The First-principles Calculations of H2S Adsorption and Decomposition on the ZnO（0001） Surface

The adsorption and decomposition of H2S on the ZnO(0001) surface have been investigated with first-principles calculations.The results reveal that H2S is dissociatively adsorbed on the clean ZnO(0001) surface to generate HS-and hydrogen species.To our interest,as indicated by Mulliken charge and density of states of the configuration calculation,the bonding mechanism of H2S on the ZnO(0001) surface can involve the donation of charge from the "s lone pairs" into the surface and the back donation of surface electrons to H2S.Therefore,the electrons should play an important role in decomposition.Furthermore,the reactivity of H2S adsorption and further thermal decomposition reactions on the ZnO(0001) surface have also been discussed by calculating the possible reaction pathways.As expected,H2 will be easily generated during the decomposition process.     

Design,Synthesis and Biological Activity of Ethyl 2-（N-Substituted-arylsulfonamido）-2-oxoacetate

Thirteen new ethyl 2-（N-substituted-arylsulfonamido）-2-oxoacetates（3a-3m）, based on the structure of Ketol-acid reductoisomerase（KARI） inhibitor IpOHA, were designed and synthesized. Their structures were established on the basis of ^1H NMR, IR, MS, and elemental analyses. The bioassay result reveals that the structural changes from hydroxyl group on the N atom of IpOHA to arylsulfonyl groups does not enhance the inhibitory activity of the compounds to KARI in vitro. Compounds 3c, 3h, 3k, and 3m are more effective than IpOHA against the monocotyledonous bamygrass at 100 ug/mL in herbicidal tests.     

Suppression of Photoinduced BBO Defects Generation on TIO2（110） by Water

We have investigated creation of variable concentrations of defects on TIO2（110）-（1×1） surface by 266 nm laser using temperature programmed desorption technique. Oxygen-vacancy defects can be easily induced by ultraviolet light, the defects concentration has a linear dependence on power density higher than 50 mW/cm2 for 90 s irradiation. No observation of O2 molecule and Ti atom desorption suggests that UV induced defects creation on TiO2（110）-（1×1） is an effective and gentle method. With pre-dosage of thin films of water, the rate of defects creation on TiO2（110）-（1×1） is slower at least by two orders of magnitude than bare TiO2（110）-（1×1） surface. Further investigations show that water can be more easily desorbed by UV light, and thus desorption of bridging oxygen is depressed.     

Electrolessly Plated Ni-Zn（Fe）-P Alloy and Its Corrosion Resistance Properties

The autocatalytic deposition of Ni-Zn(Fe)-P alloys has been carried out on substrate of carbon steel from a bath containing nickel sulfate, zinc sulfate, sodium hypophosphite, sodium citrate and boric acid. The effects of pH and the molar ratio of NiSO4/ZnSO4 on the deposition rate and the composition of deposits have been studied. It was found that the presence of zinc sulfate in the bath has an inhibitory effect on the alloy deposition. The structure and the surface morphology of Ni-Zn(Fe)-P coatings were characterized with XRD and SEM, respectively. The alloys plated under the experimental conditions consisted of an amorphous phase coexisting with a crystalline cubic Ni phase (poly-crystalline). The surface morphology of the coating is dependent on the deposition parameters. The corrosion resistance of the Ni-Zn(Fe)-P deposits was examined via mass loss tests and anodic polarization measurements, respectively. The results show that the surface morphologies of the deposits and the corrosion resistance of the deposits have been improved. The results of mass loss tests almost accord with those of anodic polarization measurements. The corrosion mechanisms of Ni-Zn(Fe)-P alloys in NaCl and NaOH solutions were investigated by means of EDX. The deposit immersed in an NaCI or an NaOH solution contains more content of oxygen and less contents of the metals(except Fe) than that placed in air, which shows that the NaCl or NaOH solution can accelerate the oxidation of the deposit.     

CO_2 Reforming of CH_4 over Ni/CeO_2-ZrO_2-Al_2O_3 Prepared by Hydrothermal Synthesis Method

The Ni/CeO2-ZrO2-Al2O3 catalyst with different Al2O3 and NiO contents were prepared by hydrothermal synthesis method. The catalytic performance for CO2 reforming of CH4 reaction, the interaction among components and the relation between Ni content and catalyst surface basicity were investigated. Results show that the interaction between NiO and Al2O3 is stronger than that between NiO and CeO2-ZrO2.The addition of Al2O3 can prevent the formation of large metallic Ni ensembles, increase the dispersion of Ni, and improve catalytic activity, but excess Al2O3 causes the catalyst to deactivate easily. The interaction between NiO and CeO2 results in more facile reduction of surface CeO2. The existence of a small amount of metallic Ni can increase the number of basic sites. As metallic Ni may preferentially reside on the strong basic sites, increasing Ni content can weaken the catalyst basicity.     

The effects of surface ligands and counter cations on the stability of anionic thiolated M12Ag32 （M=Au,Ag） nanoclusters

The stabilities of [M12Ag32（SR）30]4- （M = Ag, Au and SR = SPhF2, SPhCF3, SPhF） clusters having the same structure but different surface ligands or counter cations were systematically studied. It was clearly revealed that a subtle structural change in the surface ligands or counter cations could significantly alter the overall stability of [M12Ag32（SR）30]4 although they all had an electronic structure of 18-electron superatom shell closure. SPhF2 was found as a better surface ligand than SPhCF3 or SPhF to stabilize [M12Ag32（SR）30]4-. And the use of more bulky [（PPhj）2N]＋ as the counter cations was revealed to be more deleterious to the overall stability of [M12Ag32（SR）30]4- clusters than PPh4＋. [Au12Ag32（SR）30]4- was much more stable than [Ag44（SR）30]4 with the same surface ligands and counter cations. An exceptional stability was observed on （PPh4）4[Au12Ag32（SPhF2）30] which was stable in DMF for more than 8 days in air at 80 ℃. More research efforts are still needed to deeply understand why a small structural change could result in a significant change in the stability of noble metal nanoclusters.     

CO2 Reforming of CH4 over Ni／CeO2-ZrO2-Al203 Prepared by Hydrothermal Synthesis Method

The Ni/CeO2-ZrO2-A12O3 catalyst with different A12O3 and NiO contents were prepared by hydrothermal synthesis method. The catalytic performance for CO2 reforming of CH4 reaction, the interaction among components and the relation between Ni content and catalyst surface basicity were investigated. Results show that the interaction between NiO and A12O3 is stronger than that between NiO and CeO2-ZrO2. The addition of A12O3 can prevent the formation of large metallic Ni ensembles, increase the dispersion of Ni, and improve catalytic activity, but excess A12O3 causes the catalyst to deactivate easily. The interaction between NiO and CeO2 results in more facile reduction of surface CeO2. The existence of a small amount of metallic Ni can increase the number of basic sites. As metallic Ni may preferentially reside on the strong basic sites, increasing Ni content can weaken the catalyst basicity.     

Adsorption and Vibration of CI Atoms on Ni Low-index Surfaces

The 5-parameter Morse potential（5-MP） of the interactions between Cl atoms and Ni surfaces was constructed. The adsorption and diffusion of Cl atoms on Ni low index-surfaces were investigated with 5-MP in detail. All the critical characteristics of the system, such as adsorption site, adsorption geometry, binding energy, eigenvalues for vibration, etc. were obtained. The calculated results show that chlorine atoms are likely to be adsorbed on the high symmetry- sites. Cl atoms locate on the four-fold hollow sites of the intact Ni（100） surface, while they tend to occupy threefold sites on the Ni（ 111 ） surface. The four-fold hollow sites are the most stable adsorption sites on the Ni （110） surface for Cl, although the three-fold sites and the long-bridge sites are stable adsorption sites on the Ni（110） surface for the atoms of the first and second periods. For the Cl-Ni surface adsorption system, the surface binding energy of a Cl atom is relevant to the coarse degree of the cluster surface, and the binding energies have an order of Ni （ 111 ） 〈 Ni（100） 〈Ni（100）.     

First-Principle Studies on Adsorption of Cu^＋ and Hydrated Cu^＋ Cations on Clean Si（111） Surface

To study the adsorption behavior of Cu+ in aqueous solution on semiconductor surface, the interactions of Cu+ and hydrated Cu+ cations with the clean Si(111) surface were investigated via hybrid density functional theory(B3LYP) and Mller-Plesset second-order perturbation(MP2) method. The clean Si(111) surface was described with cluster models(Si14H17, Si16H20 and Si22H21) and a four-silicon layer slab under periodic boundary conditions. Calculation results indicate that the bonding nature of adsorption of Cu+ on Si surface can be viewed as partial cova- lent as well as ionic bonding. The binding energies between hydrated Cu+ cations and Si(111) surface are large, suggesting a strong interaction between them. The coordination number of Cu+(H2O)n on Si(111) surface was found to be 4. As the number of water molecules is larger than 5, water molecules form a hydrogen bond network. In aqueous solution, Cu+ cations will safely attach to the clean Si(111) surface.     

Investigation of the Adsorption and Self Assembly of Isocyanide Derivatives on Au（111） Surface

The adsorption and self-assembly of isocyanide derivatives on Au（111） surface were investigated by density functional theory （DFF） and molecular dynamics simulation. The calculation for phenyl isocyanide by DFT was based on cluster and slab models. The self-assembled monolayers of 2-isocyanoazulene and 1,3-diethoxycarbony 1- 2-isocyanoazulene on Au（111） were simulated using Au-C force field parameters developed by us. It was found that the top site was the most preferred position, and the isocyanoazulene and its derivatives could form the ordered face to edge self-assembled monolayer on gold surface indeed, and the molecules stood on the gold surface vertically.     

流化床中高分散镍基催化剂上甲烷的自热重整和部分氧化

Highly dispersed Ni catalysts on spherical SiO2 were prepared by simple impregnation of Ni（acac）2, [Ni-（NH3）6-n（H2O）n]^2＋, [Ni（en）3]^2＋ and [Ni（EDTA）]^2-. Pulse adsorption of H2 and TEM analysis results confirmed that Ni was dispersed very well on the surface of SiO2 even after calcination （4 h） and reduction （1 h） at high temperature of 800 ℃. These highly dispersed and uniquely sized Ni crystallites were more stable and more reactive for both autothermal reforming and partial oxidation of methane in fluidized reactor.     

Theoretical Investigation on the Adsorption of Ag^＋ and Hydrated Ag^＋ Cations on Clean Si（111） Surface

In this paper, the adsorption of Ag^＋ and hydrated Ag^＋ cations on clean Si（111） surface were investigated by using cluster （Gaussian 03） and periodic （DMol^3） ab initio calculations. Si（111） surface was described with cluster models （Si14H17 and Si22H21） and a four-silicon layer slab with periodic boundary conditions. The effect of basis set superposition error （BSSE） was taken into account by applying the counterpoise correction. The calculated results indicated that the binding energies between hydrated Ag^＋ cations and clean Si（111） surface are large, suggesting a strong interaction between hydrated Ag^＋ cations and the semiconductor surface. With the increase of number, water molecules form hydrogen bond network with one another and only one water molecule binds directly to the Ag^＋ cation. The Ag^＋ cation in aqueous solution will safely attach to the clean Si（111） surface.     

First-principles Calculations of H2O Adsorption Reaction on the GaN（0001） Surface

The adsorption and decomposition of H2O on GaN（0001） surface have been explored employing density functional theory （DFT）. Two distinct adsorption features of H2O on GaN（0001） corresponding to molecular adsorption and H-OH dissociative adsorption are revealed by our calculations. The activities of the surface reactions of H2O on GaN（0001） surface are investigated. For the stepwise processes of H2O decomposition into H2 in gas phase and adsorbed O atom （H2O（g）→H2O（chem）→OH（chem） ＋ H（chem）→2H（chem） ＋ O（chem）→H2（g） ＋ O（chem））, the first and second steps are facile and can even occur at room temperature; while the last two have high barriers and thus are difficult to proceed, especially the fourth step is endothermic. In short, H2O adsorption and decomposition into H2 in gas phase and adsorbed O atom on GaN（0001） surface are exothermic by -43.98 kcal/mol.     

Study of H2O and HOCH2CH2OH Adsorption on the Relaxation Surface of β-Si3N4（0001） by Density Functional Theory

Density functional theory （DFT） B3LYP method is used to theoretically investigate the adsorption conformations of H2O and glycol on the relaxation surface of β-Si3N4（0001） with cluster models. For H2O, the most stable structure is that adsorbed through the H atom lying above a N（3） site of the relaxation surface of β-Si3N4（0001）; while for glycol, it is the one adsorbed via the H atom lying above the center of Si（2） and N（3） of the same relaxation surface. The adsorption energy, adsorption bond and transfer electrons of the two adsorbed substances prove that glycol is easy to be adsorbed on the relaxation surface of β-Si3N4（0001）.     

The Deactivation of Nickel Hydroxide to Hypophosphite Electrooxidation on a Nickel Electrode

The deactivation of nickel hydroxide to the electrooxidation of hypophosphite on a nickel electrode was studied by means of in situ UV-Vis subtractive reflectance spectroscopy. The experimental results show that when the potential is lower than -1.0 V (SCE), the surface on nickel electrode is free of nickel hydroxide, on which hypophosphite is active. When the potential moves positively to about 0.75V, two absorbency bands around 300nm and 550nm, which were ascribed to the formation of α-nickel hydroxide, were observed, nickel is oxidized to α-nickel hydroxide. Severe deactivation of the surface occurs when the nickel surface is covered with nickel hydroxide, which separates the hypophosphite ion from nickel substrate.     

Theoretical Study on the Adsorption and Decomposition of Methanol over the Pt-Mo（111）/C Surface

The density functional theory(DFT) and self-consistent periodic calculation were used to investigate the methanol adsorption on the Pt-Mo(111)/C surface.The adsorption energies,equilibrium geometries and vibration frequencies of CH3OH on nine types of sites on the Pt-Mo(111)/C surface were predicted and the favorite adsorption site for methanol is the top-Pt site.Both sites of valence and conduction bands of doped system have been broadened,which are favorable for electrons to transfer to the cavity.The possible decomposition pathway was investigated with transition state searching and the calculation results indicate that the O-H bond is first broken,and then the methanol decomposes into methoxy.The activation barrier of O-H bond breaking with Pt-Mo catalyst is only 104.8 kJ mol-1,showing that carbon supported Pt-Mo alloys have promoted the decomposition of methanol.Comparing with the adsorption energies of CH3OH on the Pt(111)/C surface and that of CO,the adsorption energies of CO are higher,and Pt(111)/C is liable to be oxidized and loses the activity,which suggests that the catalyst Pt-Mo(111)/C is in favor of decomposing methanol and has better anti-poisoning ability than Pt(111)/C.     

First-principles characterization of formate and carboxyl adsorption on stoichiometric CeO2（111）and CeO2（110） surfaces

Molecular adsorption of formate and carboxyl on stoichiometric CeO₂（111） and CeO₂（110） surfaces was studied using periodic density functional theory（DFT+U） calculations.Two distinguishable adsorption modes（strong and weak） of formate are identified.The bidentate configuration is more stable than the monodentate adsorption configuration.Both formate and carboxyl bind at the more open CeO₂（110） surface are stronger.The calculated vibrational frequencies of two adsorbed species are consistent with the experimental measurements.Finally, the effects of U parameters on the adsorption of formate and carboxyl over both CeO₂ surfaces were investigated.We found that the geometrical configurations of two adsorbed species are not affected by different U parameters（U=0,5,and 7）.However,the calculated adsorption energy of carboxyl pronouncedly increases with the U value while the adsorption energy of formate only slightly changes（<0.2 eV）. The Bader charge analysis shows the opposite charge transfer occurs for formate and carboxyl adsorption where the adsorbed formate is negatively charge while the adsorbed carboxyl is positively charged.Interestingly,with the increasing U parameter,the amount of charge is also increased.     

Density Functional Theory Study on the Adsorption of CN on Transition Metal M（100） （M = Ni,Pd, Pt,Cu, Ag and Au） Surfaces

The adsorption of cyanide on the top site of a series of transition metal M（100） （M = Cu, Ag, Au, Ni, Pd, Pt） surfaces via carbon and nitrogen atoms respectively, with the CN axis perpendicular to the surface, has been studied by means of density functional theory and cluster model. Geometry, adsorption energy and vibrational frequencies have been determined, and the present calculations show that the adsorption of CN through C-end on metal surface is more favorable than that via N-end for the same surface. The vibrational frequencies of CN for C-down configuration on surface are blue-shifted with respect to the free CN, which is contrary to the change of vibrational frequencies when CN is adsorbed by N-down structure. Furthermore, the charge transfer from surface to CN causes the increase of surface work function.     

Electrooxidation Mechanism of Methanol at Pt-Ru Catalyst Modified GC Electrode in Electrolytes with Different pH Using Electrochemical and SERS Techniques

The electrochemical and in-situ surface-enhanced Raman spectroscopy （SERS） techniques were used to investigate the electrooxidation behavior of methanol in acidic, neutral and alkaline media at a Pt-Ru nanoparticle modified glassy carbon （Pt-Ru/GC） electrode. The results showed that methanol could be dissociated spontaneously at the Pt-Ru/GC electrode to produce a strongly adsorbed intermediate, CO. It was found that CO could be oxidized more easily in the alkaline medium than in the acidic and neutral media. The peak potential of methanol oxidation was shifted from 0.663 and 0.708 V in the acidic and neutral media to -0.030 V in the alkaline medium, which is due to that the adsorption strength of CO on the Pt surface in the alkaline medium is weaker than that in the acidic and neutral media. The final product of the methanol oxidation is CO2. However, in the alkaline medium, CO2 produced would form CO3^2- and HCO3^- resulting in the decrease in the alkaline concentration and then in the decrease in the performance of DMFC. Therefore, the performance of the alkaline DMFC is not Stable.     

Study of Hydrogen Adsorption on Pt/WO3-ZrO2 through Pt Sites

The rate determining step and the energy barrier involved in hydrogen adsorption on Pt/WO_3- ZrO_2 were studied based on the assumption that the hydrogen adsorption occurs only through Pt sites. The rate of hydrogen adsorption on Pt/WO_3-ZrO_2 was measured in the adsorption temperature range of 323-573 K and an initial hydrogen pressure of 50 Torr.The rates of hydrogen uptake were very high for the initial few minutes and the adsorption continued for more than 5 h below 523 K.The hydrogen uptake far exceeded the H/Pt ratio of unity for all adsorption temperatures,indicating that the adsorption of hydrogen involved the dissociative adsorption of hydrogen on Pt sites to form hydrogen atoms,the spillover of hydrogen atoms onto the surface of the WO_3-ZrO2 catalyst,the diffusion of spiltover hydrogen atom over the surface of the WO_3-ZrO_2 catalyst,and the formation of protonic acid site originated from hydrogen atom by releasing an electron in which the electron may react with a second hydrogen atom to form a hydride near the Lewis acid site.The rate determining step was the spillover with the activation energy of 12.3 kJ/mol.The rate of hydrogen adsorption cannot be expressed by the rate equation based on the assumption that the rate determining step is the surface diffusion.The activity of Pt/WO_3-ZrO_2 was examined on n-heptane isomerization in which the increase of hydrogen partial pressure provided positive-effect on the conversion of n-heptane and negative-effect on the selectivity towards iso-heptane.