Single-walled carbon nanotubes as stationary phase in gas chromatographic separation and determination of argon, carbon dioxide and hydrogen

A chromatographic technique is introduced based on single-walled carbon nanotubes (SWCNTs) as stationary phase for separation of Ar, CO₂ and H₂ at parts per million (ppm) levels. The efficiency of SWCNTs was compared with solid materials such as molecular sieve, charcoal, multi-walled carbon nanotubes and carbon nanofibers. The morphology of SWCNTs was optimized for maximum adsorption of H₂, CO₂ and Ar and minimum adsorption of gases such as N₂, O₂, CO and H₂O vapour. To control temperature of the gas chromatography column, peltier cooler was used. Mixtures of Ar, CO₂ and H₂ were separated according to column temperature program. Relative standard deviation for nine replicate analyses of 0.2 mL H₂ containing 10 μL of each Ar or CO₂ was 2.5% for Ar, 2.8% for CO₂ and 3.6% for H₂. The interfering effects of CO, and O₂ were investigated. Working ranges were evaluated as 40-600 ppm for Ar, 30-850 ppm for CO₂ and 10-1200 ppm for H₂. Significant sensitivity, small relative standard deviation (RSD) and acceptable limit of detection (LOD) were obtained for each analyte, showing capability of SWCNTs for gas separation and determination processes. Finally, the method was used to evaluate the contents of CO₂ in air sample.     

Application of programmable temperature vaporisation injection with resistive heating-gas chromatography flame photometric detection for the determination of organophosphorus pesticides

The combination of a programmable temperature vaporisation (PTV) injector with resistive heating GC (RH-GC), a form of fast GC, has been applied to the analysis of organophosphorus (OP) pesticides. The PTV injector was optimised in the 'at-once' solvent vent mode for the injection of ethyl acetate (10-40 microL) or ACN (10 microL). The short RH-GC column (5 m x 0.25 mm ID) with fast temperature ramps (up to 153 degrees C/ min) allowed the separation of a total of 20 OP pesticides in less than 6 min. Average recoveries between 67 and 119% were obtained for pesticides spiked at 0.01 mg/kg into apple and pear matrix. Extraction of orange juice with ACN provided higher recoveries (92-104%) for methamidophos, acephate and omethoate compared to ethyl acetate (62-73%). Results for analysis of OP pesticides in samples containing incurred residues were in good agreement with those obtained using GC-MS. The overall method was rapid, allowing 20 samples to be analysed in 4 h.     

离子液体和碳纳米管作为混合气相色谱固定相的研究与应用

将离子液体[BuMIm][PF6]和碳纳米管作为混合气相色谱固定相,制备了一种新型毛细管气相色谱柱。结果表明:该柱固定相麦氏常数的平均值为408;在容量因子大于2的前提下,新型柱的塔板数可达2270块/m;最高使用柱温为200℃;用该柱对苯系物标准样品进行了定性分离和定量测定,结果显示出良好的相关性,相对标准偏差范围为3.3%~5.3%,相对误差为2.6%~4.2%。表明该柱具有一定的应用前景。     

Carbon nanotube and carbon nanorod-filled polyacrylonitrile electrospun stationary phase for ultrathin layer chromatography

The application of carbon nanotube or nanorod/polyacrylonitrile (PAN) composite electrospun nanofibrous stationary phase for ultrathin layer chromatography (UTLC) is described herein. Multi-walled carbon nanotubes (MWCNTs) and edge-plane carbon (EPC) nanorods were prepared and electrospun with the PAN polymer solution to form composite nanofibers for use as a UTLC stationary phase. The analysis of laser dyes demonstrated the feasibility of utilizing carbon nanoparticle-filled electrospun nanofibers as a UTLC stationary phase. The contribution of MWCNT or EPC in changing selectivity of the stationary phase was studied by comparing the chromatographic behavior among MWCNT–PAN plates, EPC–PAN plates and pure PAN plates. Carbon nanoparticles in the stationary phase were able to establish strong π–π interactions with aromatic analytes. The separation of five polycyclic aromatic hydrocarbons (PAHs) demonstrated enhanced chromatographic performance of MWCNT-filled stationary phase by displaying substantially improved resolution and separation efficiency. Band broadening of the spots for MWCNT or EPC-filled UTLC stationary phases was also investigated and compared with that for pure PAN stationary phases. A 50% improvement in band dispersion was noted using the MWCNT based composite nanofibrous UTLC plates.     

High-speed countercurrent chromatography for purification of single-walled carbon nanotubes

A new chromatographic purification of single-walled carbon nanotubes using high-speed countercurrent chromatography is reported. The purification was accomplished on the basis of experiment that dispersed the single-walled carbon nanotubes with sodium dodecyl sulfate, and the result mixture was separated using the two phase system composed of n-butanol/water = 1/1 （v/v）. The sizes of SWNTs separated were observed by scanning electron microscopy. The results demonstrated that the high-speed countercurrent chromatography possessed a good efficency for purification of single-walled carbon nanotubes.     

Application of multiwalled carbon nanotubes for the preconcentration and determination of organochlorine pesticides in water samples by gas chromatography with mass spectrometry

A fast, sensitive, and convenient technique consisting of a miniaturized solid‐phase extraction method named microextraction in packed syringe coupled with gas chromatography and mass spectrometry was developed for the preconcentration and determination of some pesticides, including hexachlorobenzene, heptachlor, alachlor, aldrine, and metolachlore, in natural water samples. Carboxyl‐purified multiwalled carbon nanotubes were used as a sorbent in microextraction in packed syringe. Based on this technique, 6.0 mg of multiwalled carbon nanotubes was inserted in the syringe between two polypropylene frits. The analytes would be adsorbed on the solid phase, and would subsequently be eluted using organic solvents. The influence of some important parameters involved including the solution pH, type, and volume of the organic desorption solvent, and amount of the multiwalled carbon nanotubes sorbent on the extraction efficiency of the selected pesticides were investigated. The proposed method showed a good linearity in the range of 0.1–25.0 ng/mL and low limits of detection in the range of 0.02–0.19 ng/mL using the selected ion‐monitoring mode. Reproducibility of the method was in the range of 3.3–8.5% for the studied pesticides. Also to evaluate the matrix effect, the developed method was applied to the preconcentration and determination of the selected pesticides in different water samples.     

Capillary column coated with graphene oxide as stationary phase for gas chromatography

The graphene oxide (GO) is carbon based material that has high surface area, high adsorption ability, and is stable at high temperature. In this work, the GO phase was prepared and used for gas chromatographic separation. GO nanosheets were covalently bonded onto the inner surface of fused silica capillary column using 3-aminopropyldiethoxymethyl silane as cross-linking agent. The prepared GO nanosheets were characterized with TEM and the GO coating was characterized with SEM. As a high performance stationary phase, GO provides not only a high surface area to increase the phase ratio but also rich functional groups for the formation of hydrophobicity, hydrogen bonding, and π–π electrostatic stacking interactions with volatile aromatic or unsaturated organic compounds. Thus, mixtures of a wide range of organic compounds including alcohols and aromatic compounds were well separated and an efficiency of 1990 theoretical plates per meter for anisole was obtained on GO coated 1.0 m × 200 μm i.d. fused silica capillary column. The experimental results demonstrate that GO coated capillary columns are promising for gas chromatographic separation.     

Evaporation of the liquid stationary phase in gas chromatography

Summary The theory of the evaporation of the liquid stationary phase is elaborated and experimentally verified. On the basis of this theory the role played by the losses in the amount of liquid phase present is quantitatively determined. General techniques are examined which minimize the losses; these techniques are based on saturating the incoming carrier gas with liquid phase vapours and raising the pressure of the carrier gas in the column, e.g. by connecting a capillary to the column outlet in order to offer resistance to the gas flow. The application of these techniques ensures stable performance of the gas chromatographic columns using a volatile liquid phase.     

Cyclodextrin dimer derivatives used as stationary phase for capillary gas chromatography

Summary Four cyclodetrin dimer derivatives were synthesized by linking two single cyclodextrin derivatives with difunctional spacer at the primary side of cyclodetrin. The separation properties of these cylodextrin dimer derivatives as CGC stationary phases were investigated and compared with those of the unbridged native cyclodextrin derivative. The results show that two recognition sites and one link spacer of these cyclodextrin dimer derivatives cooperate in separation and affect the separation of disubstituted benzene positional isomers.     

Separation of alkanes and aromatic compounds by packed column gas chromatography using functionalized Multi-Walled Carbon Nanotubes as stationary phases

In the present work, we show a novel application of pristine and functionalized Multi-Walled Carbon Nanotubes (MWCNTs) as stationary phase in low-cost packed columns for the gas chromatographic separation of alkanes and aromatic hydrocarbons. The MWCNTs were deeply investigated by means of physical and chemical methods, like thermal analysis, IR and atomic force microscopy, and Inverse Gas Chromatography (IGC) in order to correlate the adsorption process and surface properties with the material purity level and functionalization degree. The derivatization process of the pristine nanotubes was a key factor to achieve a successful separation of both the light n-alkanes (C₃–C₅) and the related isomers (C₄–C₅ branched alkanes). Satisfactory results were similarly obtained in the case of separation of aromatic hydrocarbons (BTX).     

Polarizable biphenyl polysiloxane stationary phase for capillary column gas chromatography

A crosslinkable biphenylmethylpolysiloxane stationary phase was synthesized for capillary column gas chromatography and compared with methyl, phenyl, and cyanopropyl polysiloxane stationary phases for the separation of isomeric polycyclic aromatic compounds. While the new phase gave similar separations of nonpolar isomers when compared to the nonpolar phases, separations of polar isomers were greatly improved because of the induced polarity of the biphenyl group of the stationary phase by the solute molecules. This polarizable stationary phase offers a unique selectivity which is not available in other stationary phases.     

Exploitation of a microporous organic polymer as a stationary phase for capillary gas chromatography

Microporous organic polymers (MOPs) have emerged as a new class of functional porous materials with unique characteristics and potential uses in diverse areas. However, the field of MOPs for gas chromatographic (GC) separations has not been well explored. Herein, a MOP namely KAPs-1 was dynamic coated onto a capillary column for the first time. The fabricated column exhibited a nonpolar nature and the column efficiency for n-dodecane was up to 7769 plates m⁻¹. The KAPs-1 coated column showed high GC separation performance for a series of volatile organic compounds (VOCs) including the challenging ethylbenzene and xylene isomers, which could not be resolved at baseline on the commercial 5% phenyl polysiloxane stationary phase. Moreover, the relative standard deviations for five replicate determinations of the studied analytes were 0.0–0.6%, 0.9–3.2%, 1.1–5.9%, 0.8–3.7% for retention time, peak area, peak height and peak width, respectively. To investigate the interaction between some analytes and the stationary phase, thermodynamic and kinetic parameters were also evaluated. The results of this study show it is very promising to utilize MOPs as stationary phases for capillary GC.     

Autocrosslinkable methyl-2-phenylethylpolysiloxane stationary phase for capillary column gas chromatography

Methyl-2-phenylethylpolysiloxane polymers have been synthesized for comparison with methylphenylpolysiloxane stationary phases for gas chromatography. The 50% 2-phenylethyl polysiloxane was found to be autocrosslinkable at 260°C without addition of free redical initiator. Although the selectivity of this phase appears to be similar to the 50% phenyl polysiloxane, its thermal stability is not as high.     

Synergistic effect of resorcarene and cyclodextrin mixed stationary phase in gas chromatography

Summary A new resorcarene derivatives, ethylhexylresorcarene, was synthesized and used as stationary phase in opentubular (capillary) columns. It was combined with heptakis(2,6-di-O-pentyl-3-O-trifluoroacetyl)-β-CD and coated on fused-silica capillary tubes. By studying the chromatographic properties of the mixed stationary phase and its selectivity for different isomers, as well as comparing with the resorcarene and the CD used as individual stationary phases, a synergistic effect was observed on the mixed stationary phase.     

Polyacrylate liquid crystalline stationary phases in supercritical fluid chromatography with carbon dioxide mobile phase

Summary New polyacrylate liquid crystalline compounds were coated onto glass or fused-silica capillary columns as stationary phases and applied to supercritical fluid chromatography. These stationary phases, were very stable: no bleeding was observed at 200°C and up to 200kg/cm² pressures of carbon dioxide mobile phase. The wide working range of the capillary column was extended below the g-n transition temperature. Isomeric compounds such as - and -methoxynaphthalene, anthracene and phenanthrene and several phenolic compounds were separated.     

Synthesis of carbon nanotube/layered double hydroxide nanocomposite as a novel fiber coating for the headspace solid‐phase microextraction of phenols from water samples

In this research, a carbon nanotube/layered double hydroxide nanocomposite was synthesized by an in situ growth route by electrostatic force. The prepared carbon nanotube/layered double hydroxide nanocomposite was successfully prepared and deposited on a stainless‐steel wire for the fabrication of the solid‐phase microextraction fiber. The fiber was evaluated for the extraction of phenolic compounds from water samples. Analytical merits of the method, under optimum conditions (extraction temperature: 75°C, extraction time: 30 min, desorption time: 2 min, desorption temperature 260°C, salt concentration: 10% w/v) are 0.01–300 ng/mL for the linear dynamic range and 0.005–0.08 for the limit of detection. In optimum conditions, the repeatability for one fiber (n = 3), expressed as relative standard deviation, was between 6.5 and 9.9% for the phenolic compounds.     

Prediction of retention data from stationary phase constants in gas chromatography

Summary Specific retention volumes and retention indices for selected compounds can be predicted from different sets of stationary phase constants by multiple regression. Errors in the corresponding calculated retention times are between 5 and 15%. Intercept (A) and slope (B) values are given for 72 McReynolds stationary phases. The A value can be predicted from the retention index of benzene with a standard deviation of 9%.     

Ionic liquid‐bonded polysiloxane as stationary phase for capillary gas chromatography

Ionic liquid (IL) stationary phase is especially suitable for separation of complex samples, owing to the “dual nature” of IL. In this study, a synthetic method of ionic liquid‐bonded polysiloxane (PSOIL) as stationary phase of GC was proposed. Then, the PSOIL was used to prepare an 8 m capillary column by static method. The column efficiency was measured to be about 4000 plates/m (k=3.55, naphthalene) after the column had been conditioned at 210°C. The durability of PSOIL column was better than that of the mixed stationary phase of IL and OV‐1. Moreover, the Abraham solvation parameter model was employed to characterize the PSOIL. The result revealed that the PSOIL had stronger dispersion force (l) than neat IL and stronger hydrogen bond basicity (a) than DB‐1. That meant the PSOIL might offer good selectivity for both polar and non‐polar analytes. The column exhibited unique selectivity for various organic substances, such as the homologous compounds of alkanes, esters, alcohols and aromatic compounds. It was also found that some aromatic positional isomers could be separated better on the PSOIL column than on the DB‐1 column. Furthermore, the stationary phase was suitable for separation of high‐boiling point compounds such as polycyclic aromatic hydrocarbons, phthalic esters, etc. All of these demonstrated that the PSOIL offered good selectivity and high separation efficiency for a wide range of analytes.