performed to understand the effect of physicochemical properties of biomimicking NFM alone and with different concentrations of LP on human dental follicle stem cells (hDFSCs), their cellular attachment, proliferation, and osteogenic differentiation. The study highlights the effect of LP nanosilicate with biomimicking nanofibrous injectable scaffold system aiding in enhancing stem cell differentiation under normal physiological conditions compared to NFM without LP. The laponite–NFM shows suitability as excellent injectable biomaterials system for stem cell attachment, proliferation and osteogenic differentiation for stem cell transplantation and bone tissue regeneration.     

Electrospun poly(l‐lactide) nanofibers coated with mineral trioxide aggregate enhance odontogenic differentiation of dental pulp stem cells

A combination of bioceramics and nanofibrous scaffolds holds promising potential for inducing of mineralization in connective tissues. The aim of the present study was to investigate the attachment, proliferation and odontogenic differentiation of dental pulp stem cells (DPSC) on poly(l ‐lactide) (PLLA) nanofibers coated with mineral trioxide aggregate (MTA). Polymeric scaffolds were fabricated via the electrospinning method and their surface was coated with MTA. DPSC were isolated from dental pulp and their biological behavior was evaluated on scaffolds and the control group using MTT assay. Alkaline phosphatase (ALP) activity, biomineralization and the expression of odontogenic genes were analyzed during odontogenic differentiation. Isolated DPSC showed spindle‐shaped morphology with multi‐lineage differentiation potential and were positive for CD73, CD90 and CD105. MTA‐coated PLLA (PLLA/MTA) exhibited nanofibrous structure with average fiber diameter of 756 ± 157 nm and interconnected pores and also suitable mechanical properties. Similar to MTA, these scaffolds were shown to be biocompatible and to support the attachment and proliferation of DPSC. ALP activity transiently peaked on day 14 and was significantly higher in PLLA/MTA scaffolds than in the control groups. In addition, increasing biomineralization was observed in all groups with a higher amount in PLLA/MTA. Odontogenic‐related genes, DSPP and collagen type I showed a higher expression in PLLA/MTA on days 21 and 14, respectively. Taken together, MTA/PLLA electrospun nanofibers enhanced the odontogenic differentiation of DPSC and showed the desired characteristics of a pulp capping material.     

Heparin Interacting Protein Mediated Assembly of Nano‐Fibrous Hydrogel Scaffolds for Guided Stem Cell Differentiation

A new methodology is developed to conjugate hyaluronic acid (HA) hydrogel with novel nano‐fibrous architectures via non‐covalent assembly that specifically allows for targeted adipose‐derived stem cells (ASCs) differentiation and soft tissue engineering. The assembly of non‐covalently associated hydrogel network produced via the interaction of a low molecular weight heparin (LMWH) modified HA derivative and heparin interacting protein (HIP). The multifunctional star poly(ethylene glycol) (PEG) and HIP copolymer has the capability to mediate the non‐covalent assembly of nano‐fibrous HA hydrogel networks via affinity interactions with LMWH. The effect of the HIP mediation on in vitro gelation, rheological characteristics, degradation, equilibrium swelling, adipose‐derived stem cells (ASCs) proliferation and differentiation of nano‐fibrous hydrogel is examined. The results suggest the potential utility of this unique design of the bioactive nano‐fibrous HA hydrogel in directing the differentiation of ASCs and adipogenesis in ECM‐mimetic scaffolds in vitro. These studies demonstrate that this nano‐fibrous HA hydrogel can render the formulation of a therapeutically effective platform for in vitro adipogenesis applications.

     

Microtopography based on inverse opal structures regulates the behavior of bone marrow‐derived mesenchymal stem cells

Physical cues from the extracellular microenvironment play an important role in regulating cell behavior, such as adhesion, migration, and differentiation. Many studies have shown that different physical parameters (eg, stiffness and topography) could modulate the in vitro differentiation of mesenchymal stem cells (MSCs), which had multilineage differentiation potential and could be easily isolated from various tissues such as bone marrow, adipose tissue, and the umbilical cord. However, the underlying mechanism of the topographical influence on MSCs and the detailed cell‐substrate interaction remain unclear. Here, we present oriented elliptical inverse opal structures for regulating the morphology and alignment of bone marrow‐derived MSCs. The inverse opal structures were made through a convenient bottom‐up approach of self‐assembly, which is facile and cost effective. MSCs cultured on the oriented structures were highly aligned and extended highly oriented thick lamellipodia. Moreover, the oriented substrates cracked along the lateral boundary of the cells, suggesting that a strong cell‐substrate interaction was induced by the response of MSCs to the oriented topography. These features of the oriented elliptical topography indicated their promising value in stem cell research and tissue engineering.     

Alterations of proliferative and differentiation potentials of human embryonic stem cells during long-term culture

Human embryonic stem cells (hESCs) are considered to be able to stably maintain their characteristics in vitro for prolonged periods, but we had previously encountered changes in proliferative ability and differentiation potential during extended culture of hESCs. Therefore, we investigated the proliferative ability and differentiation potential of hESCs during long-term culture. The hESCs, SNUhES3, were used to analyze population-doubling time, proliferation rate and differentiation potential. We classified hESCs into three groups according to culture period. Ten colonies of hESCs for each group were daily measured colony area and population-doubling time was assessed by the changes of colony area. Proliferation rate of hESCs was measured by 5-bromo-2'-deoxyuridine (BrdU) assay and telomerase activity. To evaluate differentiation potentials for hESCs, expression levels of undifferentiated and/or differentiated hESCs markers were examined by FACS, RT-PCR and immunostaining. Population-doubling time of early passage hESCs was longer than those of middle or late passage. Proliferative ability of hESCs was accelerated depending on culture periods. Cellular morphologies and the expression level of each three germ layer markers were obviously different from each passage of reattached embryoid bodies (EBs) after spontaneous differentiation. Differentiated cells of late passage expressed higher levels of undifferentiated markers such as Oct4 and SSEA4 than those of early and middle passage. But differentiated cells of early and middle passage expressed higher level of differentiated state markers, Nestin (ectoderm), Brachyury (mesoderm), HNF3beta (endoderm). From these results, it can be inferred that hESCs show higher proliferative abilities and reduced differentiation potentials as the passage number increased. Therefore, we conclude that early passage hESCs could be more suitable than middle and late passage hESCs in differentiation studies.     

Regulation of cellular responses to macroporous inorganic films prepared by the inverse-opal method

Regenerative medicine for repairing damaged body tissues has recently become critically important. Cell culture scaffolds are required for the control of cell attachment, proliferation, and differentiation in in vitro cell cultures. A new strategy to control cell adhesion, morphology, and proliferation was developed by culturing mouse osteoblast-like MC3T3-E1 cells on novel cell culture scaffolds fabricated using ordered nanometer-sized pores (100, 300, 500, and 1000 nm). Results of this study indicate that after 72 h of incubation, the number of cells cultured on a silica film with a pore size of 1000 nm was similar to or slightly lower than that cultured on a non-porous control silica film. Films with 100-500 nm pore sizes, however, resulted in the cell growth inhibition. Morphology of the cultured cells revealed increased elongation and the formation of actin stress fibers was virtually absent on macroporous silica films with 100-500 nm pore size. Vinculin molecules expressed in cells cultured on the non-porous silica films showed many clear focal adhesions, whereas focal contacts were insufficiently formed in cells cultured on macroporous films. The influence of hydroxyapatite (HAp) and alumina scaffolds on the behavior of MC3T3-E1 cells was also evaluated. The proliferation rate of MC3T3-E1 cells cultured on HAp films with 1000 nm pore size was increased to approximately 20% above than that obtained of cells cultured on non-porous HAp films. These results demonstrate that the pore size and constituents of films play a role in controlling the morphology and proliferation rate of MC3T3-E1 cells.     

3D Plotted PCL Scaffolds for Stem Cell Based Bone Tissue Engineering

The ability to control the architecture and strength of a bone tissue engineering scaffold is critical to achieve a harmony between the scaffold and the host tissue. Rapid prototyping (RP) technique is applied to tissue engineering to satisfy this need and to create a scaffold directly from the scanned and digitized image of the defect site. Design and construction of complex structures with different shapes and sizes, at micro and macro scale, with fully interconnected pore structure and appropriate mechanical properties are possible by using RP techniques. In this study, RP was used for the production of poly(ε-caprolactone) (PCL) scaffolds. Scaffolds with four different architectures were produced by using different configurations of the fibers (basic, basic-offset, crossed and crossed-offset) within the architecture of the scaffold. The structure of the prepared scaffolds were examined by scanning electron microscopy (SEM), porosity and its distribution were analyzed by micro-computed tomography (µ-CT), stiffness and modulus values were determined by dynamic mechanical analysis (DMA). It was observed that the scaffolds had very ordered structures with mean porosities about 60%, and having storage modulus values about 1 × 10⁷ Pa. These structures were then seeded with rat bone marrow origin mesenchymal stem cells (MSCs) in order to investigate the effect of scaffold structure on the cell behavior; the proliferation and differentiation of the cells on the scaffolds were studied. It was observed that cell proliferation was higher on offset scaffolds (262000 vs 235000 for basic, 287000 vs 222000 for crossed structure) and stainings for actin filaments of the cells reveal successful attachment and spreading at the surfaces of the fibers. Alkaline phosphatase (ALP) activity results were higher for the samples with lower cell proliferation, as expected. Highest MSC differentiation was observed for crossed scaffolds indicating the influence of scaffold structure on cellular activities.     

Preliminary Research on a Mesenchymal Stem Cell-model for Screening Traditional Chinese Medicines

The authors focused their attention on the establishment of a mesenchymal stem cell(MSC) model for screening traditional Chinese medicines(TCMs) so as to investigate the effects of Shuanglong Formula(SLF) components(Ginsenosides and salvianolic acids) and ingredients(ginsenoside Rb1 and salvianolic acid B) on cardiomyocyte differentiation from MSCs.The SLF components were analyzed and quantified by HPLC-TOF-MS.Cardiomyocyte differentiation was induced by culturing MSCs in the induction medium supplemented with SLF ingredients,SLF components,5-azacytidine(5-aza),5-aza+SLF ingredients and 5-aza+SLF components,respectively,for up to 30 d,and evulated by the expression of Cardiac-specific myosin heavy chain(MHC) and troponin I(TnI) via immunofluoresent staining.Slow growth rate and changed morphology were observed during cardiomyocyte differentiation.After 20 d of induction,differentiating MSCs were positive for MHC and TnI staining.The effects of SLF components were better than those of SLF ingredients.Taken together,SLF can induce the differentiation of MSCs into cardiomyogenic cells in vitro,and MSCs can be used as a powerful tool for screening TCMs.     

Tetrahedral framework nucleic acids regulate osteogenic differentiation potential of osteoporotic adipose-derived stem cells

Osteoporosis(OP) is a noncommunicable bone disease caused by a shift in the balance between osteoblasts and osteoclasts, and can severely affect the health of elderly persons. Autologous stem-cell transplantation can improve reduced bone density and weakened fracture healing abilities in patients with OP. However, OP can adversely affect the osteogenesis and proliferation abilities of autologous adipose-derived stem cells(ASCs). Therefore, an effective drug is required to facilitate autologous A...     

Polypyrrole thin films formed by admicellar polymerization support the osteogenic differentiation of mesenchymal stem cells

The objective of this study was to evaluate the attachment, proliferation, and differentiation of rat mesenchymal stem cells (MSC) toward the osteoblastic phenotype seeded on polypyrrole (PPy) thin films made by admicellar polymerization. Three different concentrations of pyrrole (Py) monomer (20, 35, and 50 x 10(-3) M) were used with the PPy films deposited on tissue culture polystyrene dishes (TCP). Regular TCP dishes and PPy polymerized on TCP by chemical polymerization without surfactant using 5 x 10(-3) M Py, were used as controls. Rat MSC were seeded on these surfaces and cultured for up to 20 d in osteogenic media. Surface topography was characterized by atomic force microscopy, X-ray photoelectron spectroscopy, and static contact angle. Cell attachment, proliferation, alkaline phosphatase (ALP) activity, and calcium content were measured to evaluate the ability of MSC to adhere and differentiate on PPy-coated TCP. Increased monomer concentrations resulted in PPy films of increased thickness and surface roughness. PPy films generated by different monomer concentrations induced drastically different cellular events. A wide spectrum of cell attachment characteristics (from excellent cell attachment to the complete inability to adhere) were obtained by varying the monomer concentration from 20 m to 50 x 10(-3) M. In particular the 20 x 10(-3) M PPy thin films demonstrated superior induction of MSC osteogenicity, which was comparable to standard TCP dishes, unlike PPy films of similar thickness prepared by chemical polymerization without surfactant. Adhesion of mesenchymal stem cells on tissue culture plates (TCP) coated with polypyrrole thin films made by admicellar polymerization.     

基于可控定向PVDF电纺纤维构建细胞相容性的三维微环境

三维电纺纤维在生物医学领域, 如生物传感、 药物控制释放与组织工程等方面具有良好的应用前景. 然而, 现有的电纺技术在制备结构、 孔隙率与形貌均可调节的三维定向电纺纤维方面还存在一定不足. 因此亟需开发一种新型的电纺丝工艺以制备三维定向电纺纤维. 本文通过改进传统的电纺丝工艺, 开发了一种简单高效制备三维定向聚偏氟乙烯(PVDF)的电纺丝制备技术. 所制备的三维定向纤维的形貌、 直径及纤维密度均可控. 体外细胞实验结果表明, 该类三维定向纤维具有良好的生物相容性, 能够促进细胞活性, 诱导细胞沿着纤维的方向生长. 此外, 研究结果还表明, 将该三维定向纤维作为细胞培养支架时, 细胞的增殖高于利用传统的二维纤维膜. 该制备技术将极大地拓宽三维定向纤维在三维细胞培养、 组织工程及疾病诊断等生物医学领域的应用.     

The influence of polyelectrolyte charges of polyurethane membrane surface on the growth of human endothelial cells

A novel technique to introduce free amino groups onto polyester scaffolds via aminolyzing the ester groups with diamine has been developed recently. The introduction of the free amino groups on these polyester surfaces provides us the possibility to modify polymer surface in a simpler manner, e.g. layer-by-layer assembly of charged species. By this technique, many negatively and positively charged biopolymers were deposited alternatively on polyurethane surface. The deposition process was monitored by fluorescence spectroscopy and advancing contact angle measurements. The result of human endothelial cells cultured in vitro showed that cells on negatively charged surface could not spread and flatten well due to the electrostatic repulsion. The lower attachment ratio induced the lower proliferation ratio. However, after the surface charge was inversed by collagen, both attachment and proliferation ratios increased to different extent. Observed under SEM, cells also presented a flat and spreading morphology.     

Mesenchymal stem cells promote proliferation of endogenous neural stem cells and survival of newborn cells in a rat stroke model

Mesenchymal stem cells (MSCs) secrete bioactive factors that exert diverse responses in vivo. In the present study, we explored mechanism how MSCs may lead to higher functional recovery in the animal stroke model. Bone marrow-derived MSCs were transplanted into the brain parenchyma 3 days after induction of stroke by occluding middle cerebral artery for 2 h. Stoke induced proliferation of resident neural stem cells in subventricular zone. However, most of new born cells underwent cell death and had a limited impact on functional recovery after stroke. Transplantation of MSCs enhanced proliferation of endogenous neural stem cells while suppressing the cell death of newly generated cells. Thereby, newborn cells migrated toward ischemic territory and differentiated in ischemic boundaries into doublecortin+ neuroblasts at higher rates in animals with MSCs compared to control group. The present study indicates that therapeutic effects of MSCs are at least partly ascribed to dual functions of MSCs by enhancing endogenous neurogenesis and protecting newborn cells from deleterious environment. The results reinforce the prospects of clinical application using MSCs in the treatment of neurological disorders.     

Human Mesenchymal Stem‐Cell Behaviour On Direct Laser Micropatterned Electrospun Scaffolds with Hierarchical Structures

Direct laser machining and electrospinning are utilized to obtain a bi‐layered hybrid scaffold with hierarchical topographical features to mimic extracellular matrix‐like microenvironment of cells. Adult bone marrow derived human mesenchymal stem cells (hMSCs) are cultured in vitro in these hybrid scaffolds, and cell orientation, proliferation, viability, and differentiation are evaluated. The results show that this novel hybrid scaffold not only supports cell growth like traditional scaffolds, but also elicits positive responses from the cells, like lineage commitment and alignment, which are essential features of future scaffolds.

     

Effect of berberine on the viability of adipose tissue-derived mesenchymal stem cells in nutrients deficient condition

This study was designed to examine whether berberine protects rat adipose tissue-derived stem cells (ASCs) against glucose and serum deprivation (GSD)-induced cell death. ASCs were cultured for 24 h in GSD condition in the presence of berberine and then cell viability, apoptosis and generation of reactive oxygen species (ROS) were evaluated. The GSD condition significantly decreased ASCs viability and increased ROS generation and apoptosis. Incubation with 0.75–3 μM berberine partially increased cell viability and decreased ROS generation and apoptosis in GSD condition. In conclusion, berberine partially protects ASCs in nutrients deficient condition and may help ASCs to preserve their survival during cell therapy of ischemia.