A one-pot selective deprotective acetylation of benzyl ethers and OTBDMS ethers using the BF3·Et2O-NaI-Ac2O reagent system

An efficient selective deprotection followed by acetylation of several benzyl ethers, including 6-OBn ethers of monosaccharides, and -OTBDMS ethers has been developed by using the BF₃·Et₂O-NaI-Ac₂O reagent system. In addition, both benzylidene and isopropylidene groups are deprotected to form the corresponding diacetates.     

RuCl3·3H2O as catalyst for Ferrier rearrangement: an efficient procedure for the preparation of pseudoglycosides

By using RuCl₃·3H₂O as catalyst, an improved method for the synthesis of 2,3-unsaturated-glycosides has been established. A series of 2, 3-unsaturated-glucosides were obtained from 2,4,6-tri-O-acetyl-d-glucal or 3,4-di-O-acetyl-6-deoxy-l-glucal in good yield and high anomeric selectivity.     

An investigation into the mechanism of conversion of fac-[Mn(CO)3{P(OMe)2Ph}2X] (X = Cl Br) into mer-cis-[MnCO2{P(OMe)2Ph}3X] in the presence of P(OMe)2Ph

The complex mer-trans-[Mn(CO)₃{P(OMe)₂Ph}₂X] (X = Cl, Br) is an intermediate in the conversion of fac-[Mn(CO)3{P(OMe)₂,Ph}₂,X] into mer- cis-[Mn(CO)₂{P(OMe)₂Ph}₃X] in the presence of P(OMe)₂Ph in benzene. No direct route between the latter two complexes could be detected kinetically. The results imply a trans carbonyl disposition as a prerequisite for higher carbonyl substitution in octahedral Mn¹ carbonyl complexes.     

Synthesis of leukotrienes - new synthesis of natural leukotriene A4

The acetonides of D- or L-glyceraldehyde are chiral synthons for an efficient and versatile synthesis of the natural leukotrienes A₄, C₄, D₄, E₄ and equally can be used to prepare the corresponding unnatural analogues.     

p-tert-Butylcalix[4]arene-based fluororeceptor for the recognition of dicarboxylates

p-tert-Butylcalix[4]arene-based dipodal receptor has been synthesized in cone conformation. The binding affinity of this receptor was evaluated with some aliphatic diacetates such as malonate, succinate, glutarate, adipate, pimelate, and suberate in CH₃CN. The receptor has the highest binding affinity for pimelate by making a 1:1 complex. This receptor was used to estimate pimelate in the presence of other dicarboxylates.     

One-step synthesis of pentavalent triphenylantimony derivatives Ph3Sb(OSiR3)2, Ph3Sb(OCH2CH2)2NH and Ph3Sb(OCH2CH2NMe2)2: X-ray molecular structure of Ph3Sb(OSiMe3)2

Pentavalent bis(triorganosiloxy)triphenylantimony derivatives, Ph₃Sb(OSiR₃)₂ (R = Me, Ph), were synthesized by reaction of triphenylantimony with trimethyl- or triphenylsilanol in the presence of tert-butylhydroperoxide by the mild reaction conditions (0-5 °C, 2 h). The reaction of triphenylantimony with diethanolamine in the presence of tert-butylhydroperoxide gave the cyclic compound Ph₃Sb(OCH₂CH₂)₂NH. The mixture of Ph₃SbO and Ph₃Sb(OCH₂CH₂NMe₂)₂ was obtained by the reaction of triphenylantimony with 2-(N,N-dimethylamino)ethanol in the presence of tert-butylhydroperoxide.     

Copper- and base-free Sonogashira-type cross-coupling reaction of triarylantimony dicarboxylates with terminal alkynes under an aerobic condition

A simple copper- and base-free palladium-catalyzed Sonogashira-type cross-coupling by the use of triarylantimony dicarboxylates is described. Reaction of triarylantimony diacetates with terminal alkynes in the presence of 1 mol % of PdCl₂(PPh₃)₂ catalyst led to the formation of cross-coupling products in good to excellent yields. The reaction proceeded effectively under an aerobic condition, in that two of the three aryl groups on antimony could be transferred to the coupling products, whereas only one of them was involved in the reaction in an argon atmosphere. The reaction is sensitive to the electronic nature of the diacetates, and those bearing an electron-withdrawing group on the aromatic ring showed higher reactivity than those having an electron-donating group.     

Selective removal of anomeric O-acetate groups in carbohydrates using HClO4-SiO2

A convenient methodology has been developed for the selective removal of the anomeric acyl group of carbohydrate derivatives using HClO₄-SiO₂ under acidic reaction conditions. Anomeric benzoyl groups can also be removed selectively following similar reaction conditions. The yields were excellent in all cases.     

Preparation of triarylantimony(V) diacetates and palladium-catalyzed cross-coupling and carbonylative cross-coupling of triarylantimony(V) diacetates and dichlorides with organostannanes

Triarylstibines react with iodobenzene diacetate in dichloromethane to afford triarylantimony(V) diacetates. The cross-coupling and carbonylative cross-coupling of triarylantimony(V) diacetates and dichlorides with organostannanes was accomplished in the presence of PdCl₂ (5 mol%) in CH₃CN at room temperature.     

Chiral 2-C-methylene glycosides and carbohydrate-derived pyrano[2,3-b][1]benzopyrans: synthesis via InCl3 catalyzed stereoselective Ferrier rearrangement of 2-C-acetoxymethyl glycal derivatives

2-C-Acetoxymethyl glycal derivatives react with aliphatic alcohols in the presence of InCl₃ (30 mol %) to furnish the corresponding 2-C-methylene glycosides in excellent yields and with exclusive α-selectivity except for the methyl 2-C-methylene glycosides, which are formed in ∼2:1 anomeric ratio in favour of the α-anomer. The reaction of 2-C-acetoxyglycals with phenols, however, produces the corresponding chiral carbohydrate-derived pyranobenzopyran derivatives via initial Ferrier rearrangement followed by tandem cyclization in excellent yields and moderate to high stereoselectivities in favour of the corresponding 10a-R-pyrano[2,3-b][1]benzopyran derivatives.     

An efficient method for chlorination of alcohols using PPh3/Cl3CCONH2

A new and convenient method for the chlorination of alcohols utilizing PPh₃/Cl₃CCONH₂ is addressed. Various alcohols could smoothly be converted into their corresponding alkyl chlorides in high yield under mild conditions with short reaction times. A mechanism is disclosed with the evidence of inversion of configuration of the analogous alkyl chloride derived from R-(−)-2-octanol.     

Synthesis of γ,γ-difluoro-β-hydroxy-δ-lactones as new precursors of HMG-CoA reductase inhibitor

A series of γ,γ-difluoro-β-hydroxy-δ-lactones 1 were efficiently synthesized as new precursors of HMG-CoA reductase inhibitor in one pot by treatment of readily prepared gem-difluoromethylenated acetonides 3 with trifluoroacetic acid. Contrarily, acetonides 3 could be transformed to the γ,γ-gem-difluoromethylenated α,β-unsaturated δ-lactones 2 through hydrolyzation and lactonization in refluxing toluene.     

Synthesis of silicated hydroxyapatite Ca10(PO4)6−x(SiO4)x(OH)2−x

The preparation of silicated hydroxyapatite Ca₁₀(PO₄)_6−x(SiO₄)_x(OH)_2−x (SiHA) with 0?x?2 was investigated using a wet precipitation method followed by a heat treatment. X-ray diffraction and Rietveld refinement, Fourier transformed IR (FTIR) spectroscopy, elemental analyses, transmission electron microscopy and thermal analyses were used to characterize the samples. The raw materials were composed of a partially silicated and carbonated apatite and a secondary minor phase containing the excess silicon. Single phase silicated hydroxyapatites, with 0?x?1, could be synthesized after a thermal treatment of the raw powders above 700 °C. The presence of carbonate groups in the raw apatite played an important role in the incorporation of silicates during heating. From the different results, the mechanisms of formation of SiHA are discussed.     

Effect of La2O3 on Catalytic Performance of Au/TiO2 for CO Oxidation

Pure TiO₂ and La-doped TiO₂ were prepared by the sol-gel method. Au was supported on TiO₂ by the deposition-precipitation (DP) method, and its catalytic activity for CO oxidation was tested. The results showed that doping La in Au/TiO₂ could improve its catalytic activity obviously for CO oxidation. The analyses of X-ray diffraction (XRD), temperature-programmed desorption (TPD), and Brunauer-Emmett-Teller (BET) surface area further showed that the presence of La in TiO₂ not only increased its surface area and restrained the growth of TiO₂ crystallites, but could also enhance the microstrain of TiO₂. In terms of O₂-TPD, a new adsorbed species O⁻ appeared on the surface of La-doped TiO₂. The results of in-situ Fourier transform-infrared (FT-IR) spectroscopy illustrated that the high activity of Au/La₂O₃-TiO₂ was attributed to the presence of La promoting the reactivity of CO adsorbed on the Au site and the formation of the second active site on the surface of TiO₂     

A comparative study of the Aurivillius phase ferroelectrics CaBi4Ti4O15 and BaBi4Ti4O15

The room temperature structures of the four-layer Aurivillius phase ferroelectrics CaBi₄Ti₄O₁₅ and BaBi₄Ti₄O₁₅ are determined by means of single crystal X-ray diffraction. Regarding the CaBi₄Ti₄O₁₅ phase, in agreement with the tolerance factor, a significant deformation of the perovskite blocks is observed. The rotation system of the octahedra is typical from even layer Aurivillius phases and leads to the use of the space group A2₁am. For the BaBi₄Ti₄O₁₅ phase, only a weak variation with respect to the F2mm space group can be suggested from single crystal X-ray diffraction. A significant presence of Ba atoms in the [M₂O₂] slabs is confirmed in agreement with the previous works but specific Ba²⁺ and Bi³⁺ sites have to be considered due to the large difference in bounding requirement of these cations. Possible origins for the ferroelectric relaxor behavior of the Ba-based compound are discussed in view of the presented structural analyses.     

Conformation of some ribofuranosyl imidazole and uracil nucleosides: a 1H and 13C nmr study

100 and 220 MHz ¹H NMR spectra, recorded in DMSO-d₆ solution and including some measurements at 343 K, of three anomeric pairs of novel 2', 3'-O-isopropylidene nucleosides (two ribofuranosyl imidazoles, 1 and 2, and one uridine 3, all related to intermediates in denovo nucleotide biosynthesis) have been analysed, mostly as overlapping ABX spin systems. Chemical shifts and couplings have enabled the α- and β-anomers to be identified; the sugar-ring vicinal H-H coupling constants indicate that the 2',3'-ketal blocking group locks the α and β anomers in predominantly S and approximately 1:1 N/S ribofuranoside conformations, respectively. Among the ¹³C shifts reported for 3 in DMSO-d₆, those of the 2', 3'-O-isopropylidene CH₃ in the α anomer (shift difference 1.4ppm) are around 1.6 ppm upfield of those for the β anomer (which have a shift difference of 1.8 ppm).     

Synthesis and properties of p-C8-bridged hydroquinones and p-benzoquinones

The cycloaddition of the dispiro compound, $\text{2}$, with a variety of 1,3-butadienes affords diacetates of $\text{p}$-C₈-bridged hydroquinones, which are led to the corresponding hydroquinones and $\text{p}$-benzoquinones.     

Crystal chemistry of the (Ta6Si4O26)6− and (Ta14Si4O47)8− frameworks

The range of chemical flexibilities of the hexagonal frameworks (Ta₆Si₄O₂₆)^6? and (Ta₁₄Si₄O₄₇)^8? have been partially explored. This has been done with high-temperature preparations as in general ionic mobilities in these frameworks are too low to permit low-temperature ion exchange. Ionic site potential calculations indicate that preferential site-occupancy factors as well as geometric constraints are responsible for the absence of ionic motion. New phases K_6?xNa_xTa₆Si₄O₂₆ (x ? 4), K_8?xNa_xTa₁₄Si₄O₄₇ (x ? 5), and impure Ba_3?xNa_2xTa₆Si₄O₂₆ have been prepared. Introduction of up to 2 moles of Li⁺ and 1 mole of Mg²⁺ ions per formula unit into sites of the framework not normally occupied has been demonstrated as well as the possibility of partially substituting Zr⁴⁺ for Ta⁵⁺ ions. Substitutions designed to introduce large tunnel vacancies in the presence of only monovalent K⁺ or Na⁺ ions (P for Si, W for Ta and F for O) generally proved unsuccessful. Competitive phases also frustrated attempts to substitute either the larger Rb⁺ or the smaller Li⁺ ions into the large-tunnel sites. A large area of solid solution was discovered in the BaONa₂OTa₂O₅ phase diagram; it has a (TaO₃)-framework with the structure of tetragonal potassium tungsten bronze.     

A mild and efficient selective tetrahydropyranylation of primary alcohols and deprotection of THP ethers of phenols and alcohols using PdCl2(CH3CN)2 as catalyst

Primary alcohols were selectively tetrahydropyranylated in good to excellent yields at room temperature using PdCl₂(CH₃CN)₂ as catalyst in tetrahydrofuran (THF) in the presence of phenols, secondary, and tertiary alcohols. The tetrahydropyranyl (THP) group could be efficiently removed using PdCl₂(CH₃CN)₂ as catalyst in CH₃CN, while other protection groups such as p-toluenesulfonyl (Ts), tert-butyldiphenylsilyl (TBDPS), benzyloxycarbonyl (Cbz), allyl, benzyl (Bn), and benzoyl (Bz) remained intact under these conditions.     

Magnetic diphase nanostructure of ZnFe2O4/γ-Fe2O3

Magnetic diphase nanostructures of ZnFe₂O₄/γ-Fe₂O₃ were synthesized by a solvothermal method. The formation reactions were optimized by tuning the initial molar ratios of Fe/Zn. All samples were characterized by X-ray diffraction, thermogravimetric analysis, infrared spectroscopy, and Raman spectra. It is found that when the initial molar ratio of Fe/Zn is larger than 2, a diphase magnetic nanostructure of ZnFe₂O₄/γ-Fe₂O₃ was formed, in which the presence of ZnFe₂O₄ enhanced the thermal stability of γ-Fe₂O₃. Further increasing the initial molar ratio of Fe/Zn larger than 6 destabilized the diphase nanostructure and yielded traces of secondary phase α-Fe₂O₃. The grain surfaces of diphase nanostructure exhibited a spin-glass-like structure. At room temperature, all diphase nanostructures are superparamagnetic with saturation magnetization being increased with γ-Fe₂O₃ content.