Mild and Efficient Catalytic Protocol for Tetrahydropyranylation of Alcohols Using Acidic Keggin and Wells‐Dawson Structures

A simple, mild and effective procedure is reported to the generation of 2-tetrahydropyranyl acetals from alcohols. Keggin and Wells-Dawson heteropolyoxometalates were used as catalysts at ambient temperature in acetone as solvent with good yields and high selectivities in a short reaction time. Different reaction parameters affecting efficiency of the protocol were also studied. The use of these acid catalysts allows replacing the usual soluble inorganic acids, contributing to waste reduction.     

CONVERSION OF ACETALS AND KETALS TO CARBONYL COMPOUNDS PROMOTED BY ZrCl_4-NaBH_4

In our study on the chemistry of ZrCl_4-NaBH_4,we have found that aldehydes and ketonescan be regenerated from acetals and ketals at 30℃ in Et_2O in high yield The reaction mechanismwas discussed.     

DEPROTECTION OF ACETALS AND KETALS WITH CpTiCl_3-KI

When the mixture of CpTiCl_3-KI is used, many acetals and ketals, which are difficuitly deprotected with CpTiCl_3 alone, can be easily converted to the corresponding carbonyl compounds in high yield at 30℃ in Et_2O.     

Al2O3 Effect on the Catalytic Activity of Cu-ZnO-Al2O3-SiO2 Catalysts for Dimethyl Ether Synthesis from CO2 Hydrogenation

The effect of Al2O3 on the Cu-ZnO-Al2O3-SiO2 catalysts prepared by a pseudo sol-gel method has been investigated and these catalysts were characterized by XRD, H2-TPR, XPS, NH3-TPD and CO2- TPD techniques. As revealed by XRD and H2-TPR, the added alumina produces high dispersion of CuO and makes the reduction of CuO difficult. XPS analysis detects a remarkably high Al^3＋ enrichment at the surface of calcined samples, along with a decrease of Eb of Cu 2p3/2, which confirms the Cu-Al interaction. Another important role of Al203 would be to incorporate into the SiO2 structure to form the acid-base sites for ether formation. The reaction results shows that the addition of Al2O3 exhibits a promoting effect on the CO2 conversion only when its content is below 1.4%, and an optimal DME selectivity is obtained when 4.0%Al2O3 is added, indicating a better ＇synergistic effect＇ is present between the methanol forming component and the acidic component in bifunctional catalysts. Possible relationship between the catalytic activity and the Cu-Al interaction as well as the surface acidity is discussed.     

Room-Temperature Bismuth-Catalyzed Bis-arylation of Carbonyl Compounds with Aryl Ethers and Phenols

Using Bi2（SO4）3 as the catalyst and TMSCl as the additive, a wide variety of aldehydes, ketones, and acetals were smoothly condensed with aryl ethers at room temperature to provide the corresponding diarylmethanes and triarylmethanes selectively in good to excellent yields.     

Studies on the Structure and Properties of Multiphase Al_2O_3 Abrasion-resistant Ceramics

1 INTRODUCTION Due to its high intensity, high hardness, high tem- perature resistance, corrosion resistance and abra- sion resistance, Al2O3 abrasion-resistant ceramic is widely applied in many fields, such as metallurgy, minerals, electric power, building materials and che- mical engineering as grinding medium in the ball grinder. The properties of Al2O3 ceramic are positi- vely correlated to its purity: the higher the purity is, the better the properties of the product are, but cor- r…     

THE HISTORICAL CLIMATIC RECORDS IN ICE CORES FROM THE SURFACE LAYER OF WILKES LAND, ANTARCTICA

The information preserved in the surface layer of the Antarctic ice sheet is so abundant and detailed that in the areas with a high accumulation rate the annual climatic changes in the past can be distinguished. After conducting an investigation into the stratigraphical features of ice cores from two typical shallow boreholes in the Wilkes Land, one inland and another near the margin, analyzing δ(~18)O and the gross β radioactivity in the cores, as well as anslyzing the power spectra of δ~(18)O, the authors present some important assessments on the climatic information in the past several decades therein such as the annual mean temperature and precipitation, and suggest that there is a period of 11 years with which the climate changes cyclically in East Antactica. Such a studying method will be of value in both theory and practice to the inland Antarctica, where direct meteorological observation is deficient.     

GaI_3 Catalyzed Tetrahydropyranylation of Alcohols and Phenols

Introduction Tetrahydropyranylation is an efficient method for the protection of hydroxyl group in organic synthesis due to the stability of the tetrahydropyranyl acetals because they are stable under a variety of reaction conditions such as alkaline media, Grignard reagents, lithium al-kyls, metal hydrides, oxidative reagents, alkylating and acylating reagents.1 Tetrahydropyranyl acetals are gen-erated by a nucleophilic addition of alcohols or phenols to 3,4-dihydro-2H-pyran (DHP). A variet…     

A New Solvent—free Synthesis of α，α‘’—Dlbenzylidenecycloalkanones from Acetals with Cycloalkanones under Microwave Irradiation

A new rapid synthetic method is described for synthesis of α，α‘‘-dilbenzylidene-cycloalkanones by the reaction of acetals and cycloalkanones without solvent using BF3-Et2O as catalyst under microwave irradiation.     

Catalyst-controlled regiodivergent 1,2-difunctionalization of alkenes with two carbon-based electrophiles

Regiodivergent catalysis provides an efficient strategic approach for the construction of architecturally different molecules from the same starting materials. In this field, the intermolecular regiodivergent 1,2-difunctionalization of alkenes with two electrophiles is still a challenging task. A ligand-controlled, nickel-catalyzed regiodivergent dicarbofunctionalization of alkenes using both aryl/vinyl halides and acetals as electrophiles under mild reductive reaction conditions has been accomplished. This study provides a general approach to accessing both β-methoxyl esters and γ-methoxyl esters from readily available acrylates,aryl halides and acetals. Experimental mechanistic evidence supports that the difference in regioselective outcomes is attributed to the ligand tuning the reactivity of the nickel catalyst, which results in different catalytic cycles operating for these two reaction conditions.     

Methyl {1‐[2,3‐O‐iso­propyl­idene‐5‐O‐(4‐nitro­benzoyl)‐α‐d‐ribo­furan­osyl]‐4‐methoxy­carbonyl‐1H‐1,2,3‐triazol‐5‐yl}acetate

In the title compound, C₂₂H₂₄N₄O₁₁, the N‐glycosidic torsion angles O′—C′—N—C and O′—C′—N—N are ?34.1 (6) and 148.8 (3)°, respectively. The mol­ecule displays an α‐d configuration with the ribo­furan­ose moiety in an O′‐exo–C′‐endo pucker. There are only weak C—H?O and C—H?N intra‐ and intermolecular interactions.     

Synthesis of spiro[indoline‐3,3′‐pyrrolizines] by 1,3‐dipolar reactions between isatins,l‐proline and electron‐deficient alkenes

Two spiro[indoline‐3,3′‐pyrrolizine] derivatives have been synthesized in good yield with high regio‐ and stereospecificity using one‐pot reactions between readily available starting materials, namely l ‐proline, substituted 1H‐indole‐2,3‐diones and electron‐deficient alkenes. The products have been fully characterized by elemental analysis, IR and NMR spectroscopy, mass spectrometry and crystal structure analysis. In (1′RS ,2′RS ,3SR ,7a′SR )‐2′‐benzoyl‐1‐hexyl‐2‐oxo‐1′,2′,5′,6′,7′,7a′‐hexahydrospiro[indoline‐3,3′‐pyrrolizine]‐1′‐carboxylic acid, C₂₈H₃₂N₂O₄, (I), the unsubstituted pyrrole ring and the reduced spiro‐fused pyrrole ring adopt half‐chair and envelope conformations, respectively, while in (1′RS ,2′RS ,3SR ,7a′SR )‐1′,2′‐bis(4‐chlorobenzoyl)‐5,7‐dichloro‐2‐oxo‐1′,2′,5′,6′,7′,7a′‐hexahydrospiro[indoline‐3,3′‐pyrrolizine], which crystallizes as a partial dichloromethane solvate, C₂₈H₂₀Cl₄N₂O₃·0.981CH₂Cl₂, (II), where the solvent component is disordered over three sets of atomic sites, these two rings adopt envelope and half‐chair conformations, respectively. Molecules of (I) are linked by an O—H…·O hydrogen bond to form cyclic R ₆⁶(48) hexamers of (S ₆) symmetry, which are further linked by two C—H…O hydrogen bonds to form a three‐dimensional framework structure. In compound (II), inversion‐related pairs of N—H…O hydrogen bonds link the spiro[indoline‐3,3′‐pyrrolizine] molecules into simple R ₂²(8) dimers.     

Three different fluoro‐ or chloro‐substituted 1′‐deoxy‐1′‐phenyl‐β‐D‐ribofuranoses

Crystal structures are reported for three fluoro‐ or chloro‐substituted 1′‐deoxy‐1′‐phenyl‐β‐D‐ribofuranoses, namely 1′‐deoxy‐1′‐(2,4,5‐trifluorophenyl)‐β‐D‐ribofuranose, C₁₁H₁₁F₃O₄, (I), 1′‐deoxy‐1′‐(2,4,6‐trifluorophenyl)‐β‐D‐ribofuranose, C₁₁H₁₁F₃O₄, (II), and 1′‐(4‐chlorophenyl)‐1′‐deoxy‐β‐D‐ribofuranose, C₁₁H₁₃ClO₄, (III). The five‐membered furanose ring of the three compounds has a conformation between a C2′‐endo,C3′‐exo twist and a C2′‐endo envelope. The ribofuranose groups of (I) and (III) are connected by intermolecular O—H...O hydrogen bonds to six symmetry‐related molecules to form double layers, while the ribofuranose group of (II) is connected by O—H...O hydrogen bonds to four symmetry‐related molecules to form single layers. The O...O contact distance of the O—H...O hydrogen bonds ranges from 2.7172 (15) to 2.8895 (19) Å. Neighbouring double layers of (I) are connected by a very weak intermolecular C—F...π contact. The layers of (II) are connected by one C—H...O and two C—H...F contacts, while the double layers of (III) are connected by a C—H...Cl contact. The conformations of the molecules are compared with those of seven related molecules. The orientation of the benzene ring is coplanar with the H—C1′ bond or bisecting the H—C1′—C2′ angle, or intermediate between these positions. The orientation of the benzene ring is independent of the substitution pattern of the ring and depends mainly on crystal‐packing effects.     

Ethyl 3‐(2′‐deoxyuridin‐5‐yl)‐3‐hydroxy‐2‐iodopropanoate,a ­nucleoside analogue

In the title compound, C₁₄H₁₉IN₂O₈, an almost planar heterocyclic base is oriented anti with respect to the puckered sugar moiety. The sugar pucker is C2′‐endo/C3′‐exo, the N‐glycosidic torsion angle is 166.4 (4)° and the conformation of O5′ is +sc. The mol­ecules are linked by hydrogen bonds of the types N—H?O and O—H?O.     

A complex containing both five‐ and six‐coordinate [bis(5‐bromosalicyli­dene)benzene‐1,2‐diimine]chloro­iron(III)

The title compound, aqua­chloro{4,4′‐di­bromo‐2,2′‐[o‐phenylenebis­(nitrilo­methyl­idyne)]­diphenolato‐O,N,N′,O′}iron(III)–chloro{4,4′‐di­bromo‐2,2′‐[o‐phenyl­enebis­(nitrilomethyli‐dyne)]diphenolato‐O,N,N′,O′}iron(III)–di­methyl­form­amide (1/1/1), [FeCl(C₂₀H₁₂Br₂N₂O₂)][FeCl(C₂₀H₁₂Br₂N₂O₂)(H₂O)]·C₃H₇NO, contains one independent five‐coordinate [FeCl(C₂₀H₁₂Br₂N₂O₂)] monomer, one six‐coordinate [FeCl(C₂₀H₁₂Br₂N₂O₂)(H₂O)] monomer and a non‐coordinating di­methyl­form­amide solvent mol­ecule in the asymmetric unit. In the five‐coordinate monomer, the Fe atom shows distorted square‐pyramidal geometry, with the N and O atoms of the ligand at the base and the Cl atom at the apex of the pyramid. In the six‐coordinate monomer, the Fe atom is in a distorted octahedral geometry and coordinated by the donor atoms of the tetrafunctional ligand in the horizontal plane, and the coordination sphere is completed by the O atom of the water mol­ecule and the Cl atom at the axial positions. The title compound contains intermolecular O—H?O hydrogen bonds. Apart from these hydrogen bonds, there are also intermolecular C—H?Cl and C—H?O contacts.     

A new two‐dimensional cadmium coordination polymer with 1H‐imidazole‐4‐carboxylate and oxalate

The title compound, poly[aqua(μ₂‐1H‐imidazole‐4‐carboxylato‐κ³N³,O:O′)hemi(μ₂‐oxalato‐κ⁴O¹,O²:O^1′,O^2′)cadmium(II)], [Cd(C₄H₃N₂O₂)(C₂O₄)_0.5(H₂O)]_n, exhibits a two‐dimensional network. The Cd^II cation is coordinated to one N atom and two carboxylate O atoms from two 1H‐imidazole‐4‐carboxylate (Himc) ligands, two carboxylate O atoms from the bridging oxalate anion and one ligated water molecule; these six donor atoms form a distorted octahedral configuration. The oxalate anion lies on a centre of inversion. The Himc ligands connect the Cd^II cations to form –Cd–Himc–Cd–Himc–Cd– zigzag chains, with a Cd...Cd separation of 5.8206 (6) Å along the b direction, which are further linked by tetradentate oxalate anions to generate a two‐dimensional herringbone architecture in the ab plane. These layers are extended to form a three‐dimensional supramolecular framework via O—H...O and N—H...O hydrogen bonds and π–π stacking interactions. The solid‐state photoluminscent behaviour of the title compound has been investigated at room temperature.     

catena‐Poly[[bis[aqua­(1,10‐phenanthroline)lead(II)]‐di‐μ3‐5‐carboxy‐3‐sulfonatobenzoato] dihydrate]

In the centrosymmetric title polymer, catena‐poly[[bis[aqua­(1,10‐phenanthroline‐κ²N,N′)lead(II)]‐di‐μ₃‐5‐carboxy‐3‐sulfonatobenzoato‐1:2:1′κ⁴O³:O¹,O^1′:O¹;2′:1:2κ⁴O¹:O¹,O^1′:O³] dihydrate], {[Pb(C₈H₄O₇S)(C₁₂H₈N₂)(H₂O)]·H₂O}_n, each seven‐coordinate lead(II) ion is bound by five O atoms from one water molecule and three 5‐sulfoisophthalate (sip) anions, and by two N atoms from a 1,10‐phenanthroline (phen) ligand. The sip sulfonate group is monodentate. One O atom of the sip carboxyl­ate group is chelated to one Pb²⁺ cation, with the other also bridging an adjacent Pb²⁺ cation. The carboxyl group is uncoordinated. This unusual coordination results in a chain structure along the b axis, which is linked by strong intermolecular hydrogen bonds into a three‐dimensional network.     

Catalytic,Cascade Ring‐Opening Benzannulations of 2,3‐Dihydrofuran O,O‐ and N,O‐Acetals

An Al(OTf)₃‐catalyzed intramolecular cascade ring‐opening benzannulation of 2,3‐dihydrofuran O,O‐ and N,O‐acetals is described. The cascade sequence involves the dihydrofuran ring‐opening by acetal hydrolysis, an intramolecular Prins‐type cyclization, and aromatization to generate an array of benzo‐fused (hetero)aromatic systems in up to 95 % yield. This method represents the first example of dihydrofuran acetal usage in benzannulation reactions. The approach provides excellent regiocontrol based on the choice of alkenes used to form the requisite dihydrofuran acetals.     

A new two‐dimensional managnese(II) coordination polymer constructed by 2,2′‐(1,2‐phenylene)bis(1H‐imidazole‐4,5‐dicarboxylate)

In recent years, N‐heterocyclic carboxylate ligands have attracted much interest in the preparation of new coordination polymers since they contain N‐atom donors, as well as O‐atom donors, and have a rich variety of coordination modes which can lead to polymers with intriguing structures and interesting properties. A new two‐dimensional coordination polymer, namely poly[[μ₃‐2,2′‐(1,2‐phenylene)bis(4‐carboxy‐1H‐imidazole‐5‐carboxylato)‐κ⁶O⁴,N³,N^3′,O^4′:O⁵:O^5′]manganese(II)], [Mn(C₁₆H₈N₄O₈)]_n or [Mn(H₄Phbidc)]_n, has been synthesized by the reaction of Mn(OAc)₂·4H₂O (OAc is acetate) with 2,2′‐(1,2‐phenylene)bis(1H‐imidazole‐4,5‐dicarboxylic acid) (H₆Phbidc) under solvothermal conditions. In the polymer, each Mn^II ion is six‐coordinated by two N atoms from one H₄Phbidc²⁻ ligand and by four O atoms from three H₄Phbidc²⁻ ligands, forming a significantly distorted octahedral MnN₂O₄ coordination geometry. The Mn^II ions are linked by hexadentate H₄Phbidc²⁻ ligands, leading to a two‐dimensional structure parallel to the ac plane. In the crystal, adjacent layers are further connected by N—H…O hydrogen bonds, forming a three‐dimensional structure in the solid state.     

7‐De­aza‐2′‐deoxy‐7‐propynyl­guanosine

The title compound, C₁₄H₁₆N₄O₄, adopts the anti conformation at the gly­cosylic bond [χ−117.1 (5)°]. The sugar pucker of the 2′‐deoxy­ribo­furan­osyl moiety is C2′‐endo–C3′‐exo, ²T₃ (S‐type). The orientation of the exocyclic C4′—C5′ bond is +sc (gauche). The propynyl group is linear and coplanar with the nucleobase moiety. The structure of the compound is stabilized by several hydrogen bonds (N—H⋯O and O—H⋯O), leading to the formation of a multi‐layered network. The nucleobases, as well as the propynyl groups, are stacked. This stacking might cause the extraordinary stability of DNA duplexes containing this compound.