Pressurized fluid extraction of carotenoids from Haematococcus pluvialis and Dunaliella salina and kavalactones from Piper methysticum

Pressurized fluid extraction (PFE) was examined as an alternative technology for the extraction of carotenoids in the green algae Haematococcus pluvialis and Dunaliella salina and kavalactones in Piper methysticum. The extraction process was optimized by varying the key extraction factors of solvent, sample-solvent ratio, temperature, and time. The selectivity and efficiency of extraction parameters were determined with high performance liquid chromatography (LC) and LC-mass spectrometry (LC-MS). Results showed that PFE utilization of conventional solvents under controlled temperature and pressure in an oxygen and light-free environment could result in the use of less solvent in a shorter period of time. PFE showed higher or equal extraction efficiencies as compared with traditional solvent extractions while maintaining the integrity of chemical components. PFE showed high potential for extraction of natural products and nutraceuticals, particularly labile and light sensitive chemicals.     

Pressurized liquid extraction versus other extraction techniques in micropreparative isolation of pharmacologically active isoflavones from Trifolium L. species

As a new sample preparation technique, pressurized liquid extraction (PLE), in combination with reversed-phase liquid chromatography (RP-LC) and photodiode-array (PDA) detection were used for the isolation and determination of phytoestrogenic isoflavones in hydrolyzed extracts obtained from aerial parts of five Trifolium L. (clover) species. To optimize the effectiveness of PLE procedure, variable extraction parameters: methanol and acetone (or their 75% aqueous solutions), as extraction solvents, temperatures (75, 100 and 125 °C) and the changeable number of static extraction cycles were tested. Additionally, two other micropreparative techniques: ultrasound-assisted extraction (UAE), and conventional solvent extraction (CSE), under optimized conditions, were also used and compared. Optimum extraction efficiency, expressed in the highest yield of biochanin A, formononetin, daidzein and genistein from plant material, with PLE, using methanol-water (75:25, v/v) as an extraction solvent, an oven temperature of 125 °C and three 5-min static extraction cycles, was obtained.     

Supercritical fluid extraction of Beauvericin from maize

Beauvericin (BEA), a supercritical fluid extraction with supercritical carbon dioxide from maize was investigated. Extraction efficiencies under several different extraction conditions were examined. Pressure, temperature, extraction time, organic modifier and water matrix content (10%) were investigated. The best extraction conditions were at a temperature of 60 °C, 3200 psi, for 30 min static extraction time and methanol as modifier solvent. Extraction recovery of 36% without modifier by adding water to the matrix in the extraction vessel (reproducibility relative standard deviations (R.S.D.)=3-5%) were recorded. Extraction recovery of 76.9% with methanol as co-solvent (reproducibility R.S.D.=3-5%) was obtained. Data shows that SFE gives a lower BEA recovery compared to conventional extraction protocol with organic solvents while SFE with modifier and conventional extraction yields are comparable. BEA extract contents were determined by high pressure liquid chromatography (HPLC) with a diode array detector (DAD) at 205 nm and BEA peak confirmed by LC-MS. Acetonitrile-water as mobile phase and column C-18 were both tested. Instrumental and analytical parameters were optimized in the range linear interval from 1 to 500 mg kg⁻¹ and reached a detection limit of 2 ng.     

Forward-and-back dynamic ultrasound-assisted extraction of fat from bakery products

A dynamic ultrasound-assisted extraction method prior to the gravimetric determination of total fat content in bakery products is proposed. An open approach in which forward-and-back extractant steps and cycles of extract draining and filling of the sample chamber with fresh extractant was used, which provided the best results as compared with both an open system with forward-and-back of a single extractant volume and an one-direction open system. Recoveries from 99.7 to 100.7% compared with Sohxlet extraction were obtained. The repeatability and within laboratory reproducibility, expressed as relative standard deviation (R.S.D.), were 2.04 and 2.74%, respectively. As compared with conventional Soxhlet, the extraction time was shortened more than five times—from 16 to 3 h—in the case of cookies and more of eight times—from 8 to 1 h—in the case of snacks. Thirteen or 25 ml of hexane was required for total extraction in 10 or 20 cycles, depending on the sample.     

Supercritical fluid extraction of Kava lactones from Kava root and their separation via supercritical fluid chromatography

Summary Seven Kava lactones were extracted from Kava root using both pure and 15% ethanol modified CO₂. Most of the Kava lactones were extracted employing 100% CO₂ with an efficiency greater than 90% relative to conventional solvent extraction using organic solvents. Extraction efficiency did not increase significantly when using 15% ethanol-modified CO₂ as an extraction fluid. Separation of extracted Kava lactones was obtained using various packed columns and methanol-modified CO₂. An optimized separation was achieved using either an amino or protein C₄ column at 125 atm and 80°C. Semi-preparative separation of Kava lactones was also obtained using two columns connected in series.     

Synthesis and structural characterization of a zinc(II) complex of the mycobactericidal drug isoniazid - Toxicity against Artemia salina

A new zinc(II) complex of the mycobactericidal drug isoniazid (complex 1) was synthesized and characterized by XRD, vibrational spectroscopy (IR, Raman) and thermogravimetric analysis. The complex is constituted by two isoniazid (INH) molecules, six hydration water molecules and two perchlorate counter-ions for each metal center (C₁₂H₂₆N₆Cl₂O₁₆Zn). Zinc(II) adopts a distorted octahedral geometry, where two INH molecules coordinate in a bidentate manner through the hydrazide group (N, O) and the other two isoniazid residues complete the coordination sphere of zinc(II) through their aromatic nitrogen atoms. This coordination pattern gives rise to a 2-D coordination polymer. Complex 1 belongs to the monoclinic system [a = 8.1190(2) Å, b = 17.977(4) Å, c = 9.1051(2) Å and β = 100.87(3)°], space group P2₁. A biological assay with Artemia salina was also performed. Complex 1 is almost 8.5 times more active than the free ligand. Its toxicity against A. salina correlates well with the cytotoxic activity for some human solid tumors. Therefore, antitumoral properties could be expected from complex 1.     

Quantitative analysis of polymer additives in low density polyethylene using supercritical fluid extraction/supercritical fluid chromatography

Analysis of low concentration polymer additives has been a challenging problem. The commonly used methods of analysis involve the initial extraction of polymer additives with solvents, often in a Soxhlet apparatus, followed by liquid, size exclusion, or gas chromatography. This paper describes the on-line super-critical fluid extraction (SFE)-supercritical fluid chromatographic (SFC) determination of different additives from low density polyethylene. Cryogenic collection was used as an interface between SFE and SFC to focus the extraction eluate before transfer to an analytical SFC column for quantitative analysis.     

Improved supercritical fluid extraction of sulphonamides

Summary Different ways used for enhancing the yield of sulphonamides leached from solid supports are reported. Supercritical CO₂ and methanol-modified CO₂ were used as extractants of the target analytes and the impregnation of the solid sample with buffer, derivatization of the analytes and ion-pair formation were assessed. Only the sulphonamide/tetramethyl-ammonium ion-pairs are quantitatively extracted from the solid supports using pure supercritical CO₂, while the other modifications and the presence of a cosolvent lead to recoveries lower than 30% for most of the analytes. Individual separation/quantitation of the analytes was performed off-line using a liquid chromatograph.     

Comparison of supercritical fluid extraction and liquid-liquid extraction for isolation of selected pesticides stored in freeze-dried water samples

Summary The stability of freeze-dried water samples spiked with eight agrochemicals (atrazine, simazine, linuron, carbaryl, propanil, fenitrothion, parathion and fenamiphos) were examined to evaluate their suitability as candidate reference materials for their determination in water samples. In addition, two different extraction procedures, liquid-liquid and supercritical fluid extraction, were compared for the isolation and trace enrichment of target analytes from freeze-dried water samples. Final analytical determinations were by gas chromatography-nitrogen phosphorus detection and electronic impact mass spectrometry, and by liquid chromatography-diode array detection. The whole methodology developed in this paper permitted the determination of pesticides spiked in water at levels varying from 0.03 to 6.9 g L^–1.     

Optimization of extraction of evodiamine and rutaecarpine from fruit of Evodia rutaecarpa using modified supercritical CO(2)

Evodiamine and rutaecarpine have been intensively studied due to their pharmacological actions and clinical applications. In this report, supercritical fluid was used to extract evodiamine and rutaecarpine from the unripe fruit of Evodia rutaecarpa. Response surface methodology using Box-Behnken experimental design was utilized to optimize parameters for supercritical carbon dioxide extraction with methanol as co-solvent. The effect of various values of dynamic extraction time (30-90min), temperature (50-70°C) and pressure (200-400bar) on extraction yields of the two compounds was evaluated. Determinations of the extracts were performed by high-performance liquid chromatography. The experimental data obtained were fitted to second-order polynomial equations and analyzed by analysis of variance. The highest yields predicted were 1.217mg/g for evodiamine and 0.969mg/g for rutaecarpine at the optimal values (time 78min, temperature 62°C, pressure 280bar and co-solvent flow rate 0.4mL/min), based on the selected range of experimental conditions.     

Comparison by capillary SFC and SFC-MS of soxhlet and supercritical fluid extraction of hamster feces

Components of hamster feces ranging from low molecular weight fatty acids through the expected range of triglycerides have been eluted in a single SFC run with simultaneous pressure and temperature programming. Temperature programming from 140°C to 240°C was required to provide optimum conditions for separation of the fatty acids and to move the elution region of the sterol esters away from that of the triglycerides. Data from chemical ionization and electron impact mass spectrometry of compounds separated by SFC were used to confirm identities suggested by retention measurements and to provide tentative identities of unknown compounds. SFC with flame ionization detection was used to compare Soxhlet extraction, off-line supercritical fluid extraction (SFE), and on-line SFE of the feces. Although samples obtained by Soxhlet extraction and SFE produced very similar chromatograms, SFE required far less time and consumed much smaller quantities of organic solvent.     

Steam distillation and supercritical fluid extraction of some Mexican spices

Summary By means of steam distillation and supercritical fluid extractions, we are in a process of evaluating the essential oil and the oleoresin quality and yield obtain respectively by the above methods outlined.Our area of interest is the isolation, separation and purification of compounds whose applications are well supported by the food technology demands.We pretend to characterize the aromatic components of edible or other commercial oils from the widespread spices and plant natural collections, throughout the country of Mexico.The facilities for the obtention of reference standards characteristic of our flora specimens, is under research.Poster presented at the First Symposium of Supercritical Fluids, Nice, France, 14–17 October, 1988     

Application of supercritical fluid extraction and supercritical fluid chromatography to the production of taxanes as anti-cancer drugs

The supercritical fluid extraction (SFE) of taxicin from the dried needles of the English yew tree, Taxus baccata is described. Analysis by supercritical fluid chromatography (SFC) and proton NMR spectroscopy was used to confirm identity and purity. The extraction efficiency of SFE is comparable with that obtained using liquid solvents. Such taxanes may be used semi-synthetically to prepare potential anti-cancer drugs.     

Characterization of Semtex by supercritical fluid extraction and off-line GC-ECD and GC-MS

Researchers using electron capture for the detection of explosive vapors currently claim the ability to detect the presence of RDX in Semtex – a plastic explosive comprising hexahydro-1,3,5-trinitro-1,3,5-triazane (RDX) in a matrix of styrene-butadiene copolymer and hydrocarbon oil. The vapor pressure of RDX at room temperature is 0.006 ppb, and therefore well below the detection limit of electron capture detection (ECD). The positive response generated by ECD is, consequently, not from the presence of RDX, but from some other component. This paper describes the extraction and identification of several compounds in Semtex, along with the determination of which is responsible for the positive response of an ECD-based detector. From the results of supercritical fluid extraction and off-line gas chromatography combined with electron capture and mass spectrometric detection, it has been concluded that ethylene glycol dinitrate is the component responsible for the positive ECD response. This conclusion is based on the requirements necessary for ECD detection, i.e. electronegativity, and a sufficient vapor pressure. The other compounds present were eliminated as possible choices because they either can not be detected by an ECD or do not have sufficient vapor pressure under ambient conditions.     

Direct determination of tagitinin C in Tithonia diversifolia leaves by on-line coupling of supercritical carbon dioxide extraction to FT-IR spectroscopy by means of optical fibres

Supercritical fluid extraction (SFE) with carbon dioxide as extraction medium was on-line coupled to a FT-IR spectrometer equipped with a Mercury Cadmium Telluride (MCT) detector using a tailor-made high-pressure fibre optic flow cell. This method was optimised and developed for the monitoring in real time and the quantification of dynamic extractions of tagitinin C from Tithonia diversifolia leaves.In order to demonstrate the method ability to allow the direct quantification of tagitinin C in the extract medium the standard addition method was used. The area integration of curves obtained by plotting the absorbance of the highly specific CO stretching vibration at 1668 cm⁻¹ versus time (i.e. extractograms) was used as instrumental response.The SFE/FT-IR process was successfully validated using the accuracy profile as decision tool. On this basis, a linear regression model was chosen for the calibration curve. The relative standard deviation for repeatability and intermediate precision were between 0.8 and 3.1 %, respectively. Moreover, the method was found to be accurate as the two-sided 95% beta-expectation tolerance interval did not exceed the acceptance limits of 85 and 115% on the analytical range investigated (500-2500 μg of added amount of tagitinin C).The proposed method allowed the non-destructive extraction of tagitinin C and its on-line quantitative determination in less than 25 min thus facilitating the subsequent experiments or the pharmacological studies performed on this compound.     

Optimization of supercritical fluid extraction of saikosaponins from Bupleurum falcatum with orthogonal array design

Supercritical fluid extraction (SFE) was used to extract saikosaponins a, c and d from the root of Bupleurum falcatum. An orthogonal array design L₉(3)⁴ was employed as a chemometric method for the optimization of the SFE conditions. The effects of four factors including pressure (30–40 MPa), temperature (40–50°C), ethanol concentration (60–100%) and time (2.5–3.5 h) on the yields of saikosaponins were investigated by a preparative SFE system in the SFE mode. Under the optimized conditions, namely 35 MPa of pressure, 45°C of temperature, 80% of ethanol concentration and 3.0 h of time, the yields of saikosaponin c, saikosaponin a, saikosaponin d, total saikosaponins and SFE extract were 0.16, 0.12, 0.96, 1.24 and 16.48 mg/g, respectively. Determinations of the saikosaponins were performed by HPLC.