The Suzuki–Miyaura coupling polymerization of dibromoarene 1 and arylenediboronic acid (ester) 2 with a Pd catalyst having a high propensity for intramolecular catalyst transfer is reported. The polymerization of excess 1 with 2 affords high‐molecular‐weight π‐conjugated polymer having boronic acid (ester) moieties at both ends, contrary to Flory's principle. This unstoichiometric polycondensation behavior is accounted for by intramolecular transfer of the Pd catalyst on 1 . In the polymerization of 1 and 2 having different aryl residues, high‐molecular‐weight polymer is obtained when the stronger donor aromatic is used as the dibromo monomer and the weaker donor or acceptor aromatic is used as diboronic acid (ester) monomer. The pinacol boronate moieties at both ends of the obtained poly(p‐phenylene) (PPP) can be converted to benzoic acid ester, hydroxyl group, and bromine. Furthermore, the reaction of the pinacol boronate‐terminated PPP with poly(3‐hexylthiophene) (P3HT) having bromine at one end yields a triblock copolymer of P3HT‐b‐PPP‐b‐P3HT.
Well‐defined poly(2,5‐dihexyloxyphenylene‐1,4‐diyl) (PPP) is successfully synthesized by the Negishi catalyst‐transfer polycondensation (NCTP) using dilithium tetra(tert‐butyl)zincate (tBu4ZnLi2). The obtained PPP possesses the number‐averaged molecular weight (M n) values in the range of 2100–22 000 and the molar‐mass dispersity (Ð M) values in the range of 1.09–1.23. In addition, block copolymers containing PPP and poly(3‐hexylthiophene) (P3HT) segments (PPP‐b‐P3HT) are synthesized to confirm the feasibility of chain extension between the different monomers based on NCTP.
Poly(3‐hexylthiophene) (P3HT) supramolecular structures are fabricated on P3HT‐dispersed reduced graphene oxide (RGO) monolayers and surfactant‐free RGO monolayers. P3HT is able to disperse RGO in hot anisole/N,N‐dimethylformamide solvents, and forms nanowires on RGO surfaces through a RGO induced crystallization process. The TEM and AFM investigation of the resultant P3HT/RGO composites shows that P3HT nanowires grow from RGO, and connect individual RGO monolayers. Raman spectroscopy confirms the interaction between P3HT and RGO, which allows the manipulation of the RGO electrical properties. Such a bottom‐up approach provides interesting graphene‐based composites for nanometer‐scale electronics.
For the assessment of diets and supplements formulated for the treatment of phenylketonuria, a highly sensitive and selective method was developed and validated for the quantification of dopamine (DA), serotonin (5‐HT), 3,4‐dihydroxyphenylacetic acid (DOPAC), 5‐hydroxyindoleacetic acid (5‐HIAA), phenylalanine, tyrosine and tryptophan in mouse cerebellum, brain stem, hypothalamus, parietal cortex, anterior piriform cortex and bulbus olfactorius. Samples were extracted by deproteinization with acetonitrile, and the extracts were cleaned up by strong anion exchange and weak cation exchange applied sequentially. The substances were detected by rapid liquid chromatography tandem mass spectrometry. Matrix components were largely removed by the clean‐up, resulting in low matrix effects. The lower limits of quantification for an extracted tissue mass of 100 mg were 0.3, 0.3, 0.2 and 2 ng/g for DA, 5‐HT, 5‐HIAA and DOPAC, respectively. The mean true extraction recoveries were 80–102%. The relative intra‐laboratory reproducibility standard deviations were generally <11% at concentrations of 20–1000 ng/g for DA, 5‐HT, 5‐HIAA and DOPAC and 7% at concentrations of 5–50 μg/g for the amino acids. This method was successfully used in a phenylketonuria mice study including nearly 300 brain tissue samples and for small sample masses (for example, 2 mg of bulbus olfactorius). 相似文献
The stannides ErAgSn and TmAgSn have been investigated under high‐temperature (HT) and high‐pressure (HP) conditions in order to investigate their structural chemistry. ErAgSn and TmAgSn are dimorphic: normal‐pressure (NP) ErAgSn and HT‐TmAgSn crystallize into the NdPtSb type structure, P63mc, a = 466.3(1), c = 729.0(2) pm for NP‐ErAgSn and a = 465.4(1), c = 726.6(2) pm for HT‐TmAgSn. NP‐ErAgSn was obtained via arc‐melting of the elements and subsequent annealing at 970 K, while HT‐TmAgSn crystallized directly from the melt by rapidly quenching the arc‐melted sample. HT‐TmAgSn transforms to the ZrNiAl type low‐temperature modification upon annealing at 970 K. The high‐pressure (HP) modification of ErAgSn was synthesized under multianvil high‐pressure (11.5 GPa) high‐temperature (1420 K) conditions from NP‐ErAgSn: ZrNiAl type, , a = 728.7(2), c = 445.6(1) pm. The silver and tin atoms in NP‐ErAgSn and HT‐TmAgSn build up two‐dimensional, puckered [Ag3Sn3] networks (277 pm intralayer Ag–Sn distance in NP‐ErAgSn) that are charge‐balanced and separated by the erbium and thulium atoms. The fourth neighbor in the adjacent layer has a longer Ag–Sn distance of 298 pm. The [AgSn] network in HP‐ErAgSn is three‐dimensional. Each silver atom has four tin neighbors (281–285 pm Ag–Sn). The [AgSn] network leaves distorted hexagonal channels, which are filled with the erbium atoms. The crystal chemistry of the three phases is discussed. 相似文献
Flow injection analysis with amperometric detection (FIA‐AD) at screen‐printed carbon electrodes (SPCEs) in optimum medium of Britton‐Robinson buffer (0.04 mol ? L?1, pH 2.0) was used for the determination of three tumor biomarkers (homovanillic acid (HVA), vanillylmandelic acid (VMA), and 5‐hydroxyindole‐3‐acetic acid (5‐HIAA)). Dependences of the peak current on the concentration of biomarkers were linear in the whole tested concentration range from 0.05 to 100 μmol ? L?1, with limits of detection (LODs) of 0.065 μmol ? L?1 for HVA, 0.053 μmol ? L?1 for VMA, and 0.033 μmol ? L?1 for 5‐HIAA (calculated from peak heights), and 0.024 μmol ? L?1 for HVA, 0.020 μmol ? L?1 for VMA, and 0.012 μmol ? L?1 for 5‐HIAA (calculated from peak areas), respectively. 相似文献
Studies of 2‐(1H‐pyrazol‐5‐yl)pyridine (PPP) and its derivatives 2‐(4‐methyl‐1H‐pyrazol‐5‐yl)pyridine (MPP) and 2‐(3‐bromo‐1H‐pyrazol‐5‐yl)pyridine (BPP) by stationary and time‐resolved UV/Vis spectroscopic methods, and quantum chemical computations show that this class of compounds provides a rare example of molecules that exhibit three types of photoreactions: 1) excited‐state intramolecular proton transfer (ESIPT) in the syn form of MPP, 2) excited‐state intermolecular double‐proton transfer (ESDPT) in the dimers of PPP in nonpolar media, as well as 3) solvent‐assisted double‐proton transfer in hydrogen‐bonded 1:1 complexes of PPP and MPP with alcoholic partners. The excited‐state processes are manifested by the appearance of a dual luminescence and a bimodal irreversible kinetic coupling of the two fluorescence bands. Ground‐state syn–anti equilibria are detected and discussed. The fraction of the higher‐energy anti form varies for different derivatives and is strongly dependent on the solvent polarity and hydrogen‐bond donor or acceptor abilities. 相似文献
Summary: Nanowire lengths and length‐to‐width aspect ratios in regioregular poly(3‐hexylthiophene) (P3HT) were simply controlled through changes in the solvent vapor pressure during solidification. It is demonstrated that the nanowires grew by rod‐to‐rod association, in which the molecular long axis of the P3HT chains appeared to be well‐oriented parallel to the silicon substrate (Si/SiOx). The formation of the nanowires took place by one dimensional self‐assembly, governed by π‐π stacking of the P3HT units.
TEM high contrast images showing P3HT nanowires fabricated by spin‐coating under a solvent vapor pressure. 相似文献
Poly(3‐hexylthiophene)‐b‐poly(γ‐benzyl‐L ‐glutamate) (P3HT‐b‐PBLG) rod–rod diblock copolymer was synthesized by a ring‐opening polymerization of γ‐benzyl‐L ‐glutamate‐N‐carboxyanhydride using a benzylamine‐terminated regioregular P3HT macroinitiator. The opto‐electronic properties of the diblock copolymer have been investigated. The P3HT precursor and the P3HT‐b‐PBLG have similar UV–Vis spectra both in solution and solid state, indicating that the presence of PBLG block does not decrease the effective conjugation length of the semiconducting polythiophene segment. The copolymer displays solvatochromic behavior in THF/water mixtures. The morphology of the diblock copolymer depends upon the solvent used for film casting and annealing results in morphological changes for both films deposited from chloroform and trichlorobenzene.
Novel fullerene‐grafted poly(3‐hexylthiophene) (P3HT)‐based rod‐coil block copolymers have been synthesized. The regioregular P3HT rod block has been synthesized by a modified Grignard metathesis reaction (GRIM). An original in situ end‐capping reaction has been developed in order to convert the P3HT block into an efficient macro‐initiator for the nitroxide‐mediated radical polymerization (NMRP) of the coil block. Controlled radical polymerization of the second poly(butylacrylate‐stat‐chloromethylstyrene) [P(BA‐stat‐CMS)] block has been done through various conditions leading to different coil block lengths. The final electron donor‐acceptor block copolymer has been obtained after C60 grafting in soft conditions. Copolymers have been characterized by 1H NMR and size exclusion chromatography. Optical characterizations, before and after C60 grafting, are reported.
A rod‐coil block copolymer consisting of poly(3‐hexylthiophene) (P3HT) and poly(N‐vinylcarbazole) (PVK) ( P3HT‐ b ‐PVK ) in a single molecular architecture is prepared as the first example for WOLEDs. By obtaining the phase separated domains in thin film of the resulting block copolymer, it is possible to suppress energy transfer from PVK as wide bandgap units to P3HT as low bandgap blocks, yielding dual emissions for white electroluminescence with CIE coordination of (0.34, 0.33).
A novel series of poly(p‐phenylene)s (PPPs) with polyhedral oligomeric silsesquioxanes (POSSs) on their side chains was prepared. The obtained POSS‐modified PPPs are as follows: 25POSS‐PPP ( 2b , containing 25 mol‐% of POSS units in all side chains), 50POSS‐PPP ( 2c , containing 50 mol‐% of POSS units in all side chains), 100POSS‐PPP ( 2d , containing 100 mol‐% of POSS units in all side chains), and 0POSS‐PPP ( 2a , as a blank polymer). Films polymer 2d showed the same absorption and photoluminescence (PL) spectra as those in CHCl3 solution, indicating that bulky POSS units strongly suppressed intermolecular aggregation of the PPP backbone. Polymer 2d showed the same PL spectra even after thermal annealing at 150 °C for 6 h. This enhancement of PL stability is due to the significant effect of the bulky POSS units.
In continuation of our work, we synthesized 2‐(sulfamoylphenyl)‐4′‐amino‐4‐(4″‐hydroxyphenyl)‐thiazole ( 3a ), which were reacted with various (aryl/hetroaryl) aldehyde to form 2‐(sulfamoylphenyl)‐4′‐(iminoaryl/hetroaryl)‐4‐(4″‐hydroxyphenyl)‐thiazoles ( 4a , 4b , 4c , 4d , 4e , 4f ). Glucosylation of compounds ( 4a , 4b , 4c , 4d , 4e , 4f ) have been done by using acetobromoglucose as a glucosyl donor to afford 2‐(sulfamoylphenyl)‐4′‐(iminoaryl/hetroaryl)‐4‐(2,3,4,6‐tetra‐O‐acetyl‐4″‐O‐β‐D ‐glucosidoxyphenyl)‐thiazoles ( 5a , 5b , 5c , 5d , 5e , 5f ), further on deacetylation to produce 2‐(sulfamoylphenyl)‐4′‐(iminoaryl/hetroaryl)‐4‐(4″‐O‐β‐D ‐glucosidoxyphenyl)‐thiazoles ( 6a , 6b , 6c , 6d , 6e , 6f ). The compounds are confirmed by FTIR, 1H‐NMR, 13C‐NMR, and ES‐Mass spectral analysis. J. Heterocyclic Chem., (2011). 相似文献