纳米TiO2膜用于光催化氧化测定化学需氧量的研究

A photocatalytic oxidation method for determination of chemical oxygen demand （COD） using nano-TiO2 film, based on the use of a nano-TiO2-Ce（SO4）2 system and electrochemical detection, was proposed. The technique was originated from the direct determination of the Ce（Ⅲ） concentration change resulting from photocatalytic oxidation of organic compounds. Ce（Ⅲ）, which was produced by photocatalytic reduction of Ce（SO4）2, could be measured at a multi-walled carbon nanotubes （MWNT） chemically modified electrode （CME）. The COD values by this method were calculated from the differential pulse voltammetry （DPV） current of Ce（Ⅲ） at the CME. Under the optimal operation conditions, the detection limit of 0.5 mg·L^-1 COD with the linear range of 1-600 mg·L^-1 was achieved. This method was also applied to determination of various COD of ground water and wastewater samples. The resuits were in good agreement with those from the conventional COD methods, i.e., permanganate and dichromate ones.     

A New Amperometric Biosensor Based on HRP/Nano-Au/L-Cysteine/Poly（o-Aminobenzoic acid）-Membrane-Modified Platinum Electrode for the Determination of Hydrogen Peroxide

The third generation amperometric biosensor for the determination of hydrogen peroxide （H2O2） has been described. For the fabrication of biosensor, o-aminobenzoic acid （oABA） was first electropolymerized on the surface of platinum （Pt） electrode as an electrostatic repulsion layer to reject interferences. Horseradish peroxidase （HRP） absorbed by nano-scaled particulate gold （nano-Au） was immobilized on the electrode modified with polymerized o-aminobenzoic acid （poABA） with L-cysteine as a linker to prepare a biosensor for the detection of H2O2. Amperometric detection of H2O2 was realized at a potential of ＋20 mV versus SCE. The resulting biosensor exhibited fast response, excellent reproducibility and sensibility, expanded linear range and low interferences. Temperature and pH dependence and stability of the sensor were investigated. The optimal sensor gave a linear response in the range of 2.99×10^-6 to 3.55×10^-3 mol·L^-1 to H2O2 with a sensibility of 0.0177 A·L^-1·mol^-1 and a detection limit （S/N = 3） of 4.3×10^-7 mol·L^-1. The biosensor demonstrated a 95% response within less than 10 s.     

Direct Electrochemistry and Electrocatalysis of Hemoglobin Based on Nafion‐Room Temperature Ionic Liquids‐Multiwalled Carbon Nanotubes Composite Film

A robust and effective composite film combined the benefits of Nafion, room temperature ionic liquid (RTIL) and multi‐wall carbon nanotubes (MWNTs) was prepared. Hemoglobin (Hb) was successfully immobilized on glassy carbon electrode surface by entrapping in the composite film. Direct electrochemistry and electrocatalysis of immobilized Hb were investigated in detail. A pair of well‐defined and quasi‐reversible redox peaks of Hb was obtained in 0.10 mol·L^?1 pH 7.0 phosphate buffer solution (PBS), indicating that the Nafion‐RTIL‐MWNTs film showed an obvious promotion for the direct electron transfer between Hb and the underlying electrode. The immobilized Hb exhibited an excellent electrocatalytic activity towards the reduction of H₂O₂. The catalysis current was linear to H₂O₂ concentration in the range of 2.0×10^?6 to 2.5×10^?4 mol·L^?1, with a detection limit of 8.0×10^?7 mol·L^?1 (S/N=3). The apparent Michaelis‐Menten constant (K_m^app) was calculated to be 0.34 mmol·L^?1. Moreover, the modified electrode displayed a good stability and reproducibility. Based on the composite film, a third‐generation reagentless biosensor could be constructed for the determination of H₂O₂.     

Direct Electrochemistry and Electrocatalysis of Hemoglobin/ZnO‐Chitosan/nano‐Au Modified Glassy Carbon Electrode

The highly efficient H₂O₂ biosensor was fabricated on the basis of the complex films of hemoglobin (Hb), nano ZnO, chitosan (CHIT) dispersed solution and nano Au immobilized on glassy carbon electrode (GCE). Biocompatible ZnO‐CHIT composition provided a suitable microenvironment to keep Hb bioactivity (Michaelis‐Menten constant of 0.075 mmol L^?1). The presence of nano Au in matrix could effectively enhance electron transfer between Hb and electrode. The electrochemical behaviors and effects of solution pH values were carefully examined in this paper. The (ZnO‐CHIT)‐Au‐Hb/GCE demonstrated excellently electrocatalytical ability for H₂O₂. This biosensor had a fast response to H₂O₂ less than 4 s and excellent linear relationships were obtained in the concentration range from1.94×10^?7 to 1.73×10^?3 mol L^?1 with the detection limit of 9.7×10^?8 mol L^?1 (S/N=3) under the optimum conditions. Moreover, the stability and reproducibility of this biosensor were evaluated with satisfactory results.     

Catalytic Adsorptive Stripping Voltammetry at a Carbon Paste Electrode for the Determination of Amiodarone

Voltammetry using solid electrodes usually suffers from the contamination due to the deposition of the redox products of analytes on the electrode surface. The contamination has resulted in poor reproducibility and overelaborate operation procedures. The use of the chemical catalysis of oxidant on the reduction product of analyte not only can eliminate the contamination of analyte to solid electrodes but also can improve the faradaic response of analyte. This work introduced both the catalysis of oxidant K2S2O8 and the enhancement of surfactant Triton X-100 on the faraday response of amiodarone into an adsorptive stripping voltammetry at a carbon paste electrode for the determination of amiodarone. The method exhibits high sensitivity, good reproducibility and simple operation procedure. In 0.2 mol·L^-1 HOAc-NaOAc buffer （pH=5.3） containing 2.2×10^-2 mol·L^-1 K2S2O8 and 0.002% Triton X-100, the 2.5th-order derivative stripping peak current of the catalytic wave at 0.3 V （vs. Ag/AgCl） is rectilinear to amiodarone concentration in the range of 2.0×10^-10-2.3×10^-8 mol·L^-1 with a detection limit of 1.5×10^-10 mol·L^-1 after accumulation at 0 V for 30 s.     

Enhanced Electrochemiluminescence of TiO2 Nanoparticles Modified Electrode by Nafion Film and Its Application in Selective Detection of Dopamine

In this work, a simple and effective approach to obtain stable, nontoxic and strong electrochemiluminescence (ECL) interfaces is provided by coating TiO₂ nanoparticles (NPs) modified glassy carbon electrode (GCE) surfaces with Nafion. Unlike a decrease of the current resulting from the blocked diffusion usually displayed in electrochemical processes by Nafion coating, a Nafion/TiO₂ NPs modified electrode not only shows a highly stable ECL, but also shows an 8‐fold increase of ECL intensity and a reduction of the overpotential of ca. 300 mV in the presence of K₂S₂O₈ as co‐reactant, compared with those of bare TiO₂ NPs modified electrodes. The roles of Nafion coating on TiO₂ NPs in the ECL process are proposed to be twofold: to provide refuge for the free radicals and to enhance the electron‐hole recombination. Benefiting from its excellent ECL performance, the cationic exchange function of Nafion and the susceptible to being oxidized performance of dopamine (DA) by holes, the Nafion/TiO₂ composite electrode could be used to sensitively and selectively detect DA with a detection limit of 1.0×10^?11 M and a linear range of 1.0×10^?11–6.0×10^?7 M. The coexisting anionic species such as excess ascorbic acid show little interference on DA detection.     

Isolation of a Methylobacterium organophilium strain, and its application to a methanol biosensor

A methanol-utilizing strain (ME25) using methanol (MeOH) as the sole carbon source has been isolated from methane-generating pits. ME25 was identified as Methylobacterium organophilium by its physiological characteristics and 16SrDNA sequence. A MeOH biosensor was then developed by immobilizing ME25 along with sensor for dissolved oxygen (O₂). Its response is based on the depletion of O₂ following oxidation of MeOH by the bacteria. The decrease in O₂ is linearly related to the MeOH concentration in the range from 1.6 mg·L^?1 to 4800 mg·L^?1 and the detection limit for MeOH is 0.27 mg·L^?1. The response time of the biosensor is around 20 min.     

Total Sulfur Dioxide Determination in Red Wine by Suppressed Ion Chromatography with In-Sample Oxidation and SPE

Suppressed ion chromatography (IC) based on in-sample oxidation and SPE is described for total sulfur dioxide determination in red wines. In this method, sulfur dioxide was converted to stable sulfate ion through a simple H₂O₂ oxidation step and then the impurities were removed with C-18 micro-column SPE pretreatment. Finally, the sulfate was determined by suppressed ion chromatography coupled with conductivity detection and the content of total sulfur dioxide could be obtained through sulfate content by blank deduction method. By using a mixture of NaHCO₃ and Na₂CO₃ as mobile phase, the analysis of one sample with nine anions could be completed within 25 min. For sulfate detection, a linear calibration curve with correlation coefficient of 0.9993 was obtained from the peak area with low detection limit (0.45 mg L^?1, 3σ) and excellent repeatability (RSD?=?1.12%, n?=?6). This method was applied to sulfur dioxide determination in real wine samples and compared with conventional iodometry.     

Synthesis,characterization and photocatalytic application of TiO2/magnetic graphene for efficient photodegradation of crystal violet

A magnetized nano‐photocatalyst based on TiO₂/magnetic graphene was developed for efficient photodegradation of crystal violet (CV). Scanning electron microscopy, X‐ray diffraction, energy‐dispersive X‐ray spectroscopy and elemental mapping were used to characterize the prepared magnetic nano‐photocatalyst. The photocatalytic activity of the synthesized magnetic nano‐photocatalyst was evaluated using the decomposition of CV as a model organic pollutant under UV light irradiation. The obtained results showed that TiO₂/magnetic graphene exhibited much higher photocatalytic performance than bare TiO₂. Incorporation of graphene enhanced the activity of the prepared magnetic nano‐photocatalyst. TiO₂/magnetic graphene can be easily separated from an aqueous solution by applying an external magnetic field. Effects of pH, magnetized nano‐photocatalyst dosage, UV light irradiation time, H₂O₂ amount and initial concentration of dye on the photodegradation efficiency were evaluated and optimized. Efficient photodegradation (>98%) of the selected dye under optimized conditions using the synthesized nano‐photocatalyst under UV light irradiation was achieved in 25 min. The prepared magnetic nano‐photocatalyst can be used in a wide pH range (4–10) for degradation of CV. The effects of scavengers, namely methanol (OH^? scavenger), p‐benzoquinone (O₂^?? scavenger) and disodium ethylenediaminetetraacetate (hole scavenger), on CV photodegradation were investigated.     

Synthesis,Antitumor and Apoptosis Inducing Activities of Novel 5‐Fluorouracil Derivatives of Rare Earth (Sm,Eu) Substituted Polyoxometalates

Two novel 5‐fluorouracil derivatives of rare earth (Sm, Eu) substituted polyoxometalates, K₉(C₄H₄FN₂O₂)₂Sm(PW₁₁O₃₉)₂·11H₂O (FSmPW) and K₉H(C₄H₄FN₂O₂)Eu(PW₁₁O₃₉)₂·11H₂O (FEuPW) were synthesized and characterized by element analysis, ICP, FT‐IR, ¹H NMR and XRD analysis. Thermal stability analysis was performed by TG and FT‐IR. The results of MTT assay show that FSmPW and FEuPW have higher cytotoxicity than known compound C₄H₄FN₂O₂H₂PW₁₂O₄₀·8H₂O, and the IC₅₀ values of FSmPW and FEuPW are 4.20, 3.49 µmol·L^?1 against HeLa cells and 4.62, 7.19 µmol·L^?1 against HepG‐2 cells. Apoptosis analysis reveals the apoptosis inducing activity of the two compounds, which may play an important role in the cytotoxicity of polyoxometalates.     

Study and Application of Polarographic Catalytic Wave of Chlordiazepoxide in the Presence of Persulfate

ＩｎｔｒｏｄｕｃｔｉｏｎＣｈｌｏｒｄｉａｚｅｐｏｘｉｄｅ (7 ｃｈｌｏｒｏ 2 ｍｅｔｈｙｌａｍｉｎｏ 5 ｐｈｅｎｙｌ 3Ｈ 1,4 ｂｅｎｚｏｄｉａｚｅｐｉｎｅ 4 ｏｘｉｄｅ)ｓｈｏｗｉｎｇｐｏｗｅｒｆｕｌａｎ ｔｉａｎｘｉｅｔｙｅｆｆｅｃｔｈａｓｂｅｅｎｗｉｄｅｌｙｕｓｅｄａｓａｐｓｙｃｈｏｔｈｅｒａｐｅｕ ｔｉｃｄｒｕｇ .Ｃｏｎｓｅｑｕｅｎｔｌｙ ,ｔｈｅｎｅｅｄａｒｏｓｅｆｏｒｓｅｎｓｉｔｉｖｅａｎｄｒａｐｉｄｄｅｔｅｒｍｉｎａｔｉｏｎｏｆｃｈｌｏｒｄｉａｚｅｐｏｘｉｄｅｉｎｂｌｏｏｄ ,ｕｒｉｎｅａｎ…     

Kinetic Studies on the Reaction of Sodium Hexacyanoferrate（ll） Complex with Peroxydisulfate Anion

The oxidation of Na₄Fe(CN)₆ complex by S₂O anion was found to follow an outer‐sphere electron transfer mechanism. We firstly carried out the reaction at pH=1. The specific rate constants of the reaction, k_ox, are (8.1±0.07)×10^?2 and (4.3±0.1)×10^?2 mol^?1·L·s^?1 at μ=1.0 mol·L^?1 NaClO₄, T=298 K for pH=1 (0.1 mol·L^?1 HCl0₄) and 8, respectively. The activation parameters, obtained by measuring the rate constants of oxidation 283–303 K, were ΔH^≠=(69.0±5.6) kJ·mol^?1, ΔS^≠=(?0.34±0.041)×10² J·mol^?1·K^?1 at pH=l and ΔH^≠=(41.3±5.5) kJ·mol^?1, ΔS^≠=(?1.27±0.33)×10² J·mol^?1·K^?1 at pH=8, respectively. The cyclic voltammetry of Fe(CN) shows that the oxidation is a one‐electron reversible redox process with E_1/2 values of 0.55 and 0.46 V vs. normal hydrogen electrode at μ=1.0 mol·L^?1 LiClO₄, for pH=1 and pH=8 (Tris). respectively. The kinetic results were discussed on the basis of Marcus theory.     

Direct Electron Transfer of Glucose Oxidase and Glucose Biosensor Based on Nano-structural Attapulgite Clay Matrix

The direct electrochemistry of glucose oxidase (GOD) was achieved based on the immobilization of GOD on a natural nano‐structural attapulgite (ATP) clay film modified glassy carbon (GC) electrode. The immobilized GOD displayed a pair of well‐defined quasi‐reversible redox peaks with a formal potential (E^0′) of ?457.5 mV (vs. SCE) in 0.1 mol·L^?1 pH 7.0 phosphate buffer solution. The peak current was linearly dependent on the scan rate, indicating that the direct electrochemistry of GOD in that case was a surface‐controlled process. The immobilized glucose oxidase could retain bioactivity and catalyze the oxidation of glucose in the presence of ferrocene monocarboxylic acid (FMCA) as a mediator with the apparent Michaelis‐Menten constant K^app_m of 1.16 mmol·L^?1. The electrocatalytic response showed a linear dependence on the glucose concentration ranging widely from 5.0×10^?6 to 6.0×10^?4 mol·L^?1 (with correlation coefficient of 0.9960). This work demonstrated that the nano‐structural attapulgite clay was a good candidate material for the direct electrochemistry of the redox‐active enzyme and the construction of the related enzyme biosensors. The proposed biosensors were applied to determine the glucose in blood and urine samples with satisfactory results.     

Fe_2O_3-Modified Hydrogen Storage Alloys as Electrocatalyst for Borohydride Oxidation

The effects of hot alkaline treatment and Fe₂O₃ modification of hydrogen storage alloy on the electrocatalytic activity for oxidation of borohydride have been investigated using linear sweep voltammetry. The performance of borohydride electrochemical oxidation was significantly influenced by the hot alkaline treatment and Fe₂O₃ modification of the hydrogen storage alloy. The results showed that the current density of the Fe₂O₃‐modified hot alkaline‐treated hydrogen storage alloy electrode containing 5 wt% Fe₂O₃ reached 125 mA·cm^?2 in 0.10 mol·L^?1 NaBH₄ and 2 mol·L^?1 NaOH solution at ?0.55 V vs. saturated Ag/AgCl, KCl electrode.     

An H2O2 Biosensor Based on Immobilization of Horseradish Peroxidase Labeled Nano‐Au in Silica Sol‐Gel/Alginate Composite Film

Abstract

A novel approach to assemble an H₂O₂ amperometric biosensor was introduced. The biosensor was constructed by entrapping horseradish peroxidase (HRP) labeled nano‐scaled particulate gold (nano‐Au) (HRP‐nano‐Au electrostatic composite) in a new silica sol‐gel/alginate hybrid film using glassy carbon electrode as based electrode. This suggested strategy fully merged the merits of sol‐gel derived inorganic‐organic composite film and the nano‐Au intermediator. The silica sol‐gel/alginate hybrid material can improve the properties of conventional sol‐gel material and effectively prevent cracking of film. The entrapment of HRP in the form of HRP‐nano‐Au can not only factually prevent the leaking of enzyme out of the film but also provide a favorable microenvironment for HRP. With hydroquinone as an electron mediator, the proposed HRP electrode exhibited good catalytic activity for the reduction of H₂O₂. The parameters affecting both the qualities of sol‐gel/alginate hybrid film and the biosensor response were optimized. The biosensor exhibited high sensitivity of 0.40 Al mol^?1 cm^?2 for H₂O₂ over a wide linear range of concentration from 1.22×10^?5 to 1.46×10^?3 mol L^?1, rapid response of <5 s and a detection limit of 0.61×10^?6 mol L^?1. The enzyme electrode has remarkable stability and retained 86% of its initial activity after 45 days of storage in 0.1 mol L^?1 Tris‐HCl buffer solutions at pH 7.     

硼铈共掺杂纳米TiO2光催化降解三氯杀螨醇和菊酯类农药

采用溶胶-凝胶法在钛酸丁酯水解过程引入硼酸、硝酸铈,制备具有光催化活性的硼铈共掺杂纳米二氧化钛（TiO2）,经XRD、TEM、FT-IR、UV-Vis-DRS表征晶体结构,在日光灯照射下,光催化降解三氯杀螨醇、高氟氯氰菊酯、氟戊菊酯农药。结果表明：硼铈共掺杂的TiO2只有锐钛矿型,而纯的或掺铈的TiO2有含有锐钛矿型、金红石相和少量板钛矿型,UV-Vis-DRS测定结果表明硼铈共掺杂的TiO2禁带宽度变小,硼铈共掺杂的TiO2在可见光区吸光度高于掺杂铈和不掺杂的TiO2,在420nm~850nm有强的吸收;在同样光照下对三氯杀螨醇、高氟氯氰菊酯、氟戊菊酯的降解试验证明硼铈共掺杂纳米TiO2的光催化活性高于不掺杂或只掺杂铈的TiO2。     

Characterization of a Marine Microbial Community Used for Enhanced Sulfate Reduction and Copper Precipitation in a Two-Step Process

Marine microorganisms that are obtained from hydrothermal vent sediments present a great metabolic potential for applications in environmental biotechnology. However, the work done regarding their applications in engineered systems is still scarce. Hence, in this work, the sulfate reduction process carried out by a marine microbial community in an upflow anaerobic sludge blanket (UASB) reactor was investigated for 190 days under sequential batch mode. The effects of 1000 to 5500 mg L^?1 of SO₄ ^?2 and the chemical oxygen demand (COD)/SO₄ ^?2 ratio were studied along with a kinetic characterization with lactate as the electron donor. Also, the feasibility of using the sulfide produced in the UASB for copper precipitation in a second column was studied under continuous mode. The system presented here is an alternative to sulfidogenesis, particularly when it is necessary to avoid toxicity to sulfide and competition with methanogens. The bioreactor performed better with relatively low concentrations of sulfate (up to 1100 mg L^?1) and COD/SO₄ ^?2 ratios between 1.4 and 3.6. Under the continuous regime, the biogenic sulfide was sufficient to precipitate copper at a removal rate of 234 mg L^?1 day^?1. Finally, the identification of the microorganisms in the sludge was carried out; some genera of microorganisms identified were Desulfitobacterium and Clostridium.     

Direct Electrochemistry of Hemoglobin on Vertically Aligned Carbon Hybrid TiO2 Nanotubes and Its Highly Sensitive Biosensor Performance

The present work is focused on developing a novel biomaterial platform to achieve enhanced direct electron transfer (DET) of hemoprotein and higher biosensor performance on vertically aligned carbon hybrid TiO₂ nanotubes (C‐TiO₂ NTs). Using a simple surfactant‐assisted method, controllable hybridization of TiO₂ NTs with conductive amorphous carbon species is realized. The obtained C‐TiO₂ NTs is ingeniously chosen to serve as an ideal "vessel" for protein immobilization and biosensor applications. Results show that the appropriate hybridization of C into TiO₂ NTs leads to a much better conductivity of TiO₂ NTs without destroying their preponderant tubular structures or damaging their excellent biocompatibility and hydrophilicity. When used in loading proteins, the C‐TiO₂ NTs can be used as a super vessel for rapid and substantive immobilization of hemoglobin (Hb), with a large surface electroactive Hb coverage ( Γ ??) of 3.3×10^?9 mol·cm^?2. Enhanced DET of Hb is commendably observed on the constructed Hb/C‐TiO₂ NTs biosensor with a couple of well‐defined redox peaks in a fast electron transfer process. The biosensor further exhibits fast response, high sensitivity and stability for the amperometric biosensing of H₂O₂ with the detection limit as low as 3.1×10^?8 mol/L.     

Determination of Sulfur Compounds in Water Samples by Ion Chromatography Dynamic Reaction Cell Inductively Coupled Plasma Mass Spectrometry

An ion chromatography‐inductively coupled plasma mass spectrometric (IC‐ICP‐MS) method for the speciation of sulfur compounds, namely sulfite [SO₃^2?], sulfate [SO₄^2?] and thiosulfate [S₂O₃^2?], was described. Ionic sulfur compounds were well separated in about 3 min by ion chromatography with a Hamilton PRP‐X100 column as the stationary phase and 60 mmol L^?1 NH₄NO₃ and 0.1% v/v formaldehyde (HCHO) solution (pH = 7) as the mobile phase. The analyses were carried out using dynamic reaction cell (DRC) ICP‐MS. The sulfur‐selective chromatogram was determined at m/z 48 as ³²S¹⁶O⁺ by using its reaction with O₂ in the reaction cell. The method avoided the effect of polyatomic isobaric interferences at m/z 32 caused by ¹⁶O¹⁶O⁺ and ¹⁴N¹⁸O⁺ on ³²S⁺ by detecting ³²S⁺ as the oxide ion ³²S¹⁶O⁺ at m/z 48, which is less interfered. The detection limit of various species studied was in the range of 3.6–4.6 ng S mL^?1. The accuracy of the method has been verified by comparing the sum of the concentrations of individual sulfur compounds obtained by the present procedure with the total concentration of sulfur in several natural water samples. The recovery was in the range of 97–102% for various compounds studied.     

TiO2纳米管阵列覆盖Si薄膜光催化还原CO2性能的研究

本工作采用CVD法在阳极氧化TiO2纳米管阵列膜表面沉积一层非晶Si膜,通过退火后得到晶化了的Si膜/TiO2纳米管阵列的复合结构,并初步就其光催化还原CO2制备碳氢化合物的活性进行研究。拉曼光谱(Raman)、X射线衍射(XRD)、场发射扫描电镜(FE-SEM)、高分辨透射电子显微镜(TEM)等微结构表征结果表明所制备的TiO2纳米管阵列的厚度为270 nm左右,管直径约为70 nm,管壁厚度约为16 nm。覆盖的Si膜已晶化,其厚度约为300 nm。通过高效液相色谱(HPLC)及总有机碳(TOC)来检测光催化还原液相产物中的甲酸及总有机碳含量,发现负载Si膜后的TiO2纳米管阵列光催化性能有所提高,在装有400cut滤光片氙灯照射2 h下TOC含量从21.2 mg.L-1增长到29.5 mg.L-1,表明Si与TiO2的复合可有效的提高光催化还原CO2的活性,这可能与该异质结结构可增加对光的吸收并且可降低光生空穴-电子对复合有关。光催化循环实验表明所制得的催化剂在循环5次后仍可保持91.6%的催化活性。