A computational study on the adsorption and ring cleavage of para-chlorophenol on anatase TiO2 surface

In this work, a computational technique based on semiempirical SCF MO method MSINDO, has been used for investigation of the adsorption and photocleavage of para-chlorophenol (p-CP) molecule on the anatase TiO₂ (0 0 1) and (1 0 0) surfaces. The surfaces have been modeled with two saturated clusters Ti₂₁O₅₈H₃₂ and Ti₃₆O₉₀H₃₆. The optimization of the perpendicular conformation of p-CP molecule relative to the anatase TiO₂ (1 0 0) surface, has resulted in a linkage of the molecule to the surface titanium atom via phenolic oxygen atom. We studied the aromatic ring cleavage by singlet oxygen (¹O₂) and superoxide radical anion () and accordingly, relevant mechanisms are suggested. The results reveal that the ring opening path of p-CP molecule on TiO₂ (1 0 0) surface, following the single electron transfer/ mechanism, is energetically more favourable than the ¹O₂/dioxetane mechanism.     

Gas phase electronic spectrum of propadienylidene C3H2

The rotationally resolved vibronic bands in the forbidden electronic transition of the cumulene carbene C₃H₂ have been observed in the gas phase by cavity ring down absorption spectroscopy through a supersonic planar plasma with allene as precursor. The band detected in the 16 223 cm⁻¹ region is a result of vibronic interaction and is assigned to a combination of a₁ and b₂ vibrations with a frequency around 2250 cm⁻¹. Another vibronic band near 15 810 cm⁻¹ has an unusual rotational structure because the K_a = 0-1 subband is absent. It is assigned to a combination of a₁ and b₁ vibrations, ∼1850 cm⁻¹, which borrow intensity from the near lying state due to a-type Coriolis coupling. A rotational analysis using a conventional Hamiltonian for an asymmetric top molecule yields molecular constants for the vibrational excited levels of the ùA₂ state, which were used for the determination of the geometry. The stronger transition of C₃H₂, measured in a neon matrix in the 16 161-24 802 cm⁻¹ range, was not detected. The reason for this is a short lifetime of the state, leading to line broadening.     

CH4 dissociation on Ni surfaces: Density functional theory study

CH₄ dissociation on Ni surfaces, which is important in CH₄ reforming reactions, was discussed by using density functional theory. It was found that the CH_x species were changed to anions after chemisorption. The site preference of CH_x (x = 0-3) species on Ni(1 1 1), Ni(1 0 0) and Ni(1 1 0) was located on the basis of the computed chemisorption energies. Ni(1 0 0) is the most preferred surface for CH₄ dissociation, compared to Ni(1 1 0) and the widely investigated Ni(1 1 1).     

Bulk vs. surface effects in ARPES experiment from La2/3Sr1/3MnO3 thin films

Experiments directly probing the electronic states using angle-resolved photoemission (ARPES) were carried out on La_2/3Sr_1/3MnO₃ in order to elucidate its electronic properties. ARPES is a surface sensitive technique where bulk and surface states are usually both present. We present high-resolution ARPES studies in the (1 0 0) and (1 1 0) mirror planes and compare them with simulated ARPES based on GGA + U band structure calculations. In the (1 1 0) mirror plane we identify surface umklapps accounted by surface reconstruction which couple to bulk electronic states. As predicted by the simulated spectra there is additional spectral intensity at the Fermi level detected in ARPES data due to k_⊥-broadening effects in the photoemission final states. We demonstrate that this additional spectral intensity is a convenient spectral marker for determination of the k_F Fermi momenta.     

Absorption spectra of AsH2 radical in 435-510 nm by cavity ringdown spectroscopy

The absorption spectra of jet-cooled AsH₂ radicals were recorded in the wavelength range of 435-510 nm by cavity ringdown spectroscopy. The AsH₂ radicals were produced by pulsed DC discharge in a molecular beam of a mixture of AsH₃, SF₆, and argon. Seven vibronic bands with fine rotational structures have been identified and assigned as the , , and (n = 1-3) bands of the electronic transition. Based on the previous studies of AsH₂ radical, rotational assignments and rotational term values for each band were obtained, and the molecular parameters including vibrational constants, rotational constants, centrifugal distortion constants, and spin-rotation interaction constants were also determined.     

Gas-phase detection of discharge-generated DSOD

We report the first spectroscopic detection of perdeuterated 1-oxadisulfane, DSOD, generated in a radio-frequency plasma of D₂S and D₂O. The chain molecule DSOD produces a perpendicular-type spectrum, with well-known spectral features encountered in previous studies of geometrically related molecules, such as compact Q-branches, which are clearly recognizable. The arrangement of the transitions shaping the Q-branches usually provides sufficient proof for a clear-cut detection of a chain molecule such as DSOD. Guided by quantum chemical calculations, we have located the band center of the -branch of DSOD in the frequency region near 466.5 GHz using the Cologne terahertz spectrometer. This -branch displays both b- and c-type spectra, quite analogous to the behavior of the corresponding -branch of HSOH. In addition, we have been able to detect an internal rotational splitting of ∼0.5 MHz for c-type transitions of the -branch, which lends independent support to our present assignment. From the measurements performed on Q-branches, we derive the following differences in rotational constants: A−(B+C)/2=93331.001(15) MHz, and (B−C)/4=172.95923(29) MHz, in excellent agreement with theoretical predictions.     

A novel approach to measure the step line tension and the step dipole moment on vicinal Au(0 0 1) electrodes

In this paper we introduce a new experimental approach to determine the potential dependence of the step line tension on metal electrodes in contact with an electrolyte: (0 0 1) and (1 1 n) surfaces of single crystal gold electrodes were investigated by impedance spectroscopy in solutions containing weakly adsorbing anions, such as , F⁻ and . Within the limits of error the shift in the potential of zero charge is proportional to the step density of the vicinal surfaces indicative of a well-defined dipole moment per step length. The dipole moments per step atom are 6.8 ± 0.8, 5.2 ± 0.4, 5.8 ± 0.5 × 10⁻³ eÅ for , , and F⁻ containing electrolytes, respectively. Using the values for the pzc and the potential dependence of the capacitance curves, the potential dependence of the surface tension of the vicinal surfaces is determined. The line tension of the steps is then calculated from the difference between the surface tension of the stepped and the step free surface. Our results represent the first experimental confirmation of a recent theoretical model proposing that in absence of specifically adsorbed ions the step line tension should decrease (roughly linear) with potential.     

Ultraviolet absorption spectrum and cross-sections of ethynyl (C2H) radicals

This work reports the ultraviolet absorption spectrum and cross-sections of ethynyl (C₂H) radicals in the wavelength range 235-260 nm, determined at T=298 K and at a total pressure of about 20 kPa (150 Torr). Ethynyl radicals were produced from the single photon 193 nm excimer laser photolysis of dilute mixtures of C₂HCF₃ or C₂H₂ in He. Gas chromatographic/mass spectroscopic analysis of the photolyzed samples showed diacetylene (C₄H₂) as the major stable product. Addition of methane in the photolysis mixtures resulted in reduction of diacetylene and production of methylacetylene and ethane, products of the reaction of ethynyl radicals with methane. Survey of the ultraviolet spectral region, employing time-resolved UV-absorption spectroscopy, resulted in detection of a transient absorption centered at about 243 nm. The spectra obtained from the 193-nm photolysis of both C₂HCF₃/He and C₂H₂/He radical precursors were nearly identical, suggesting that the absorption feature can be attributed to the ethynyl radicals. The observed ultraviolet spectrum exhibits a relatively broad absorption feature with some structures and an absorption peak at about 243.5 nm. The absorption cross-sections for ethynyl radicals have been determined in this work for the first time. The C₂H cross-section, at the maximum absorption, at 243.5 nm is . The stated uncertainty includes the random and systematic measurement errors. The UV absorption feature, detected in this work, can be assigned to the transitions from the ground electronic state and also possibly from coupled ground and lowest electronic states to the electronic state B (or 32A′) of C₂H. This assignment is based on previously reported high level ab initio molecular orbital calculations and results of recent laser-induced fluorescence studies of the ethynyl radical.     

High-resolution Fourier transform spectrum of H2S in the region of the second hexade

High-resolution Fourier transform infrared spectrum of was recorded and analyzed in the region of the second hexade . More than 1700 transitions were assigned to the 2ν₁ + ν₂, ν₁ + ν₂ + ν₃, ν₁ + 3ν₂, 3ν₂ + ν₃, 5ν₂, and ν₂ + 2ν₃ bands with the maximum value of quantum number J equal to 18, 18, 13, 11, 13, and 9, respectively. The theoretical analysis was fulfilled with a Hamiltonian model which takes into account numerous resonance interactions between all the vibrational states in this polyad. By a least-square fitting, finally 505 upper energy levels were reproduced by 80 parameters with an rms deviation of 0.0019 cm⁻¹.     

Combined experimental and theoretical investigation of the CO2 adsorption on LaMnO3+y perovskite oxide

The surface interaction of CO₂ with the perovskite-type oxide LaMnO_3+y has been investigated by means of density functional theory calculations and experimental measurements of adsorption isotherms in the temperature range 298-473 K. A (1 0 0) oriented slab of the cubic structure was used for modeling CO₂ adsorption. The reference unit cell contains alternating LaO⁺ layers and layers; one slab is LaO⁺-terminated and the opposite surface is terminated. A Freundlich isotherm fitted the experimental data satisfactorily. Analysis of the isosteric heat revealed an energetically heterogeneous character for the lanthanum manganite oxide surface, mainly due to the degree of heterogeneity of the adsorption center and due to the adsorbate-adsorbate lateral interactions. Considering theoretical calculations and thermodynamical approaches, two types of active sites were found to be responsible for irreversible and reversible adsorption of CO₂ as a function of surface coverage and O₂ treatment. Strong adsorption takes place on the surface containing La cations. The strongest adsorption is associated with surface oxygen vacancies, center. The next strongest adsorption, a flat adaptation of CO₂ molecules with respect to the surface sites, with a strong binding to a surface oxygen, leads to chemisorbed carbonate species. These adsorption modes are chiefly indicative of a high basic character of the lanthanum manganite oxide surface. Several cationic sites formed by lanthanum and manganese cations are able to weakly adsorb CO₂ molecules in perpendicular or bridged forms. The latter adsorption modes suggest a weak acidic character of the manganite adsorbent.     

Oxygen induced surface structure of Mo(1 1 0) studied by scanning tunneling microscopy

The oxygen induced surface structures formed on Mo(1 1 0) by oxygen exposure at 1300 K in UHV has been studied by scanning tunneling microscopy (STM). Two kinds of oxygen-adsorbed surface structures are observed. One consists of one-dimensional rows running along or directions at substrate molybdenum lattices, and another shows more complex structure including discrete arrangement of large protrusions and zig-zag alignments of small protrusions. This complex structure is probably a further oxygen-adsorbed structure than the well-known p(2 × 2) structure of 0.3 ML coverage. On the basis of STM image, an atomic model is proposed, where adsorbed oxygen atoms occupy both long-bridge and the quasi-threefold sites of molybdenum lattice (0.4 ML coverage). This structure is presumed to be a transient state during site-conversion with increase of oxygen exposure.     

Surface reconstructions on InN and GaN polar and nonpolar surfaces

We report a systematic and comprehensive computational study of surface reconstructions on GaN and InN surfaces in various orientations, including the polar c plane as well as the nonpolar a and m planes. For GaN we have identified several new metallic reconstructions under highly Ga-rich conditions on the nonpolar planes. For InN we find several distinct differences from the GaN case: the absence of a nitrogen-adatom reconstruction on the (0 0 0 1) plane; the presence of a single, metallic reconstruction over the entire stability range on the plane; and In-adlayer reconstructions on the (m) plane. An interesting “inverted polarity” defect structure on the (m) plane is also revealed.     

Modelling of phase transitions and reaction at CO adsorption on oxygen precovered Pd(1 1 1)

Using the interaction parameters up to the third neighbors and activated form of O and CO diffusion and their reaction, the model has been proposed for Monte-Carlo simulations describing the catalytic O + CO → CO₂ reaction and occurring phase transitions on Pd(1 1 1) surface. Upon adsorption of CO the pre-adsorbed oxygen transforms from p(2 × 2)_O phase into and phases in the limit of room and moderate temperatures, respectively. We demonstrate that the kinetic effects determine both the occurrence of the p(2 × 1)_O and disappearance of the phases at moderate and low temperatures, respectively. Using reaction rate as a fit parameter, we show that at room temperature the start of the reaction can be synchronized with the occurrence of phase.     

Anisotropy analysis of the surface stress and surface energy in Cu surfaces with the modified embedded atom method

Taking Cu as an example, the surface stress and surface energy in three low index surfaces and two families of representative surfaces and belong to [0 0 1]- and -rotating axis respectively, have been calculated using MEAM. For the three low index surfaces, the decrease in the surface energy is small after relaxation, while the surface stresses in the surface planes τ_xx and τ_yy show opposite changes (decreasing and increasing) for inward and outward relaxations. The resulting relaxation direction is related to the normal stress τ_zz before relaxation. For the surfaces of the and families, with the increasing angle α (between the and (1 0 0) planes, and between and (0 0 1) planes, respectively), the surface stress and surface energy go through an oscillatory change. The surface stress and surface energy are symmetric about the planes (1 0 0), (1 1 0) and (0 1 0) at α=0^°, 45^° and 90^°, and about the planes (0 0 1) and (1 1 0) at α=0^° and 90^° respectively, due to crystal symmetry.