An optical sensor for mercury ion based on the fluorescence quenching of tetra(p-dimethylaminophenyl)porphyrin

An optical sensor for mercury ion (Hg²⁺), based on quenching the fluorescence of the sensing reagent porphyrin immobilized in plasticized poly(vinyl chloride) (PVC) membrane, has been developed. The responses to mercury ion were compared for the sensors modified with three porphyrin compounds including 5,10,15,20-tetraphenylporphyrin (TPP), tetra(p-dimethylaminophenyl)porphyrin (TDMAPP) and tetra(N-phenylpyrazole) porphyrin (TPPP). Among them, TDMAPP showed the most remarkable response to Hg²⁺. The drastic decrease of the TDMAPP fluorescence intensity was attributed to the formation of a complex between TDMAPP and Hg²⁺, which has been utilized as the fabrication basis of a Hg²⁺-sensitive fluorescence sensor. The analytical performance characteristics of the TDMAPP modified sensor was investigated. The response mechanism, especially involving the response difference of three porphyrin compounds, was discussed in detail. The sensor can be applied to the quantification of Hg²⁺ with a linear range covering from 4.0 × 10⁻⁸ mol L⁻¹ to 4.0 × 10⁻⁶ mol L⁻¹. The limit of detection was 8.0 × 10⁻⁹ mol L⁻¹. The sensor exhibited excellent reproducibility, reversibility and selectivity. Also, the TDMAPP-based sensor was successfully used for the determination of Hg²⁺ in environmental water samples.     

Development of an optical chemical sensor based on 2-(5-bromo-2-pyridylazo)-5-(diethylamino)phenol in Nafion for determination of nickel ion

An optical chemical sensor based on immobilization of 2-(5-bromo-2-pyridylazo)-5-(diethylamino)phenol (Br-PADAP) in Nafion membrane is described. The membranes were cast onto glass substrates and were used for the determination of nickel in aqueous solutions by spectrophotometry. The sensor system is highly transparent, mechanically stable and showed no evidence of reagent leaching. The influence of several parameters such as pH, ligand concentration, and type and concentration of regenerating solution were optimized. The sensor system showed good sensitivity in the range 0.5-20 μg ml⁻¹ with a detection limit of 0.3 μg ml⁻¹ Ni(II). The sensor has been incorporated into a home-made flow-through cell for determination of nickel in flowing streams with improved sensitivity, precision and detection limit. The calibration curve in the flow system was linear in the range 0.1-16 μg ml⁻¹ with a detection limit of 0.07 μg ml⁻¹. The sensor is easily regenerated by dilute nitric acid solution. The proposed method was successfully applied to the determination of nickel content in vegetable oil and chocolate samples and the results were compared with those obtained using atomic absorption spectrometry.     

Photocured thiol-ene based optical fluorescence sensor for determination of gold(III)

This study describes the preparation and the characterization of a new thiol-ene based polymeric fluorescence sensor by photo initiated polymerization of trimethylolpropane tris(3-mercaptopropionate), 2-hydroxyethylacrylate, and 2,4,6-triallyloxy-1,3,5-triazine which are used as monomers and also a photo initiator (2,2-dimethoxy-2-phenylacetophenone) for its usage as optical sensor for gold ions. The thiol-ene based polymeric membrane sensor was characterized by using attenuated total reflectance-fourier transform infrared spectroscopy (ATR-FTIR) and scanning electron microscopy (SEM). The response characteristics of the sensors including dynamic range, pH effect, response time, and the effect of foreign ions were investigated. Fluorescence spectra showed that the excitation/emission maxima of the membrane were at 379/425 nm, respectively     

Development of an optical fibre reflectance sensor for p-aminophenol detection based on immobilised bis-8-hydroxyquinoline

2,2′-(1,4-Phenylenedivinylene)bis-8-hydroxyquinoline (PBHQ), a highly sensitive reagent used for the colorimetric determination of p-aminophenol (PAP), was successfully immobilised on XAD-7 and coupled with optical fibres to investigate a sensor-based approach for determining p-aminophenol. The solid-state sensor is based on the reaction of PAP with PBHQ in presence of an oxidant to produce an indophenol dye. The reflectance measurements were carried out at a wavelength of 647 nm since it yielded the largest divergence different in reflectance spectra before and after reaction with the analyte. The linear dynamic range of PAP was found within the concentration range of 0.1-2.18 mg l⁻¹ with its LOD of 0.02 mg l⁻¹. The sensor response from different probes (n = 7) gave a R.S.D. of 4.4% at 1.09 mg l⁻¹ PAP concentration. The response time of the optical one-shot sensor was 5 min for a stable solution. As this PAP sensor is irreversible, a fresh sensor has to be used for each measurement. All the experimental parameters were optimized for the determination of PAP. Using the optical sensing probe, PAP in pharmaceutical wastewater and paracetamol was determined. The effect of potential interferences such as inorganic and organic compounds was also evaluated. Potential on-site determination of PAP with such sensors can indirectly aid detection of organo-phosphorus nerve agents and pesticides in the field by inhibition of acetylcholine esterase-catalyzed hydrolysis of p-aminophenyl acetate to p-aminophenol.     

A fluorescent ammonia sensor based on a porphyrin cobalt(II)-dansyl complex

Detecting and measuring the concentration of ammonia is of interest in many scientific and technological areas. A porphyrin based cobalt(II) complex with a dansyl fluorophore has been synthesized and investigated as a ‘turn-on’ fluorescent ammonia sensor. Over sixfold increase in fluorescence emission occurs upon the treatment of NH₃ to [Co(TPP)(Ds-pip)] sensor solution, resulting from NH₃-induced displacement of the axially coordinated fluorophore.     

Novel flexible chemical gas sensor based on poly(3,4-ethylenedioxythiophene) nanotube membrane

Poly(3,4-ethylenedioxythiophene) nanotubes (PEDOT NTs) flexible membrane was successfully fabricated by vapor deposition polymerization (VDP) mediated electrospinning for ammonia gas detection. PVA nanofibers (NFs) were electrospun as a core part and polyvinyl alcohol (PVA)/PEDOT coaxial nanocables (NCs) were prepared by VDP method via EDOT monomer adsorption onto the electrospun PVA NFs as templates. To obtain the PEDOT NTs membrane, the PVA NFs were removed from PVA/PEDOT coaxial NCs with distilled water. PVA/PEDOT coaxial NCs and PEDOT NTs had the conductivities of 71 and 61 S cm⁻¹ and were applied as a transducer for ammonia gas detection in the range of 1-100 parts per million (ppm) of NH₃ gas. They exhibited the minimum detectable level of ca. 5 parts per million (ppm) and fast response time (less than 1 s) towards ammonia gas. In a recovery time, the PEDOT NTs membrane sensor was ca. 30 s and shorter compared to that of the membrane sensor based on the PVA/PEDOT NCs (ca. 50 s). In addition, sensor performance of PEDOT NTs membrane was also undertaken as a function of membrane thickness. Thick membrane sensor (30 μm) had the enhanced sensitivity and the sensitivity on the membrane thickness was in the order of 30 μm > 20 μm > 10 μm at 60 ppm of NH₃ gas.     

Dual optical sensor for oxygen and temperature based on the combination of time domain and frequency domain techniques

In measuring specific conditions in the real world, there are many situations where both the oxygen concentration and the temperature have to be determined simultaneously. Here we describe a dual optical sensor for oxygen and temperature that can be adapted for different applications. The measurement principle of this sensor is based on the luminescence decay times of the oxygen-sensitive ruthenium complex tris-4,7-diphenyl-1,10-phenanthroline ruthenium(III) [Rudpp] and the temperature-sensitive europium complex tris(dibenzoylmethane) mono(5-amino-1,10-phenanthroline)europium(III) [Eudatp]. The excitation and emission spectra of the two luminophores overlap significantly and cannot be discriminated in the conventional way using band pass filters or other optical components. However, by applying both the frequency and time domain techniques, we can separate the signals from the individual decay time of the complexes. The europium complex is entrapped in a poly(methyl methacrylate) (PMMA) layer and the ruthenium complex is physically adsorbed on silica gel and incorporated in a silicone layer. The two layers are attached to each other by a double sided silicone based tape. The europium sensing film was found to be temperature-sensitive between 10 and 70 °C and the ruthenium oxygen-sensitive layer can reliably measure between 0 and 21% oxygen.     

A selective optical sensor for picric acid assay based on photopolymerization of 3-(N-methacryloyl) amino-9-ethylcarbazole

A novel optical sensor based on covalent immobilization for picric acid assay has been described. To improve the stability of the sensor, a terminal double bond was attached to the fluorescent compound, 3-amino-9-ethylcarbazole (AEC), via methacryloyl chloride. The resultant compound, 3-(N-methacryloyl) amino-9-ethylcarbazole (MAEC) was copolymerized with 2-hydroxypropyl methacrylate on surface-modified quartz glass plates by UV irradiation. The resulting optical sensor (optode membrane) was used to determine picric acid based on fluorescence quenching. It shows a linear response toward picric acid in the concentration range of 9.33 × 10⁻⁸ to 9.33 × 10⁻⁵ mol l⁻¹, with rapid response, high stability and good selectivity to picric acid.     

Highly sensitive and ultrafast response surface acoustic wave humidity sensor based on electrospun polyaniline/poly(vinyl butyral) nanofibers

Polyaniline (PANi) composite nanofibers were deposited on surface acoustic wave (SAW) resonator with a central frequency of 433 MHz to construct humidity sensors. Electrospun nanofibers of poly(methyl methacrylate), poly(vinyl pyrrolidone), poly(ethylene oxide), poly(vinylidene fluoride), poly(vinyl butyral) (PVB) were characterized by scanning electron microscopy, and humidity response of corresponding SAW humidity sensors were investigated. The results indicated that PVB was suitable as a matrix to form nanofibers with PANi by electrospinning (ES). Electrospun PANi/PVB nanofibers exhibited a core–sheath structure as revealed by transmittance electron microscopy. Effects of ES collection time on humidity response of SAW sensor based on PANi/PVB nanofibers were examined at room temperature. The composite nanofiber sensor exhibited very high sensitivity of ∼75 kHz/%RH from 20 to 90%RH, ultrafast response (1 s and 2 s for humidification and desiccation, respectively) and good sensing linearity. Furthermore, the sensor could detect humidity as low as 0.5%RH, suggesting its potentials for low humidity detection. Attempts were done to explain the attractive humidity sensing performance of the sensor by considering conductivity, hydrophilicity, viscoelasticity and morphology of the polymer composite nanofibers.     

A method for the detection of alcohol vapours based on optical sensing of magnesium 5,10,15,20-tetraphenyl porphyrin thin film by an optical spectrometer and principal component analysis

In this work we have proposed a method for the detection of alcohol vapours, i.e. methanol, ethanol and isopropanol, based on the optical sensing response of magnesium 5,10,15,20-tetraphenyl porphyrin (MgTPP) thin films, as measured by optical spectrometry with the assistance of chemometric analysis. We have implemented a scheme which allows a laboratory UV–vis spectrometer to act as a so-called “electronic nose” with very little modification. MgTPP thin films were prepared by a spin coating technique, using chloroform as the solvent, and then subjected to thermal annealing at 280 °C in an argon atmosphere. These MgTPP optical gas sensors presented significant responses with methanol compared to ethanol and isopropanol, based on the dynamic flow of alcohol vapours at the same mol% of alcohol concentration. Density functional theory (DFT) calculations were performed to model the underlying mechanism of this selectivity. The performance of the optical gas sensors was optimised by varying the fabrication parameters. It is hoped that the MgTPP thin film together with an off-the-shelf optical spectrometer and a simple chemometrics algorithm can be a valuable tool for the analysis of alcoholic content in the beverage industry.     

A selective optical chemical sensor for 2,6-dinitrophenol based on fluorescence quenching of a novel functional polymer

A bifurcated optical fiber based chemical sensor for continuous monitoring of 2,6-dinitrophenol (2,6-DNP) has been proposed based on the reversible chemical reaction between a novel functional poly(vinyl chloride) (PVC) as the sensing material and the analytes. The functional PVC (FPVC), containing a fluorescent curcumin moiety, was synthesized by the nucleophilic substitution of a fraction of the chlorine atoms bound to the PVC backbone by curcumin. When plasticized in a membrane of 5 μm thickness, FPVC extracts 2,6-DNP from aqueous solution into the bulk membrane phase and reacts with the analyte to form a complex with low fluorescence efficiency through hydrogen bonding. Formation of the complex gave a significant fluorescence quenching which is suitable for signalling the occurrence of the host-guest interaction. At pH 3.50, the sensor exhibits a dynamic detection range from 2.5 × 10⁻⁶ to 7.0 × 10⁻³ mol L⁻¹ with a limit of detection of 1.0 × 10⁻⁶ mol L⁻¹. As 2,6-DNP can provide an optimal space geometry matches to the formation of hydrogen bonds, the sensor shows excellent selectivity for 2,6-DNP over other nitrophenols. The forward and reverse response time (t₉₅) of the sensor both was within 1 min. The repeatability, reproducibility, and lifetime of the sensor were also satisfied. The sensor was applied to determine 2,6-DNP in water samples successfully.     

Development of an optical fibre Al(III) sensor based on immobilised chrome azurol S

Chrome azurol S immobilised on XAD-2 has been used in this study as a reagent phase for the development of an optical fibre Al(III) sensor. Using a kinetic approach, this sensor was able to give a linear response in the Al(III) concentration range of 1.3 x 10(-5)-2.0 x 10(-4) M with a limit of detection of 1.0 x 10(-4) M. The optimum responses were obtained at pH 6.0 and when the solution was stirred. The sensor response was found to have a repeatability and reproducibility of 1.6% and 5.8%, respectively. The results obtained for Al(III) determination in aqueous sample were in good agreement with those obtained using graphite furnace-atomic absorption spectrometry.     

A multi-channel sensor based on 8-hydroxyquinoline ferrocenoate for probing Hg(II) ion

A new sensing molecule 8-hydroxyquinoline ferrocenoate (Fc-Q) which combines ferrocene and 8-hydroxyquinoline moieties was synthesized and applied as a multi-channel sensor for the detection of Hg²⁺ ion. Fc-Q can coordinate with Hg²⁺ to give colorimetric, fluorescent and electrochemical responses. Upon complexation with Hg²⁺ ion, the characteristic absorption peak is red-shifted (Δλ = 45 nm), the fluorescent intensity is quenched at 303 nm, and the oxidation peak is cathodic shifted (ΔE_1/2 = −149 mV). Quantitatively analyzed Hg²⁺ ions at the range of ppb level could be achieved by electrochemical response. For the practical application of sensing Hg²⁺ in real world water, Fc-Q modified screen-printed carbon electrodes were obtained for facile, sensitive, and on-site analysis of Hg²⁺.     

墨鱼骨有机质与纳米金复合膜光学传感器的构建及其应用

利用纳米金种法制备墨鱼骨有机质纳米金复合膜(CDMS/AuNPs),构建一种有机质复合纳米材料的光学传感器。采用扫描电镜(SEM)和紫外-可见吸收光谱对复合膜的结构和光学性质进行表征。根据金纳米颗粒(AuNPs)的局域表面等离子体共振(LSPR)效应,利用亚硝酸盐还原氯金酸诱导纳米金种生长,进而应用于亚硝酸盐的检测。在优化实验条件下,CDMS/AuNPs传感器的吸光度与亚硝酸盐的浓度在2.5×10-6～5.0×10-5mol/L范围内呈良好的线性关系(R=0.9950),检出限为8.0×10-7 mol/L(S/N=3)。     

Development of an electronic tongue based on a PEDOT-modified voltammetric sensor

Three different electrodes were tested for use as nonspecific amperometric sensors for blind analysis on real matrices, namely different fruit juices from different fruits or different brands. The first two electrodes were traditional Pt and Au electrodes, while the third one was modified with poly(3,4-ethylenedioxythiophene) conducting polymer. The sensors were tested separately, tested coupled to each other, and also tested together. The responses of the electrode system(s) were first screened via PCA and then their discriminant capabilities were quantified in terms of the sensitivities and specificities of their corresponding PLS-DA multivariate classification models. Particular attention was paid to analyzing the evolution of the response over subsequent potential sweeps. The modified electrode demonstrated the most discriminating ability, and it was the only system capable of satisfactorily performing the most complex task attempted during the analysis: discriminating between juices from the same fruit but from different brands. Moreover, the electrode "cleaning" procedure required between two subsequent potential sweeps was much simpler for the modified electrode than for the others. This electrode system was therefore shown to be a good candidate for use as an informative element in an electronic tongue applied to the analysis of other food matrices.     

Optical oxygen sensor based on fluorescence change of pyrene-1-butyric acid chemisorption film on an anodic oxidation aluminium plate

An optical oxygen-sensing material based on the fluorescence intensity changes of pyrene-1-butyric acid (PBA) chemisorption film has been developed and characterised. The fluorescence intensity of PBA film decreased with increase of oxygen concentration. The I₀/I₁₀₀ value of PBA film is estimated to be 6.14±0.15 and large Stern-Volmer constant (K_SV=0.028±0.13 Torr⁻¹) is obtained. After irradiation for 24 h with 150 W tungsten lamp, little changes of oxygen-sensing properties were observed. These results indicate that PBA film is highly oxygen-sensitive and photostability device. The response times of the PBA chemisorption film were 10.0 s for switching from argon to oxygen, and 53.0 s for switching from oxygen to argon. Moreover, the optical sensor based on the PBA chemisorption film was applied to the measurement of oxygen concentration in aqueous solution.     

Stability of new optical pH sensing material based on cross-linked poly(vinyl alcohol) copolymer

Cross-linked poly(vinyl alcohol) (PVA)-silica gel copolymer has been employed as a optical pH sensor substrate for immobilisation of fluorescein. Cross-linking was carried out by the sol-gel process incorporating PVA in initial sol-gel solution of tetra-methoxysilane (TMOS) under acidic conditions. Three dimensional network formation could be achieved using compositions of PVA/TMOS=80-90/20-10 vol.% to result in crack-free films. The fluorescent sensor layers were prepared by dip-coating of gel solution onto glass slides. The dynamic fluorescence response towards different pH values was investigated in terms of the influence of sample ionic strength, membrane composition as well as age of sol-gel layers. Depending on the composition of the matrix pK_a values of 6.50, 6.68 and 7.06 were found 18 days after continues storage in buffer.     

Greener analytical method for the determination of copper(II) in wastewater by micro flow system with optical sensor

Greener analytical method using micro flow system for the determination of Cu(II) in wastewater samples was designed and investigated. The micro flow system consisted of a planar glass chip with poly(dimethylsiloxane) (PDMS) top plate and fixed with fiber optic probe as optical sensor for monitoring of Cu(II) that reacted with 2-carboxy-2′-hydroxy-5′-sulfoformazyl benzene (zincon) on the chip at 605 nm. This design gave a satisfied sensitivity with a linear calibration graph over the range of 0.1-3.0 μg mL⁻¹ of Cu(II) and correlation coefficient 0.9991. The percentage relative standard deviation was 2.5 for 10-replicate measurements and the limit of detection (LOD) was 0.1 μg mL⁻¹. This system has been successfully applied to the determination of Cu(II) in wastewaters from electroplating industry with less reagents and samples consumption and diminutive waste generation.     

The double K+/Ca2+ sensor based on laser scanned silicon transducer (LSST) for multi-component analysis

In the present work a double ion sensor based on a laser scanned semiconductor transducer (LSST) for the simultaneous determination of K⁺- and Ca²⁺-ions in solutions has been developed. Specially elaborated ion-sensitive membrane compositions based on valinomycin and calcium ionophore calcium bis[4-(1,1,3,3-tetramethylbutyl)phenyl] phosphate (t-HDOPP-Ca) were deposited as separate layers on a silanized surface of the Si/SiO₂/Si₃N₄-transducer. The proposed multi-sensor exhibits theoretical sensitivities and the detection limits of the sensor were found to be 2×10⁻⁶ mol l⁻¹ for K⁺ and 5×10⁻⁶ mol l⁻¹ for Ca²⁺. The elaborated double sensor is proposed for the first time as a prototype of a new type of multi-sensor systems for chemical analysis.     

The influence of different factors on exploitation properties of nonlinear optical polymeric materials based on an epoxy matrix doped with flavonoids

The paper is devoted to investigations of exploitation properties of nonlinear-optical (NLO) polymer film materials based on an epoxy matrix doped with flavonoids. Adhesion of the polymer films to a glass substrate is investigated. Also, the influence of photoinduced destruction on functional properties of these polymer composites by UV–Vis spectroscopy method is studied. Effect of various microorganisms such as mold fungi of Aspergillus niger (A. niger) and Pinicillum chrysogenum (P. chrysogenum) species on the polymer NLO materials are analyzed by evaluation of the fungistatic effect and fungicidal resistance and using the FTIR spectroscopy. As a result it is established that the NLO polymer film materials based an epoxy matrix doped with flavonoids have a very good adhesion to the glass substrate, and they are stable to the photoinduced destruction. These materials do not have the fungistatic effect but they demonstrate some fungicidal resistance. This phenomenon is explained by the presence of flavonoids, which are natural antiseptics.