Mixed water/OH structures on Pd(1 1 1)

Chemisorbed O and water react on Pd(1 1 1) at low temperatures to form a mixed OH/H₂O layer with a (√3 × √3)R30° registry. Reaction requires at least two water molecules to each O before the (2 × 2)O islands are consumed, the most stable OH/water structure being a (OH + H₂O) layer containing 0.67 ML of oxygen, formed by the reaction 3H₂O + O → 2(H₂O + OH). This structure is stabilised compared to pure water structures, decomposing at 190 K as OH recombines and water desorbs. The (√3 × √3)R30° − (OH + H₂O) phase cannot be formed by O/H reaction and is distinct from the (√3 × √3)R30° structure formed by O/H coadsorption below 200 K. Mixed OH/water structures do not react with coadsorbed H below 190 K on Pd(1 1 1), preventing this phase catalyzing the low temperature H₂/O₂ reaction which only occurs at higher temperatures.     

Theoretical studies on the adsorption and decomposition of H2O on Pd(1 1 1) surface

To provide information about the chemistry of water on Pd surfaces, we performed density functional slab model studies on water adsorption and decomposition at Pd(1 1 1) surface. We located transition states of a series of elementary steps and calculated activation energies and rate constants with and without quantum tunneling effect included. Water was found to weakly bind to the Pd surface. Co-adsorbed species OH and O that are derivable from H₂O stabilize the adsorbed water molecules via formation of hydrogen bonds. On the clean surface, the favorable sites are top and bridge for H₂O and OH, respectively. Calculated kinetic parameters indicate that dehydrogenation of water is unlikely on the clean regular Pd(1 1 1) surface. The barrier for the hydrogen abstraction of H₂O at the OH covered surface is approximately 0.2-0.3 eV higher than the value at the clean surface. Similar trend is computed for the hydroxyl group dissociation at H₂O or O covered surfaces. In contrast, the O-H bond breaking of water on oxygen covered Pd surfaces, H₂O_ad + O_ad → 2OH_ad, is predicted to be likely with a barrier of ∼0.3 eV. The reverse reaction, 2OH_ad → H₂O_ad + O_ad, is also found to be very feasible with a barrier of ∼0.1 eV. These results show that on oxygen-covered surfaces production of hydroxyl species is highly likely, supporting previous experimental findings.     

A first-principles study of C + O reaction on NiCo(1 1 1) surface

A density-functional theory method has been conducted to investigate the association of C + O on (1 1 1) facets of ordered NiCo alloy and the results have been compared with those obtained on pure Ni(1 1 1) surface. In reaction of C + O, the favorable reaction path is that C adsorbed on HCP-1 site moves to the nearest Ni-Co bridge site, and associates with O migrating from FCC-1 site to result in CO adsorbed on the bridge site of Ni-Co. However, the reaction barrier is higher by 0.35 eV than that on pure Ni(1 1 1), which indicates that the incorporation of Co into the Ni crystal is not in favor of the reaction of carbon delimination.     

Growth of epitaxial thin Pd(1 1 1) films on Pt(1 1 1) and oxygen-terminated FeO(1 1 1) surfaces

Thin Pd films (1-10 monolayers, ML) were deposited at 35 K on a Pt(1 1 1) single crystal and on an oxygen-terminated FeO(1 1 1) monolayer supported on Pt(1 1 1). Low energy electron diffraction, Auger electron spectroscopy, and Kr and CO temperature programmed desorption techniques were used to investigate the annealing induced changes in the film surface morphology. For growth on Pt(1 1 1), the films order upon annealing to 500 K and form epitaxial Pd(1 1 1). Further annealing above 900 K results in Pd diffusion into the Pt(1 1 1) bulk and Pt-Pd alloy formation. Chemisorption of CO shows that even the first ordered monolayer of Pd on Pt(1 1 1) has adsorption properties identical to bulk Pd(1 1 1). Similar experiments conducted on FeO(1 1 1) indicate that 500 K annealing of a 10 ML thick Pd deposit also yields ordered Pd(1 1 1). In contrast, annealing of 1 and 3 ML thick Pd films did not result in formation of continuous Pd(1 1 1). We speculate that for these thinner films Pd diffuses underneath the FeO(1 1 1).     

Infrared reflection absorption study of carbon monoxide adsorption on Pd/Cu(1 1 1)

Pd-Cu bimetallic surfaces formed through a vacuum-deposition of Pd on Cu(1 1 1) have been discussed on the basis of carbon monoxide (CO) adsorption: CO is used as a surface probe and infrared reflection absorption (IRRAS) spectra are recorded for the CO-adsorbed surfaces. Low energy electron diffraction (LEED) patterns for the bimetallic surfaces reveal six-fold symmetry even after the deposition of 0.6 nm. The lattice spacings estimated by the separations of reflection high-energy electron diffraction (RHEED) streaks increase with increasing Pd thickness. Room-temperature CO exposures to the bimetallic surfaces formed by the Pd depositions less than 0.3 nm thickness generate the IRRAS bands due to the three-fold-hollow-, bridge- and linear-bonded CO to Pd atoms. In particular, on the 0.1 nm-thick Pd surface, the linear-bonded CO band becomes apparent at an earlier stage of the exposure. In contrast, the bridge-bonded CO band dominates the IRRAS spectra for CO adsorption on the 0.6 nm-thick Pd surface, at which the lattice spacing corresponds to that of Pd(1 1 1). A 90 K-CO exposure to the 0.1 nm-thick Pd surface leads to the IRRAS bands caused not only by CO-Pd but also by CO-Cu, while the Cu-related band is almost absent from the spectra for the 0.3 nm-thick Pd surface. The results clearly reveal that local atomic structures of the outermost bimetallic surface can be discussed by the IRRAS spectra for the probe molecule.     

Stability of ZnO{0 0 0 1} against low energy ion bombardment

The steady-state surface compositions of the polar (O and Zn terminated) faces of ZnO{0 0 0 1} produced by low energy (0.3-2 keV) Ar⁺ ion bombardment were studied by Auger electron spectroscopy and electron energy loss spectroscopy. The alterations produced by the ion bombardment using different ion energies were monitored by calculating the intensity ratios of the low and high energy Zn Auger peaks (59 eV and 994 eV, respectively); Zn and O Auger peaks (59 eV and 510 eV, respectively). Based on the dependence of these ratios on the ion energy and termination of the surface, we could conclude that the stability of the Zn face is higher against the low energy argon ion bombardment-induced compositional changes than that of the O face.     

Formation of single layer h-BN on Pd(1 1 1)

The structure of hexagonal boron nitride (h-BN) on Pd(1 1 1) was studied with low energy electron diffraction (LEED), photoelectron spectroscopy and scanning tunnelling microscopy (STM). h-BN forms flat monolayers on the Pd(1 1 1) surface in contrast to Rh(1 1 1) where a complex self-assembled double layer structure, the nanomesh [M. Corso, W. Auwärter, M. Muntwiler, A. Tamai, T. Greber, J. Osterwalder, Science 303 (2004) 217], appears. The LEED patterns reveal a dominating 10 × 10 h-BN superstructure, with a second, distinct structure rotated by 30° and further azimuthally randomly oriented h-BN overlayers. This is consistent with STM images which show several different Moiré patterns associated with different rotation angles of the overlayer. Additionally the use of thin Pd(1 1 1) films instead of single crystal substrates was studied. No significant differences in the h-BN film quality were found.     

Diffusion properties of Cu(0 0 1)-c(2 × 2)-Pd surface alloys

Structural and diffusion properties of a Cu(0 0 1)-c(2 × 2)-Pd surface and sub-surface ordered alloys are studied by using interaction potentials obtained from the embedded-atom method. The calculated diffusion energies are in agreement with observed kinetics of the surface alloy formation and confirm stability of the underlayer alloy. Activation energy of planar diffusion of palladium at the initial stage of the alloy formation as well as the activation energy of the overlayer-underlayer diffusion of the Pd atoms are in good agreement with those obtained by the scanning tunneling microscopy and low energy electron diffraction measurements, respectively.     

Methanol adsorption on Pd(1 1 0) and Ag/Pd(1 1 0) studied by high-resolution photoelectron spectroscopy

Adsorption of methanol on clean Pd(1 1 0) and on an alloyed Ag/Pd(1 1 0) surface has been studied by high-resolution photoelectron spectroscopy. On Pd(1 1 0) two different chemisorbed methanol species were observed for temperatures up to 200 K, with the one at lower binding energy remaining at low coverage. These species were attributed to methanol adsorbed in two different adsorption sites on the Pd(1 1 0) surface. As is well established for this system, heating to 250 K resulted in decomposition of methanol into CO. The adsorption and decomposition behaviour of methanol on the Ag/Pd(1 1 0) surface alloy formed by depositing Ag on Pd(1 1 0) at elevated temperature was similar to that of the pure Pd(1 1 0) surface. This suggests that the amount of Ag present in the Pd(1 1 0) surface in this study does not affect the decomposition behaviour of methanol as compared to pure Pd(1 1 0). Complementary density functional theory calculations also show little influence of Ag on the binding of methanol to Pd. These calculations predict an on-top adsorption site for low methanol coverages.     

Adsorption and decomposition of NO on K-deposited Pd(1 1 1)

The adsorption and decomposition of NO on a K-deposited Pd(1 1 1) surface were investigated using X-ray photoelectron spectroscopy, infrared reflection absorption spectroscopy, and temperature-programmed desorption. For the K-deposited Pd(1 1 1) surface, two different NO adsorption sites were observed in addition to the Pd site. On the clean Pd(1 1 1) surface, the adsorption of NO was purely molecular and reversible, but on the K-deposited surface, the adsorbed NO decomposed at two different temperatures, 530 and 610 K. These results indicate that the NO adsorption and decomposition sites were newly created by the deposition of K onto the Pd(1 1 1) surface.     

Pd adsorption on Si(1 1 3) surface: STM and XPS study

Pd-induced surface structures on Si(1 1 3) have been studied by scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS). In the initial process of the Pd adsorption below 0.10 ML, Pd silicide (Pd₂Si) clusters are observed to form randomly on the surface. By increasing the Pd coverage to 0.10 ML, the clusters cover the entire surface, and an amorphous layer is formed. After annealing the Si(1 1 3)-Pd surface at 600 °C, various types of islands and chain protrusions appears. The agglomeration, coalescence and crystallization of these islands are observed by using high temperature (HT-) STM. It is also found by XPS that the islands correspond to Pd₂Si structure. On the basis of these results, evolution of Pd-induced structures at high temperatures is in detail discussed.     

Reconstructed (1 1 0) surfaces of FCC transition metals

The energies of the ideal, missing row (MR) and missing column (MC) (1 1 0) surfaces have been calculated by using modified embedded atom method (MEAM) for seven face centered cubic (FCC) transition metals Au, Pt, Ag, Pd, Rh, Cu and Ni. The results, that the MC reconstruction can not be formed for all metals, while the MR reconstruction can be formed naturally for Au and Pt, inductively for Ag, Pd, Rh and Cu and difficultly for Ni, are better than EAM calculated results in comparing with experimental results. In addition to the surface energy explanation, the results are also related to the surface topography and valence electron structure.     

Reaction mechanism for CO oxidation on Cu(3 1 1): A density functional theory study

The microscopic reaction mechanism for CO oxidation on Cu(3 1 1) surface has been investigated by means of comprehensive density functional theory (DFT) calculations. The elementary steps studied include O₂ adsorption and dissociation, dissociated O atom adsorption and diffusion, as well as CO adsorption and oxidation on the metal. Our results reveal that O₂ is considerably reactive on the Cu(3 1 1) surface and will spontaneously dissociate at several adsorption states, which process are highly dependent on the orientation and site of the adsorbed oxygen molecule. The dissociated O atom may likely diffuse via inner terrace sites or from a terrace site to a step site due to the low barriers. Furthermore, we find that the energetically most favorable site for CO molecule on Cu(3 1 1) is the step edge site. According to our calculations, the reaction barrier of CO + O → CO₂ is about 0.3 eV lower in energy than that of CO + O₂ → CO₂ + O, suggesting the former mechanism play a main role in CO oxidation on the Cu(3 1 1) surface.     

Interaction of 2,2,6,6-tetramethyl-3,5-heptanedione with the Si(1 0 0)-2 × 1 surface: Scanning tunneling microscopy and density functional theory study

Room temperature adsorption and reaction of 2,2,6,6-tetramethyl-3,5-heptanedione (dpmH) on the Si(1 0 0)-2 × 1 surface has been studied with ultra-high vacuum scanning tunneling microscopy (UHV-STM) and temperature programmed desorption (TPD). The molecule is found to chemisorb as a mixture of at least five distinct species. Density functional theory (DFT) was used to calculate the structures and adsorption energies of 12 possible addition products. Unique bonding assignments for each experimental feature are proposed by consideration of a common intermediate reaction network, and a comparison of possible reaction pathways leading to the final products. These assignments are: OH inter-dimer dissociation, OH intra-dimer dissociation, 1,5 intra-dimer addition, 1,5 inter-dimer addition, and intra-dimer [2 + 2]CO addition with OH dissociation on an adjacent dimer. TPD and STM results show that the molecule dissociates completely upon annealing to 700 °C with formation of the c(4 × 4) phase at low exposures, and SiC islands for exposures exceeding 0.15 L.     

Growth and morphology of the epitaxial Fe(1 1 0)/MgO(1 1 1)/Fe(1 1 0) Trilayers

Growth and surface morphology of epitaxial Fe(1 1 0)/MgO(1 1 1)/Fe(1 1 0) trilayers constituting a magnetic tunnel junction were investigated by low-energy electron diffraction (LEED) and scanning tunneling microscopy (STM). STM reveals a grain-like growth mode of MgO on Fe(1 1 0) resulting in dense MgO(1 1 1) films at room temperature as well as at 250 °C. As observed by STM, initial deposition of MgO leads to a partial oxidation of the Fe(1 1 0) surface which is confirmed by Auger electron spectroscopy. The top Fe layer deposited on MgO(1 1 1) at room temperature is relatively rough consisting of clusters which can be transformed by annealing to an atomically flat epitaxial Fe(1 1 0) film.     

Surface (electro-)chemistry on Pt(1 1 1) modified by a Pseudomorphic Pd monolayer

The formic acid and methanol oxidation reaction are studied on Pt(1 1 1) modified by a pseudomorphic Pd monolayer (denoted hereafter as the Pt(1 1 1)-Pd_1 ML system) in 0.1 M HClO₄ solution. The results are compared to the bare Pt(1 1 1) surface. The nature of adsorbed intermediates (CO_ad) and the electrocatalytic properties (the onset of CO₂ formation) were studied by FTIR spectroscopy. The results show that Pd has a unique catalytic activity for HCOOH oxidation, with Pd surface atoms being about four times more active than Pt surface atoms at 0.4 V. FTIR spectra reveal that on Pt atoms adsorbed CO is produced from dehydration of HCOOH, whereas no CO adsorbed on Pd can be detected although a high production rate of CO₂ is observed at low potentials. This indicates that the reaction can proceed on Pd at low potentials without the typical “poison” formation. In contrast to its high activity for formic acid oxidation, the Pd film is completely inactive for methanol oxidation. The FTIR spectra show that neither adsorbed CO is formed on the Pd sites nor significant amounts of CO₂ are produced during the electrooxidation of methanol.     

Hydrogen adsorption on GaAs(0 0 1)-c(4 × 4)

Exposure of the As-terminated GaAs(0 0 1)-c(4 × 4) reconstructed surface to atomic hydrogen (H) at different substrate temperatures (50-480 °C) has been studied by reflection high-energy electron diffraction (RHEED) and scanning tunnelling microscopy (STM). Hydrogen exposure at low temperatures (∼50 °C) produces a disordered (1 × 1) surface covered with AsH_x clusters. At higher temperatures (150-400 °C) exposure to hydrogen leads to the formation of mixed c(2 × 2) and c(4 × 2) surface domains with H adsorbed on surface Ga atoms that are exposed due to the H induced loss of As from the surface. At the highest temperature (480 °C) a disordered (2 × 4) reconstruction is formed due to thermal desorption of As from the surface. The results are consistent with the loss of As from the surface, either through direct thermal desorption or as a result of the desorption of volatile compounds which form after reaction with H.     

Surface composition and structure of palladium ultra-thin films deposited on Ni(1 1 1)

Ultra-thin palladium films deposited on the Ni(1 1 1) surface were characterized by X-ray photoelectron spectroscopy (XPS), low-energy electron diffraction (LEED) and X-ray photoelectron diffraction (XPD). For low coverage, LEED shows a (1 × 1) pattern similar to that of the substrate. For intermediate coverage, the LEED pattern displays extra spots around the main (1 × 1) spots, resembling a Moiré coincidence pattern, probably associated with the formation of Pd bi-dimensional islands oriented in different directions on the Ni(1 1 1) surface. The results obtained by XPS and XPD corroborate this finding. The LEED pattern displays this structure up to 500 °C. Annealing at 650 °C brings back the (1 × 1) pattern, which is associated with a Pd island coalescence and alloy formation by Pd diffusion in the first atomic layers of the Ni(1 1 1). In this paper we present a detailed study of this surface structure via a comparison between XPD experiment and theory.     

Determination of deuterium adsorption site on palladium(1 0 0) using low energy ion recoil spectroscopy

Ion beam analysis has been recently applied to study the adsorption phenomena of some adsorbates on metal surfaces. In this paper, surface recoils created by low energy Ne⁺ ions are employed to study the adsorption site of deuterium (D) atoms on Pd(1 0 0). This technique is extremely surface sensitive with the capacity for atomic layer depth resolution. From azimuthal angle observations of Pd(1 0 0) specimen, it was found that at room temperature, D was adsorbed in the fourfold hollow site of Pd(1 0 0) at a height of 0.25 ± 0.05 Å above the surface. The adsorbate remains in the hollow site at all temperatures to 383 K though the vertical height above the surface is found to depend on coverage and for the first time evidence is found of a transition to a p(2 × 2) structure for the adsorbate. There is no evidence of D sitting in the Pd(1 0 0) subsurface at room and higher temperatures.     

Mass and lattice effects in trapping: Ar, Kr, and Xe on Pt(1 1 1), Pd(1 1 1), and Ni(1 1 1)

The trapping probabilities of argon, krypton, and xenon on Pd(1 1 1) and Ni(1 1 1) have been investigated using supersonic molecular beam techniques. The trapping probability of argon exhibits normal incident energy in a similar fashion on both Pd(1 1 1) and Pt(1 1 1) because the mass of argon is significantly less than the surface mass of either Pd or Pt. In contrast, dynamic corrugation in the gas-surface potential is observed for krypton trapping on Pt(1 1 1) and Pd(1 1 1), resulting in a decreased angular dependence of the trapping probability compared to argon. For xenon trapping on Pd significant lattice deformation during the gas-surface collision appears to give rise to total energy scaling. The trapping probability of xenon on Pd(1 1 1) remains high at unusually high incident kinetic energies due to the overall enhanced energy transfer from the incident atom to the lattice. Trapping probabilities of Ar, Kr, and Xe are significantly lower on Ni(1 1 1) than on either Pt(1 1 1) or Pd(1 1 1) despite the lower surface mass of the Ni atoms. This result is attributed to the lower binding energy of the rare gases on Ni(1 1 1) and the higher Debye temperature of Ni. The energy scaling of Ar trapping on Ni(1 1 1) is determined by static corrugation, but the energy scaling for Kr and Xe on Ni(1 1 1) may involve the effects of dynamic corrugation. In the latter cases, the greater stiffness of the nickel lattice decreases the dynamic corrugation relative to Pt(1 1 1) and Pd(1 1 1).