Facile and Rapid Solid Phase Synthesis of Monodisperse Oligo（1, 4-phenyleneethynylene）s

An extremely facile and rapid solid phase route free of column chromatographic purification for the synthesis of the soluble monodisperse oligo(l, 4-phenyleneethynylene)s up to-60A was presented.     

Solid Phase Synthesis of 4（1H）Quinolones from Resin—Bound Cyclic Malonic Ester

The solid phase synthesis of 4(1H) quinolones has been reported.     

Solid-Phase Stereoselective Synthesis of （E）-1, 2-Disubstituted Ethenes from Polymer-Sopported α-Selenoaldehydes

Reaction of polymer-supported α-selenoaldehydes with Grignard reagents afforded polymer-bound β-hydroxyalkyl selenides, which treated with thionyl chloride and triethylamine leading to (E)-1, 2-disubstituted ethenes in good yield.     

Stereoselective Synthesis of（E）—and（Z）—1,2—Disubstituted Ethene from Polymer—Supported vinylic Selenide

This letter describes a method for the stereoselective synthesis of polymer-supported vinylic selenides and their applications to synthesis of(E)-and(Z)-1,2-disubstituted ethenes on solid-phase by the couplig reaction with Grignard reagents under the catalysis of NiCL2(PPh3)2.     

Extraction of Cesium from the Irradiated Nuclear Waste by 4（5）,4＇（5＇）-Bis[1-hydroxyalkylbenzo]-21-crown-7

4(5),4‘(5‘)-Bis[1-hydroxyalkylbenzo]-21-crown-7 (A-C) have been synthesized by two-step reactions from dibenzo-21-crown-7 (DB21C7). Extraction of cesium cation from nitric acid solutions by A-C has been investigated in nitromethane. Under the conditions of various concentration of HNO3 or NaNO3, the extractabilities of A and B were superior to that of DB21C7.     

Synthesis and Crystal Structure of Di-μ1,1-azido-bis（（azido）[N-ethyl-N＇-（1-pyridin-2-ylmethylidene）ethane-1,2-diamino]cadmium（Ⅱ））

The dinuclear Schiff base cadmium（Ⅱ） complex [Cd2（C10H15N3）2（N3）2 （μ1,1-N3）2] was prepared and characterized by elemental analysis, IR spectrum, and single-crystal X-ray dif- fraction. The crystal belongs to the monoclinic system, space group P21/n with a = 10.819（2）, b = 11.058（2）, c = 12.766（3）A, β = 102.456（2）°, V = 1491.3（7）A^3, Z = 2, Dc = 1.665 g/cm^3, Mr = 747.42, λ（MoKα） = 0.71073 （A）, μ = 1.470 mm^-1, F（000） = 744, R = 0.0307 and wR = 0.0584. A total of 3420 unique reflections were collected, of which 2575 with Ⅰ 〉 2σ（Ⅰ） were observed. There is a crystallographic inversion centre at the midpoint of the two metal atoms in the complex. Each CdⅡ atom in the complex is in a distorted octahedral coordination. The molecules in the crystal are linked through the intermolecular hydrogen bonds of N-H…N and C-H…N, forming a three- dimensional network.     

A New Approach to the Extraction of Prostaglandins 6-Keto-F1α, F2α, E2, and E1 from Gastric Mucosa with Quantitative Analysis by Reverse Phase Liquid Chromatography

Abstract

A simple and reliable method is presented for the extraction of Prostaglandins 6-Keto-F₁ α, F₂ α, E₂ and E₁ from gastric mucosa with quantitation by Reverse Phase Liquid Chromatography. Extraction is accomplished without the need for the harsh chemicals normally associated with tissue extraction. The efficiency of prostaglandin extraction is demonstrated utilizing radiolabeled prostaglandins. Quantitation of these compounds is compared to measurement by radioimmunoasay.     

Synthesis, Crystal Structure, and Cytotoxic Property of Di（μ1”,1”-azide）bis（4-nitro-2-（3＇-dimethylaminon-propylimino）methylenephenolate）dizinc（Ⅱ）

The title azide-bridged dinuclear Schiff base zinc(Ⅱ) complex [Zn2(C12H16N3O3)2-(μ1,1-N3)2] was prepared and characterized by elemental analysis, IR spectrum, and single-crystal X-ray diffraction. The crystal belongs to the monoclinic system, space group F21/n with a = 8.736(2), b = 14.850(3), c = 11.775(2) (A), β = 102.42(3)°, V= 1491.8(5) (A)3, Z= 2, Dc = 1.593 g/cm3, Mr = 715.36, λ(MoKα) = 0.71073 (A), μ = 1.669 mm-1, F(000) = 736, the final R = 0.0338 and wR = 0.0789. A total of 3411 unique reflections were collected, of which 2777 with Ⅰ＞2σ(Ⅰ) were observed. The molecule of the complex is located on a crystallographic inversion centre. Each Zn atom in the complex is five-coordinated by one Schiff base ligand and two bridging azide groups, forming a trigonal bipyramidal configuration. The Zn…Zn distance is 3.328(2) (A). In the crystal structure, molecules are linked through intermolecular C-H…N hydrogen bonds, forming layers parallel to the bc plane. The complex shows low cytotoxic property to both normal and carcinoma cells.     

A Novel Al(III)‐Selective Electrochemical Sensor Based on N,N′‐Bis(salicylidene)‐1,2‐phenylenediamine Complexes

A polyvinylchloride membrane sensor based on N,N′‐bis(salecylidene)‐1,2‐phenylenediamine (salophen) as membrane carrier was prepared and investigated as a Al³⁺‐selective electrode. The sensor exhibits a Nernstian response toward Al(III) over a wide concentration range (8.0×10^?7–3.0×10^?2 M), with a detection limit of 6.0×10^?7 M. The potentiometric response of the sensor is independent of the pH of the test solution in the pH range 3.2–4.5. The electrode possesses advantages of very fast response and high selectivity for Al³⁺ in comparison with alkali, alkaline earth and some heavy metal ions. The sensor was used as an indicator electrode, in the potentiometric titration of aluminum ion and in determination of Al³⁺ contents in drug, water and waste water samples.     

Solid Phase Extraction of Thallium(III) on Micro Crystalline Naphthalene Modified with N,N’-Bis(3-methylsalicylidene)- ortho-phenylenediamine and Determination by Spectrophotometry

A novel, simple, sensitive and effective method has been developed for preconcentration of thallium on N,N’-bis(3-methylsalicylidene)-ortho-phenylenediamine (MSOPD) adsorbent in a pH range 5.0—10.0, prior to its spectrophotometric determination, based on the oxidation of bromopyrogallol red at λ＝520 nm. This method makes it possible to quantitize thallium in a range of 3.6×10－9 to 2.0×10－5 mol/L, with a detection limit (S/N＝3) of 1.42×10－9 mol/L. This procedure has been successfully applied to determine the ultra trace levels of thallium in the environmental samples, free from the interference of some diverse ions. The precision, expressed as relative standard deviation of three measurements, is better than 2.9%.     

Highly stable electrochromic polyamides based on N,N‐bis(4‐aminophenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine

A new triphenylamine‐containing aromatic diamine monomer, N,N‐bis(4‐aminophenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine, was synthesized by an established synthetic procedure from readily available reagents. A novel family of electroactive polyamides with di‐tert‐butyl‐substituted N,N,N′,N′‐tetraphenyl‐1,4‐phenylenediamine units were prepared via the phosphorylation polyamidation reactions of the newly synthesized diamine monomer with various aromatic or aliphatic dicarboxylic acids. All the polymers were amorphous with good solubility in many organic solvents, such as N‐methyl‐2‐pyrrolidinone (NMP) and N,N‐dimethylacetamide, and could be solution‐cast into tough and flexible polymer films. The polyamides derived from aromatic dicarboxylic acids had useful levels of thermal stability, with glass‐transition temperatures of 269–296 °C, 10% weight‐loss temperatures in excess of 544 °C, and char yields at 800 °C in nitrogen higher than 62%. The dilute solutions of these polyamides in NMP exhibited strong absorption bands centered at 316–342 nm and photoluminescence maxima around 362–465 nm in the violet‐blue region. The polyamides derived from aliphatic dicarboxylic acids were optically transparent in the visible region and fluoresced with a higher quantum yield compared with those derived from aromatic dicarboxylic acids. The hole‐transporting and electrochromic properties were examined by electrochemical and spectro‐electrochemical methods. Cyclic voltammograms of the polyamide films cast onto an indium‐tin oxide‐coated glass substrate exhibited two reversible oxidation redox couples at 0.57–0.60 V and 0.95–0.98 V versus Ag/AgCl in acetonitrile solution. The polyamide films revealed excellent elcterochemical and electrochromic stability, with a color change from a colorless or pale yellowish neutral form to green and blue oxidized forms at applied potentials ranging from 0.0 to 1.2 V. These anodically coloring polymeric materials showed interesting electrochromic properties, such as high coloration efficiency (CE = 216 cm²/C for the green coloring) and high contrast ratio of optical transmittance change (ΔT%) up to 64% at 424 nm and 59% at 983 nm for the green coloration, and 90% at 778 nm for the blue coloration. The electroactivity of the polymer remains intact even after cycling 500 times between its neutral and fully oxidized states. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2330–2343, 2009     

Transient Absorption Spectral characterization of Electron Transfer between Fullerenes（C60／C70）and N,N,N’，N’—Tetra（p—methylphenyl）—4,4’—diamino—1,1’—diphenyl Sulphide（TPDAS）

In search of new systems with a photoexcited redox pair which exhibits a strong and stable photoinduced absorption band to understand the photophyscial and photochemical properties of electron transfer between fullernes (C60/C70) and organic donor[N,N,N’，N’-tetra(p-methylphenyl)-4,4’-diamino-1,1’-diphenyl sulphide(TPDAS)],we studied characteristic absorption spectra in the near-IR region obtained from 532nm nanosecond laser flash photolysis of a mixture of the fullerenes (C60/C70) and TPDAS in polar solvents.When fullerenes (C60/C70)were photoexcithed,the rise of the radical anion of fullerenes (C60/C70)with the rapid decay of their excited triplet states were observed in benzonitrile.It can be deduced that the electron transfer reaction does take place from TPDAS to excithed triplet state of rullerens(C60/C70).The rate consants(ket)and quantum yiekls(φet) of this process have been also evaluated.     

Interaction of Bovine Serum Albumin with N‐(4‐Ethoxyphenyl)‐N′‐(4‐Antipyrinyl)Thiourea (EPAT) Using Spectroscopies

The interaction between N‐(4‐ethoxyphenyl)‐N′‐(4‐antipyrinyl)thiourea (EPAT) and bovine serum albumin (BSA) was studied by fluorescence spectroscopy in combination with UV absorption spectroscopy. The intrinsic fluorescence of bovine serum albumin was quenched by EPAT through a static quenching procedure. The binding constants of EPAT with BSA were estimated according to the fluorescence quenching results at different temperatures. The thermodynamic parameters: enthalpy change (ΔH) and entropy change (ΔS) were calculated to be ?10.69 kJ/mol and 42.64 J·mol^?1·K^?1 according to thermodynamic equations, respectively, and indicating that the binding force was suggested to be mainly a hydrophobic force. The effect of common ions on the binding constant was also investigated. A new fluorescence spectroscopy assay of the proteins was presented in this paper. The determination results of the proteins in bovine serum by means of this method were very close to those obtained using Coomassie Brilliant Blue G‐250 colorimetry.     

Novel Ytterbium(III) Selective Membrane Sensor Based on N‐(2‐Pyridyl)‐N′‐(2‐Methoxyphenyl)‐Thiourea as an Excellent Carrier and Its Application to Determination of Fluoride in Mouth Wash Preparation Samples

The construction, performance, and applications of a novel ytterbium(III) sensor based on N‐(2‐pyridyl)‐N′‐(2‐methoxyphenyl)‐thiourea (PMT), as an excellent carrier, in plasticized poly(vinyl chloride) PVC matrix, is described. The influences of membrane composition and pH on the potentiometric response of the sensor were investigated. The sensor exhibits a nice Nernstian response for Yb(III) ion over a wide concentration range of 4 decades of concentration (1.0×10^?6–1.0×10^?2 M), and a detection limit of 5.0×10^?7 M. The response time of the electrodes is between 8 and 10 s, depending on the concentration of ytterbium(III) ions. The proposed sensor can be used for about 8 weeks without any considerable divergence in potential. The sensor revealed very good selectivity for Yb(III) in the presence of several metal ions. The best performance was observed for the membrane containing; 30% PVC, 59% o‐nitrophenyloctyl ether (NPOE) as solvent mediator, 7% PMT, and 4% sodium tetraphenyl borate (NaTPB). It was successfully applied as indicator electrodes in the potentiometric titration of Yb(III) with EDTA and for the determination of fluoride ion in two mouth wash formulations. The proposed La(III) sensor was found to work well under laboratory conditions. It was also used as an indicator electrode in titration of a 1.0×10^?4 M of Yb(III) with a standard EDTA solution (1.0×10^?2 M). It was also used for determination of Yb(III) ion in Xenotime .     

Construction of a Highly Selective and Sensitive La(III) Sensor Based on N‐(2‐Pyridyl)‐N′‐(4‐methoxyphenyl)‐thiourea for Nano Level Monitoring of La(III) Ions

N‐(2‐Pyridyl)‐N′‐(4‐methoxyphenyl)‐thiourea (PMPT) was found to be a suitable neutral ion carrier for the construction of a highly selective and sensitive La(III) membrane sensor. Poly(vinyl chloride) (PVC) based membranes of PMPT with potassium tetrakis (p‐chlorophenyl) borate (KTpClPB) as an anionic excluder and oleic acid (OA), dibutyl phthalate (DBP), benzyl acetate (BA) and o‐nitrophenyloctyl ether (NPOE) as plasticizing solvent mediators were constructed and investigated as La(III) membrane sensors. A membrane composed of PMPT‐PVC‐KTpClPB‐BA with the ratio 8.0 : 35.0 : 3.0 : 54.0 works well over a very wide concentration range (4.0×10^?8 to 1.0×10^?1 M) with a Nernstian slope of 19.6±0.2 mV per decade of activity between pH values of 4.0 and 9.0. The detection limit of the sensor was calculated to be 2.0×10^?8 M (ca. 3.0 ppb). The sensor displays very good discrimination toward La(III) ions with regard to most common metal ions and lanthanide ions. The proposed sensor shows a short response time for whole concentration range (ca. 12 s). For evaluation of the analytical applicability of the La(III) sensor, it was successfully used as an indicator electrode for the titration of La(III) ions with EDTA. It was also applied to the determination of fluoride content of two mouth wash preparation samples and monitoring of La(III) ions in some binary and ternary mixtures.     

A three‐dimensional ZnII coordination framework: poly[[μ2‐(E)‐1,2‐bis(pyridin‐4‐yl)ethene][μ4‐(E)‐2,2′‐(diazene‐1,2‐diyl)dibenzoato][μ2‐(E)‐2,2′‐(diazene‐1,2‐diyl)dibenzoato]dizinc(II)]

In the title coordination polymer, [Zn₂(C₁₄H₈N₂O₄)₂(C₁₂H₁₀N₂)]_n, the asymmetric unit contains one Zn^II cation, two halves of 2,2′‐(diazene‐1,2‐diyl)dibenzoate anions (denoted L²⁻) and half of a 1,2‐bis(pyridin‐4‐yl)ethene ligand (denoted bpe). The three ligands lie across crystallographic inversion centres. Each Zn^II centre is four‐coordinated by three O atoms of bridging carboxylate groups from three L²⁻ ligands and by one N atom from a bpe ligand, forming a tetrahedral coordination geometry. Two Zn^II atoms are bridged by two carboxylate groups of L²⁻ ligands, generating a [Zn₂(CO₂)₂] ring. Each loop serves as a fourfold node, which links its four equivalent nodes via the sharing of four L²⁻ ligands to form a two‐dimensional [Zn₂L₄]_n net. These nets are separated by bpe ligands acting as spacers, producing a three‐dimensional framework with a 4⁶6⁴ topology. Powder X‐ray diffraction and solid‐state photoluminescence were also measured.     

Synthesis of (+) or (-)-2-(8′-Diphenylphosphino-1′-naphthyl)oxazoline Ligands and Their Application in Pd-Catalyzed Allylic Alkylation Reaction

ＩｎｔｒｏｄｕｃｔｉｏｎＷｉｔｈｔｈｅｆａｍｏｕｓＤＩＯＰｌｉｇａｎｄ ,ＫａｇａｎｉｎｔｒｏｄｕｃｅｄｔｈｅｉｍｐｏｒｔａｎｔｃｏｎｃｅｐｔｏｆＣ2 ｓｙｍｍｅｔｒｙｉｎｌｉｇａｎｄｄｅｓｉｇｎ .1Ｈｏｗｅｖｅｒ ,ｉｔｉｓｎｏｔａｌｗａｙｓｔｒｕｅｔｈａｔａＣ2 ｓｙｍｍｅｔｒｉｃｌｉｇａｎｄｓｈｏｕｌｄｎｅｃｅｓｓａｒｉｌｙｂｅｓｕｐｅｒｉｏｒｔｏａｎｏｎ ｓｙｍｍｅｔｒｉｃｃｏｕｎ ｔｅｒｐａｒｔ .Ｔｒａｎｓｉｔｉｏｎｍｅｔａｌ ｃａｔａｌｙｚｅｄａｌｌｙｌｉｃａｌｋｙｌａｔｉｏｎｖｉａｓｙｍｍｅ…