Phosphoryl group differentiating α‐amino acids from β‐ and γ‐amino acids in prebiotic peptide formation

In recent years β‐amino acids have increased their importance enormously in defining secondary structures of β‐peptides. Interest in β‐amino acids raises the question: Why and how did nature choose α‐amino acids for the central role in life? In this article we present experimental results of MS and ³¹P NMR methods on the chemical behavior of N‐phosphorylated α‐alanine, β‐alanine, and γ‐amino butyric acid in different solvents. N‐Phosphoryl α‐alanine can self‐assemble to N‐phosphopeptides either in water or in organic solvents, while no assembly was observed for β‐ or γ‐amino acids. An intramolecular carboxylic–phosphoric mixed anhydride (IMCPA) is the key structure responsible for their chemical behaviors. Relative energies and solvent effects of three isomers of IMCPA derived from α‐alanine (2a–c), with five‐membered ring, and five isomers of IMCPA derived from β‐alanine (4a–e), with six‐membered ring, were calculated with density functional theory at the B3LYP/6‐31G** level. The lower relative energy (3.2 kcal/mol in water) of 2b and lower energy barrier for its formation (16.7 kcal/mol in water) are responsible for the peptide formation from N‐phosphoryl α‐alanine. Both experimental and theoretical studies indicate that the structural difference among α‐, β‐, and γ‐amino acids can be recognized by formation of IMCPA after N‐phosphorylation. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 94: 232–241, 2003     

Solid‐state conformations of linear depsipeptide amides with an alternating sequence of α,α‐disubstituted α‐amino acid and α‐hydroxy acid

Depsipeptides and cyclodepsipeptides are analogues of the corresponding peptides in which one or more amide groups are replaced by ester functions. Reports of crystal structures of linear depsipeptides are rare. The crystal structures and conformational analyses of four depsipeptides with an alternating sequence of an α,α‐disubstituted α‐amino acid and an α‐hydroxy acid are reported. The molecules in the linear hexadepsipeptide amide in (S)‐Pms‐Acp‐(S)‐Pms‐Acp‐(S)‐Pms‐Acp‐NMe₂ acetonitrile solvate, C₄₇H₅₈N₄O₉·C₂H₃N, ( 3b ), as well as in the related linear tetradepsipeptide amide (S)‐Pms‐Aib‐(S)‐Pms‐Aib‐NMe₂, C₂₈H₃₇N₃O₆, ( 5a ), the diastereoisomeric mixture (S,R)‐Pms‐Acp‐(R,S)‐Pms‐Acp‐NMe₂/(R,S)‐Pms‐Acp‐(R,S)‐Pms‐Acp‐NMe₂ (1:1), C₃₂H₄₁N₃O₆, ( 5b ), and (R,S)‐Mns‐Acp‐(S,R)‐Mns‐Acp‐NMe₂, C₃₀H₃₇N₃O₆, ( 5c ) (Pms is phenyllactic acid, Acp is 1‐aminocyclopentanecarboxylic acid and Mns is mandelic acid), generally adopt a β‐turn conformation in the solid state, which is stabilized by intramolecular N—H…O hydrogen bonds. Whereas β‐turns of type I (or I′) are formed in the cases of ( 3b ), ( 5a ) and ( 5b ), which contain phenyllactic acid, the torsion angles for ( 5c ), which incorporates mandelic acid, indicate a β‐turn in between type I and type III. Intermolecular N—H…O and O—H…O hydrogen bonds link the molecules of ( 3a ) and ( 5b ) into extended chains, and those of ( 5a ) and ( 5c ) into two‐dimensional networks.     

A novel type of optically active helical polymers: Synthesis and characterization of poly(α,β‐unsaturated ketone)

New α,β‐unsaturated ketone monomers, menthyl vinyl ketone (MVK), and 1‐menthylbut‐3‐en‐2‐one (MBEK) were synthesized. The monomers were polymerized using butyllithium as an initiator. The polymer derived from MVK (poly‐MVK) had a tremendous specific optical rotation [α], which was as 32 times large as that of its monomer MVK. Poly‐MVK was confirmed to keep a prevailing helicity of backbone in solution by means of comparing the specific optical rotation and the CD spectra with that of MVK and the model compound such as ethyl menthyl ketone (EMK) and n‐hexyl menthyl ketone (n‐HMK). This conclusion was also confirmed by the fact that the specific optical rotation and the CD signal intensity of poly‐MBEK were not enough large due to backbone flexibility caused by the effective isolation of the main chain from the bulky menthyl. The excess value of one‐handed helicity of poly‐MVK decreased with the increase of polymerization temperature. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1441–1448, 2010     

Four oxoindole‐linked α‐alkoxy‐β‐amino acid derivatives

Four structures of oxoindolyl α‐hydroxy‐β‐amino acid derivatives, namely, methyl 2‐{3‐[(tert‐butoxycarbonyl)amino]‐1‐methyl‐2‐oxoindolin‐3‐yl}‐2‐methoxy‐2‐phenylacetate, C₂₄H₂₈N₂O₆, (I), methyl 2‐{3‐[(tert‐butoxycarbonyl)amino]‐1‐methyl‐2‐oxoindolin‐3‐yl}‐2‐ethoxy‐2‐phenylacetate, C₂₅H₃₀N₂O₆, (II), methyl 2‐{3‐[(tert‐butoxycarbonyl)amino]‐1‐methyl‐2‐oxoindolin‐3‐yl}‐2‐[(4‐methoxybenzyl)oxy]‐2‐phenylacetate, C₃₁H₃₄N₂O₇, (III), and methyl 2‐[(anthracen‐9‐yl)methoxy]‐2‐{3‐[(tert‐butoxycarbonyl)amino]‐1‐methyl‐2‐oxoindolin‐3‐yl}‐2‐phenylacetate, C₃₈H₃₆N₂O₆, (IV), have been determined. The diastereoselectivity of the chemical reaction involving α‐diazoesters and isatin imines in the presence of benzyl alcohol is confirmed through the relative configuration of the two stereogenic centres. In esters (I) and (III), the amide group adopts an anti conformation, whereas the conformation is syn in esters (II) and (IV). Nevertheless, the amide group forms intramolecular N—H...O hydrogen bonds with the ester and ether O atoms in all four structures. The ether‐linked substituents are in the extended conformation in all four structures. Ester (II) is dominated by intermolecular N—H...O hydrogen‐bond interactions. In contrast, the remaining three structures are sustained by C—H...O hydrogen‐bond interactions.     

Palladium‐catalyzed cyclization of β‐bromo‐α,β‐unsaturated ketones with arylhydrazines leading to 3‐substituted 1‐aryl‐1 H‐pyrazoles

β‐Bromo‐α,β‐unsaturated ketones are condensed with arylhydrazines to form hydrazones, which are in situ intramolecularly cyclized into 3‐substituted 1‐aryl‐1 H‐pyrazoles under a catalytic system of Pd(OAc)₂/1,3‐bis(diphenylhosphino)propane (dppp)/NaO^tBu. Copyright © 2012 John Wiley & Sons, Ltd.     

Helical Poly(α,β‐unsaturated ketone) with Bulky Pendant of Binaphthyl from Anionic Polymerization of ((−)‐Menthyl (S)‐6′‐Acrylyl‐2′‐methyloxy‐1,1′‐binaphthalene‐2‐carboxylate

((?)‐Menthyl (S)‐6′‐acrylyl‐2′‐methyloxy‐1,1′‐binaphthalene‐2‐carboxylate ( 3 ) was synthesized and anionically polymerized using n‐BuLi as an initiator in toluene. The monomer 3 was levorotatory and had an [α]_D²⁵ value of ?72.4, but its corresponding polymer poly‐ 3 was dextrorotatory and showed an [α]_D²⁵ value of +162.0. Poly‐ 3 was confirmed to exist in the form of one‐handed helical structure in solution by means of comparing the specific optical rotation and the CD spectra with that of 3 and the model compounds such as (?)‐menthyl (S)‐6′‐propionyl‐2′‐methyloxy‐1,1′‐binaphthalene‐2‐carboxylate 2b and (?)‐menthyl (S)‐6′‐heptanoyl‐2′‐methyloxy‐1,1′‐binaphthalene‐2‐carboxylate 2c . This conclusion was also confirmed by the fact that the g‐value of poly‐ 3 is about 11 times of that of monomer 3 .     

Synthesis of Phenanthrene Derivatives through the Reaction of an α,α‐Dicyanoolefin with α,β‐Unsaturated Carbonyl Compounds

Phenanthrene derivatives were prepared by reacting an α,α‐dicyanoolefin with different α,β‐unsaturated carbonyl compounds resulting from Wittig reaction of ninhydrin and phosphanylidene or condensation of barbituric acid and an aldehyde. The easy procedure, mild and metal‐catalyst free, reaction conditions, good yields, and no need for chromatographic purifications are important features of this protocol. The structures of the product of type 3 and 5 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS). A plausible mechanism for this type of reaction is proposed (Scheme 1).     

The Renaissance of α‐Methylene‐γ‐butyrolactones: New Synthetic Approaches

The amount of research activity concerning α‐methylene‐γ‐butyrolactones and α‐alkylidene‐γ‐butyrolactones has increased dramatically in recent years. This Review summarizes the structural types, biological activities, and biosynthesis of these compounds, concentrating on publications from the past 10 years. Traditional approaches to α‐methylene‐γ‐butyrolactones and α‐alkylidene‐γ‐butyrolactones are then reviewed together with novel approaches, including those from our own research group, reported more recently.     

CuI/amino acid catalysis in coupling and cyclization of β‐bromo‐α,β‐unsaturated carboxylic acids with terminal alkynes leading to alkylidenefuranones

β‐Bromo‐α,β‐unsaturated carboxylic acids are coupled and cyclized with terminal alkynes in DMF at 110°C in the presence of a catalytic amount of CuI and amino acid along with a base to give alkylidenefuranones in good yields. Similar reaction under microwave irradiation also gave alkylidenefuranones in higher yields. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of Halogenated α,β‐Unsaturated γ‐Butyrolactone Derivatives by Triphenylphosphine‐Catalyzed Cyclization of α‐Halogeno Ketones with Dialkyl Acetylenedicarboxylates (=Dialkyl But‐2‐ynedioates)

A Ph₃P‐catalyzed cyclization of α‐halogeno ketones 2 with dialkyl acetylenedicarboxylates (=dialkyl but‐2‐ynedioates) 3 produced halogenated α,β‐unsaturated γ‐butyrolactone derivatives 4 in good yields (Scheme 1, Table). The presence of electron‐withdrawing groups such as halogen atoms at the α‐position of the ketones was necessary in this reaction. Cyclization of α‐chloro ketones resulted in higher yields than that of the corresponding α‐bromo ketones. Dihalogeno ketones similarly afforded the expected γ‐butyrolactone derivatives in high yields.     

Studies on the Mass Spectra of N‐Aryl α,β‐Unsaturated γ‐Lactams

The mass spectra of a series of N‐aryl α,β‐unsaturated γ‐lactams were studied. Besides the molecular ion, the three characteristic fragments such as [M⁺‐29], [M⁺‐55], and [M⁺‐82] were commonly found in a series of N‐Aryl α,β‐unsaturated γ‐lactams in EI/MS. Further more the mechanism for the interpretation of these fragments is also de scribed.     

Comparison of Methionine α,γ‐Lyase and Homocysteine α,γ‐Lyase for Electrochemical Determination of Homocysteine

Recently, a novel enzymatic method was developed for determination of homocysteine. This method utilizes the electrochemical hydrogen sulfide sensor along with methionine α,γ‐lyase to accomplish the fast, accurate, sensitive and selective measurements. As a continuation of this work, another enzyme, homocysteine α,γ‐lyase, was used and the parallel experiments of using both enzymes were carried out against the effect of pH, sensitivity, linearity, and interferences, in an intended comparison between these two enzymes. The excellent linearity of amperometric currents against homocysteine concentrations, high sensitivities and low detection limits for both enzymes reconfirmed that the electrochemical method is superior over other analytical means. The high enzymatic activity of methionine α,γ‐lyase surpassing homocysteine α,γ‐lyase endowed the former higher sensitivity, lower detection limit and faster response than the latter, suggesting methionine α,γ‐lyase a better candidate for homocysteine measurement by electrochemical method. The differences between these two enzymes on the trends of response time and sensitivity at different pH environments, reactivity toward several forms of homocysteine as well as on the interference from several agents were also addressed and discussed.     

Synthesis of new optically active α,α′,β‐trisubstituted‐β‐lactones as monomers for stereoregular biopolyesters

Various optically active (4R)‐alkyloxycarbonyl‐3,3‐dialkyl‐2‐oxetanones as monomers were synthesized from L‐(S)‐malic acid in six steps to prepare a new family of stereopolyesters for biomedical applications. The synthesis began with an esterification followed of a dialkylation in the aim to introduce hydrophobic groups as methyl or reactive group as allyl. Then, a saponification has permitted to obtain the corresponding diacids that reacted with appropriate alcohols to furnish different monoesters. The last and most important step was activation of hydroxyl group of monoesters with the asymmetric carbon configuration inversion according to the Mitsunobu reaction. Thus, this reaction has provided lactones from monoesters with 100% enantiomeric excess which was confirmed by ¹H NMR and by the synthesis of corresponding isotactic and semicrystalline homopolyesters. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2586–2597     

Imidazole‐initiated polymerizations of α‐amino acid N‐carboxyanhydrides – simultaneous chain‐growth and step‐growth polymerization

The N‐carboxyanhydrides (NCAs) of sarcosine (Sar), D ,L ‐leucine (D ,L ‐Leu), D ,L ‐phenylalanine (D ,L ‐Phe), and L ‐alanine (L ‐Ala) were polymerized in dioxane. Imidazole served as initiator and the NCA/initiator ratio was varied from 1/1 to 40/1. The isolated polypeptides were characterized by ¹H NMR spectroscopy, by MALDI‐TOF mass spectrometry, by viscosity measurements, and by SEC measurements in the case of poly(sarcosine). Cyclic oligopeptides were found in all reaction products and in the case of polySar, poly(D ,L ‐Leu), and poly(D ,L ‐Phe) the cycles were the main products. In the case of poly(L ‐Ala), rapid precipitation of β‐sheet lamellaes prevented efficient cyclizations and stabilized imidazolide endgroups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5690–5698, 2005     

CuI/amino acid‐catalyzed coupling and cyclization of β‐bromo‐α,β‐unsaturated amides with terminal alkynes leading to (3Z)‐3‐alkylidenepyrrol‐1‐ones

β‐Bromo‐α,β‐unsaturated amides are coupled and cyclized with terminal alkynes in DMF at 110 °C in the presence of a catalytic amount of CuI and amino acid along with a base to give the corresponding (3Z)‐3‐alkylidenepyrrol‐1‐ones in moderate to good yields. Copyright © 2013 John Wiley & Sons, Ltd.     

Chemical synthesis of poly‐γ‐glutamic acid by polycondensation of γ‐glutamic acid dimer: Synthesis and reaction of poly‐γ‐glutamic acid methyl ester

α‐Methyl glutamic acid (L ‐L )‐, (L ‐D )‐, (D ‐L )‐, and (D ‐D )‐γ‐dimers were synthesized from L ‐ and D ‐glutamic acids, and the obtained dimers were subjected to polycondensation with 1‐(3‐dimethylaminopropyl)‐3‐ethylcarbodiimide hydrochloride and 1‐hydroxybenzotriazole hydrate as condensation reagents. Poly‐γ‐glutamic acid (γ‐PGA) methyl ester with the number‐average molecular weights of 5000∼20,000 were obtained by polycondensation in N,N‐dimethylformamide in 44∼91% yields. The polycondensation of (L ‐L )‐ and (D ‐D )‐dimers afforded the polymers with much larger |[α]_D | compared with the corresponding dimers. The polymer could be transformed into γ‐PGA by alkaline hydrolysis or transesterification into α‐benzyl ester followed by hydrogenation. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 732–741, 2001     

Characterisation of interferon α‐2b by liquid chromatography and mass spectrometry techniques

Interferon α‐2b produced by Escherichia coli consists of 165 amino acids and contains two disulphide bonds; its purity was confirmed by LC‐UV (DAD)‐FLD and LC‐MS techniques. A C₄ column was used with UV detection at 214 nm; diode array detector (DAD) spectra were recorded from 200–400 nm and fluorescence detection was performed at specific wavelengths of trypthophan emission and excitation. Peptide mapping was performed with trypsin. Peptides produced by trypsin digestion were analysed by LC‐UV (DAD)‐FLD, LC‐MS, and LC‐MS/MS using a C₁₈ column. Amino acid sequence coverage was about 95%. UV spectra in the range from 200 nm to 400 nm, emission (Em) and excitation (Ex) spectra of each separated peptide were additionally compared with spectra of the same peptide produced by digestion of European Pharmacopaeia interferon α‐2b standard (spectral matching). The chromatogram of any interferon α‐2b (drug substance or certificated standard) sample produced in the same manner with the same amino acid composition should be similar to the chromatogram obtained by the method described in this paper. Molecular masses of peptides were obtained from MS experiments and MS/MS experiments gave additional structural information. The molecular mass of interferon α‐2b was obtained by MALDI‐TOF MS analysis in linear mode, with an accuracy comparable to the theoretical average mass ± 5 atomic mass units. The molecular mass was obtained from the deconvoluted ESI mass spectrum.