H2S sensing properties of nanocrystalline Sr2FeO.6NiO.4MoO6 thick film prepared by sol-gel citrate method

Nanocrystalline Sr₂FeMoO₆ (SFMO) belonging to the group of double perovskite oxides, was prepared by the sol-gel citrate method. The structural and microstructural characterization has been carried out with the help of X-ray diffraction (XRD) and transmission electron microscopy (TEM), respectively. XRD of Sr₂Fe_1−xNi_xMoO₆ (SFNMO) shows the formation of solid solution with average grain size of about 40 nm. A comparative study of gas sensing behaviour of Sr₂FeMoO₆ and Sr₂Fe_1−xNi_xMoO₆ with reducing gases like hydrogen sulfide (H₂S), liquid petroleum gas (LPG), hydrogen (H₂), ethanol (C₂H₅OH) and carbon monoxide (CO) were also discussed. The sensitivity is calculated by measuring the change the resistance of the sensor material in the presence of gas. Among the different composition of x (x = 0.2, 0.3, 0.4, 0.5), Sr₂Fe_0.6Ni_0.4MoO₆ (x = 0.4) shows better response to H₂S gas at 260 °C. Incorporation of palladium (Pd) improves the gas response, selectivity, response time and reduced the operating temperature from 260 to 220 °C for H₂S gas.     

Enzyme mimics of spinel-type CoxNi1−xFe2O4 magnetic nanomaterial for eletroctrocatalytic oxidation of hydrogen peroxide

A series of spinel-type Co_xNi_1−xFe₂O₄ (x = 0, 0.2, 0.4, 0.5, 0.6, 0.8, 1.0) magnetic nanomaterials were solvothermally synthesized as enzyme mimics for the eletroctrocatalytic oxidation of H₂O₂. X-ray diffraction and scanning electron microscope were employed to characterize the composition, structure and morphology of the material. The electrochemical properties of spinel-type Co_xNi_1−xFe₂O₄ with different (Co/Ni) molar ratio toward H₂O₂ oxidation were investigated, and the results demonstrated that Co_0.5Ni_0.5Fe₂O₄ modified carbon paste electrode (Co_0.5Ni_0.5Fe₂O₄/CPE) possessed the best electrocatalytic activity for H₂O₂ oxidation. Under optimum conditions, the calibration curve for H₂O₂ determination on Co_0.5Ni_0.5Fe₂O₄/CPE was linear in a wide range of 1.0 × 10⁻⁸–1.0 × 10⁻³ M with low detection limit of 3.0 × 10⁻⁹ M (S/N = 3). The proposed Co_0.5Ni_0.5Fe₂O₄/CPE was also applied to the determination of H₂O₂ in commercial toothpastes with satisfactory results, indicating that Co_xNi_1−xFe₂O₄ is a promising hydrogen peroxidase mimics for the detection of H₂O₂.     

Synthesis and characterization of Zn1−xNixFe2O4 spinels prepared by a citrate precursor

Nanocrystalline single-phase samples of Zn_1−xNi_xFe₂O₄ ferrites (0<x<1) have been obtained via a soft-chemistry method based on citrate-ethylene glycol precursors, at a relatively low temperature (650 °C). The influence of the nickel and zinc contents as well as that of heat treatments were investigated by means of X-ray powder diffraction, Brunauer-Emmett-Teller (BET) surface area, scanning electron microscopy (SEM) and Fourier Transform Infrared (FTIR) Spectroscopy. Higher Ni content increases the surface areas, the largest one (∼20 m²/g) being obtained for NiFe₂O₄ annealed at 650 °C for 15 h. For all compositions, the surface area decreases for prolonged annealing at 650 °C and for higher annealing temperatures. Those results were correlated to the particle size evolution; the smallest particles (∼50 nm) observed in the NiFe₂O₄ sample (650 °C, 15 h) steadily increase as Ni ions were replaced by Zn, reaching ∼100 nm in the ZnFe₂O₄ sample (650 °C, 15 h). For all the Zn_1−xNi_xFe₂O₄ samples and, whatever the heat treatments was, the FTIR spectra show two fundamental absorption bands in the range 650-400 cm⁻¹, characteristics of metal vibrations, without any superstructure stating for cation ordering. The highest ν₁-tetrahedral stretching, observed at ∼615 cm⁻¹ in NiFe₂O₄, shifts towards lower values with increasing Zn, whereas the ν₂-octahedral vibration, observed at 408 cm⁻¹ in NiFe₂O₄, moves towards higher wavenumbers, reaching 453 cm⁻¹ in ZnFe₂O₄.     

The La0.95Ni0.6Fe0.4O3-CeO2 system: Phase equilibria, crystal structure of components and transport properties

Phase equilibria, crystal structure, and transport properties in the (100−x) La_0.95Ni_0.6Fe_0.4O₃-xCeO₂ (LNFCx) system (x=2-75 mol%) were studied in air. Evolution of phase compositions and crystal structure of components was observed. The LNFCx (2≤x≤10) are three-phase and comprise the perovskite phase with rhombohedral symmetry (R3?c), the modified ceria with fluorite structure (Fm3?m), and NiO as a secondary phase. These multiphase compositions exhibit metallic-like conductivity above 300 °C. Their conductivity gradually decreases from 395.6 to 260.6 S/cm, whereas the activation energy remains the same (E_a=0.04-0.05 eV), implying the decrease in the concentration of charge carriers. Phase compositions in the LNFCx (25≤x≤75) are more complicated. A change from semiconducting to metallic-like conductivity behavior was observed in LNFC25 at about 550 °C. The conductivity of LNFCx (25≤x≤75) could be explained in terms of a modified simple mixture model.     

Sol-gel synthesized semiconducting LaCo0.8Fe0.2O3-based powder for thick film NH3 gas sensor

Perovskite type LaCo_xFe_1−xO₃ nanoparticles was synthesized by a sol-gel citrate method. The structural, electrical and sensing characteristics of the LaCo_xFe_1−xO₃ system were investigated. The structural characteristics were performed by using X-ray diffraction (XRD) and transmission electron microscopy (TEM) to examine the phase and morphology of the resultant powder. The XRD pattern shows nanocrystalline solid solution of LaCo_xFe_1−xO₃ with perovskite phase. Electrical properties of synthesized nanoparticles are studied by DC conductivity measurement. The sensor shows high response towards ammonia gas in spite of other reducing gases when x = 0.8. The effect of 0.3 wt.% Pd-doped LaCo_0.8Fe_0.2O₃ on the response and a recovery time was also addressed.     

Crystal structure, microstructure and reducibility of LaNixCo1−xO3 and LaFexCo1−xO3 Perovskites (0<x≤0.5)

Nickel and iron substituted LaCoO₃ with rhombohedrally distorted perovskite structure were obtained in the temperature range of 600-900 °C by thermal decomposition of freeze-dried citrates and by the Pechini method. The crystal structure, morphology and defective structure of LaCo_1−xNi_xO₃ and LaCo_1−xFe_xO₃ were characterized by X-ray diffraction and neutron powder diffraction, TEM and SEM analyses and electron paramagnetic resonance spectroscopy. The reducibility was tested by temperature programmed reduction with hydrogen. The products of the partial and complete reduction were determined by ex-situ XRD experiments. The replacement of Co by Ni and Fe led to lattice expansion of the perovskite structure. For perovskites annealed at 900 °C, there was a random Ni, Fe and Co distribution. The morphology of the perovskites does not depend on the Ni and Fe content, nor does it depend on the type of the precursor used. LaCo_1−xNi_xO₃ perovskites (x>0.1) annealed at 900 °C are reduced to Co/Ni transition metal and La₂O₃ via the formation of oxygen deficient Brownmillerite-type compositions. For LaCo_1−xNi_xO₃ annealed at 600 °C, Co/Ni metal, in addition to oxygen-deficient perovskites, was formed as an intermediate product at the initial stage of the reduction. The interaction of LaCo_1−xFe_xO₃ with H₂ occurs by reduction of Co³⁺ to Co²⁺ prior to the Fe³⁺ ions. The reducibility of Fe-substituted perovskites is less sensitive towards the synthesis procedure in comparison with that of Ni substituted perovskites.     

A highly coercive carbon nanotube coated with Ni0.5Zn0.5Fe2O4 nanocrystals synthesized by chemical precipitation-hydrothermal process

Novel magnetic composites (Ni_0.5Zn_0.5Fe₂O₄-MWCNTs) of multi-walled carbon nanotubes (MWCNTs) coated with Ni_0.5Zn_0.5Fe₂O₄ nanocrystals were synthesized by chemical precipitation-hydrothermal process. The composites were characterized by X-ray powder diffractometer (XRD), X-ray photoelectron spectrometer (XPS), Fourier transform infrared spectroscopy (FTIR), Mössbauer spectroscopy (MS), transmission electron microscopy (TEM), and selected area electron diffraction (SAED), etc. A temperature of about 200 °C was identified to be an appropriate hydrothermal condition to obtain Ni_0.5Zn_0.5Fe₂O₄-MWCNTs, being lower than the synthesis temperature of a single-phase Ni_0.5Zn_0.5Fe₂O₄ nanocrystals. The sizes of Ni_0.5Zn_0.5Fe₂O₄ in the composites were smaller than those of Ni_0.5Zn_0.5Fe₂O₄ nanocrystals in single phase. The composites exhibited more superparamagnetic than Ni_0.5Zn_0.5Fe₂O₄ nanocrystals in their relaxation behaviors. The magnetic properties measured by a vibrating sample magnetometer showed that the composites had a high coercive field of 386.0 Oe at room temperature, higher than those of MWCNT and Ni_0.5Zn_0.5Fe₂O₄ nanocrystals.     

One-dimensional NiCuZn ferrite nanostructures: Fabrication, structure, and magnetic properties

Ni_0.5−xCu_xZn_0.5Fe₂O₄ (0.0≤x≤0.5) ferrite nanofibers with diameters of 80-160 nm have been prepared by electrospinning and subsequent heat treatment. Both the average grain size and lattice parameter are found to increase with the addition of copper. Fourier transform infrared spectra indicate that the portion of Fe³⁺ ions at the tetrahedral sites move to the octahedral sites as some of the substituted Cu²⁺ ions get into the tetrahedral sites. Vibrating sample magnetometer measurements show that the coercivity of these ferrite nanofibers decreases with increasing Cu concentration, whereas the specific saturation magnetization initially increases, reaches a maximum value at x=0.2 and then decreases with the Cu content further increase. Notable differences in magnetic properties at room temperature (298 K) and 77 K for the Ni_0.3Cu_0.2Zn_0.5Fe₂O₄ nanofibers and corresponding powders are observed and mainly arise from the grain size and morphological variations between these two materials.     

Revised phase diagram of Li2MoO4-ZnMoO4 system, crystal structure and crystal growth of lithium zinc molybdate

Orthorhombic lithium zinc molybdate was first chosen and explored as a candidate for double beta decay experiments with ¹⁰⁰Mo. The phase equilibria in the system Li₂MoO₄-ZnMoO₄ were reinvestigated, the intermediate compound Li₂Zn₂(MoO₄)₃ of the α-Cu₃Fe₄(VO₄)₆ (lyonsite) type was found to be nonstoichiometric: Li_2−2xZn_2+x(MoO₄)₃ (0≤x≤0.28) at 600 °C. The eutectic point corresponds to 650 °C and 23 mol% ZnMoO₄, the peritectic point is at 885 °C and 67 mol% ZnMoO₄. Single crystals of the compound were prepared by spontaneous crystallization from the melts and fluxes. In the structures of four Li_2−2xZn_2+x(MoO₄)₃ crystals (x=0; 0.03; 0.21; 0.23), the cationic sites in the face-shared octahedral columns were found to be partially filled and responsible for the compound nonstoichiometry. It was first showed that with increasing the x value and the number of vacancies in M3 site, the average M3-O distance grows and the lithium content in this site decreases almost linearly. Using the low-thermal-gradient Czochralski technique, optically homogeneous large crystals of lithium zinc molybdate were grown and their optical, luminescent and scintillating properties were explored.     

Aurivillius phases of PbBi4Ti4O15 doped with Mn synthesized by molten salt technique: Structure, dielectric, and magnetic properties

Doping of manganese (Mn³⁺/Mn⁴⁺) into the Aurivillius phase Pb_1−xBi_4+xTi_4−xMn_xO₁₅ was carried out using the molten salt technique for various Mn concentrations (x=0, 0.2, 0.4, 0.6, 0.8, and 1). Single phase samples could be obtained in the composition range with x up to 0.6 as confirmed by X-ray and neutron diffraction analysis. Dielectric measurements show a peak at 801, 803, 813 and 850 K for samples with x=0, 0.2, 0.4, and 0.6, respectively, related to the ferroelectric transition temperature (T_c). The main contribution of the in-plane polarization for x≤0.2 which was calculated from the atomic positions obtained by the structure analysis is the dipole moment in the Ti(1)O₆ layer; however, for x≥0.4 the polarization originates from the dipole moment in the Ti(2)O₆ layer. Mn doping in the Pb_1−xBi_4+xTi_4−xMn_xO₁₅ does not show any long range magnetic ordering.     

Ultrasonic-assisted synthesis of PMMA/Ni0.5Zn0.5Fe2O4 nanocomposite in mixed surfactant system

PMMA/Ni_0.5Zn_0.5Fe₂O₄ nanocomposite with superparamagnetic behavior was synthesized by in situ emulsion polymerization of methylmethacrylate (MMA) monomer in the presence of Ni_0.5Zn_0.5Fe₂O₄ colloidal suspension assisted by ultrasonic irradiation. The obtained samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectra (FT-IR), transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM). XRD and FT-IR spectra confirmed the formation of PMMA/Ni_0.5Zn_0.5Fe₂O₄ nanocomposite. TEM images showed that Ni_0.5Zn_0.5Fe₂O₄ nanoparticles with the particle sizes of about 12 nm were well dispersed in the polymer matrix. The nanocomposite at room temperature exhibited superparamagnetic behavior under applied magnetic field. The formation mechanism of PMMA/Ni_0.5Zn_0.5Fe₂O₄ nanocomposite was proposed as well.     

Synthesis and characterization of NixMg1−xAl2O4 nano ceramic pigments via a combustion route

MgAl₂O₄ was successfully used as a crystalline host network for the synthesis of nickel-based nano cyan refractory ceramic pigments. Different compositions of Ni_xMg_1−xAl₂O₄ (0.1 ? x ? 0.8) powders have been prepared by using a low temperature combustion reaction (LTCR) of the corresponding metal nitrates with urea (U) as a fuel at 300 °C in an open air furnace. The as-synthesized samples were characterized by thermal analysis (TG-DTG/DTA), X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). UV-Vis and diffuse reflectance spectroscopy (DRS) using CIE- L^∗a^∗b^∗ parameters methods have been used for color measurements. The results show that the Ni_xMg_1−xAl₂O₄ samples are the crystalline phase with a particle size of 8.85-43.66 nm in the temperature range 500-1200 °C. The density, particle size, shape and color are determined for all the prepared samples with different calcination times and temperatures.     

Nanocrystalline ferrites NixZn1−xFe2O4: Influence of cation distribution on acidic and gas sensing properties

This work is devoted to a detailed analysis of the interconnection between composition, cation distribution and acidic properties of the surface of nanocrystalline ferrites Ni_xZn_1−xFe₂O₄ obtained by aerosol pyrolysis. The detailed analysis of the Mössbauer spectra allows us to determine the distribution of cations between tetrahedral and octahedral positions in spinel structure. Depending on samples composition, the tetrahedral positions can be occupied by only Fe³⁺ cations (inverse spinel, x≥0.4) or by Fe³⁺ and Zn²⁺ cations (mixed spinel, x=0, 0.2). Increasing the nickel concentration in the ferrite leads to decrease in the number of strong acid centers on the surface. It was found that the decrease in the contribution of strong surface acid sites leads to an increase in sensory sensitivity of the ferrite towards ammonia. For ethanol detection an inverse relationship between sensor signal and surface acidity was observed.     

Investigation of the quasi-ternary system LaMnO3-LaCoO3-“LaCuO3”—I: the series La(Mn0.5Co0.5)1−xCuxO3−δ

The La(Mn_0.5Co_0.5)_1−xCu_xO_3−δ series with x=0, 0.05, 0.1, 0.2, 0.4, 0.6, 0.8 and 1 was synthesized by the Pechini method to obtain insight into the phase formation in the quasi-ternary LaMnO₃-LaCoO₃-“LaCuO₃” system caused by the instability of LaCuO₃ under ambient conditions. After sintering at 1100°C some remarkable results were obtained: LaMn_0.3Co_0.3Cu_0.4O_3−δ crystallized as a single phase in the orthorhombic perovskite structure typical of LaCuO₃. Among the synthesized compositions this compound showed the highest electrical conductivity in air at 800°C (155 S cm⁻¹) and also the highest thermal expansion coefficient (α_30−800°C=15.4×10⁻⁶ K⁻¹). The LaCuO_3−δ composition also crystallized as a single phase but in a monoclinic structure although previous investigations have shown that other phases are preferably formed after sintering at 1100°C. The electrical conductivity and thermal expansion coefficient were the lowest within the series of compositions, i.e. 9.4 S cm⁻¹ and 11.9×10⁻⁶ K⁻¹, respectively.     

La0.6Sr1.4MnO4 layered perovskite anode material for intermediate temperature solid oxide fuel cells

La_0.6Sr_1.4MnO₄ (LSMO₄) layered perovskite with K₂NiF₄ structure was prepared and evaluated as anode material for La_0.8Sr_0.2Ga_0.83Mg_0.17O_3 − δ (LSGM) electrolyte supported intermediate temperature solid oxide fuel cells (IT-SOFCs). X-ray diffraction results show that LSMO₄ is redox stability. Thermal expansion coefficient of LSMO₄ is close to that of LSGM electrolyte. By adopting LSMO₄ as anode and La_0.6Sr_0.4Co_0.8Fe_0.2O₃ (LSCF) as cathode, maxium power densities of 146.6, 110.9 mW cm^− 2 with H₂ fuel at 850, 800 °C and 47.3 mW cm^− 2 with CH₄ fuel at 800 °C were obtained, respectively. Further, the cell demonstrated a reasonably stable performance under 180 mA cm^− 2 for over 40 h with H₂ fuel at 800 °C.     

Effect of composition on structural and magnetic properties of nanocrystalline Ni0.8−xZn0.2MgxFe2O4 ferrite

Nanocrystalline magnetic particles of Ni_0.8−xZn_0.2Mg_xFe₂O₄ ferrites with x lying between 0.0 and 0.8 were synthesized using metal nitrates and freshly extracted egg-white. The synthesized powders were characterized using X-ray diffraction (XRD), Fourier transform infrared (FT-IR) and transmission electron microscopy (TEM). With increasing magnesium concentration, the lattice constant increases while X-ray density decreases. The average crystallite size determined from XRD data using Scherrer formula lie in the range of 35–59 nm. TEM image shows spherically agglomerated particles with average crystallite size agreed well with that obtained from XRD. Magnetic properties measured at room temperature by vibrating sample magnetometer (VSM) reveal a decrease in saturation magnetization up to Mg content of 0.6. In agreement with FT-IR results, the unexpected increase in the magnetization at Mg content of 0.8 can be attributed to the tendency of Mg²⁺ ions to occupy the tetrahedral site. The decrease in the value of coercivity with increasing magnesium content can be explained based on the magneto-crystalline anisotropy.     

Photoluminescence in the CaxSr1−xWO4 system at room temperature

In this work, a study was undertaken about the structural and photoluminescent properties, at room temperature, of powder samples from the Ca_xSr_1−xWO₄ (x=0-1.0) system, synthesized by a soft chemical method and heat treated between 400 and 700 °C. The material was characterized using Infrared, UV-vis and Raman spectroscopy and XRD. The most intense PL emission was obtained for the sample calcined at 600 °C, which is neither highly disordered (400-500 °C), nor completely ordered (700 °C). Corroborating the role of disorder in the PL phenomenon, the most intense PL response was not observed for pure CaWO₄ or SrWO₄, but for Ca_0.6Sr_0.4WO₄. The PL emission spectra could be separated into two Gaussian curves. The lower wavelength peak is placed around 530 nm, and the higher wavelength peak at about 690 nm. Similar results were reported in the literature for both CaWO₄ and SrWO₄.     

Oxygen non-stoichiometry of Ln4Ni2.7Fe0.3O10−δ (Ln=La, Pr)

The oxygen deficiency of iron-substituted nickelates Ln₄Ni_2.7Fe_0.3O_10−δ (Ln=La, Pr) with the orthorhombic Ruddlesden-Popper structure was studied by thermogravimetric analysis and coulometric titration in the oxygen partial pressure range 6×10⁻⁵ to 0.7 atm at 973-1223 K. In air, the non-stoichiometry values vary in the relatively narrow ranges (2.4−4.2)×10⁻² for La- and (0.01−2.0)×10⁻² for Pr-containing compositions, increasing with temperature. Due to the smaller size of praseodymium cations, Pr₄Ni_2.7Fe_0.3O_10−δ exhibits a substantially lower thermodynamic stability in comparison with La₄Ni_2.7Fe_0.3O_10−δ and La₄Ni₃O_10−δ, although the oxygen content in Pr₄Ni_2.7Fe_0.3O_10−δ lattice is higher. The partial substitution of iron for nickel has no essential effect on the low-p(O₂) stability limit corresponding to the transition of Pr₄Ni₃O_10−δ into K₂NiF₄-type Pr₂NiO_4+δ. On the contrary, doping of La₄Ni₃O_10−δ with iron decreases the oxygen vacancy concentration and shifts the phase stability boundary towards lower oxygen chemical potentials, suggesting a stabilization of the transition metal-oxygen octahedra in lanthanum nickelate lattice. The Mössbauer spectroscopy showed that the predominant state of iron cations, statistically distributed between the nickel sites, is trivalent.     

Temperature and composition dependent structural investigation of the defect perovskite series Sr1−xTi1−2xNb2xO3, 0≤x≤0.2

The crystal structure of the defect perovskite series Sr_1−xTi_1−2xNb_2xO₃ has been investigated over a range of temperatures using high-resolution synchrotron X-ray diffraction, neutron diffraction and electron diffraction. Three distinct regions were observed: 0<x≤0.125 was a solid solution of Sr_1−xTi_1−2xNb_2xO₃ with minor SrTiO₃ intergrowth, 0.125<x≤0.2 was a pure Sr_1−xTi_1−2xNb_2xO₃ solid solution adopting the cubic perovskite type structure (Pm3¯m) and for x>0.2 Sr_0.8Ti_0.6Nb_0.4O₃ and Sr₃TiNb₄O₁₅ formed a two phase region. The cubic structure for Sr_0.8Ti_0.6Nb_0.4O₃ was stable over the temperature range 90-1248 K and the thermal expansion co-efficient was determined to be 8.72(9)×10⁻⁶ K⁻¹. Electron diffraction studies revealed diffuse scattering due to local scale Ti/Nb displacements and slightly enhanced octahedral rotations that did not lead to long range order. The octahedral rotations were observed to ‘lock-in’ at temperatures below ∼75 K resulting in a tetragonal structure (I4/mcm) with anti-phase octahedral tilting about the c-axis.     

Preparation of MnxNi0.5-xZn0.5Fe2O4 Nanorods by the Co-precipitation Method

Mn_xNi_0:5-xZn_0:5Fe₂O₄ nanorods were successfully synthesized by the thermal treatment of rod-like precursors that were fabricated by the co-precipitation of Mn²⁺, Ni²⁺, and Fe²⁺ in the lye. The phase, morphology, and particle diameter were examined by the X-ray diffrac-tion and transmission electron microscopy. The magnetic properties of the samples were stud-ied using a vibrating sample magnetometer. The results indicated that pure Ni_0:5Zn_0:5Fe₂O₄ nanorods with a diameter of 35 nm and an aspect ratio of 15 were prepared. It was found that the diameter of the Mn_xNi_0:5-xZn_0:5Fe₂O₄ (0≤x≤0.5) samples increased, the length and the aspect ratio decreased, with an increase in x value. When x=0.5, the diameter and the aspect ratio of the sample reached up to 50 nm and 7～8, respectively. The coercivity of the samples first increased and then decreased with the increase in the x value. The coer-civity of the samples again increased when the x value was higher than 0.4. When x=0.5,the coercivity of the Mn_xNi_0:5-xZn_0:5Fe₂O₄ sample reached the maximal value (134.3 Oe)at the calcination temperature of 600 oC. The saturation magnetization of the samples first increased and then decreased with the increase in the x value. When x=0.2, the satura-tion magnetization of the sample reached the maximal value (68.5 emu/g) at the calcination temperature of 800 oC.