Neutral Nickel Ethylene Oligo‐ and Polymerization Catalysts: Towards Computational Catalyst Prediction and Design

DFT calculations have been used to elucidate the chain termination mechanisms for neutral nickel ethylene oligo‐ and polymerization catalysts and to rationalize the kind of oligomers and polymers produced by each catalyst. The catalysts studied are the (κ²‐O,O)‐coordinated (1,1,1,5,5,5‐hexafluoro‐2,4‐acetylacetonato)nickel catalyst I , the (κ²‐P,O)‐coordinated SHOP‐type nickel catalyst II , the (κ²‐N,O)‐coordinated anilinotropone and salicylaldiminato nickel catalysts III and IV , respectively, and the (κ²‐P,N)‐coordinated phosphinosulfonamide nickel catalyst V . Numerous termination pathways involving β‐H elimination and β‐H transfer steps have been investigated, and the most probable routes identified. Despite the complexity and multitude of the possible termination pathways, the information most critical to chain termination is contained in only few transition states. In addition, by consideration of the propagation pathway, we have been able to estimate chain lengths and discriminate between oligo‐ and polymerization catalysts. In agreement with experiment, we found the Gibbs free energy difference between the overall barrier for the most facile propagation and termination pathways to be close to 0 kcal mol^?1 for the ethylene oligomerization catalysts I and V , whereas values of at least 7 kcal mol^?1 in favor of propagation were determined for the polymerization catalysts III and IV . Because of the shared intermediates between the termination and branching pathways, we have been able to identify the preferred cis/trans regiochemistry of β‐H elimination and show that a pronounced difference in σ donation of the two bridgehead atoms of the bidentate ligand can suppress hydride formation and thus branching. The degree of rationalization obtained here from a handful of key intermediates and transition states is promising for the use of computational methods in the screening and prediction of new catalysts of the title class.     

Why platinum catalysts involving ligands with large bite angle are so efficient in the allylation of amines: design of a highly active catalyst and comprehensive experimental and DFT study

The platinum-catalyzed allylation of amines with allyl alcohols was studied experimentally and theoretically. The complexes [Pt(eta(3)-allyl)(dppe)]OTf (2) and [Pt(eta(3)-allyl)(DPP-Xantphos)]PF(6) (5) were synthesized and structurally characterized, and their reactivity toward amines was explored. The bicyclic aminopropyl complex [Pt(CH(2)CH(2)CH(2)NHBn-kappa-C,N)(dppe)]OTf (3) was obtained from the reaction of complex 2 with an excess of benzylamine, and this complex was shown to be a deactivated form of catalyst 2. On the other hand, reaction of complex 5 with benzylamine and allyl alcohol led to formation of the 16-VE platinum(0) complex [Pt(eta(2)-C(3)H(5)OH)(DPP-Xantphos)] (7), which was structurally characterized and appears to be a catalytic intermediate. A DFT study showed that the mechanism of the platinum-catalyzed allylation of amines with allyl alcohols differs from the palladium-catalyzed process, since it involves an associative ligand-exchange step involving formation of a tetracoordinate 18-VE complex. This DFT study also revealed that ligands with large bite angles disfavor the formation of platinum hydride complexes and therefore the formation of a bicyclic aminopropyl complex, which is a thermodynamic sink. Finally, a combination of 5 and a proton source was shown to efficiently catalyze the allylation of a broad variety of amines with allyl alcohols under mild conditions.     

Amavadin and other vanadium complexes as remarkably efficient catalysts for one-pot conversion of ethane to propionic and acetic acids

Synthetic amavadin Ca[V{ON[CH(CH(3))COO](2)}(2)] and its models Ca[V{ON(CH(2)COO)(2)}(2)] and [VO{N(CH(2)CH(2)O)(3)}], in the presence of K(2)S(2)O(8) in trifluoroacetic acid (TFA), exhibit remarkable catalytic activity for the one-pot carboxylation of ethane to propionic and acetic acids with the former as the main product (overall yields up to 93 %, catalyst turnover numbers (TONs) up to 2.0 x 10(4)). The simpler V complexes [VO(CF(3)SO(3))(2)], [VO(acac)(2)] and VOSO(4) are less active. The effects of various factors, namely, C(2)H(6) and CO pressures, time, temperature, and amounts of catalyst, TFA and K(2)S(2)O(8), have been investigated, and this allowed optimisation of the process and control of selectivity. (13)C-labelling experiments indicated that the formation of acetic acid follows two pathways, the dominant one via oxidation of ethane with preservation of the C--C bond, and the other via rupture of this bond and carbonylation of the methyl group by CO; the C--C bond is retained in the formation of propionic acid upon carbonylation of ethane. The reactions proceed via both C- and O-centred radicals, as shown by experiments with radical traps. On the basis of detailed DFT calculations, plausible reaction mechanisms are discussed. The carboxylation of ethane in the presence of CO follows the sequential formation of C(2)H(5) (*), C(2)H(5)CO(*), C(2)H(5)COO(*) and C(2)H(5)COOH. The C(2)H(5)COO(*) radical is easily formed on reaction of C(2)H(5)CO(*) with a peroxo V catalyst via a V{eta(1)-OOC(O)C(2)H(5)} intermediate. In the absence of CO, carboxylation proceeds by reaction of C(2)H(5) (*) with TFA. For the oxidation of ethane to acetic acid, either with preservation or cleavage of the C-C bond, metal-assisted and purely organic pathways are also proposed and discussed.     

2-phosphanylphenolate nickel catalysts for the polymerization of ethylene

The previously unknown methallylnickel 2-diorganophosphanylphenolates (R=Ph, cHex) were synthesized and found to catalyze the polymerization of ethylene. To explore the potential for ligand-tuning, a variety of P-alkyl- and P-phenyl-2-phosphanylphenols was synthesized and allowed to react with [Ni(cod)(2)] (cod=1,5-cyclooctadiene) or with NiBr(2).DME and NaH. The complexes formed in situ with [Ni(cod)(2)] are generally active as ethylene polymerization catalysts with all the ligands tested, whereas the latter systems are inactive when 2-dialkylphosphanylphenols are applied. M(w) values, ranging from about 1000 to about 100000 g mol(-1), increase for various R(2)P groups in the order R=Ph相似文献   

Mechanism and exo-regioselectivity of organolanthanide-mediated intramolecular hydroamination/cyclization of 1,3-disubstituted aminoallenes: a computational study

The complete catalytic reaction course for the organolanthanide-assisted intramolecular hydroamination/cyclization (IHC) of 4,5-heptadien-1-ylamine by a prototypical [(eta(5)-Me5C5)2LuCH(SiMe3)2] precatalyst has been critically scrutinized by employing a reliable DFT method. A computationally verified mechanistic scenario for the IHC of 1,3-disubstituted aminoallene substrates has been proposed that is consistent with the empirical rate law determined by experiment and accounts for crucial experimental observations. It involves kinetically rapid substrate association and dissociation equilibria, facile and reversible intramolecular allenic C=C insertion into the Ln-N bond, and turnover-limiting protonation of the azacycle's tether functionality, with the amine-amidoallene-Ln adduct complex representing the catalyst's resting state. This mechanistic scenario bears resemblance to the mechanism that has been recently proposed in a computational exploration of aminodiene IHC. The unique features of the IHC of the two substrate classes are discussed. Furthermore, the thermodynamic and kinetic factors that control the regio- and stereoselectivity of aminoallene IHC have been elucidated. These achievements have provided a deeper insight into the catalytic structure-reactivity relationships in organolanthanide-assisted cyclohydroamination of unsaturated C-C functionalities.     

Theoretical insights into enantioselective catalysis: the mechanism of the Kharasch-Sosnovsky reaction

The mechanism of the Kharasch-Sosnovsky reaction has been investigated using B3 LYP/6-31G* calculations on a chiral reaction model [cyclohexene+tert-butyl perbenzoate-->cyclohex-2-enyl benzoate+tert-butyl alcohol, catalyzed by a chiral bisoxazoline-copper(I) complex]. Although two previous reaction mechanisms have been considered, the results are consistent with a new mechanistic pathway. This path involves ligand exchange between the catalyst-cyclohexene complex with tert-butyl perbenzoate to give a catalyst-perester complex, which undergoes an (either one- or two-step) oxidative addition reaction to yield a copper(III) complex. The limiting step of the Kharasch-Sosnovsky reaction consists of an intramolecular step involving the abstraction of an allylic hydrogen from cyclohexene [which is pi-bound to the copper(III) complex]. The resulting allyl-copper(III) complex (subsequent to the loss of tert-butanol) can undergo a haptotropic rearrangement by means of an eta1-allyl/eta3-allyl equilibrium, leading to scrambling between vinylic and allylic positions when an isotopically labeled substrate is used. The allyl-copper(III) ion undergoes a stereospecific reductive elimination involving the pi-bond migration to yield a reaction product-catalyst complex, which can regenerate the alkene-copper(I) complex by ligand exchange. The proposed reaction mechanism is consistent with all known experimental results (including enantioselectivity data).     

PCNCP Ligands in the Chromium‐Catalyzed Oligomerization of Ethylene: Tri‐ versus Tetramerization

Chromium(III) complexes bearing R′N(CH₂PR₂)₂ (PCNCP) ligands have been prepared. Upon activation with methylaluminoxane, these complexes proved to be effective in the selective tri‐ and tetramerization of ethylene. The formation of either 1‐hexene or 1‐octene was found to be highly dependent on the steric bulk of the substituents R on the phosphine moieties. This observation was rationalized by using density functional theory calculations on selected steps of the metallacyclic mechanism of the ethylene oligomerization reaction.     

Mechanism of Alkyne Alkoxycarbonylation at a Pd Catalyst with P,N Hemilabile Ligands: A Density Functional Study

A detailed mechanism for alkyne alkoxycarbonylation mediated by a palladium catalyst has been characterised at the B3PW91‐D3/PCM level of density functional theory (including bulk solvation and dispersion corrections). This transformation, investigated via the methoxycarbonylation of propyne, involves a uniquely dual role for the P,N hemilabile ligand acting co‐catalytically as both an in situ base and proton relay coupled with a Pd⁰ centre, allowing for surmountable barriers (highest ΔG^≠ of 22.9 kcal mol^?1 for alcoholysis). This proton‐shuffle between methanol and coordinated propyne accounts for experimental requirements (high acid concentration) and reproduces observed regioselectivities as a function of ligand structure. A simple ligand modification is proposed, which is predicted to improve catalytic turnover by three orders of magnitude.     

Mechanistic Origin of Cross‐Coupling Selectivity in Ni‐Catalysed Tishchenko Reactions

Mechanistic studies have been performed for the recently developed, Ni‐catalysed selective cross‐coupling reaction between aryl and alkyl aldehydes. A mono‐carbonyl activation (MCA) mechanism (in which one of the carbonyl groups is activated by oxidative addition) was found to be the most favourable pathway, and the rate‐determining step is oxidative addition. Analysing the origin of the observed cross‐coupling selectivity, we found the most favourable carbonyl activation step requires both coordination of the aryl aldehyde and oxidative addition of the alkyl aldehyde. Therefore, the stronger π‐accepting ability of the aryl aldehyde (relative to alkyl aldehyde) and the ease of oxidative addition of the alkyl aldehyde (relative to aryl aldehyde) are responsible for the cross‐coupling selectivity.     

Design of a Highly Active Pd Catalyst with P,N Hemilabile Ligands for Alkoxycarbonylation of Alkynes and Allenes: A Density Functional Theory Study

In the palladium-catalysed methoxycarbonylation of technical propyne, the presence of propadiene poisons the hemilabile Pd(P,N) catalyst. According to density functional theory calculations (B3PW91-D3/PCM level), a highly stable π-allyl intermediate is the reason for this catalyst poisoning. Predicted regioselectivities suggest that at least 11 % of propadiene should yield this allyl intermediate, in which the reaction gets stalled under the turnover conditions due to an insurmountable methanolysis barrier of 25.8 kcal mol⁻¹. The results obtained for different ligands and substrates are consistent with the available experimental data. A new ligand, (6-Cl-3-Me-Py)PPh₂, is proposed, which is predicted to efficiently control the branched/linear selectivity, avoiding rapid poisoning (with only 0.2 % of propadiene being trapped as the Pd allyl complex), and to tremendously increase the catalytic activity by decreasing the overall barrier to 9.1 kcal mol⁻¹.     

Silver(I)‐Catalyzed Addition of Phenols to Alkyne Cobalt Cluster Stabilized Carbocations

A smooth catalytic method to use phenols as the nucleophilic partner in the Nicholas reaction has been developed. The method uses either Ag^I or Au^I catalysts with AgClO₄ or AgBF₄ as the most efficient catalysts tested. Neither additional additives nor cocatalysts were required and the formation of the corresponding phenol adducts occurred in excellent yields. The process has the single limitation of the inability of less nucleophilic phenols (4‐nitrophenol) to generate the corresponding adducts. Additionally, the reaction is highly diastereoselective. DFT calculations allow a catalytic cycle to be proposed that involves trimetallic intermediates; the rate‐determining step of the reaction is hydroxy‐group elimination in a cobalt–silver trimetallic intermediate.     

Unmasking the Action of Phosphinous Acid Ligands in Nitrile Hydration Reactions Catalyzed by Arene–Ruthenium(II) Complexes

The catalytic hydration of benzonitrile and acetonitrile has been studied by employing different arene–ruthenium(II) complexes with phosphinous (PR₂OH) and phosphorous acid (P(OR)₂OH) ligands as catalysts. Marked differences in activity were found, depending on the nature of both the P‐donor and η⁶‐coordinated arene ligand. Faster transformations were always observed with the phosphinous acids. DFT computations unveiled the intriguing mechanism of acetonitrile hydration catalyzed by these arene–ruthenium(II) complexes. The process starts with attack on the nitrile carbon atom of the hydroxyl group of the P‐donor ligand instead of on a solvent water molecule, as previously suggested. The experimental results presented herein for acetonitrile and benzonitrile hydration catalyzed by different arene–ruthenium(II) complexes could be rationalized in terms of such a mechanism.     

Mechanistic Insights into Palladium‐Catalyzed Silylation of Aryl Iodides with Hydrosilanes through a DFT Study

The catalytic cycles of palladium‐catalyzed silylation of aryl iodides, which are initiated by oxidative addition of hydrosilane or aryl iodide through three different mechanisms characterized by intermediates R₃Si−Pd^II−H (Cycle A), Ar−Pd^II−I (Cycle B), and Pd^IV (Cycle C), have been explored in detail by hybrid DFT. Calculations suggest that the chemical selectivity and reactivity of the reaction depend on the ligation state of the catalyst and specific reaction conditions, including feeding order of substrates and the presence of base. For less bulky biligated catalyst, Cycle C is energetically favored over Cycle A, through which the silylation process is slightly favored over the reduction process. Interestingly, for bulky monoligated catalyst, Cycle B is energetically more favored over generally accepted Cycle A, in which the silylation channel is slightly disfavored in comparison to that of the reduction channel. Moreover, the inclusion of base in this channel allows the silylated product become dominant. These findings offer a good explanation for the complex experimental observations. Designing a reaction process that allows the oxidative addition of palladium(0) complex to aryl iodide to occur prior to that with hydrosilane is thus suggested to improve the reactivity and chemoselectivity for the silylated product by encouraging the catalytic cycle to proceed through Cycles B (monoligated Pd⁰ catalyst) or C (biligated Pd⁰ catalyst), instead of Cycle A.     

Surface-inspired molecular vanadium oxide catalysts for the oxidative dehydrogenation of alcohols: evidence for metal cooperation and peroxide intermediates

On the basis that thiacalix[4]arene (H(4)T4A) complex (PPh(4) )(2) [H(2)T4A(VO(2))](2) (Ia) was found to be an adequate functional model for surface species occurring on vanadium oxide based catalysts and itself catalyses the oxidative dehydrogenation (ODH) of alcohols, an analogue containing 2,2'-thiobis(2,4-di-tert-butylphenolate), (S)L(2-), as ligand, namely, (PPh(4))(2)[(S)LVO(2)](2) (II) was investigated in the same context. Despite the apparent similarity of Ia and II, studies on II revealed several novel insights, which are also valuable in connection with surfaces of vanadia catalysts: 1) For Ia and II similar turnover numbers (TONs) were found for the ODH of activated alcohols, which indicates that the additional OH units inherent to Ia do not contribute particularly to the activity of this complex, for instance, through prebinding of the alcohol. 2) On dissolution II enters into an equilibrium with a monomeric form, which is the predominant species in solution; nevertheless, ODH proceeds exclusively at the dimeric form, and this stresses the need for cooperation of two vanadium centres. 3) By omitting O(2) from the system during the oxidation of 9-fluorenol, the reduced form of the catalyst could be isolated and fully characterised (including single-crystal X-ray analysis). The corresponding intermediate had been elusive in case of thiacalixarene system Ia. 4) Reoxidation was found to proceed via a peroxide intermediate that also oxidises one alcohol equivalent. As the peroxide can also perform mono- and dioxygenation of the thioether group in II, after a number of turnovers the active catalyst contains a sulfone group. The reduced form of this ultimate catalyst was also isolated and structurally characterised. Possible implications of 1)-4) for the function of heterogeneous vanadia catalysts are discussed.     

Inner-Sphere Oxygen Activation Promoting Outer-Sphere Nucleophilic Attack on Olefins

Alkoxylation and hydroxylation reactions of 1,5-cyclooctadiene (cod) in an iridium complex with alcohols and water promoted by the reduction of oxygen to hydrogen peroxide are described. The exo configuration of the OH/OR groups in the products agrees with nucleophilic attack at the external face of the olefin as the key step. The reactions also require the presence of a coordinating protic acid (such as picolinic acid (Hpic)) and involve the participation of a cationic diolefin iridium(III) complex, [Ir(cod)(pic)₂]⁺, which has been isolated. Independently, this cation is also involved in easy alkoxy group exchange reactions, which are very unusual for organic ethers. DFT studies on the mechanism of olefin alkoxylation mediated by oxygen show a low-energy proton-coupled electron-transfer step connecting a superoxide–iridium(II) complex with hydroperoxide–iridium(III) intermediates, rather than peroxide complexes. Accordingly, a more complex reaction, with up to four different products, occurred upon reacting the diolefin–peroxide iridium(III) complex with Hpic. Moreover, such hydroperoxide intermediates are the origin of the regio- and stereoselectivity of the hydroxylation/alkoxylation reactions. If this protocol is applied to the diolefin–rhodium(I) complex [Rh(pic)(cod)], free alkyl ethers ORC₈H₁₁ (R=Me, Et) resulted, and the reaction is enantioselective if a chiral amino acid, such as l -proline, is used instead of Hpic.