Au/TiO2/Ru(0 0 0 1) model catalysts and their interaction with CO

Au/TiO₂/Ru(0 0 0 1) model catalysts and their interaction with CO were investigated by scanning tunneling microscopy and different surface spectroscopies. Thin titanium oxide films were prepared by Ti deposition on Ru(0 0 0 1) in an O₂ atmosphere and subsequent annealing in O₂. By optimizing the conditions for deposition and post-treatment, smooth films were obtained either as fully oxidized TiO₂ or as partly reduced TiO_x, depending on the preparation conditions. CO adsorbed molecularly on both oxidized and reduced TiO₂, with slightly stronger bonding on the reduced films. Model catalyst surfaces were prepared by depositing submonolayer quantities of Au on the films and characterized by X-ray photoelectron spectroscopy and scanning tunneling microscopy. From X-ray photoelectron spectroscopy, a weak interaction between the Au and the TiO₂ substrate was found. At 100 K CO adsorption occurred on both the TiO₂ film and on the Au nanoparticles. CO desorbed from the Au particles with activation energies between 53 and 65 kJ/mol, depending on the Au coverage. If the Au deposit was annealed to 770 K prior to CO exposure, the CO adsorption energy decreased significantly. STM measurements revealed that the Au particles grow upon annealing, but are not encapsulated by TiO_x suboxides. The higher CO adsorption energy observed for smaller Au coverages and before annealing is attributed to a significantly stronger interaction of CO with mono- and bilayer Au islands, while for higher particles, the adsorption energy becomes more bulk-like. The implications of these effects on the known particle size effects in CO oxidation over supported Au/TiO₂ catalysts are discussed.     

Thermal and photochemical reactivity of oxygen atoms on gold nanocluster surfaces

Reduction of oxidized gold nanoclusters by exposures to foreign gases and irradiation of UV photons has been investigated using X-ray photoelectron spectroscopy. Gold nanoclusters with narrow size distributions protected by alkanethiolate ligands were deposited on a TiO₂(1 1 0) surface with dip coating. Oxygen plasma etching was used for removal of alkanethiolate ligands and oxidization of gold clusters. The oxidized gold clusters were exposed to CO, C₂H₂, C₂H₄, H₂, and hydrogen atoms. Although, C₂H₄ and H₂ did not show any indications of reduction of oxidized gold clusters, CO, C₂H₂, and hydrogen atoms reduced the oxides on gold cluster surfaces. Among them, hydrogen atoms were most effective for reduction. Irradiation of UV photons around 400 nm could also reduce the oxidized gold clusters. The photochemical reduction mechanism was proposed as follows. The photo-reduction was initiated by electronic excitation of gold clusters and oxygen atoms activated reacted with carbon atoms at the surfaces of gold clusters. Carbon species were likely absorbed in gold clusters or remained at the boundaries between gold clusters when gold clusters agglomerated during oxygen plasma exposures. As the photochemical reduction progressed, carbon atoms segregated to the surfaces of gold clusters.     

Growth mode and electronic structure of Au nano-clusters on NiO(0 0 1) and TiO2(1 1 0)

The growth mode and electronic structure of Au nano-clusters grown on NiO and TiO₂ were analyzed by reflection high-energy electron diffraction, a field-emission type scanning electron microscope, medium energy ion scattering and photoelectron spectroscopy. Au was deposited on clean NiO(0 0 1)-1 × 1 and TiO₂(1 1 0)-1 × 1 surfaces at room temperature with a Knudsen cell at a rate of 0.25-0.35 ML/min (1 ML = 1.39 × 10¹⁵ atoms/cm²:Au(1 1 1)). Initially two-dimensional (2D) islands with thickness of one Au-atom layer grow epitaxially on NiO(0 0 1) and then neighboring 2D-islands link each other to form three-dimensional (3D)-islands with the c-axis oriented to the [1 1 1] direction. The critical size to form 3D-islands is estimated to be about 5 nm². The shape of the 3D-islands is well approximated by a partial sphere with a diameter d and height h ranging from 2.0 to 11.8 nm and from 0.95 to 4.2 nm, respectively for Au coverage from 0.13 to 4.6 ML. The valence band spectra show that the Au/NiO and Au/TiO₂ surfaces have metallic characters for Au coverage above 0.9 ML. We observed Au 4f spectra and found no binding energy shift for Au/NiO but significant higher binding energy shifts for Au/TiO₂ due to an electron charge transfer from Au to TiO₂. The work function of Au/NiO(0 0 1) gradually increases with increase in Au coverage from 4.4 eV (NiO(0 0 1)) to 5.36 eV (Au(1 1 1)). In contrast, a small Au deposition(0.15 to 1.5 ML) on TiO₂(1 1 0) leads to reduction of the work function, which is correlated with an electron charge transfer from Au to TiO₂ substrate.     

Scanning tunneling microscopy study of growth of Pt nanoclusters on thin film Al2O3/NiAl(1 0 0)

The growth of Pt nanoclusters on thin film Al₂O₃ grown on NiAl(1 0 0) was studied by using scanning tunneling microscopy (STM). The samples were prepared by vapor depositing various amounts of Pt onto the Al₂O₃/NiAl(1 0 0) at different substrate temperatures in ultra high vacuum (UHV). The STM images show that sizeable Pt nanoclusters grow solely on crystalline Al₂O₃ surface. These Pt clusters appear to be randomly distributed and only a few form evident alignment patterns, contrasting with Co clusters that are highly aligned on the crystalline Al₂O₃. The size distributions of these Pt clusters are rather broader than those of the Co clusters on the same surface and the sizes are evidently smaller. With increasing coverage or deposition temperature, the number of larger clusters is enhanced, while the size of the majority number of the clusters remains around the same (0.4 nm as height and 2.25 nm as diameter), which differs drastically from the Pt clusters on γ-Al₂O₃/NiAl(1 1 0) observed earlier. These Pt cluster growth features are mostly attributed to smaller diffusion length and ease to form stable nucleus, arising from strong Pt-Pt and Pt-oxide interactions and the peculiar protrusion structures on the ordered Al₂O₃/NiAl(1 0 0). The thermal stability of Pt nanoclusters was also examined. The cluster density decreased monotonically with annealing temperature up to 1000 K at the expense of smaller clusters but coalescence is not observed.     

X-ray characterization of as-deposited, epitaxial films of Bi(0 1 2) on Au(1 1 1)

Electrodeposition is used to produce epitaxial single-crystal films on Au(1 1 1) substrates without annealing or other post-deposition modification. X-ray techniques show that the Bi(0 1 2) plane is parallel to the underlying Au(1 1 1) surface, and the azimuthal orientation of the films is determined. Combination of the X-ray data with in situ scanning tunneling microscopy (STM) images suggests a common growth mode from the first few layers up to thick films.     

Growth of Ce on Rh(1 1 1)

We have studied the growth of cerium films on Rh(1 1 1) using STM (scanning tunneling microscopy), LEED (low energy electron diffraction), XPS (X-ray photoelectron spectroscopy) and AES (Auger electron spectroscopy). Measurements of the Ce films after room temperature deposition showed that Ce is initially forming nanoclusters in the low coverage regime. These clusters consist of 12 Ce atoms and have the shape of pinwheels. At a coverage of 0.25 ML (monolayer, ML) an adatom layer with a (2 × 2) superstructure is observed. Above 0.4 ML, Rh is diffusing through pinholes into the film, forming an unstructured mixed layer. Annealing at 250 °C leads to the formation of ordered Ce-Rh compounds based on the bulk compound CeRh₃. At a coverage of 0.1 ML, small ordered (2 × 2) surface alloy domains are observed. The exchanged Rh atoms form additional alloy islands situated on the pure Rh(1 1 1) surface, showing the same (2 × 2) superstructure as the surface alloy. At a coverage of 0.25 ML, the surface is completely covered by the surface alloy and alloy islands. The (2 × 2) structure is equivalent to a (1 1 1)-plane of CeRh₃, contracted by 6%. Annealing a 1 ML thick Ce layer leads to a flat surface consisting of different rotational domains of CeRh₃(1 0 0). The Rh needed for alloy formation comes from 50 Å deep pits in the substrate. Finally we show that LEIS (low energy ion scattering) is not suitable for the characterization of Ce and CeRh films due to strong effects of neutralization.     

Ultra-thin Si overlayers on the TiO2 (1 1 0)-(1 × 2) surface: Growth mode and electronic properties

The growth of thin subnanometric silicon films on TiO₂ (1 1 0)-(1 × 2) reconstructed surfaces at room temperature (RT) has been studied in situ by X-ray and ultra-violet photoelectron spectroscopies (XPS and UPS), Auger electron and electron-energy-loss spectroscopies (AES and ELS), quantitative low energy electron diffraction (LEED-IV), and scanning tunneling microscopy (STM). For Si coverage up to one monolayer, a heterogeneous layer is formed. Its composition consists of a mixture of different suboxides SiO_x (1 < x ? 2) on top of a further reduced TiO₂ surface. Upon Si coverage, the characteristic (1 × 2) LEED pattern from the substrate is completely attenuated, indicating absence of long-range order. Annealing the SiO_x overlayer results in the formation of suboxides with different stoichiometry. The LEED pattern recovers the characteristic TiO₂ (1 1 0)-(1 × 2) diagram. LEED I-V curves from both, substrate and overlayer, indicate the formation of nanometric sized SiO_x clusters.     

Electronic properties of Au nano-particles supported on stoichiometric and reduced TiO2(1 1 0) substrates

Growth modes and electronic properties were analyzed for Au nano-particles grown on stoichiometric and reduced TiO₂(1 1 0) substrates by medium energy ion scattering (MEIS) and photoelectron spectroscopy(PES) using synchrotron-radiation-light. Initially, two-dimensional islands (2D) with a height of one and two atomic layers grow and higher coverage increases the islands height to form three-dimensional (3D) islands for the stoichiometric TiO₂(1 1 0) substrate. In contrast, 3D islands start to grow from initial stage with a small Au coverage (?0.1 ML, 1 ML = 1.39 × 10¹⁵  atoms/cm²: Au(1 1 1)) probably due to O-vacancies acting as a nucleation site. Above 0.7 ML, all the islands become 3D ones taking a shape of a partial sphere and the Au clusters change to metal for both substrates. We observed the Au 4f and Ti 3p core level shifts together with the valence band spectra. The Ti 3p peak for the O-deficient surface shifts to higher binding energy by 0.25 ± 0.05 eV compared to that for the stoichiometric surface, indicating downward band bending by an electron charge transfer from an O-vacancy induced surface state band to n-type TiO₂ substrate. Higher binding energy shifts of Au 4f peaks observed for both substrates reveal an electron charge transfer from Au to TiO₂ substrates. The work functions of Au nano-particles supported on the stoichiometric and reduced TiO₂ substrates were also determined as a function of Au coverage and explained clearly by the above surface and interface dipoles.     

Growth and morphology of the epitaxial Fe(1 1 0)/MgO(1 1 1)/Fe(1 1 0) Trilayers

Growth and surface morphology of epitaxial Fe(1 1 0)/MgO(1 1 1)/Fe(1 1 0) trilayers constituting a magnetic tunnel junction were investigated by low-energy electron diffraction (LEED) and scanning tunneling microscopy (STM). STM reveals a grain-like growth mode of MgO on Fe(1 1 0) resulting in dense MgO(1 1 1) films at room temperature as well as at 250 °C. As observed by STM, initial deposition of MgO leads to a partial oxidation of the Fe(1 1 0) surface which is confirmed by Auger electron spectroscopy. The top Fe layer deposited on MgO(1 1 1) at room temperature is relatively rough consisting of clusters which can be transformed by annealing to an atomically flat epitaxial Fe(1 1 0) film.     

Vanadium nanoclusters on Si(1 1 1) 7 × 7 surface studied by scanning tunneling microscopy

The size distribution and shape transition of self-assembled vanadium silicide clusters on Si(1 1 1) 7 × 7 have been investigated by scanning tunneling microscopy. Nanoclusters were formed by submonolayer vanadium deposition at room temperature followed by subsequent annealing (solid phase epitaxy - SPE). At room temperature, initially V-nanoclusters are formed which occupy sites avoiding the corner hole parts of the unit cells in the Si(1 1 1) 7 × 7 surface. Upon annealing, strong metal-silicon reaction occur leading to the formation of vanadium silicide nanoclusters. As a function of temperature, both, flat (2D) and three dimensional (3D) clusters have been obtained. After annealing at temperatures around 900 K many faceted clusters are created, whereas at higher annealing temperature, around 1300 K, predominantly 3D clusters are formed. The size distribution of SPE grown clusters could be well controlled in the range of 3-10 nm. The cluster size depends on the annealing temperature as well as on the initial vanadium coverage. Based on high resolution STM images a structure model for one kind of vanadium disilicide clusters exposing atomically flat surfaces was proposed.     

Plasma processing of the Si(0 0 1) surface for tuning SPR of Au/Si-based plasmonic nanostructures

Au nanoclusters have been deposited on Si(0 0 1) surfaces by sputtering of a metallic Au target using an Ar plasma. Different wet and dry treatments of the Si(0 0 1) surface, including dipping in HF solution and exposure to H₂ and N₂ plasmas, have been applied and the effects of these treatments on the Au nanoparticles/Si interface, the Au nanoclusters aspect ratio and the surface plasmon resonance (SPR) energy and amplitude are investigated exploiting spectroscopic ellipsometry and atomic force microscopy. It is found that the Au nanoclusters aspect ratio depends on the extent of the Au-Si intermixing. The thicker the Au-Si interface layer, the larger the Au nanoparticles aspect ratio and the red-shift of the SPR peak. Furthermore, SiO₂ and the H₂ plasma treatment inhibit the Si-Au intermixing, while HF-dipping and the N₂ plasma treatment favour Au-Si intermixing, yielding silicide formation which increases the Si wetting by Au.     

Herringbone and triangular patterns of dislocations in Ag, Au, and AgAu alloy films on Ru(0 0 0 1)

We have studied the dislocation structures that occur in films of Ag, Au, and Ag_0.5Au_0.5 alloy on a Ru(0 0 0 1) substrate. Monolayer (ML) films form herringbone phases while films two or more layers thick contain triangular patterns of dislocations. We use scanning tunneling microscopy (STM) and low-energy electron diffraction (LEED) to determine how the film composition affects the structure and periodicity of these ordered structures. One layer of Ag forms two different herringbone phases depending on the exact Ag coverage and temperature. Low-energy electron microscopy (LEEM) establishes that a reversible, first-order phase transition occurs between these two phases at a certain temperature. We critically compare our 1 ML Ag structures to conflicting results from an X-ray scattering study [H. Zajonz et al., Phys. Rev. B 67 (2003) 155417]. Unlike Ag, the herringbone phases of Au and AgAu alloy are independent of the exact film coverage. For two layer films in all three systems, none of the dislocations in the triangular networks thread into the second film layer. In all three systems, the in-plane atomic spacing of the second film layer is nearly the same as in the bulk. Film composition does, however, affect the details of the two layer structures. Ag and Au films form interconnected networks of dislocations, which we refer to as “trigons.” In 2 ML AgAu alloy, the dislocations form a different triangular network that shares features of both trigon and moiré structures. Yet another well-ordered structure, with square symmetry, forms at the boundaries of translational trigon domains in 2 ML Ag films but not in Au films.     

Phase transition of thiophene molecules on Au(1 1 1) in solution

The orientation and packing arrangement of thiophene molecules on a well-defined Au(1 1 1) surface in 0.1 M HClO₄ solution have been investigated as a function of applied potentials by in situ scanning tunneling microscopy (STM) and electrochemical method. Thiophene molecules are found to form highly ordered adlayers in the double layer region. High-resolution STM images reveal different adlayer structures. Thiophene molecules take flat-lying and vertical orientation at 0.3 and 0.6 V, respectively. Compared with the results of electrochemical measurement, we concluded that the phase transition of thiophene on Au(1 1 1) occurs as the potential is changed between 0.1 and 0.65 V.     

Alloy formation in the Au{1 1 1}/Ni system - An investigation with scanning tunnelling microscopy and medium energy ion scattering

Using the techniques of scanning tunnelling microscopy (STM) and medium energy ion scattering (MEIS), we examine the growth and annealing behaviour of ultrathin Ni films on Au{1 1 1} at 300 K. As has been shown previously, submonolayer growth of Ni on Au{1 1 1} is strongly influenced by the presence of the herringbone reconstruction with two-dimensional clusters nucleating at herringbone elbows. Second layer growth commences prior to the completion of the monolayer. After multiple layers have been deposited, the surface morphology retains a similar cluster-like appearance. Annealing produces surfaces exhibiting long range Moiré structures and, at higher temperature, triangular misfit dislocations. We use MEIS to examine the composition and structure of these surface alloy phases and conclude that in each case, they consist of an essentially pure Au surface layer on a bimetallic second layer.     

Dimerization of three xanthene dyes on Au(1 1 1) surface

The adsorption structures of three xanthene dyes (rhodamine B (Rh B), fluorescein and eosin) on Au(1 1 1) in HClO₄ solution, have been investigated by in situ scanning tunneling microscopy (STM) and cyclic voltammetry. High-resolution STM images reveal the molecular orientation and packing arrangement in the ordered adlayers. A (5 × 10) structure is found on Rh B adlayer. (5 × 8) structures are observed on fluorescein and eosin adlayers, respectively. An intriguing aspect of this work is that three xanthene molecules form dimeric structures on Au(1 1 1) surface. The electrostatic interaction and van der Waals force are responsible to the dimeric formation of Rh B, while the interaction between Br atoms and hydrogen bond correspond to the dimerization of eosin and fluorescein, respectively. The structural models are tentatively proposed for the three ordered adlayers. The results obtained will be helpful to understand the interaction mechanism of dimerization and the degradation mechanism of dye pollutant.     

Probing the interactions of Pt, Rh and bimetallic Pt-Rh clusters with the TiO2(1 1 0) support

Pt, Rh, and Pt-Rh clusters on TiO₂(1 1 0) have been investigated by scanning tunneling microscopy (STM), soft X-ray photoelectron spectroscopy (sXPS), and low energy ion scattering (LEIS). The surface compositions of Pt-Rh clusters are Pt-rich (66-80% Pt) for room temperature deposition of both 2 ML of Pt on 2 ML of Rh (Rh + Pt) and 2 ML of Rh on 2 ML of Pt (Pt + Rh). Pt and Rh atoms readily diffuse within the clusters at room temperature, and although diffusion is slower at 240 K, intermixing of Pt and Rh still occurs. The binding energies of surface and bulk states for Rh(3d_5/2) and Pt(4f_7/2) can be distinguished in sXPS studies, and an analysis of these spectra indicates that the surface compositions of the Pt + Rh and Rh + Pt clusters are similar at room temperature but not identical. In addition to sintering, the pure Pt, pure Rh and Pt-Rh clusters become completely encapsulated by titania upon heating to 700 K. sXPS investigations show that annealing the clusters to 850 K induces reduction of titania support to Ti⁺² and Ti⁺³, with the extent of reduction being the greatest for Pt, the least for Rh and intermediate for Pt-Rh. We propose that TiO₂ is reduced at the metal-titania interface on top of the clusters, not at the base of the clusters. Furthermore, the extent of titania reduction is greater for metal clusters with weaker metal-oxygen bonds because oxygen atoms are less likely to migrate to the top of the clusters, and therefore the encapsulating titania is oxygen-deficient.     

In situ scanning tunneling microscopy studies of bimetallic cluster growth: Pt-Rh on TiO2(1 1 0)

The growth of Pt on clusters on TiO₂(1 1 0) in the presence and absence of Rh was investigated by scanning tunneling microscopy (STM) for Pt deposited on top of 0.3 ML Rh clusters (Rh + Pt). In situ STM studies of Pt growth at room temperature show that bimetallic clusters are produced when Pt is directly incorporated into existing Rh clusters or when newly nucleated clusters of pure Pt coalesce with existing Rh clusters. Low energy ion scattering experiments demonstrate that Rh is still present at the surface of the clusters even after deposition of 2 ML of Pt, indicating that Rh atoms can diffuse to the cluster surface at room temperature. Rh clusters were found to seed the growth of Pt clusters at room temperature as well as 100 K and 450 K. Furthermore, clusters as large as 100 atoms were observed to be mobile on the surface at room temperature and 450 K, but not at 100 K. Pt deposition at 100 K exhibited more two-dimensional cluster growth and higher cluster densities compared to room temperature experiments due to the lower diffusion rate. Increased diffusion rates at 450 K resulted in more three-dimensional cluster growth and lower densities for pure Pt growth, but cluster densities for Pt + Rh growth were the same as at room temperature.     

Structures of Co and Pt nanoclusters on a thin film of Al2O3/NiAl(1 0 0) from reflection high-energy electron diffraction and scanning-tunnelling microscopy

With reflection high-energy electron diffraction (RHEED) and scanning-tunnelling microscopy (STM), we made measurements on Co and Pt nanoclusters grown by vapour deposition on a thin film of Al₂O₃/NiAl(1 0 0). The results show that the annealed Co nanoclusters (with mean diameters 2.5, 3.4, 5.8 nm and heights 0.7, 1.5, 1.5 nm, respectively) and Pt nanoclusters (with mean diameter 2.25 nm and height 0.4 nm) are highly crystalline and that their structures are significantly affected by the oxide substrate. Structural analysis based on the RHEED patterns indicates that both Co and Pt clusters have a fcc phase and grow with their (0 0 1) facets parallel to the θ-Al₂O₃(1 0 0) surfaces, and with their [1 1 0] and [−1 1 0] axes along the [0 1 0] and [0 0 1] directions of the oxide surface, respectively, so (Co(0 0 1)[1 1 0]∥Al₂O₃(1 0 0)[0 1 0] and Pt(0 0 1)[1 1 0]∥Al₂O₃(1 0 0)[0 1 0]). This growth is optimal as the Co and Pt fcc (0 0 1) facets match well with the oxygen mesh. To minimize the lattice mismatch, the lattice parameter of the Co clusters expands 4-5% relative to fcc Co bulk, whereas the lattice parameter of the Pt clusters remains near the bulk value, as the Pt fcc (0 0 1) plane has a close lattice match with the oxide surface.     

Growth and structure of vanadium oxide on anatase (1 0 1) terraces

The interaction of vanadium oxide with epitaxial anatase films exposing (1 0 1) terraces was characterized. The TiO₂ films were grown on vicinal LaAlO₃ (1 1 0) substrates by oxygen plasma-assisted molecular beam epitaxy (OPA-MBE); reflection high energy and low energy electron diffraction (RHEED and LEED) indicated that the films exposed (1 0 1) terraces of the anatase TiO₂ polymorph. When a vanadium oxide monolayer was deposited onto the anatase surface by OPA-MBE at 725 K, only (1 × 1) RHEED and LEED patterns were observed. The V X-ray photoelectron spectroscopy (XPS) peak intensities indicated that the monolayer wetted the anatase surface and so the diffraction patterns were attributed to an epitaxial vanadia layer. Analysis of the vanadium oxide monolayer by X-ray and ultraviolet photoelectron spectroscopies revealed that the V was predominantly 5+. When the vanadia coverage was increased at 725 K, Auger electron spectra showed only very slow attenuation of the anatase Ti peaks while spots began to develop in RHEED patterns recorded along the LaAlO₃ direction; both indicative of 3-D cluster formation. In the orthogonal direction, the RHEED patterns showed unusual diagonal streaks. Meanwhile, the (1 × 1) LEED pattern persisted even after 30 nm of vanadia was deposited. This was attributed to gaps between the 3-D clusters exposing the epitaxial monolayer. Core level XPS spectra of the 3-D clusters revealed a broad V 2p_3/2 peak that was centered at the position expected for V⁴⁺ but could be deconvoluted into three peaks corresponding to V³⁺, V⁴⁺, and V⁵⁺. It is shown that crystallographic shear that accommodates such variations in the oxygen content of V oxides can lead to the diagonal streaks in RHEED patterns recorded along the LaAlO₃ [0 0 1] direction even as the pattern in the orthogonal direction shows sharp transmission spots. The results show that vanadia growth on anatase (1 0 1) proceeds through the Stranski-Krastanov mode with a strong vanadia-titania interaction stabilizing a dispersed vanadia monolayer. The results are compared with previous data for vanadia growth on anatase (0 0 1) where smooth, epitaxial VO₂ films grow ad infinitum.     

Epitaxial growth of Co(0 0 0 1)hcp/Fe(1 1 0)bcc magnetic bi-layer films on SrTiO3(1 1 1) substrates

Co(0 0 0 1)_hcp/Fe(1 1 0)_bcc epitaxial magnetic bi-layer films were successfully prepared on SrTiO₃(1 1 1) substrates. The crystallographic properties of Co/Fe epitaxial magnetic bi-layer films were investigated. Fe(1 1 0)_bcc soft magnetic layer grew epitaxially on SrTiO₃(1 1 1) substrate with two type variants, Nishiyama–Wasserman and Kurdjumov–Sachs relationships. An hcp-Co single-crystal layer is obtained on Ru(0 0 0 1)_hcp interlayer, while hcp-Co layer formed on Au(1 1 1)_fcc or Ag(1 1 1)_fcc interlayer is strained and may involve fcc-Co phase. It has been shown possible to prepare Co/Fe epitaxial magnetic bi-layer films which can be usable for patterned media application.