Determination of bioavailable iron in noncontaminated Slovak soils by flame atomic absorption spectrometry

A method for the extraction of bioavailable iron from soils from various parts of Slovakia using a buffered diethylenetriaminepentaacetic acid (DTPA) solution was utilized. The extractant consists of 0.005 mol dm⁻³ DTPA, 0.1 mol dm⁻³ CaCl₂, and 0.1 mol dm⁻³ triethanolamine with pH of 7.3. DTPA was selected as the chelating agent because it can effectively extract micronutrient metal, iron. Distribution of iron in the horizons of various types of soils with respect to bioavailable iron was evaluated. The bioavailable iron in the extracts was determined by flame atomic absorption spectrometry. The calibration standards were prepared in the same surroundings as the extracts. Comparing to the average of 2.7–3.7 % total iron contents in Slovak soils, the available amounts of iron represent in average only very small amounts, approximately 0.3 % in comparison to total amounts.     

Application of the catalytic properties of N-methylthiourea to the determination of In(III) at low levels by square wave voltammetry

Abstract  

This article proposes a simple and fast method of In(III) determination in the presence of Cd(II) and Pb(II). The catalytic activity of N-methylthiourea was used in the In(III) electroreduction, which also had a slight effect on the electroreduction process of Cd(II) and Pb(II). By applying square wave voltammetry it was possible to determine 3 × 10⁻⁷ mol dm⁻³ In(III) in the presence of 5 × 10⁻⁵ mol dm⁻³ Cd(II) and 1 × 10⁻⁴ mol dm⁻³ Pb(II) in 5 mol dm⁻³ NaClO₄ at pH 2. The calibration curve for In(III) was linear from 3 × 10⁻⁷ to 5 × 10⁻⁴ mol dm⁻³. The relative standard deviation for In(III) determination was about 3.0%.     

Study of the chemical properties of gravitation dust sediments

The chemical properties of the gravitation dust sediment particles depend on their source. Two samples of the gravitation dust sediment have been investigated. The first sample, collected in locality Košice – Vel’ká Ida, near by U.S. Steel Ltd. (a metallurgy plant), represents the metallurgy industry pollutants. The second sample, collected in Košice city, represents the urban dust. Dust sediments particles create a non-homogeneous system. For this reason, the particles size distribution has been studied. On the base of the obtained experimental results one sample was divided into two approximately same mass fractions. The mineralogical composition of the dust particles matrix was determined by DTA, XRD, and SEM-EDS analyses. The total content of the chosen trace risk elements was defined by various AAS methods. The physical–chemical forms of elements in the dust sediment are characterised by different mobility and biotoxicity. The single-step extraction was used for the isolation of various element forms. 1 mol · dm⁻³ NH₄NO₃, 0.05 mol · dm⁻³ EDTA, and 2 mol · dm⁻³ HNO₃ were used as extraction reagents. The content of the elements in extracts was determined by the FAAS method.     

Selective solid-phase extraction of Cu(II) using freshly precipitated lead diethyldithiocarbamate and its spectrophotometric determination

A new solid-phase extraction method has been developed for the selective extraction of Cu(II) in an aqueous system using freshly precipitated lead diethyldithiocarbamate (Pb(DDTC)₂) as a reagent. The method is based on the quantitative replacement of Pb(II) ions in the solid Pb(DDTC)₂ phase by Cu(II) ions present in aqueous phase. The obtained solid Cu(DDTC)₂ phase was dissolved in chloroform and determined spectrophotometrically at 435 nm. Beer’s law was obeyed over the concentration range of 0.2–5 mg dm⁻³. The molar absorptivity and the Sandell’s sensitivity coefficients of the solutions were 1.0689 × 10⁴ dm³ mol⁻¹ cm⁻¹ and 0.0060 μg cm⁻², respectively. The optimum conditions for each parameter were experimentally determined and possible interferences of various salts were also studied. The method has been validated and applied to determine Cu(II) in various alloys and water samples.     

Determination of bioavailable fractions of Zn, Cu, Ni, Pb and Cd in soils and sludges by atomic absorption spectrometry

The single extraction procedures validated by the standards, measurement and testing programme (formerly BCR), extraction with 0.05 mol l⁻¹ EDTA and 0.43 mol l⁻¹ acetic acid, have been applied to reference materials of soils and sludges with certified total values of elements, in order to determine bioavailable contents of Cd, Cu, Ni, Pb and Zn. These soils, which represent uncontaminated pedologically different types of soils from Slovakia and sludges from city water treatment are characterized for the bioavailable fraction of the metals using the procedures followed by SM&T Programme. Concentrations of the elements under the study in the extracts were determined by flame (FAAS) using calibration curves in appropriate extractants and by electrothermal (ETAAS) atomic absorption spectrometry, using technique of standard additions for the evaluation of the results. The accuracy of the extraction procedures and determinations of the elements in the extracts was controlled using CRM 483 certified for EDTA- and acetic acid-extractable contents of Cd, Cu, Ni, Pb and Zn in sewage sludge amended soil.     

Cathodic Adsorptive Stripping Voltammetry for Estimation of the Forest Area Pollution with Nickel and Cobalt

 Necessary conditions were established for simultaneous nickel and cobalt determination in environmental samples, such as oak wood and soil, based on cathodic adsorptive stripping voltammetry. Ni(II) and Co(II), complexed with dimethylglyoxime, were determined using a hanging mercury drop electrode. Optimum conditions were found to be: accumulation time 90 s, accumulation potential −0.80 V vs. SCE, supporting electrolyte 0.2 mol dm⁻³ ammonia-ammonium chloride buffer (pH = 9.4) + 0.05 mol dm⁻³ NaNO₂ and dimethylglyoxime 2 × 10⁻⁴ mol dm⁻³. A linear current-concentration relationship was observed up to 7.51×10 ⁻⁷ mol dm⁻³ for Ni(II) and 7.0 × 10⁻⁷ mol dm⁻³ for Co(II). Excess amounts of zinc(II) interfering with cobalt peaks were masked by complexation with EDTA. Wood and soils were mineralized by applying a microwave digestion system, using the mixtures H₂O₂ + HNO₃ or HNO₃ + HF, respectively. The developed procedure was tested by analysing international reference materials (BCR 62 Olive Leaves and GBW 08302 Tibet Soil). The developed procedure was used to determine pollution of oak stand with nickel and cobalt in different regions of Poland. Received August 10, 2000. Revision May 22, 2001.     

Development of a sequential injection anodic stripping voltammetry (SI-ASV) method for determination of Cd(II), Pb(II) and Cu(II) in wastewater samples from coatings industry

This paper describes the development and validation of a sequential injection (SI) anodic stripping voltammetry (ASV) method using the hanging mercury drop electrode for accumulation of the heavy metal cations Cu(II), Pb(II) and Cd(II). The method was applied to wastewater samples after proper acid digestion in open vessels to eliminate matrix effects. For a deposition time of 90 s at the flow rate of 10 μl s⁻¹, the detection limits of the method were 0.06, 0.09 and 0.16 μmol L⁻¹ for Cd, Pb and Cu, respectively. Under these conditions the linear dynamic range was between 0.20 and 9.0 μmol L⁻¹ and the sampling frequency was 30 analyses per hour. The relative standard deviation of the method was 3%(n=7) at the concentration level of 2.0 μmol L⁻¹. The accuracy of the method was evaluated by spiking the samples with known amounts of the metal cations, and by comparison with an independent analytical technique, the inductively coupled plasma atomic emission spectroscopy (ICP-AES). Average recoveries were around of 84%, and the results showed no evidence of systematic errors in comparison to the ICP-AES.     

Determination of total and extractable hydrogen peroxide in organic and aqueous solutions of uranyl nitrate

The development of a spectrophotometric method for the determination of hydrogen peroxide in uranyl nitrate solutions is reported. The method involves the measurement of the absorbance at 520 nm of a vanadyl peroxide species. This species was formed by the addition of a reagent consisting of vanadium (V) (50 mmol·dm⁻³) in dilute sulphuric acid (2 mol·dm⁻³ H₂SO₄). This reagent, after dilution, was also used as an extractant for organic phase samples. The method is simple and robust and tolerant of nitric acid and U(VI). Specificity and accuracy were improved by the application of solid phase extraction techniques to remove entrained organic solvents and Pu(IV). Reverse phase solid phase extraction was used to clean-up aqueous samples or extracts which were contaminated with entrained solvent. A solid phase extraction system based upon an extraction chromatography system was used to remove Pu(IV). Detection limits of 26 μmol·dm⁻³ (0.88 μg·cm⁻³) or 7 μmol·dm⁻³ (0.24 μg·cm⁻³) for, respectively, a 1 and 4 cm path length cell were obtained. Precisions of RSD=1.4% and 19.5% were obtained at the extremes of the calibration curve (5 mmol·dm⁻³ and 50 μmol·dm⁻³ H₂O₂, 1 cm cell). The introduction of the extraction and clean-up stages had a negligible effect upon the precision of the determination. The stability of an organic phase sample was tested and no loss of analyte could be discerned over a period of at least 5 days. The presence of trace levels of reductants interfered with the determination, e.g., hydrazine (<2 mmol·dm⁻³), but this effect was ameliorated by increasing the concentration of the colormetric reagent.     

Spectral and Thermal Studies of Mn(II), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) Complexes with 3-methylglutaric Acid

Mn(II), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) 3-methylglutarates were prepared as solids with general formula MC₆ H₈ O₄ ×n H₂ O, where n =0–8. Their solubilities in water at 293 K were determined (7.0×10⁻² −4.2×10⁻³ mol dm⁻³ ). The IR spectra were recorded and thermal decomposition in air was investigated. The IR spectra suggest that the carboxylate groups are mono- or bidentate. During heating the hydrated complexes lose some water molecules in one (Mn, Co, Ni, Cu) or two steps (Cd) and then mono- (Cu) or dihydrates (Mn, Co, Ni) decompose to oxides directly (Mn, Cu, Co) or with intermediate formation of free metals (Co, Ni). Anhydrous Zn(II) complex decomposes directly to the oxide ZnO. This revised version was published online in July 2006 with corrections to the Cover Date.     

A new method of evaluation of element pollutant mobility in sediments

The application of a strong chelating agent for the screening test of element mobility in sedimentary systems was investigated. Single-step and sequential extraction procedures were applied to four sediment samples collected from an industrially polluted region of Eastern Slovakia. A sequential extraction procedure (SEP), recommended by the Institute for Reference Materials and Measurements (IRMM), was applied and used as a reference extraction method. A single-step extraction with 0.05 mol dm⁻³ ethylenediaminetetraacetic acid (EDTA) was adapted for sediments when extraction conditions were optimised. The extraction efficiency of the single-step procedure was compared with that of SEP. The contents of elements extracted by Na2EDTA were in good agreement with the sum of the first three steps of the SEP for Fe, Mn, and Co. Na₂EDTA can therefore be considered capable to extract the majority of elements associated with the reducible sedimentary phase — bound to Fe and Mn oxides in the regional geological conditions of the monitored region. Thus, Na₂EDTA extraction of Fe and Mn can serve as an economical, time-saving supplementary test for the IRMM procedure. This paper is dedicated to the memory of Erika Krakovská Presented at the XVIIIth Slovak Spectroscopic Conference, Spišská Nová Ves, 15–18 October 2006.     

Effect of selenium oxidation state on cadmium translocation in chamomile plants

Syntheses and spectral characteristics of cadmium(II) compounds (CdSeO₄, CdSeO₃, and Cd(NCSe)₂(nia)₂) containing selenium in oxidation states (VI), (IV), and (-II) are described. In Cd(NCSe)₂(nia)₂, nicotinamide (nia) and selenocyanate anions are bonded to Cd atom as N-donor monodentate ligands. Nicotinamide is coordinated through the ring nitrogen atom. The effects of these selenium compounds as well as Cd(NCS)₂(nia)₂ on the growth and Cd accumulation in roots and shoots of hydroponically cultivated chamomile plants (cultivar Lutea) were studied. In the applied concentration range (12–60 μmol dm⁻³) Cd(NCS)₂(nia)₂ affected neither the length nor the dry mass of roots and shoots. Other compounds applied at 24 μmol dm⁻³ and 60 μmol dm⁻³ significantly reduced dry mass of roots and shoots. Selenium oxidation state in the cadmium compounds affected Cd accumulation in plant organs as well as Cd translocation within the plants, which was reflected in the values of bioaccumulation (BAF) and translocation factors (S/R). Cd amount accumulated by shoots was lower than that in the roots. The highest BAF values determined for Cd accumulation in shoots were obtained with CdSeO₄. Substitution of S with Se in the Cd(NCX)₂(nia)₂ (X = Se or S) caused an increase of Cd translocation into the shoots. Presented at the XVIIIth Slovak Spectroscopic Conference, Spišská Nová Ves, 15–18 October 2006.     

Kinetics and the Mechanism of Iron(II) Reduction of cis-α-halogeno(cetylamine) (triethylenetetramine)cobalt(III) Complex Ion in Aqueous Acid Medium

The kinetics and mechanism of iron(II) reduction of cis- α-chloro/bromo(cetylamine)(triethylenetetramine) cobalt(III) surfactant complex ions were studied spectrophotometrically in an aqueous acid medium by following the disappearance of Co^III using an excess of the reductant under pseudo-first-order conditions: [Fe^II = 0.25 mol dm⁻³, [H⁺ = 0.1 mol dm⁻³, [μ = 1.0 mol dm⁻³ ionic strength in a nitrogen atmosphere at 303, 308 and 313 K. The reaction was found to be second order and showed acid independence in the range [H⁺ = 0.05−0.25 mol dm⁻³. The second order rate constant increased with Co^III concentration and the presence of aggregation of the complex itself altered the reaction rate. The effects of [Fe^II], [H⁺] and [ μ] on the rate were determined. Activation and thermodynamic parameters were computed. It is suggested that the reaction of Fe²⁺(aq) with Co^III complex proceeds by an inner-sphere mechanism.     

Electrochemical behavior of electrodeposited film derived from rhein and its activity towards myoglobin reduction

The stable electroactive thin film of rhein has been investigated by cyclic voltammetry and electrochemical impedance spectroscopy. Electrochemical impedance spectroscopy of the electrodeposited film derived from rhein indicated the electrode reaction was kinetically controlled in the region of higher frequency, the charge transfer resistance was 2.6×10³ Ω cm² and capacitance value was 13.2 μF cm² . The electrodeposited film derived from rhein exhibited a good electrocatalytic activity for myoglobin (Mb) reduction. In 0.30 mol dm⁻³ H₂SO₄solution, the catalysis currents were proportional to the concentrations of Mb over the range of 1.5×10⁻⁷–1.3×10⁻⁵ mol dm⁻³. The detection limit is 1.0×10⁻⁷ mol dm⁻³ (S/N=3). The relative standard deviation is 4.8% for eight successive determinations of 5.0×10⁻⁷ mol dm⁻³ Mb.     

Determination of water-soluble and insoluble (dilute-HCl-extractable) fractions of Cd,Pb and Cu in Antarctic aerosol by square wave anodic stripping voltammetry: distribution and summer seasonal evolution at Terra Nova Bay (Victoria Land)

Eight PM10 aerosol samples were collected in the vicinity of the “Mario Zucchelli” Italian Antarctic Station (formerly Terra Nova Bay Station) during the 2000–2001 austral summer using a high-volume sampler and precleaned cellulose filters. The aerosol mass was determined by differential weighing of filters carried out in a clean chemistry laboratory under controlled temperature and humidity. A two-step sequential extraction procedure was used to separate the water-soluble and the insoluble (dilute-HCl-extractable) fractions. Cd, Pb and Cu were determined in the two fractions using an ultrasensitive square wave anodic stripping voltammetric (SWASV) procedure set up for and applied to aerosol samples for the first time. Total extractable metals showed maxima at midsummer for Cd and Pb and a less clear trend for Cu. In particular, particulate metal concentrations ranged as follows: Cd 0.84–9.2 μg g⁻¹ (average 4.7 μg g⁻¹), Pb 13.2–81 μg g⁻¹ (average 33 μg g⁻¹), Cu 126–628 μg g⁻¹ (average 378 μg g⁻¹). In terms of atmospheric concentration, the values were: Cd 0.55–6.3 pg m⁻³ (average 3.4 pg m⁻³), Pb 8.7–48 pg m⁻³ (average 24 pg m⁻³), Cu 75–365 pg m⁻³ (average 266 pg m⁻³). At the beginning of the season the three metals appear widely distributed in the insoluble (HCl-extractable) fraction (higher proportions for Cd and Pb, 90–100%, and lower for Cu, 70–90%) with maxima in the second half of December. The soluble fraction then increases, and at the end of the season Cd and Pb are approximately equidistributed between the two fractions, while for Cu the soluble fraction reaches its maximum level of 36%. Practically negligible contributions are estimated for crustal and sea-spray sources. Low but significant volcanic contributions are estimated for Cd and Pb (∼10% and ∼5%, respectively), while there is an evident although not quantified marine biogenic source, at least for Cd. The estimated natural contributions (possibly including the marine biogenic source) cannot account for the high fractions of the metal contents, particularly for Pb and Cu, and this suggests that pollution from long-range transport is the dominant source. Figure Aerosol sampling in Antarctica     

Effect of addition of ameliorative materials on the distribution of As,Cd, Pb,and Zn in extractable soil fractions

The effects of lime, limestone, and zeolite addition on the availability of As, Cd, Pb, and Zn in three contaminated soils were investigated in a pot experiment after four vegetation periods of spring wheat, spring barley, and oat. The results showed different responses of extractable element portions to soil amendment when 0.01 mol dm⁻³ aqueous CaCl₂ was applied as a soil extraction agent. Substantial differences were evident among the investigated elements as well as among the individual soil treatments. Except natural zeolite, the ability of ameliorative materials to redistribute cadmium and zinc from a soil solution into less mobile but labile soil fractions was observed. The lead availability was less affected and the extractability of arsenic even increased in some of the treated pots. Moreover, the availability of arsenic was more affected by different characteristics of experimental soils than by individual soil treatments. It was found that these treatments can be applied neither for multicontaminated nor for all the soil types. The soil treatments had a lower effect on the less mobile soil fractions. Presented at the XVIIIth Slovak Spectroscopic Conference, Spišská Nová Ves, 15–18 October 2006.     

Influence of EDTA,carboxylic acids,amino- and hydroxocarboxylic acids and monosaccharides on the generation of arsines in hydride generation atomic absorption spectrometry

The influence of EDTA, carboxylic acids, amino-and hydroxocarboxylic acids, monosaccharides and humic substances on the generation of arsines in hydride generation atomic absorption spectrometry (HGAAS) was investigated. EDTA (0.02 mol L⁻¹), ascorbic acid (0.02 mol L⁻¹) and glucose or fructose (0.2 mol L⁻¹) are useful additives for levelling sensitivities for As(III), monomethylarsonate (MMA) and dimethylarsinate (DMA). The presence of glycine, malonic, tartaric acids, BICIN and soil humin extracts leads to differences in analytical signal response between these arsenic species. An analytical application to the determination of the sum of As(III), monomethylarsonate (MMA) and dimethylarsinate (DMA) as well as the sum of toxicologically relevant hydride forming arsenic fraction As(III) + As(V) + MMA + DMA in EDTA soil/sediment extracts using continuous flow HGAAS was demonstrated. The limit of detection was 0.2 mg kg⁻¹ As. Within-day and between-day precision were in the range 3–7% and 4–10%, respectively, for arsenic contents of 0.7–25 mg kg⁻¹, with recoveries 95–103%.      

Stability constants of oxalate complexes of copper (II) and nickel (II) by paper electrophoresis

Summary Stability constants of copper (II) and nickel (II) oxalates have been determined by paper electrophoresis. Oxalic acid (0.005 mol dm⁻³) was added to the background electrolyte: 0.1 mol dm⁻³ HClO₄. The proportions of HC₂O ₄ ⁻ and C₂O ₄ ²⁻ were varied by changing the pH of the electrolyte, these anions yielding the complex ions MHC₂O ₄ ⁺ and M(C₂O₄) ₂ ²⁻ , average values of the stability constants for which are 10^2.4 and 10^7.6 respectively for Cu(II), and 10^2.3 and 10^6.5 for Ni(II) (μ=0.1,30°).     

Synthesis and spectral studies of macrocyclic Pb(II), Zn(II), Cd(II) and La(III) complexes by template reaction of 1,2-bis(2-formylphenyl)ethane with metal nitrate and various diamine

Eight new macrocyclic complexes were synthesized by template reaction of 1,4-bis(3-aminopropoxy)butane or (±)-trans-1,2-diaminocyclohexane with metal nitrate and 1,2-bis(2-formylphenyl)ethane and their structures were proposed on the basis of elemental analysis, FT-IR, UV-Vis, molar conductivity measurements, ¹H NMR and mass spectra. The metals to ligand molar ratios of the complexes were found to be 1: 1. The complexes are 1: 2 electrolytes for Cd(II), Pb(II) and Zn(II) complexes and 1: 3 electrolytes for La(III) as shown by their molar conductivities (Λ_m) in DMSO at 10⁻³ mol L⁻¹. Due to the existence of free ions in these complexes, such complexes are electrically conductive. The configurations of Cd(II) and Zn(II) complexes were proposed to probably tetrahedral, La(III) complexes are octahedral and Pb(II) complexes are octahedral geometry in the L¹ complex and tetrahedral geometry in the L² complex.     

Liquid-liquid extraction of cadmium(II) from aqueous thiocyanate solutions with liquid anion-exchangers

An investigation has been made on the system liquid anion-exchanger-Cd(II)-NCS⁻. The influence of the acidity and thiocyanate concentration of the aqueous phase on the extraction has been studied. Using various methods of analysis, it has been shown that the complex anion present in the organic extracts is Cd(NCS) ₄ ²⁻ . Details are given concerning the removal of traces of Zn(II) from Cd(II)-containing solutions, and the quantitative separation of Cd(II) from Cr(III).     

Determination of trace Cd and Pb in natural waters by direct single drop microextraction combined with electrothermal atomic absorption spectrometry

A new method of direct single-drop microextraction combined with electrothermal atomic absorption spectrometry (ETAAS) is presented for the determination of trace Cd and Pb with dithizone (H₂DZ) as chelating reagent. Factors influencing the microextraction efficiency and determination, such as pH, microdrop volume, stirring rate, extraction time were evaluated. Under the optimized experimental conditions, the detection limits of the method are 2 and 90 pg mL⁻¹ for Cd and Pb, and the relative standards deviations for 0.5 ng mL⁻¹ Cd and 10 ng mL⁻¹ Pb are 11 and 12.8%. After 10 min of extraction, the enrichment factors for Cd and Pb are 118 and 90, respectively. The results for the determination of Cd and Pb in tap water, spring water, river water, pond water, lake water and spiked water samples demonstrate the accuracy, recovery and applicability of the method. An environmental water certified reference material (GSBZ 50009-88) was analyzed, and the determined values are in a good agreement with the certified values. Correspondence: Bin Hu, Department of Chemistry, Wuhan University, Wuhan 430072, P.R. China