Selective N-debenzylation of amides with p-TsOH

N-Benzylamides were debenzylated efficiently with 4 equiv. of p-TsOH in refluxing toluene. Good to quantitative yields of the desired primary amides were obtained within 2-4 h from a wide variety of N-2,4-dimethoxybenzylamides. N-4-Methoxylbenzyl amides and N-benzylamides were also debenzylated cleanly. In the case of N-2,4-dimethoxylbenzylamides, selective N-debenzylation was possible in the presence of N-Fmoc, N-t-BOC or N-trityl-protection. Protected amino acid amides survived these conditions without any detectable epimerization.     

Polyfluorinated arylnitrosamines

N-Methyl-, N-n-butyl-, N-t-butylperfluoroarylamines undergo nitrosation with nitrous acid to give the corresponding N-nitroso derivatives. Perfluoroaryl groups were selected from the benzene, indane, biphenyl, naphthalene and pyridine series. According to ¹H and ¹⁹F NMR spectra, N-nitroso-N-methyl derivatives of polyfluoroarenes consist of E and Z isomers with the former prevailing. The more bulky n-butyl group promotes an increase in the formation of Z isomers. Only Z isomers have been obtained from N-t-butyl derivatives of perfluorinated 4-toluidine and 4-aminopyridine. The structure of the Z isomer of N-nitroso-N-methylperfluoro-4-toluidine is confirmed by X-ray data.     

Synthesis of fluorinated imines and carbodiimides from azides via aza-Wittig reaction

The Staudinger reaction of fluoroalkylazides were studied. A series of N-fluoroalkylimines were synthesized via aza-Wittig reaction of N-fluoroalkyliminophosphoranes. The N,N′-difluoroalkylated carbodiimide was also synthesized via the reaction of N-fluoroalkyliminophosphoranes with carbon dioxide or carbon disulfide.     

Acyclic tertiary diamines and 1,4,7,10-tetraazacyclododecane with fluorine-containing β-diketones: Leading to low melting ionic adducts

N,N,N′,N′-Tetramethylmethanediamine (1a), N,N,N′,N′-tetramethylethanediamine (1b), N,N,N′,N′-tetramethyl-1,3-propanediamine (1c), and N,N,N′,N′-tetramethyl-1,6-hexanediamine (1d) were reacted at 25 °C with 1,1,1,5,5,5-hexafluoro-2,4-pentanedione (2a), 2,2-dimethyl-6,6,7,7,8,8,8-heptafluoro-3,5-octanedione (2b), 2-thenoyltrifluoroacetone (2c), and 4,4,4-trifluoro-1-(2-furyl)-1,3-butanedione (2d) to form the ionic adducts 3-18. 1,4,7,10-Tetraazacyclododecane (1e) reacted at 25 °C with β-diketones (2a-d) and 1,1,1-trifluoro-2,4-pentanedione (2e) to give ionic solids 19-23 in good yields. Some of the products are liquid at 25 °C and are thermally stable over long liquid ranges as determined by thermal gravimetric analyses. Single-crystal X-ray structure determinations show that compounds 9 and 21 crystallize in the monoclinic space groups P2(1)/c and P2(1)/n, respectively. All the new compounds were characterized by ¹H, ¹⁹F and ¹³C NMR, electrospray MS and/or elemental analyses.     

Electrochemical fluorination of N,N-dimethylperfluoroacylamides

The electrochemical fluorination (ECF) of N,N-dimethylperfluoroacylamides gives the corresponding perfluoro-N,N-dimethylacylamides in low yield. With increase of the number of carbon atoms in the perfluoroacyl radical the yield of the required perfluoro-N,N-dimethylacylamides is slightly increased.     

Synthesis and network structure of ionic poly(N,N-dimethylacrylamide-co-acrylamide) hydrogels: Comparison of swelling degree with theory

At four different charge densities, ionic hydrogels based on N,N-dimethylacrylamide (DMAAm), acrylamide (AAm), and itaconic acid (IA) were synthesized by free-radical cross-linking copolymerization in water with N,N-methylenebis(acrylamide) (BAAm) as the cross-linker, ammonium persulfate (APS) as the initiator, and N,N,N′,N′-tetramethylenediamine (TEMED) as the activator. The swelling behaviors of these hydrogels were analyzed in buffer solutions at various pH. It was observed that the swelling behavior of cross-linked ionic poly(N,N-dimethylacrylamide-co-acrylamide) [P(DMAAm-co-AAm)] hydrogels at different pHs agreed with the modified Flory-Rehner equation based both on the phantom network and affine network models and the ideal Donnan theory. In addition, the kinetics of swelling of the hydrogels was studied in pH 2, 5 and 9 buffer solutions. The swelling curves exhibited the characteristic features of transport process, apparently the Fickian diffusion of fast rates.     

A convenient and efficient method for the synthesis of mono- and N,N-disubstituted thioureas

A convenient method for the synthesis of mono- and N,N-disubstituted thioureas by the debenzoylation of N-substituted- and N,N-disubstituted-N′-benzoylthioureas with hydrazine hydrate under solvent-free conditions has been developed. N-Substituted-N′-benzoylthioureas and hydrazine hydrate were mixed, and stirred at room temperature without a solvent to give the corresponding N-substituted thioureas in high yields.     

Evaluation of the influence of proline, hydroxyproline or pyrrolidine in the presence of sodium nitrite on N-nitrosamine formation when heating cured meat

N-nitrosamines are meant to be probable or possible carcinogenic components, possibly formed out of a reaction between nitrite and N-containing substances such as amino acids and secondary amines. Nitrite is often used for processing meat products because of its colouring and antimicrobial properties.During this experimental setup, the influence of proline, hydroxyproline or pyrrolidine on N-nitrosamine formation in meat samples was evaluated. The N-nitrosamines concentrations were measured with gas chromatography-thermal energy analyzer. Only the concentrations of N-nitrosodimethylamine and N-nitrosopyrrolidine were found above the limit of detection in a number of tested experimental conditions. The concentration of these two N-nitrosamines was modelled as a function of temperature and nitrite concentration for different situations (presence or absence of added natural N-containing meat components). It could be concluded that proline and pyrrolidine promoted the formation of N-nitrosopyrrolidine. It could also be confirmed that the higher the temperature of the meat processing procedure and the higher the sodium nitrite amounts added, the higher were the yields of the respective N-nitrosamines.     

Synthesis of N,N-dialkylaminobenzonitriles and halo-(N,N-dialkyl)benzamidines by reaction of halobenzonitriles with lithium amides

3- and 4-N,N-Dialkylaminobenzonitriles and 4-chloro-(N,N-dialkyl)benzamidines were isolated by reacting 4-chlorobenzonitrile with hindered lithium amides under thermodynamic (0 °C) and kinetic control conditions (−78 °C), respectively. As previously reported, a benzyne mechanism seems to be confirmed since N,N-dialkylaminobenzonitriles are formed. Only benzamidines were isolated in fair to high yields at both 0 °C and −78 °C with non-hindered lithium amides. Exploitation and mechanistic rationale of the reaction of different halobenzonitriles are also reported.     

New approach to preparation of N-acylphosphoramido(thio)(seleno)ates

N-[2-(X)-1,3,2-Oxathiaphospholane] derivatives (X = S, Se, O) of carboxamides were prepared and their DBU-assisted reaction with alcohols led to the corresponding O-alkyl-N-acylphosphoramido(thio)(seleno)ates. Their structures were confirmed by MS analysis and ¹H and ³¹P NMR spectroscopy. Independently N-acylphosphoramidoselenoates were converted to N-acylphosphoramidates by treatment with tert-butylperoxytrimethylsilane. The oxathiaphospholane approach was also applied to the synthesis of derivatives having N-prolylphosphoramido(thio)(seleno)ate linkages on the 5′-OH group of AMP.     

Dibutylphosphate (DBP) mediated synthesis of cyclic N,N′-disubstituted urea derivatives from amino esters: a comparative study

The N,N′-disubstituted urea derivatives such as amino acid hydantoins and dihydrouracil derivatives were prepared starting from natural and unnatural amino acid esters using dibutylphosphate (DBP). During the attempted synthesis of N-heterocycles with larger than six-membered rings containing the N,N′-disubstituted urea functionalities, three unexpected products namely squamolone, N-methyl pyrrolidine-2-one, and diketopiperazine were isolated.     

Antibacterial activity of N-quaternary chitosan derivatives: Synthesis, characterization and structure activity relationship (SAR) investigations

Quaternary N-(2-(N,N,N-tri-alkyl ammoniumyl and 2-pyridiniumyl) acetyl) derivatives of chitosan polymer, chitooligomer, and glucosamine (monomer) were synthesized for the purpose of investigating the structure activity relationship (SAR) for the antibacterial effect. Novel methods were used in the synthesis. The final chitosan and chitooligomer derivatives could thus be obtained in two steps without prior protection of the hydroxyl groups. However, in order to obtain chitosan derivatives with the bulky N,N-dimethyl-N-dodecyl- and N,N-dimethyl-N-butyl side chains three steps were needed, starting from 3,6-O-di-tert-butyldimethylsilyl chitosan (3,6-O-di-TBDMS chitosan) as the key intermediate. The quaternary ammoniumyl acetyl derivatives of glucosamine were synthesized from glucosamine or tetra-O-acetylglucosamine. N,N,N-trimethyl chitosan (TMC) was used as reference compound for investigation of antibacterial activity. Clinical Laboratory Standard Institute (CLSI) protocols were used to determine MIC and MLC for activity against clinically important Gram-positive strains Staphylococcus aureus (ATCC 25923), and S. aureus (MRSA) (ATCC 43300), and Gram-negative strains of Escherichia coli (ATCC 25922), P. aeriginosa (ATCC 27853) and Enterococcus facialis (ATCC 29212). The MIC values for the compounds ranged from 8 to ?8192 mg/L. In general the N-(2-(N,N-dimethyl-N-dodecyl ammoniumyl) acetyl) derivatives of chitooligomer and glucosamine monomer were more active against bacteria than derivatives with shorter alkyl chains. In contrast the N-(2-(N,N-dimethyl-N-dodecyl ammoniumyl) acetyl) derivatives of chitosan were less active than derivatives with N-(2-N,N,N-trimetylammoniumyl) acetyl or N-(2-(N-pyridiniumyl) acetyl) quaternary moiety. N,N,N-trimethyl chitosan (TMC) was the most active compound in this study.     

Synthesis of N,N-diethyldithiocarbamate functionalized 1,4-polyisoprene, from natural rubber and synthetic 1,4-polyisoprene

N,N-Diethyldithiocarbamate functionnalized 1,4-polyisoprenes were prepared from 1,4-polyisoprenes (natural or synthetic). The syntheses were performed by nucleophilic addition of N,N-diethyldithiocarbamate salts upon oxirane rings of epoxidized units according to a SN2 mechanism with ring opening. Studies on model molecules of epoxidized 1,4-polyisoprene units (1,2-epoxy-1-methylcyclohexane and 4,5-epoxy-4-methyloctane) were previously achieved to develop the procedure. The best yields were obtained at low temperature in polar medium, and more especially in water with sodium N,N-diethyldithiocarbamate (DEDT-Na) as reagent. A diastereospecific addition was noted when reaction was performed in water with DEDT-Na. Afterwards, the developed procedure was successfully generalized to epoxidized synthetic polyisoprenes and epoxidized natural rubber (in THF, then in latex medium). Excellent results were obtained in latex medium with epoxidized natural rubber (ENR) latices. As with the models, a diastereospecific addition of sodium N,N-diethyldithiocarbamate trihydrate onto epoxidized 1,4-polyisoprene units of ENR was observed at the condition to bring the latex medium to pH 8 before introduction of DEDT-Na. Influence of temperature, drc, and DEDT-Na concentration were successively examined to determine the best conditions of the addition on ENR latices.     

N-(Diethoxyphosphoryl)-O-benzylhydroxylamine—a convenient substrate for the synthesis of N-substituted O-benzylhydroxylamines

Easily available N-(diethoxyphosphoryl)-O-benzylhydroxylamine was shown to be convenient, orthogonally protected substrate for regioselective N-alkylation by means of diverse halides under basic conditions (sodium hydride/tetrabutylammonium bromide). An efficient procedure for dephosphorylation of N-substituted N-(diethoxyphosphoryl)-O-benzylhydroxylamine to provide N-substituted O-benzylhydroxylamines was also established.     

Single-step conversion of N-benzyl, N-trityl and N-diphenylmethyl amines to t-butyl carbamates using polymethylhydrosiloxane

t-Butyl carbamates were obtained efficiently in high yields from the corresponding N-benzyl, N-trityl and N-diphenylmethyl precursors in a single-step reductive transformation employing polymethylhydrosiloxane and di-t-butyl dicarbonate under Pd(OH)₂/C catalysis.     

An effective C-C double bond formation via Cu(I)-catalyzed dehydrogenation

A dehydrogenation method using Cu(I) and either N,N-di-tert-butylthiadiaziridine 1,1-dioxide or N,N-di-tert-butyldiaziridinone is reported. The dehydrogenation allows a facile introduction of C-C double bond(s) into various carbocycles and heterocycles such as oxazolines and thiazolines.     

Helicity of N,N′-diaryl-trans-1,2-diaminocyclohexane derivatives. Implications for molecular helicity manipulations

Derivatives of trans-1,2-diaminocyclohexane (DACH), useful as chiral ligands, scaffolds and building blocks, differ in their conformation. The conformation of N,N′-diaryl-DACH derivatives was studied by the semiempirical and DFT computational methods and by exciton-coupled circular dichroism. It was found that, contrary to M-helical N,N′-diimine, N,N′-diimide and N,N′-diamide derivatives, the aromatic residues in N,N′-diphenyl derivatives are oriented to form a P-helix for the (R,R)-DACH absolute configuration. The helicity of the bis-aryl system is modified in the case of 1-naphthyl or 2-naphthyl derivatives. Further switching of helicity has been demonstrated by either protonation or mono-N-acetylation of N,N′-diaryl DACH derivatives.     

Synthesis of new N-aryl oxindoles as intermediates for pharmacologically active compounds

Various new N-aryl oxindoles were synthesized as intermediates for the preparation of pharmacologically active 2-(N-arylamino)-phenylacetic acids. Two novel approaches were explored for the construction of diarylamine and N-aryl oxindole core structures, in addition to Buchwald-arylamination and Smiles rearrangement. Condensation of anilines with 2-oxo-cyclohexylidene-acetic acid derivatives and subsequent dehydrogenation is a new and viable method for the preparation of N-aryl oxindoles.     

Stereoselective radical cyclizations of N-(2-halobenzoyl)-cyclic ketene-N,X(X=O, S)-acetals

2-Alkyloxazolines and 2-alkylthiazolines react with 2-halobenzoyl chlorides to form N-(2-halobenzoyl)-cyclic ketene-N,O-acetals and N-(2-halobenzoyl)-cyclic ketene-N,S-acetals in excellent yields, respectively. These ketene acetals readily undergo stereocontrolled aryl radical cyclizations to afford the central six-membered rings of substituted-2,3,10,10α-tetrahydrooxazolo[3,2-b]isoquinolin-5-ones and their 2,3,10,10α-tetrahydrothiazolo[3,2-b]isoquinolin-5-one analogs. The tertiary N,O- and N,S-radicals formed upon aryl radical reaction at the ketene-N,X(X=O, S)-acetal double bond appear to have reasonable stability. The stereoselectivity in hydrogen abstractions by these intermediate radicals from both Bu₃SnH and (Me₃Si)₃SiH was investigated. The N,S-heterocyclic fused ring products may have potential medical value.     

Base promoted facile route to functionalized benzo[b][1,8]naphthyridin-2-(1H)-ones from N-benzyl-N-(3-cyanoquinolin-2-yl)acetamides

A facile synthesis of 4-amino-N-benzylbenzo[b][1,8]naphthyridin-2(1H)-ones 3 is described from N-benzyl-N-(3-cyanoquinolin-2-yl)acetamides 2 with t-BuOK in excellent yields in mild conditions. These reactions proceeded at room temperature under aerobic atmosphere in very short period. The cyclization reactions were also extended with N-alkyl amino acetamide analogues affording the products in good yields.