Perovskite barium zirconate titanate nanoparticles directly synthesized from solutions

Perovskite barium zirconate titanate nanoparticles (25–20 nm in diameter) were synthesized at low temperatures and under ambient pressure using titanium alkoxide, zirconium alkoxide and barium hydroxide as the starting materials. Microstructural analyses by X-ray diffraction and transmission electron microscopy indicated that the powders were nano-scaled, well crystallized, and had a perovskite phase. It is proposed that an acid–base neutralization reaction is the key mechanism behind the formation of such nanoparticles.     

Excess titanium in barium titanate nanoparticles directly synthesized from solution

The formation mechanism of excess titanium in BaTiO₃ nanoparticles is different from that in BaTiO₃ bulk materials. In this study, we analyzed the concentration of excess titanium in BaTiO₃ nanoparticles, which were directly synthesized from solution at 65 °C and it was found that it can reach an abnormal high concentration and keep the normal perovskite structure. The mechanism is discussed from the points of both defect chemistry and surface effect. The dielectric property of the ceramics fabricated from as-prepared nanoparticles with different concentration of excess titanium is also studied.     

Synthesis of transparent BaTiO<Subscript>3</Subscript> nanoparticle/polymer hybrid

Transparent BaTiO₃ nanoparticle/polymer hybrid was synthesized by polymerization and hydrolysis of barium titanium alkoxide modified with 2-vinyloxyethoxy ligand. Barium alkoxide, titanium alkoxide and 2-vinyloxyethanol were reacted affording a BaTiO₃ precursor, which was then hydrolyzed and polymerized to form BaTiO₃ particle/polymer hybrids below 100°C. BaTiO₃ particles increased in crystallinity with increasing water amount for hydrolysis. The absorption edge of the hybrid film on silica plates shifted to shorter wavelength with decreasing crystallite size. Nano-sized BaTiO₃ particle/polymer hybrid polymerized with methyl methacrylate (MMA) was shaped into a transparent and self-standing film with a refractive index of 1.595 at 589 nm.     

Optical properties of metal nanoparticles synthesized in a polymer by ion implantation: A review

Polymer composite layers irradiated by 30-keV Ag⁺ ions with doses from 3.1×10¹⁵ to 7.5×10¹⁶ cm^?2 and an ion current of 4 µA/cm² are investigated. The composites were examined using Rutherford backscattering (RBS), transmission electron microscopy (TEM), and optical spectroscopy. As follows from electron microscopy and electron microdiffraction data, ion implantation is a promising tool for synthesizing silver nanoparticles in the surface region. The optical density spectra taken of these composites demonstrate that the silver nanoparticles exhibit unusually weak plasma resonance. The formation of silver nanoparticles in layers carbonized by ion implantation is considered. Based on the Mie theory, optical extinction spectra for silver particles in the polymer and carbon matrices are simulated and optical spectra for complex silver core-carbon sheath nanoparticles are calculated. The physics behind the experimental optical spectra of the composite is discussed.     

Effect of gamma irradiation on hydrothermally synthesized barium titanate nanoparticles

The effect of gamma irradiation on hydrothermally synthesized BaTiO₃ nanoparticles has been investigated. Gamma irradiation was carried out at room temperature from 0, 50, 100, 150, 200?kGy to a maximum dose up to 250?kGy, source being ⁶⁰Co gamma radiations. The structure, size and chemical changes of the BaTiO₃ were studied using X-ray diffraction, Fourier-transform infrared spectrophotometry (FTIR) techniques and scanning electron microscopy (SEM). The optical band gap has been computed by UV–Visible spectroscopy data. From the results obtained, it is evident that the gamma irradiation increases the crystallinity, whereas the particle size of BaTiO₃ nanoparticles is altered. UV–Visible spectroscopy shows a noticeable change in the energy band gap due to gamma irradiation. Significant changes in anharmonicity constant computed using FTIR data due to irradiation has been observed. SEM shows the size and deviation from uniformity of particles.     

Dielectric properties of lead zirconate titanate films synthesized through oxidation of metal layers

Films of the composition Pb(Zr _x Ti_1?x )O₃ are prepared by magnetron sputtering of metal layers onto titanium substrates with subsequent heat treatment in an oxygen atmosphere. The electrical properties of the samples prepared are investigated using impedance spectroscopy in the frequency range from 10² to 5 × 10⁵ Hz at temperatures of 300–750 K. The temperature dependences of the permittivity and the dielectric loss tangent at different frequencies exhibit a behavior typical of ferroelectrics and indicate the occurrence of a ferroelectric phase transition at temperatures close to T = 663 K. Analysis of the imaginary part of the electric modulus has revealed two possible relaxation mechanisms. The activation energy for dc electrical conduction in the paraelectric phase is determined.     

掺杂钛酸钡薄膜的合成及性能研究

通过化学溶液沉积法制备的BiFeO3-BaTiO3薄膜在室温下能够同时显现铁电性及铁磁性。在600-700℃的条件下,以Pt/TiOx/SiO2/Si为载体,能够成功得到钙钛矿单相0.7BiFeO3-0.3BaTiO3薄膜。随着结晶温度上升,晶粒持续增长,最终在700℃到达更高的结晶度。由于0.7BiFeO3-0.3BaTiO3薄膜的绝缘电阻较低,它所显现的极化（P）-电场（E）磁滞回线较弱。尽管如此,由于在0.7BiFeO3-0.3BaTiO3薄膜铁的位置上添加锰,高作用场的漏电流有效地减少,最终铁电性质得到了提高。在室温下,添加了摩尔分数5%的锰的0.7BiFeO3-0.3BaTiO3薄膜同时显现铁电极化和铁磁磁化磁滞回线。     

掺杂钛酸钡薄膜的合成及性能研究

通过化学溶液沉积法制备的BiFeO3-BaTiO3薄膜在室温下能够同时显现铁电性及铁磁性。在600-700℃的条件下,以Pt/TiOx/SiO2/Si为载体,能够成功得到钙钛矿单相0.7BiFeO3-0.3BaTiO3薄膜。随着结晶温度上升,晶粒持续增长,最终在700℃到达更高的结晶度。由于0.7BiFeO3-0.3BaTiO3薄膜的绝缘电阻较低,它所显现的极化（P）-电场（E）磁滞回线较弱。尽管如此,由于在0.7BiFeO3-0.3BaTiO3薄膜铁的位置上添加锰,高作用场的漏电流有效地减少,最终铁电性质得到了提高。在室温下,添加了摩尔分数5%的锰的0.7BiFeO3-0.3BaTiO3薄膜同时显现铁电极化和铁磁磁化磁滞回线。     

掺杂钛酸钡薄膜的合成及性能研究

通过化学溶液沉积法制备的BiFeO3-BaTiO3薄膜在室温下能够同时显现铁电性及铁磁性。在600-700℃的条件下,以Pt/TiOx/SiO2/Si为载体,能够成功得到钙钛矿单相0.7BiFeO3-0.3BaTiO3薄膜。随着结晶温度上升,晶粒持续增长,最终在700℃到达更高的结晶度。由于0.7BiFeO3-0.3BaTiO3薄膜的绝缘电阻较低,它所显现的极化（P）-电场（E）磁滞回线较弱。尽管如此,由于在0.7BiFeO3-0.3BaTiO3薄膜铁的位置上添加锰,高作用场的漏电流有效地减少,最终铁电性质得到了提高。在室温下,添加了摩尔分数5%的锰的0.7BiFeO3-0.3BaTiO3薄膜同时显现铁电极化和铁磁磁化磁滞回线。     

Ferroid properties and domain structure of barium titanate

Distinctive features of domain formation in ferroelectric crystals are discussed theoretically for the example of ferroelectric BaTiO₃, taking into account ferroid properties of higher order. Inclusion of ferroid properties makes it possible to refine the details of the domain formation, and in particular to explain the possible existence of charged domain walls in ferroelectric crystals. Fiz. Tverd. Tela (St. Petersburg) 39, 1634–1635 (September 1997)     

Synthesis of transparent BaTiO3 nanoparticle/polymer composite film using DC field

Transparent BaTiO₃ nanoparticle/polymer composite films were synthesized from titanium-organic film and barium ion in aqueous solution under direct current (DC) field. Titanium-organic precursor was synthesized from titanium isopropoxide, acetylacetone and methacrylate derivative. The UV treatment was effective to increase the anti-solubility of the titanium-organic film during DC processing. BaTiO₃ nanoparticles were crystallized in the precursor films on stainless substrates without high temperature process, as low as 40°C. The crystallite size of BaTiO₃ increased with increasing reaction temperature from 40 to 50 °C at 3.0 V/cm. BaTiO₃ nanoparticles also grew in size with increasing reaction time from 15 min to 45 min at 3.0 V/cm and 50 °C. Transparent BaTiO₃ nanoparticle/polymer films were synthesized on stainless substrates at 3.0 V/cm and 50°C for 45 min.     

Optical properties of Er/Yb-codoped transparent PLZT ceramic

Optical absorption and emission spectra of Er³⁺/Yb³⁺ ions in PLZT (Pb_1−xLa_xZr_yTi_1−yO₃) ceramic have been studied. Based on the Judd—Ofelt (J-O) theory, the J-O intensity parameters were calculated to be Ω₂=2.021×10⁻²⁰ cm², Ω₄=0.423×10⁻²⁰ cm², Ω₆=0.051×10⁻²⁰ cm² from the absorption spectrum of Er³⁺/Yb³⁺-codoped PLZT. The J-O intensity parameters have been used to calculate the radiative lifetimes and the branching ratios for some excited ⁴I_13/2, ⁴I_11/2, ⁴I_9/2⁴F_9/2, and ⁴S_3/2 levels of Er³⁺ ion. The stimulated emission cross-section (8.24×10⁻²¹ cm²) was evaluated for the ⁴I_13/2→⁴I_15/2 transition of Er³⁺. The upconversion emissions at 538, 564, and 666 nm have been observed in Er³⁺/Yb³⁺-codoped PLZT by exciting at 980 nm, and their origins were identified and analyzed.     

Dielectric properties of thin sections of barium titanate ceramics

Thin sections in the thickness range down to 3–5 μm were produced from bariumtitanate ferroelectric ceramics. The small signal dielectric constant, as well as hysteresis loops were measured. Significant deviations from the bulk properties were observed, when the thickness of the sample was decreased to the average diameter of the grains. The measured results are discussed proposing a model with internal stresses and a distorted surface layer.     

Improving electret properties of PP filaments with barium titanate

Barium titanate (BaTiO₃) containing polypropylene (PP) composite filaments were melt spun to modify polymer electrostatic charging characteristics. Sample filaments were charged with a corona instrument and their surface potentials were measured. Initial surface potential as well as potential stability was monitored through an accelerated decay procedure. It was found that both BaTiO₃ concentration and charging temperature influence the charging characteristics of the fibers. When BaTiO₃/PP composite filaments were charged at 130 °C, significant enhancements were observed when compared to samples charged at room temperature. The distribution of BaTiO₃ particles within the filaments and changes in the crystal structure were also examined.     

Preparation and optical properties of barium titanate thin films

Barium titanate (BTO) films were prepared by sol-gel spin-coating technique. The crystal structure and optical properties of BTO films have been investigated. The results indicate that the BTO films are single perovskite phase having tetragonal symmetry. The band gap of the BTO films increases with the increasing of layer number and decreasing of solution concentration. The transmittance and band gap of the BTO films annealed at 900 °C is more than that of the BTO films annealed at 700 °C when wavelength is 200-1000 nm. When wavelength is 400-1000 nm, the absorption coefficient α obtained by experiment is higher than that obtained by calculation (close to zero).     

Structural and magnetic properties of single-crystalline Co-doped barium titanate nanoparticles

Undoped and Co-doped BaTiO₃ nanoparticles were synthesized by a one-step sol-precipitation method. For all the samples, X-ray diffraction showed characteristic diffraction lines for BaTiO₃ without the indication of secondary phases. High-resolution transition electron microscopy images showed that BaTiO₃ nanoparticles exhibit the nature of single-crystal. Magnetometry revealed that all the Co-doped BaTiO₃ samples show paramagnetic behaviors and Co ions in BaTiO₃ are present as isolated paramagnetic centers. This is contrasted to several reported cases of ferromagnetism in Co-doped BaTiO₃.     

Mesoporous TiO2-B nanowires synthesized from tetrabutyl titanate

Ultralong mesoporous TiO₂-B nanowires were synthesized via a hybrid hydrothermal-ion exchanging-thermal treatment using tetrabutyl titanate (TBOT) as a raw material. The phase transformations and porous structures of TiO₂-B nanowires were characterized and studied by X-ray diffraction (XRD), transmission electron microscopy (TEM) and N₂ adsorption-desorption measurement. Mesoporous TiO₂-B nanowires showed a length of several micrometers and diameter of about 25 nm. The porous structures of obtained TiO₂-B nanowires were demonstrated by BJH pore distribution measurement. The wirelike morphologies and porous structures of monodisperse nanowires calcined at 600 °C showed little change, which indicated that such nanowires possessed high thermal stability. The formation mechanism of TiO₂-B nanowires with mesoporous structures were also discussed based on our experimental results.     

Optical properties of lithium barium haloborate glasses

Lithium haloborate glasses have been prepared according to the formula (70−y)B₂O₃-30BaF2-yLiX where y=0, 5, 10, 15 and 20 mol% and X=F, Cl and Br. The UV absorption spectra have been recorded at room temperature. The optical energy band gap E_opt and Urbach energy E_tail was determined. Increasing concentration of LiX in the glass shifts the UV cutoff to lower energy and decreases both E_opt and E_tail. The shift in UV cutoff and the decrease of E_opt and E_tail are maximum in the range 0-5 mol% LiX. The decrease of E_opt increases going from F, Cl to Br, whereas the decrease of E_tail increases going from Br, Cl to F. At higher LiX concentrations Urbach energy E_tail increases again. The behavior of E_opt has been correlated with the B-O bond length of the studied glasses. The decrease of E_opt and E_tail is due to the increase of nonbridging oxygen (NBO) concentration with increase of LiX content. The increase of E_tail at higher concentrations is attributed to the halide ion accumulation in the interstitial positions and to the formation of orthoborate groups. Refractive index, which is measured and calculated, molar refraction and polarizability are all correlated with the composition of the glasses.