Organometallic Au(III) Based Electrochemical Sensor with Wide Anodic Potential Window for Sensitive and Selective Detection of Ochratoxin A

Herein, an organometallic Au(III) catalyst was easily prepared via self-assembly method using chloroauric acid (HAuCl₄) and cetyltrimethylammonium bromide (CTAB). The electrode fabricated by the catalyst not only shows extended anodic potential window compared to that of Au nanoparticle-based electrode, but also possess the high electrocatalytic activity in the selective oxidation of Ochratoxin A. Under optimized conditions, the modified electrode exhibits a wide linearity range from 1.0×10⁻⁷ to 1.0×10⁻⁵ mol/L and a low detection limit of 2.9×10⁻⁸ mol/L (S/N=3). Furthermore, the electrochemical sensor possesses good recoveries between 93.5 % and 98.2 % in real sample analysis, indicating high accuracy in real sample analysis.     

Adsorption voltammetry of nandrolone phenylpropionate

The electrochemical behavior of nandrolone phenylpropionate (NP) at a hanging mercury drop electrode (HMDE) was investigated. The adsorption phenomena were observed by linear sweep voltammetry in NaOH. The electrode reaction was found to be a totally irreversible reduction of the adsorbed NP. In 1 × 10⁻⁷ mol/L NaOH, the detection limit and the linear range are 5 × 10⁻¹⁰ and 8 × 10⁻¹⁰–5 × 10⁻⁷ mol/L, respectively. The relative standard deviation of the method is 1.6 % for 1.7 × 10⁻⁷ mol/L NP. The method was applied to the determination of NP in clinical ampuls.     

Voltammetric Characterisation of Anticancer Drug Irinotecan

Electrochemical reduction of irinotecan was investigated on a static mercury drop electrode using square‐wave voltammetry. The mechanism of irinotecan electroreduction is a complex, pH‐dependent, quasireversible process and includes the transfer of two electrons and two protons. In acidic medium, the first electron transfer reaction is followed by the chemical reaction, and the product of this chemical reaction undergoes further electrochemical reduction at more negative potentials. Both irinotecan and the product of its reduction adsorb on the mercury electrode surface. Based on the adsorptive character of irinotecan, a new adsorptive stripping square‐wave voltammetric method for its electroanalytical determination has been proposed. The voltammetric response could be used to determine irinotecan in the concentration range from 1×10⁻⁷ mol/L to 1.5×10⁻⁶ mol/L and from 5×10⁻⁹ mol/L to 1.2×10⁻⁷ mol/L, if the accumulation time is 20 s and 300 s, respectively. The calculated limit of detection for irinotecan was found to be 8.7×10⁻⁹ mol/L (if t_acc=300 s).     

Determination of rutin using a CeO2 nanoparticle-modified electrode

CeO₂ nanoparticles approximately 12 nm in size were synthesized and subsequently characterized by XRD, TEM and UV-vis spectroscopy. Then, a gold electrode modified with CeO₂ nanoparticles was constructed and characterized by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The modified electrode demonstrated strong catalytic effects with high stability towards electrochemical oxidation of rutin. The anodic peak currents (measured by differential pulse voltammetry) increased linearly with the concentration of rutin in the range of 5.0 × 10⁻⁷–5.0 × 10⁻⁴ mol · L⁻¹. The detection limit (S/N = 3) was 2.0 × 10⁻⁷ mol · L⁻¹. The relative standard deviation (RSD) of 8 successive scans was 3.7% for 5.0 × 10⁻⁶ mol · L⁻¹ rutin. The method showed excellent sensitivity and stability, and the determination of rutin in tablets was satisfactory.     

Silver Doped Poly(L‐valine) Modified Glassy Carbon Electrode for the Simultaneous Determination of Uric Acid,Ascorbic Acid and Dopamine

In this paper, a silver doped poly(L ‐valine) (Ag‐PLV) modified glassy carbon electrode (GCE) was fabricated through electrochemical immobilization and was used to electrochemically detect uric acid (UA), dopamine (DA) and ascorbic acid (AA) by linear sweep voltammetry. In pH 4.0 PBS, at a scan rate of 100 mV/s, the modified electrode gave three separated oxidation peaks at 591 mV, 399 mV and 161 mV for UA, DA and AA, respectively. The peak potential differences were 238 mV and 192 mV. The electrochemical behaviors of them at the modified electrode were explored in detail with cyclic voltammetry. Under the optimum conditions, the linear ranges were 3.0×10^?7 to 1.0×10^?5 M for UA, 5.0×10^?7 to 1.0×10^?5 M for DA and 1.0×10^?5 to 1.0×10^?3 M for AA, respectively. The method was successfully applied for simultaneous determination of UA, DA and AA in human urine samples.     

Electrocatalytic oxidation of dopamine at the polyglycine chemically modified carbon fiber bundle electrode and its voltammetric resolution with uric acid

A polyglycine chemically modified electrode shows substantial catalytic ability towards dopamine (DA). The calibration graph obtained by linear sweep voltammetry for DA is linear in the range 2.0 × 10^–8～ 4.4 × 10^–6 mol/L and the detection limit is ca. 5.0 × 10^–9 mol/L. The catalytic ability towards DA results in the voltammetric resolution of DA and uric acid (UA) in the same solution, which is impossible at the unmodified electrode. Uric acid in less than 120-fold excess does not interfere with the determination of DA.     

Electrocatalytic oxidation of nitric oxide at nano-TiO2/Nafion composite film modified glassy carbon electrode

A novel nanocrystalline TiO₂ (nano-TiO₂) and Nafion composite film modified glassy carbon electrode has been developed for the determination of nitric oxide (NO) radical in an aqueous solution. This modified electrode can be employed as a NO sensor with a low detection limit, fast response, high sensitivity and selectivity. Two apparent anodic peaks were observed at 0.67 and 0.95 V at the nano-TiO₂ modified glassy carbon electrode by differential pulse voltammetry (DPV). After further modification with a thin film of Nafion, which was capable of preventing some anionic interference such as nitrite and ascorbic acid, only one peak appeared and the peak current enhanced greatly. The chronocoulometric experimental results showed NO was oxidized by one-electron transfer reaction at the composite film modified electrode. The amperometric responses increased linearly with the concentrations of NO ranging from 3.6×10⁻⁷ mol/L to 5.4×10⁻⁵ mol/L. The detection limit was estimated to be 5.4×10⁻⁸ mol/L. In this sensor system, the modification film provides complete selectivity for NO over nitrite anions (NO₂⁻).     

Graphdiyne and Ionic Liquid Composite Modified Gold Electrode for Sensitive Voltammetric Analysis of Rutin

It is significant to develop a point-of-care testing (POCT) method for rapid detection of medicinal molecules. In this paper, a graphdiyne (GDY)-ionic liquid (IL) composite was prepared via one-step facile ultrasound preparation process and then modified on gold (Au) electrode surface by simple casting method. Scanning electron microscopy and transmission electron microscopy were used to characterize the morphology of GDY-IL composite. Cyclic voltammetric results proved that GDY-IL composite on the electrode surface could effectively improve electron transfer rate, which meant that GDY-IL composite had high conductivity with big surface area. Finally, the modified electrode exhibited excellent performances for rutin detection with wider linear range (8.0×10⁻⁹ mol L⁻¹–2.0×10⁻⁶ mol L⁻¹ and 2.0×10⁻⁶ mol L⁻¹–1.5×10⁻⁴ mol L⁻¹) and lower detection limit (2.7 nmol L⁻¹, 3S₀/S). The Nafion/GDY-IL/Au electrode showed good sensitivity and high selectivity, which was satisfactory in analytical application to real samples. Therefore, the GDY-IL composite modified electrode has the potential applications in the POCT for electrochemical analysis of various medicinal molecules.     

尿酸在生物分子修饰电极上的伏安测定

采用循环伏安法制备了聚L-苯丙氨酸薄膜修饰玻碳电极,研究了尿酸在该修饰电极上的电化学行为,建立了循环伏安法测定尿酸的新方法。研究发现：在pH 5.6的磷酸盐缓冲溶液中,尿酸在聚L-苯丙氨酸修饰电极上于0.43V处产生一灵敏的氧化峰,应用循环伏安法测定其氧化峰电流与尿酸的浓度在2.0×10-6～3.0×10-4 mol/L呈良好的线性关系,检出限为1×10-6 mol/L。对1.0×10-5 mol/L尿酸平行测定5次,相对标准偏差为3.0％。该生物分子电极制作简单,重现性好,可用于尿液中尿酸的测定,结果令人满意     

Preparation and characterization of 3-[(1H-1,2,4-triazole-3-ylimino)methyl]naphtalene-2-ol film at the platinum surface for selective voltammetric determination of dopamine in the presence of uric acid and ascorbic acid

A [(1H-1,2,4-triazole-3-ylimino)methyl]naphthalene-2-ol (TMN-2-ol) film modified platinum (Pt) electrode has been fabricated by the electrochemical oxidation in acetonitrile solution. The modified surface was characterized by electrochemical impedance spectroscopy (EIS), scanning electron microscope (SEM), and X-ray photoelectron spectroscopy (XPS). The prepared Pt electrode can be used as a functional interface to sensitive and selective determination of dopamine (DA) in the presence of uric acid (UA) and ascorbic acid (AA) by square wave voltammetry (SWV) method. The limit of detection (LOD) and limit of quantification (LOQ) of DA were 9.25 × 10⁻⁸ and 2.78 × 10⁻⁷ M, respectively. Linear range of DA was found to be between 3.95 × 10⁻⁷ and 4.19 × 10⁻⁶ M.     

Graphite Oxide and Gold Nanoparticles as Alternative Materials in the Design of a Highly Sensitive Electrochemical Sensor for the Simultaneous Determination of Biological Species

New aspects related to electrochemical performance of modified carbon paste electrodes (CPE) of high analytical performance are presented in this work. We studied whether the functionalisation of graphite powder with oxygenated functional groups (graphite oxide, GrO) could affect the electrochemical features of a classical CPE. By introducing oxygen termination over the graphite surface, a remarkable improvement in electrochemical performance was verified, including enhancement of analytical signals and charge transfer kinetics, as demonstrated from electrochemical characterisation assays conducted by cyclic voltammetry and electrochemical impedance spectroscopy towards the potassium hexa‐cyanoferrate (II/III) probe. In addition, a positive effect was noted from the anchoring of Au nanoparticles on GrOPE. In analytical terms, two biologically relevant molecules were simultaneously determined using the proposed modified electrode based on GrO and AuNPs: epinephrine (EP) and uric acid (UA). Using differential pulse voltammetry (DPV), wide linear concentration ranges were founded for the analytical curves of EP and UA, and the limits of detection of 1.0×10⁻⁷ mol L⁻¹ (EP) and 5.0×10⁻⁸ mol L⁻¹ (UA) were predicted, respectively. The designed electrochemical sensor showed excellent precision of measurement and appropriate applicability for the analysis of biological fluids.     

A comparison study of adsorptive transfer voltammetry and solution phase voltammetry for the determination of caffeic acid

This study reports a comparison of adsorptive transfer and solution phase voltammetric methods for the study of caffeic acid. For this purpose, a platform was prepared by the modification of glassy carbon electrodes (GCEs) with MWCNTs and samarium nanoparticles (SmNPs) by means of an ultrasonic bath. The surface morphology of the platform was characterized using SEM, EDX and XRD. The adsorptive transfer voltammetric method was based on the adsorption of caffeic acid (CFA) at the surface of the modified electrode by keeping it into a solution of CFA. Afterwards, the modified electrode was transferred with the adsorbed species in a cell containing only 0.1 mol L⁻¹ phosphate buffer solution (PBS) for the analysis. The current response of CFA was found to be linear over a concentration from 5.0 × 10⁻¹⁰ mol L⁻¹ to 1.0 × 10⁻⁷ mol L⁻¹. The values of the limit of detection (LOD) and limit of quantification (LOQ) were 2.0 × 10⁻¹⁰ mol L⁻¹ and 6.67 × 10⁻¹⁰ mol L⁻¹, respectively. The adsorptive transfer method using the modified electrode (SmNPs/MWCNTs/GCE) has successfully been applied to food samples for determining CFA. The solution phase voltammetry was carried out by dipping the electrode into a voltammetric cell containing CFA. The plot of peak currents was linear over the concentration range of 5.0 × 10⁻⁹ mol L⁻¹ –8.0 × 10⁻⁸ mol L⁻¹. The values of LOD and LOQ were 2.0 × 10⁻⁹ mol L⁻¹ and 6.67 × 10⁻⁹ mol L⁻¹ for CFA using a classical solution phase voltammetry at the proposed platform. It was shown that the LOD obtained at adsorptive transfer voltammetry was 10-fold lower when compared to classical solution phase voltammetry.     

Selective Electrochemical Determination of Dopamine with Molecularly Imprinted Poly(Carbazole‐co‐Aniline) Electrode Decorated with Gold Nanoparticles

Dopamine (DA) is a significant neurotransmitter in the central nervous system, coexisting with uric acid (UA) and ascorbic acid (AA). UA and AA are easily oxidizable compounds having potentials close to that of DA for electrochemical analysis, resulting in overlapping voltammetric response. In this work, a novel molecularly imprinted (MI) electrochemical sensor was proposed for selective determination of DA (in the presence of up to 80‐fold excess of UA and AA), relying on gold nanoparticles (Au_nano)‐decorated glassy carbon (GC) electrode coated with poly(carbazole (Cz)‐co‐aniline (ANI)) copolymer film incorporating DA as template (DA imprinted‐GC/P(Cz‐co‐ANI)‐Au_nano electrode, DA‐MIP‐Au_nano electrode). The DA recognizing sensor electrode showed great electroactivity for analyte oxidation in 0.2 mol L^?1 pH 7 phosphate buffer. Square wave voltammetry (SWV) was performed within 10^?4–10^?5 mol L^?1 of DA, of which the oxidation peak potential was observed at 0.16 V. The limit of detection (LOD) and limit of quantification (LOQ) were 2.0×10^?6 and 6.7×10^?6 mol L^?1, respectively. Binary and ternary synthetic mixtures of DA‐UA, DA‐AA and DA‐UA‐AA yielded excellent recoveries for DA. Additionally, DA was quantitatively recovered from a real sample of bovine serum spiked with DA, and determined in concentrated dopamine injection solution. The developed SWV method was statistically validated against a literature potentiodynamic method using a caffeic acid modified‐GC electrode.     

Simultaneous Voltammetric Detection of Salsolinol and Uric Acid in the Presence of High Concentration of Ascorbic Acid with Gold Nanoparticles/Functionalized Multiwalled Carbon Nanotubes Composite Film Modified Electrode

This work demonstrates gold nanoparticles (AuNPs)/functionalized multiwalled carbon nanotubes (f‐MWCNT) composite film modified gold electrode via covalent‐bonding interaction self‐assembly technique for simultaneous determination of salsolinol (Sal) and uric Acid (UA) in the presence of high concentration of ascorbic acid (AA). In pH 7.0 PBS, the composite film modified electrode exhibits excellent voltammetric response for Sal and UA, while AA shows no voltammetric response. The oxidation peak current is linearly increased with concentrations of Sal from 0.24–11.76 μmol L^?1 and of UA from 3.36–96.36 μmol L^?1, respectively. The detection limits of Sal and UA is 3.2×10^?8 mol L^?1 and 1.7×10^?7 mol L^?1 , respectively.     

Determination of Ascorbic Acid in the Presence of Uric Acid and Folic Acid by a Nanostructured Electrochemical Sensor Based on a TiO2 Nanoparticle Carbon Paste Electrode

A carbon paste electrode (CPE), modified with novel hydroquinone/TiO₂ nanoparticles, was designed and used for simultaneous determination of ascorbic acid (AA), uric acid (UA) and folic acid (FA). The magnitude of the peak current for modified TiO₂-nanoparticle CPE (MTNCPE) increased sharply in the presence of ascorbic acid and was proportional to its concentration. A dynamic range of 1.0–1400.0 μM, with the detection limit of 6.4 × 10^?7 M for AA, was obtained using the DPV technique (pH = 7.0). The prepared electrode was successfully applied for the determination of AA, UA, and FA in real samples.     

Direct Electrochemistry of Hemoglobin Entrapped in Composite Electrodeposited Chitosan‐Multiwall Carbon Nanotubes and Nanogold Particles Membrane and Its Electrocatalytic Application

Hemoglobin was entrapped in composite electrodeposited chitosan‐multiwall carbon nanotubes (MCNTs) film by assembling gold nanoparticles and hemoglobin step by step. In phosphate buffer solution (pH 7), a pair of well‐defined and quasireversible redox peaks appeared with formal potential at ?0.289 V and peak separation of 100 mV. The redox peaks respected for the direct electrochemistry of hemoglobin at the surface of chitosan‐MCNTs‐gold nanoparticles modified electrode. The parameters of experiments have also been optimized. The composite electrode showed excellent electrocatalysis to peroxide hydrogen and oxygen, the peak current was linearly proportional to H₂O₂ concentration in the range from 1×10^?6 mol/L to 4.7×10^?4 mol/L with a detection limit of 5.0×10^?7 mol/L, and this biosensor exhibited high stability, good reproducibility and better selectivity. The biosensor showed a Michaelis–Menten kinetic response as H₂O₂ concentration is larger than 5.0×10^?4 mol/L, the apparent Michaelis–Menten constant for hydrogen peroxide was calculated to be 1.61 μmol/L.     

多臂碳纳米管/Nafion复合材料修饰玻碳电极测定痕量的铅离子

A composite material of nitric acid oxidized multiwalled carbon nanotube （MWNT） and Nation was prepared. Such composite was modified on a glassy carbon electrode to determine trace of lead by differential pulsed voltammetry. In pH=6.47 NaNO3 solution, Pb^2＋ ions were accumulated on the modified electrode at -0.4 V. Compared with a bare and a Nation film coated electrode, the composite coated GC electrode can reduce the accumulating potential and eliminate the toxic character of mercury. The calibration plots were linear at low concentration of 5.0× 10^-9-2.0× 10^-8 mol/L and high concentration of 2.5× 10^-8-5.0× 10^-6 mol/L. The performances characteristics indicate that the electrode can be used to determine trace Pb^2＋ ions.     

Simultaneous Voltammetric Determination of Uric Acid and Ascorbic Acid Using a Carbon‐Paste Electrode Modified with Multi‐Walled Carbon Nanotubes/Nafion and Cobalt(II)nitrosalophen

A composition of multiwalled carbon nanotube (MWCNT), Nafion and cobalt(II)‐5‐nitrosalophen (CoNSal) is applied for the modification of carbon‐paste electrode (CPE). The pretreated MWCNT is well dispersed in the alcoholic solution of Nafion under the ultrasonic agitation, and the resulted suspension is used as modifier (with 10% w/w) in the matrix of the paste electrode. The prepared electrode further modified by addition of 3 wt% of CoNSal. The resulted modified electrode is used as a sensitive voltammetric sensor for simultaneous determination of uric acid (UA) and ascorbic acid (AA). The electrode showed efficient electrocatalytic activity in lowering the anodic overpotentials and enhancement of the anodic currents. This electrode is able to completely resolve the voltammetric response of UA and AA. The effects of potential sweep rate and pH of the buffer solution on the response of the electrode, toward UA and AA, and the peak resolution is thoroughly investigated by cyclic and differential pulse voltammetry (CV and DPV). The best peak resolution for these compounds using the modified electrode is obtained in solutions with pH 4. The ΔE_p for UA and AA in these methods is about 315 mV, which is considerably better than previous reports for these compounds. A linear dynamic range of 1×10^?7 to 1×10^?4 M with a detection limit of 6×10^?8 M is resulted for UA in buffered solutions with pH 4.0. The voltammetric response characteristics for AA are obtained as, the linear range of 5×10^?7 to 1×10^?4 M with the detection limit of 1×10^?7 M. The voltammetric detection system was very stable and the reproducibility of the electrode response, based on the six measurements during one month, was less than 3.5% for the slope of the calibration curves of UA and AA. The prepared modified electrode is successfully applied for the determination of AA and UA in mixture samples and reasonable accuracies are resulted.     

Meldola's Blue Immobilized on a SiO2/SnO2/Phosphate Xerogel,a New Sensor for Determination of Ascorbic Acid in Medicine and Commercial Fruit Juice

A modified carbon paste electrode with SiO₂/SnO₂/Phosphate/Meldola's blue, SSPMelB, was used to study the electrocatalytic oxidation of ascorbic acid by cyclic voltammetry and chronoamperometry. The adsorbed dye mediates ascorbic acid oxidation at an anodic potential of 0.04 V vs. saturated calomel electrode (SCE) at pH 7.0, in 0.5 mol L^?1 solution. The linear range of the sensor is between 4.0×10^?7 and 2.0×10^?3 mol L^?1, with a limit of detection of 4.0×10^?7 mol L^?1. This novel electrode shows good analytical performance for determination of ascorbic acid in medicine and commercial fruit juice.     

Novel Designing of Chemically Modified Electrode (CME) of the Bio-MOF-1 for the Detection of Dopamine Based on Inhibition of [Ru(bpy)3]2+/DBAE System

Metal organic frameworks (MOFs) have attracted extensive attention in electrochemical research fields due to their high surface area and controlled porosity. Current study is design to investigate the ECL performance of the chemically modified electrode (CME) based on the bio-MOF-1, a porous zinc-adenine framework, which loaded ruthenium complex and employed for the detection of dopamine (DA). The composite material [Ru(bpy)₃]²⁺@bio-MOF-1 (Ru-bMOF) modified carbon glassy electrode (Ru-bMOF/GCE) exhibited an excellent ECL performance having a linear co-efficient response (R²=0.9968) for 2-(dibutyl amino) ethanol (DBAE), a classical ECL co-reactant was obtained over a concentration range of 1.0×10⁻⁹ M to 1.0×10⁻⁴ M in 0.10 M pH=6.0 phosphate buffer solution (PBS). Furthermore, DA was detected based on its inhibition effect on [Ru(bpy)₃]²⁺/DBAE system. Compared to traditional analytical methods, this method has various advantages such as simple electrode preparation, quick response, high reproducibility (RSD<2.0 %), low limit of detection (LOD=1.0×10⁻¹⁰ mol/L). This chemical investigated modified electrode had exploited potential for detection of DA.