Rate constant and products for the reaction of Cl atom with n‐butyraldehyde

The photooxidations of n‐butyraldehyde initiated by Cl atom were carried out at room temperature (298 ± 2K) and 1 atm pressure. The rate coefficient for the reactions of Cl atom with n‐butyraldehyde was determined as k = (2.04 ± 0.36) × 10^?10 cm³ molecule^?1 s^?1 by using relative rate techniques. The photooxidation products of n‐butyraldehyde reaction with Cl atom were also studied by using both gas chromatography‐mass spectrometry (GC‐MS) and gas chromatography techniques. C₂H₅CHO, CH₃CHO, CO and CO₂ were the major products observed. In the absence of NO, the observed yields of C₂H₅CHO, CH₃CHO, and CO were 60%, 3%, and 9%, respectively. However, when NO was introduced into the reaction chamber and the initial ratios of [NO]₀/[n‐butyraldehyde]₀ were between 1 and 8, the yield of C₂H₅CHO decreased to 33%, whereas that of CH₃CHO and CO rose up to 21% and 25%, respectively. On the basis of mechanism data deduced in this study and the fraction molar yields, the approximate branching ratios for Cl atom attack at ? C(O)H, α‐, β‐, and γ‐positions in n‐butyraldehyde could be derived as ?42%, <25%, 21%, and ?12%, respectively. © 2007 Wiley Periodicals, Inc. 39: 168–174, 2007     

Mild Oxidation of Alcohols with o‐Iodoxybenzoic Acid (IBX) in a Water/CH2Cl2 Mixture in the Presence of Phase‐Transfer Catalyst

A mild oxidation of alcohols to the respective carbonyl compounds with o‐iodoxybenzoic acid (IBX) catalyzed by n‐Bu₄NBr in a water/dichloromethane (1:1) mixture is described. The method offers the advantage of a simple, inexpensive catalyst and the diminution of organic solvent employed in the reaction.     

Rhodium Fluoroapatite Catalyzed Conjugate Addition of Arylboronic Acids to α,β‐Unsaturated Carbonyl Compounds

Rhodium fluoroapatite (RhFAP) is an efficient catalyst for conjugate addition of organoboron reagents to α,β‐unsaturated carbonyl compounds. A variety of arylboronic acids and α,β‐unsaturated carbonyl compounds were converted to the corresponding conjugate‐addition products, demonstrating the versatility of the reaction. The reaction is highly selective. RhFAP was recovered quantitatively by simple filtration, and reused for four cycles.     

Synthesis and Characterization of Poly(chiral methylpropargyl ester)s Carrying Azobenzene Moieties

Novel chiral methylpropargyl esters bearing azobenzene groups, namely, 4‐[4′‐(benzyloxy)phenylazophenyl]‐ carbonyl‐(S)‐1‐methylpropargyl ester ( e ), 4‐[4′‐(n‐butyloxy)phenylazophenyl]carbonyl‐(S)‐1‐methylpropargyl ester ( f ), 4‐[4′‐(n‐hexyloxy)phenylazophenyl]carbonyl‐(S)‐1‐methylpropargyl ester ( g ), and 4‐[4′‐(n‐octyloxy)phenylazo‐ phenyl]carbonyl‐(S)‐1‐methylpropargyl ester ( h ) were synthesized and polymerized with Rh⁺(nbd)[η⁶‐C₆H₅B^?‐ (C₆H₅)₃] (nbd=norbornadiene) catalyst to give the corresponding polymers with moderate molecular weights (M_n=8.4×10³–15.7×10³) in good yields (76%? –?91%). The structures of polymers were illustrated by IR and NMR spectroscopies. Polymers were soluble in comment organic solvents including toluene, CHCl₃ CH₂Cl₂, THF, and DMSO, while insoluble in diethyl ether, n‐hexane and methanol. Large optical rotations of polymer solutions demonstrated that all the polymers take a helical structure with a predominantly one‐handed screw sense in organic solvents.     

Octahedral Chiral‐at‐Metal Iridium Catalysts: Versatile Chiral Lewis Acids for Asymmetric Conjugate Additions

Octahedral iridium(III) complexes containing two bidentate cyclometalating 5‐tert‐butyl‐2‐phenylbenzoxazole ( IrO ) or 5‐tert‐butyl‐2‐phenylbenzothiazole ( IrS ) ligands in addition to two labile acetonitrile ligands are demonstrated to constitute a highly versatile class of asymmetric Lewis acid catalysts. These complexes feature the metal center as the exclusive source of chirality and serve as effective asymmetric catalysts (0.5–5.0 mol % catalyst loading) for a variety of reactions with α,β‐unsaturated carbonyl compounds, namely Friedel–Crafts alkylations (94–99 % ee), Michael additions with CH‐acidic compounds (81–97 % ee), and a variety of cycloadditions (92–99 % ee with high d.r.). Mechanistic investigations and crystal structures of an iridium‐coordinated substrates and iridium‐coordinated products are consistent with a mechanistic picture in which the α,β‐unsaturated carbonyl compounds are activated by two‐point binding (bidentate coordination) to the chiral Lewis acid.     

Asymmetric Conjugate Alkynylation of Cyclic α,β‐Unsaturated Carbonyl Compounds with a Chiral Diene Rhodium Catalyst

Asymmetric conjugate alkynylation of cyclic α,β‐unsaturated carbonyl compounds (ketones, esters, and amides) was realized by use of diphenyl[(triisopropylsilyl)ethynyl]methanol as an alkynylating reagent in the presence of a rhodium catalyst coordinated with a new chiral diene ligand (Fc‐bod; bod=bicyclo[2.2.2]octa‐2,5‐diene, Fc=ferrocenyl) to give high yields of the corresponding β‐alkynyl‐substituted carbonyl compounds with 95–98 % ee.     

Laboratory studies of the ·OH‐initiated photooxidation of ethyl‐n‐butyl ether and di‐n‐butyl ether

Oxygenated compounds such as ethers and alcohols are used as gasoline additives and industrial solvents. However, despite their widespread use, the atmospheric reaction mechanisms of some of these compounds are unknown. This study examines the ^·OH‐initiated gas‐phase removal mechanisms of ethyl‐n‐butyl ether (ENBE) and di‐n‐butyl ether (DNBE) utilizing gas chromatography–mass spectrometry techniques. The primary products and molar yields from the hydroxyl‐radical–initiated photooxidation of ENBE in the presence of nitric oxide were acetaldehyde (0.173 ± 0.012), ethyl formate (0.219 ± 0.033), butyraldehyde (0.076 ± 0.004), butyl formate (0.241 ± 0.009), butyl acetate (0.032 ± 0.001), and ethyl butyrate (0.0044 ± 0.0006). From the calculated molar yields, approximately 45.5% of the reacted carbon were recovered. The primary products and molar yields from the DNBE and hydroxyl radical reaction in the presence of nitric oxide were propionaldehyde (0.379 ± 0.022), butyraldehyde (0.119 ± 0.003), butyl formate (0.410 ± 0.009), and butyl butyrate (0.019 ± 0.001). Approximately 47.7% of the reacted DNBE were recovered. The chemical mechanisms are presented to explain the formation of these products. In addition, the importance of the isomerization and nitrate/nitrite formation pathways in the reactions of large ethers are discussed. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 328–341, 2001     

Substrate Range of the Titanium TADDOLate Catalyzed Asymmetric Fluorination of Activated Carbonyl Compounds

The substrate range of the [TiCl₂(TADDOLate)] (TADDOL=α,α,α′,α′‐tetraaryl‐1,3‐dioxolane‐4,5‐dimethanol)‐catalyzed asymmetric α‐fluorination of activated β‐carbonyl compounds has been investigated. Optimal conditions for catalysis are characterized by using 5 mol‐% of TiCl₂(naphthalen‐1‐yl)‐TADDOLate) as catalyst in a saturated (0.14 mol/l) MeCN solution of F‐TEDA (1‐(chloromethyl)‐4‐fluoro‐1,4‐diazoniabicyclo[2.2.2]octane bis‐[tetrafluoroborate]) at room temperature. A series of α‐methylated β‐keto esters (3‐oxobutanoates, 3‐oxopentanoates) with bulky benzyl ester groups (60–90% ee) or phenyl ester (67–88% ee) have been fluorinated readily, whereas α‐acyl lactones were also readily fluorinated, but gave lower inductions (13–46% ee). Double stereochemical differentiation in β‐keto esters with chiral ester groups raised the stereoselectivity to a diastereomeric ratio (dr) of up to 96.5 : 3.5. For the first time, β‐keto S‐thioesters were asymmetrically fluorinated (62–91.5% ee) and chlorinated (83% ee). Lower inductions were observed in fluorinations of 1,3‐diketones (up to 40% ee) and β‐keto amides (up to 59% ee). General strategies for preparing activated β‐carbonyl compounds as important model substrates for asymmetric catalytic α‐functionalizations are presented (>60 examples).     

Highly Active Copper‐Network Catalyst for the Direct Aldol Reaction

The development of a highly active solid‐phase catechol–copper network catalyst for direct aldol reaction is described. The catalyst was prepared from an alkyl‐chain‐linked bis(catechol) and a copper(II) complex. The direct aldol reaction between carbonyl compounds (aldehydes and ketones) and methyl isocyanoacetate was carried out using 0.1–1 mol % [Cu] catalyst to give the corresponding oxazolines at yields of up to 99 % and a trans/cis ratio of >99:1. The catalyst was reused with no loss of catalytic activity. A plausible reaction pathway is also described.     

Synthesis of chloro,fluoro, and nitro derivatives of 7‐amino‐5‐aryl‐6‐cyano‐5H‐pyrano pyrimidin‐2,4‐diones using organic catalysts and their antimicrobial and anticancer activities

Chloro, fluoro, and nitro derivatives of 7‐amino‐5‐aryl‐6‐cyano‐5H‐pyrano pyrimidin‐2,4‐diones were produced by reacting malononitrile, barbituric acid, and aromatic aldehydes together with a DABCO catalyst in an aqueous one‐pot reaction. This is the first report of these compounds being synthesized with DABCO as a catalyst, which produced the compounds in yields in excess of 90%. The 2,4‐difluoro derivative ( 11 ) was novel. The structures of the synthesized compounds were elucidated by means of ¹H, ¹³C, and 2D NMR spectroscopy. Compound 2 (2‐Cl derivative) had MBC values of <200μM against both Staphylococcus aureus and MRSA, and the 2‐nitro derivative 5 had an MBC of 191μM against the Gram–ve Escherichia coli. The synthesized compounds were also tested for their anticancer activity against a HeLa cell line, where all the compounds showed better activity (IC₅₀ values between 129μM and 340μM) than 5‐fluorouracil, a commonly known anticancer drug.     

Highly Stereoselective Conjugate Addition and α‐Alkynylation Reaction with Electron‐Deficient Alkynes Catalyzed by Chiral Scandium(III) Complexes

The highly Z‐selective asymmetric conjugate addition of 3‐substituted oxindoles to alkynyl carbonyl compounds has been developed by using scandium complexes of chiral N,N′‐dioxides under mild conditions. The thermodynamically unstable Z‐olefin derivatives were obtained in excellent yields and high enantiomeric and geometric control. The catalyst was also found to be effective in the asymmetric acetylenic substitution reaction of 3‐substituted oxindoles, giving excellent enantioselectivities.     

Half‐sandwich ruthenium‐based versatile catalyst for both alcohol oxidation and catalytic hydrogenation of carbonyl compounds in aqueous media

A series of half‐sandwich ruthenium‐based catalysts for both alcohol oxidation and carbonyl compounds hydrogenation have been synthesized through metal‐induced C–H bond activation based on benzothiazole ligands. The neutral ruthenium complexes 1 – 4 were fully characterized by UV–vis, NMR, IR, and elemental analysis. Molecular structures of complexes 1 and 3 were further confirmed by X‐ray diffraction analysis. All complexes exhibited high activity for the catalytic oxidation of a variety of alcohols with ^tBuOOH as oxidants to give carbonyl compounds with high yields in water. Moreover, these half‐sandwich complexes also showed high efficiency for the catalytic hydrogenation of carbonyl compounds in a methanol–water mixture. The catalyst could be reused for at least five cycles without any loss of activity. The catalytic system also worked well for various kinds of substrates with either electron‐donating or electron‐withdrawing groups.     

Synthesis of Quinolines via a Metal‐Catalyzed Dehydrogenative N‐Heterocyclization

Efficient ruthenium‐, rhodium‐, palladium‐, copper‐ and iridium‐catalysed methodologies have been recently developed for the synthesis of quinolines by the reaction of 2‐aminobenzyl alcohols with carbonyl compounds (aldehydes and ketones) or the related alcohols. The reaction is assumed to proceed via a sequence involving initial metal‐catalysed oxidation of 2‐aminobenzyl alcohols to the related 2‐aminobenzaldehydes, followed by cross aldol reaction with a carbonyl compound under basic conditions to afford α,β‐unsaturated carbonyl compounds. These aldehydes or ketones can be also generated in situ via dehydrogenation of the related primary and secondary alcohols. In the final step cyclodehydration of the α,β‐unsaturated carbonyl compound intermediates gives quinolines. Good yields of quinolines were also obtained by reacting 2‐nitrobenzyl alcohols and secondary alcohols in the presence of a ruthenium catalyst. Finally, aniline derivatives afforded also a useful access to quinolines by the reaction with 1,3‐propanediol or 3‐amino‐1‐propanol, or in a three‐component reaction with benzyl alcohol and aliphatic alcohols.     

A Manganese Pre‐Catalyst: Mild Reduction of Amides,Ketones, Aldehydes,and Esters

A new (N ‐phosphinoamidinate)manganese complex is shown to be a useful pre‐catalyst for the hydrosilative reduction of carbonyl compounds, and in most cases at room temperature. The Mn‐catalyzed reduction of tertiary amides to tertiary amines, with a useful scope, is demonstrated for the first time by use of this catalyst, and is competitive with the most effective transition‐metal catalysts known for such transformations. Ketones, aldehydes, and esters were also successfully reduced under mild conditions by using this new Mn catalyst.     

Various silicon‐containing polymers with Si(H)?CC units

Nine new kinds of thermosetting polymers with the Si(H)? C?C unit were synthesized by dehydrogenative polycondensation reactions between hydrosilanes and diethynyl compounds in the presence of a magnesia catalyst. Phenylsilane, silane, vinylsilane, and n‐octylsilane were used as the hydrosilanes, and 1,3‐diethynylbenzene, 1,4‐diethynylbenzene, 4,4′‐diethynyldiphenyl ether, and 1,3‐diethynyl‐1,1,3,3‐tetramethyldisiloxane were used as the diethynyl compounds. All the polymers were thermosetting, highly heat‐resistant, easily soluble in a solvent, and moldable. In particular, ? Si(R)H? C?C? C₆H₄? C?C? (R = H or CH?CH₂) showed high thermal stability; the temperature of 5% weight loss was greater than 800 °C, and the residue at 1000 °C was over 90%. The thermal stabilities of the polymers were attributed to the crosslinking reaction of the Si? H and C?C bonds. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2658–2669, 2001     

Phenylsulfonic Acid Functionalized Mesoporous Silica Catalyzed Transetherification of Alcohols with Dimethoxymethane

Phenylsulfonic acid functionalized mesoporous silica was synthesized by condensation of tetraethylorthosilicate with phenyltrimethoxysilane, and then sulfonation using 30% fuming sulfuric acid. The material was characterized using FT‐IR, DSC, XPS, TEM and N2 adsorption/desorption measurements. DSC revealed that sulfonic acid group of the catalyst was decomposed at 354.8°C, indicating that the catalyst exhibited high thermal stability. XPS showed that there existed three kinds of different silicon species on surface of the catalyst. The catalytic performance of the catalyst was evaluated using transetherification of alcohols with dimethoxymethane. It was found that among primary alcohols, the selectivities of the two long‐chain alcohols for n‐dedocanol and n‐tetradecyl alcohol were higher than 97.0% at the conversions of 43.6% and 65.3%, respectively, while the selectivities of the short‐chain alcohols except for n‐hexanol were less than 90.0% at the conversions of over 80.0%. Due to steric barrier, the secondary alcohols such as iso‐butanol and cyclohexanol afforded conversions of 79.4% and 60.5%, and the selectivities of the two alcohols were more than 90.0%. The sequence in conversion of the substituted phenols is as follows: p‐nitrophenol>p‐fluorophenol≥p‐bromophenol>p‐cresol>m‐cresol.     

Catalyst‐free one‐pot regioselective synthesis of benzo[d]imidazo[2,1‐b]thiazoles by heating or grinding

Eco‐friendly, efficient, and simple one‐pot catalyst‐free new procedures have been reported for the synthesis of benzo[d]imidazo[2,1‐b]thiazoles by condensation of phenylglyoxal, cyclic enolizable carbonyl compounds, and 2‐aminobenzothiazole at 80°C or by grinding the components at room temperature in glycerol. Cyclic enolizable carbonyl compounds employed in the protocol include dimedone, cyclohexa‐1,3‐dione, cyclopenta‐1,3‐dione, 5‐methylcyclohexa‐1,3‐dione, and 4‐hydroxy‐6‐methyl‐2‐pyrone. All the reactions were complete in ~30 min. The structures of all the products were confirmed by spectral data. The structures of compounds IVl and IVe have also been confirmed by X‐ray crystallographic studies. This protocol offers advantages such as short reaction time, easy workup, high yields and an environmentally benign methodology.     

A Manganese Pre‐Catalyst: Mild Reduction of Amides,Ketones, Aldehydes,and Esters

A new (N ‐phosphinoamidinate)manganese complex is shown to be a useful pre‐catalyst for the hydrosilative reduction of carbonyl compounds, and in most cases at room temperature. The Mn‐catalyzed reduction of tertiary amides to tertiary amines, with a useful scope, is demonstrated for the first time by use of this catalyst, and is competitive with the most effective transition‐metal catalysts known for such transformations. Ketones, aldehydes, and esters were also successfully reduced under mild conditions by using this new Mn catalyst.     

Determination of carbonyl compounds in the atmosphere by DNPH derivatization and LC-ESI-MS/MS detection

A method of determination of 32 carbonyl compounds by high performance liquid chromatography (HPLC) and electrospray ionization (ESI) tandem mass spectrometry (MS/MS) after derivatization with 2,4-dinitrophenylhydrazine (DNPH) was developed and successfully applied to the atmosphere sample of a residential area of Liwan District (S1) and a research institute of Tianhe District (S2) in Guangzhou, China. Some operation conditions of ESI-MS/MS in the negative ion mode including selection of parent and daughter ions, declustering potential (DP), entrance potential (EP), collision energy (CE), collision cell exit potential (CXP) and effect of buffer in ESI-MS/MS process were optimized. The regression coefficient of the calibration curves (R²), recovery, reproducibility (R.S.D., n = 5) and limit of detection (LOD) were in the range of 0.9938-0.9999, 90-104%, 1.7-11% and 0.4-9.4 ng/m³, respectively. Among most of the samples, acetone was the most abundant carbonyl in two sampling sites and formaldehyde, acetaldehyde and butyraldehyde/2-butanone were also abundant carbonyls. In contrast to LC-UV method, the LOD, the separation of some co-eluting compounds and the precision (mainly to higher molecular weight carbonyls) are all improved by LC-ESI-MS/MS.     

Kinetics of OH and Cl reactions with a series of aldehydes

The rate constants for the reactions of the OH radicals with a series of aldehydes have been measured in the temperature range 243–372 K, using the pulsed laser photolysis‐pulsed laser induced fluorescence method. The obtained data for propanaldehyde, iso‐butyraldehyde, tert‐butyraldehyde, and n‐pentaldehyde were as follows (in cm³ molecule⁻¹ s⁻¹): (a) in the Arrhenius form: (5.3 ± 0.5) × 10⁻¹² exp[(405 ± 30)/T], (7.3 ± 1.9) × 10⁻¹² exp[(390 ± 78)/T], (4.7 ± 0.8) × 10⁻¹² exp[(564 ± 52)/T], and (9.9 ± 1.9) × 10⁻¹² exp[(306 ± 56)/T]; (b) at 298 K: (2.0 ± 0.3) × 10⁻¹¹, (2.6 ± 0.4) × 10⁻¹¹, (2.7 ± 0.4) × 10⁻¹¹, and (2.8 ± 0.2) × 10⁻¹¹, respectively. In addition, using the relative rate method and alkanes as the reference compounds, the room‐temperature rate constants have been measured for the reactions of chlorine atoms with propanaldehyde, iso‐butyraldehyde, tert‐butyraldehyde, n‐pentaldehyde, acrolein, and crotonaldehyde. The obtained values were (in cm³ molecule⁻¹ s⁻¹): (1.4 ± 0.3) × 10⁻¹⁰, (1.7 ± 0.3)10⁻¹⁰, (1.6 ± 0.3) × 10⁻¹⁰, (2.6 ± 0.3) × 10⁻¹⁰, (2.2 ± 0.3) × 10⁻¹⁰, and (2.6 ± 0.3) × 10⁻¹⁰, respectively. The results are presented and discussed in terms of structure‐reactivity relationships and atmospheric importance. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 676–685, 2000