Hydrogen bonding in 1,1'-Bi-2-naphthol within the polarizable continuum model

Intra- and intermolecular hydrogen bonding of 1,1'-bi-2-naphthol in a series of solvents and in solid phase has been investigated by means of mid-IR spectroscopy and DFT reaction field calculations. The polarizable continuum model has been used to estimate the relative stability of isomers differing in the positions of the hydroxyl groups. The height of the potential barriers between them was also calculated and the corresponding transition states characterized. In hydrogen bond nonaccepting solvents, the isomer preference does not change relative to the gas phase, although the less stable isomers are more probable in solvents of higher relative permittivity. In hydrogen bond forming solvents, the least stable isomer is most probably prevalent due to the additional stabilization through intermolecular hydrogen bonds with solvent molecules. A detailed vibrational analysis revealed the spectral regions specific to the OH vibrations with the observed solvent effects concerning the redistribution of vibrational intensities rather than wavenumber shifts.     

Temperature sensitivity trends and multi-stimuli sensitive behavior in amphiphilic oligomers

A series of oligomers, containing oligo(ethylene glycol) (OEG) moieties, with the same composition of amphiphilic functionalities has been designed, synthesized, and characterized on the basis of their temperature-sensitive behavior. The non-covalent amphiphilic aggregates, formed from these molecules, influence their temperature sensitivity. Covalent tethering of the amphiphilic units also has a significant influence on their temperature sensitivity. The lower critical solution temperatures of these oligomers show increasingly sharp transitions with increasing numbers of OEG functional groups, indicating enhanced cooperativity in dehydration of the OEG moieties when they are covalently tethered. These molecules were also engineered to be concurrently sensitive to enzymatic reaction and pH. This possibility was investigated using porcine liver esterase as the enzyme; we show that enzymatic action on the pentamer lowers its temperature sensitivity. The product moiety from the enzymatic reaction also gives the amphiphilic oligomer a pH-dependent temperature sensitivity.     

Self‐Assembly of π‐Conjugated Gelators into Emissive Chiral Nanotubes: Emission Enhancement and Chiral Detection

A series of new π‐conjugated gelators that contain various aromatic rings (phenyl, naphthyl, 9‐anthryl) and amphiphilic L ‐glutamide was designed, and their gel formation in organic solvents and self‐assembled nanostructures was investigated. The gelators showed good gelation ability in various organic solvents that ranged from polar to nonpolar. Those gelator molecules with small rings such as phenyl and naphthyl self‐assembled into nanotube structures in most organic solvents and showed strong blue emission. However, the 9‐anthryl derivative formed only a nanofiber structure in any organic solvent, probably owing to the larger steric hindrance. All of these gels showed enhanced fluorescence in organogels. Furthermore, during the gel formation, the chirality at the L ‐glutamide moiety was transferred to the nanostructures, thus leading to the formation of chiral nanotubes. One of the nanotubes showed chiral recognition toward the chiral amines.     

Urea derivatives as low-molecular-weight gelators

This paper reports an overview of low-molecular-weight gelators (LMWGs) that have a ureide moiety as a hydrogen-bonding site. Various mono-, bis-, tris-, and tetrakis-urea compounds can form supramolecular gels with organic solvents. The author developed a C ₃-symmetrical tris-urea molecule that can form a ubiquitous framework of LMWGs. The supramolecular organogel of the tris-urea molecule exhibited a chemical-stimuli-responsive reversible gel–sol phase transition. Supramolecular hydrogels are constructed from self-assemblies of amphiphilic urea derivatives. Sugar-connected amphiphilic tris-urea was found to form a gel with water, and the hydrogels showed chemical-stimuli-responsive gel–sol phase transitions. The potential of supramolecular hydrogels as matrices of electrophoresis has been demonstrated through the supramolecular gel electrophoresis (SUGE) of protein samples using our developed amphiphilic tris-urea LMWG.     

Critical influence of the alkane length in surface and liquid-crystalline properties of perfluorodecyl-n-alkanes

Differential scanning calorimetry (DSC) measurements together with texture observation with polarizing microscope revealed the presence of a smectic phase for shorter homologues. Film forming properties of all the perfluorodecyl-n-alkanes synthesized here at the air-water interface were thoroughly investigated. Nearly all the compounds investigated were found to be capable of Langmuir monolayer formation when spread at the water-air interface, apart from semifluorinated alkanes (SFA) containing short hydrogenated moiety (n < 10), which partially dissolve in the water subphase. The investigated homologous series of SFA can be divided into four groups, regarding their liquid-crystalline and surface properties. The first group includes molecules with n = 6-10, which form smectic phases in the bulk and do not form stable monolayers at the free water surface. SFA containing 11 or 12 hydrogenated carbons belong to the second group, forming smectic phases at elevated temperatures, which transform into 3D ordering upon cooling. These molecules are found to form Langmuir monolayers of intermediate stability. The remaining groups contain perfluorodecylalkanes with n > 12, which differ in their calorimetric properties; however, both form very stable films on the water surface and do not exhibit liquid-crystalline properties.     

Synthesis and photophysical properties of self-assembled metallogels of platinum(II) acetylide complexes with elaborate long-chain pyridine-2,6-dicarboxamides

A series of platinum(II) acetylide complexes with elaborate long-chain pyridine-2,6-dicarboxamides was synthesized. These metal complexes are capable of immobilizing organic solvents to form luminescent metallogels through a combination of intermolecular hydrogen bonding, aromatic π-π, and van der Waals interactions. Fibrillar morphologies were identified by TEM for these metallogels. Unique photophysical properties associated with the sol-to-gel transition have been disclosed with luminescence enhancement at elevated temperatures, which is in sharp contrast to typical thermotropic organogels or metallogels reported in the literature. Such unusual luminescence enhancement is attributed to the increased degree of freedom at higher temperatures that results in the formation of favorable molecular aggregates in the excited state through enhanced aromatic π-π and metallophilic Pt(II)···Pt(II) interactions. Structurally similar Pt-bp3 is not able to gel any common organic solvents. The inability of Pt-bp3 to form gels illustrates the importance of gelation to the macroscopic photophysical properties; Pt-bp3 does not show emission enhancement at elevated temperatures due to its low tendency to form strong aggregates in the ground state.     

Two-dimensional facets in Langmuir monolayers of 1-O-hexadecyl-rac-glycerol at the air-water interface

We study the surface phase behavior in Langmuir monolayers of 1-O-hexadecyl-rac-glycerol (C16G) by film balance and Brewster angle microscopy over a wide range of temperatures. A cusp point followed by a pronounced plateau region in the pressure-area (pi-A) isotherm indicates a first-order phase transition between a lower density liquid expanded (LE) phase and a higher density liquid condensed (LC) phase at the air-water interface. A wide variety of condensed domains are found to form just after the appearance of the cusp point. The observed surface morphology was compared with that of ethylene glycol mono-n-hexadecyl ether (C16E1) that bears an ethylene oxide (EO) unit in the head-group. As usually observed, the domains of C16E1 are found to be circular at lower temperatures and fractal at higher temperatures. Contrary to this usual behavior, the domains of C16G are found to be strip-like structures at lower temperatures, which attain increasingly compact shape as the temperature increases and finally attain faceted structures at > or = 25 degrees C. It is concluded that a higher degree of dehydration around the head-group region of C16G appreciably reduces the hydration-induced repulsive interactions between the head-groups and imparts to the molecules an increase in hydrophobicity, thereby a closer molecular packing. As a result, the molecules form increasingly compact domains as the temperature increases. Since the head-group of C16E1 is much smaller than that of C16G, dehydration effect cannot appreciably increase its hydrophobic character. Rather, increases in subphase temperature result in a decrease in the line tension of the interface giving fractal structures at higher temperatures. In addition, the changes in enthalpy (deltaH) and entropy (deltaS) values were also calculated to understand the thermodynamic nature of condensation of the molecules in the LE-LC transition region.     

Water-induced physical gelation of organic solvents by N-(n-alkylcarbamoyl)-L-alanine amphiphiles

A series of amino acid-based gelators N-(n-alkylcarbamoyl)-L-alanine were synthesized, and their gelation abilities in a series of organic solvents were tested. No gelation was observed in pure solvents employed. All the amphiphilic molecules were found to form stable organogels in the solvents in the presence of a small amount of water, methanol, or urea. The volume of solvent gelled by a given amount of the gelator was observed to depend upon the volume of added water. The gelation behavior of the amphiphiles in a given solvent containing a known volume of water was compared. The effects of chirality and substitution on the acid group on the gelation ability were examined. Although the corresponding N-(n-tetradecylcarbamoyl)-DL-alanine was found to form only weak organogel in pure solvents, the achiral amphiphilic compound N-(n-tetradecylcarbamoyl)-β-alanine, however, did not form gel in the absence of water. The methyl ester of N-(n-tetradecylcarbamoyl)-L-alanine was also observed to form gels in the same solvents, but only in the presence of water. The organogels were characterized by several techniques, including (1)H NMR, Fourier transform IR, X-ray diffraction, and field emission scanning electron microscopy. The thermal and rheological properties of the organogels were studied. The mechanical strength of the organogel formed by N-(n-tetradecylcarbamoyl)-DL-alanine was observed to increase upon the addition of water. It was concluded that water-mediated intermolecular hydrogen-bonding interaction between amphiphiles caused formation of supramolecular self-assemblies.     

Effect of molecular structure on the phase behaviour of some liquid crystalline compounds and their binary mixtures. I. 4-Hexadecyloxyphenyl-4-carboxybenzoate and 4-carboxyphenyl-4-hexadecyloxybenzoate

4-Hexadecyloxyphenyl-4-carboxybenzoate ( A ) and 4-carboxyphenyl-4-hexadecyloxy benz- oate ( B ) were prepared and thermally characterized by polarized light microscopy and differential scanning calorimetry. Both compounds possess high transition temperatures indicating the formation of linear dimer molecules in the solid and liquid phases. The infrared data support the conclusion that the alkoxyphenyl carbonyl unit in A is more polarizable and hence stabilizes the intermolecular packing, thus leading to enhanced mesogenicity. Mixtures of the two compounds were prepared and thermally characterized to construct the phase diagram that showed a simple eutectic behaviour in the solid-mesophase transitions, and a linear mesophase-isotropic transition temperatures. The latter behaviour was attributed to similar electronic factors in both molecules.     

Inverting structures: from micelles via emulsions to internally self-assembled water and oil continuous nanocarriers

Fluid-like colloidal structures are key components in nature's own functional materials and important for various applications. For instance, self-assembled structures are formed spontaneously by amphiphilic molecules in solvent, tailored by directional noncovalent intermolecular forces. These structures form the framework of cells defining their geometry and microenvironments for chemical reactions, for maintaining concentration gradients, and for nutrient exchange. Knowledge on the mechanisms at play that underlie the self-assembly of amphiphilic molecules into nanostructures in aqueous and nonaqueous solvents and their dispersion into particles can have direct implications for the rational design of new advanced and nature-inspired materials. These colloidal materials could help to deliver drug molecules and nutrients in a tailored manner to the body, or act as sustainable solvents for chemical or biotechnological processes. This contribution summarizes the recent progress in understanding the self-assembly structure formation in polar and nonpolar solvents and discusses the advances in hierarchically organized systems. Furthermore, it discusses challenges in the characterization of structure and dynamics in these biomimetic materials and highlights selected applications in the fields of drug delivery, food, and biotechnology.     

末端四苯乙烯荧光团标记法研究双亲性嵌段聚合物的自组装行为

以四苯乙烯类分子2-溴-2-甲基-丙酸-3-(4-三苯乙烯基-苯氧基)-丙醇酯(E)作为引发剂,N-异丙基丙烯酰胺和苯乙烯为原料,通过活性自由基聚合,合成了末端具有聚集诱导发光(AIE)活性发光体的双亲性嵌段聚合物G。 详细研究了AIE活性引发剂E和嵌段聚合物G在不同状态下的光物理行为差异。结果表明,在相同浓度条件下,随着温度的升高,引发剂E分散液的荧光强度不断下降。 而嵌段聚合物的荧光强度先上升,当温度超过37 ℃后,嵌段聚合物的荧光强度不断下降。 同样地,通过改变引发剂E和嵌段聚合物G在四氢呋喃和水混合溶剂中的浓度发现,随着浓度的减小,引发剂E的荧光强度不断下降,而嵌段聚合物分散液在改变分散液浓度时荧光强度的变化规律和改变温度时荧光强度的变化趋势相似。 通过监控双亲性嵌段聚合物末端挂接的AIE活性发光分子发光性质的变化可以间接表征其聚集态结构的变化。     

Controllable Self‐Assembly of Amphiphilic Zwitterionic PBI Towards Tunable Surface Wettability of the Nanostructures

Amphiphilic molecules have received wide attention as they possess both hydrophobic and hydrophilic properties, and can form diverse nanostructures in selective solvents. Herein, we report an asymmetric amphiphilic zwitterionic perylene bisimide ( AZP ) with an octyl chain and a zwitterionic group on the opposite imide positions of perylene tetracarboxylic dianhydride. The controllable nanostructures of AZP with tunable hydrophilic/hydrophobic surface have been investigated through solvent‐dependent amphiphilic self‐assembly as confirmed by SEM, TEM, and contact angle measurements. The planar perylene core of AZP contributes to strong π–π stacking, while the amphiphilic balance of asymmetric AZP adjusts the self‐assembly property. Additionally, due to intermolecular π–π stacking and solvent–solute interactions, AZP could self‐assemble into hydrophilic microtubes in a polar solvent (acetone) and hydrophobic nanofibers in an apolar solvent (hexane). This facile method provides a new pathway for controlling the surface properties based on an asymmetric amphiphilic zwitterionic perylene bisimide.     

Supramolecular organogels formed by monochain derivatives of succinic acid

The monoalkyl chain derivatives of succinic acid self-assemble into ordered bilayer aggregates by forming dimers of hydrogen bonded carboxylic acid in a number of organic solvents and finally gelatinize the solvents. The gelation ability of each derivative was inspected. The morphologies of xerogels were investigated by scanning electron microscope (SEM). The microstructure of aggregates was studied by small angle X-ray diffraction (SA-XRD) and Fourier transform infrared spectroscopy (FT-IR). The results reveal that the intermolecular hydrogen bonds between neighboring molecules are critical factor in the process of organogelation.     

Sol-gel phase transition of brucine-appended porphyrin gelator: a study by vibrational circular dichroism spectroscopy

A novel approach to study the sol-gel phase transition of a brucine–porphyrin based gelator, which uses vibrational circular dichroism (VCD) spectroscopy, is described. The gelation process leading to highly ordered chiral supramolecular assemblies was investigated in various solvents at the different temperatures and concentrations. The VCD spectra sensitively reveal the specific parts of molecule whose configuration is influenced by a sol-gel phase transition and chiral supramolecular aggregation and therefore indicate the parts of the molecule responsible for the chiral self-assembly formation. Temperature stability of the organogel studied is discussed on the basis of the VCD and IR absorption spectra. The scanning electron microscopy was used to visualize the structure of brucine–porphyrin conjugate in the gel phase.     

Design of crystal packings of styrylheterocycles and [2+2] photocycloaddition reactions in their single crystals 6. Synthesis and crystal packings of neutral crown-containing and model styrylheterocycles

Neutral crown-containing and model styrylheterocycles of the 4-pyridine, 4-quinoline, and 9-acridine series were synthesized under acidic catalysis. The influence of the molecular geometry of these compounds, as well as of related styrylheterocycles of the 2-benzothiazole and benzobisthiazole series, on the formation of a particular crystal packing was investigated based on X-ray diffraction data. An extension of the conjugation system in the molecules can result in the sandwich-herringbone packing motif as the only one of the three packing motifs most typical of this class of compounds. This packing provides the preorganization of the structural units for the [2+2] photocycloaddition reaction. The styrylheterocycle containing the bulky 9-acridine moiety is nonplanar due to strong intramolecular steric interactions. The packing motifs formed by nonplanar molecules do not provide the preorganization of the molecules for the [2+2] photocycloaddition. The introduction of the crown ether moiety into the benzene ring of the styrylheterocycle can decrease the predictability of the packing motif as a result of the inclusion of solvent molecules capable of hydrogen bonding with the heteroatoms of the macrocycle in the crystal structure.     

Multi-Stimuli-Responsive Properties of Aggregation-Enhanced Emission-Active Unsymmetrical PtII Metallomesogens through Self-Assembly

Herein, we report a series of unsymmetrical bispyrazolate-type Pt^II compounds that exhibit mesomorphism at low temperatures and photophysical multi-stimuli-responsive properties. These Pt^II compounds show a great ability to be self-assembled by intermolecular Pt⋅⋅⋅Pt interactions in the solid state, so generating a columnar stacking of molecules that is responsible for the formation of the mesophases. By controlling the nature of the molecular assembly through external stimuli such as the temperature, the pressure, or the presence of vapours or solvents, it is possible to modulate the luminescence behaviour of these materials. The Pt^II monomers emit a greenish light, whereas aggregation of molecules produces a redshifted emission. These metallomesogens also show a high stability and successive grinding/fuming cycles can be performed without degradation of the sample. The application of these materials is very attractive as rewritable luminescent platforms, and their use is already demonstrated.     

D-xylose Derivative Liquid Crystals

We studied the phase transition temperatures of a series of amphiphilic D-xylopyranose and D-xylofuranose derivatives in which the lipophilic part is an alkyl chain R (n-C_nH_2n+1), regiospecifically linked to D-xylose, at different positions, by Z which is an atom or a functional group (O, S, O–(CH₂)₃–S). The alkyl chain was moved from the C-1 to the C-5 position in the xylose moiety, thereby allowing us to compare directly the phase transition temperatures of the individual materials. These compounds give thermotropic and/or lyotropic liquid crystals. In some cases, we also observed solid–solid phase transitions. This revised version was published online in August 2006 with corrections to the Cover Date.     

Investigation of tetherable distilbazolium compounds as fluorescent probes in nanostructured silica sol-gel materials

Distibazolium dyes are investigated by steady-state and time-resolved fluorescence techniques in a series of low- and high-viscosity polar solvents and in a silica sol-gel matrix. In all solvents and the sol-gel matrix, an interplay of photoinduced switching between different cis-trans isomers and solvation dynamics is observed. Even in a viscous solution (glycerol) and in silica gel, cis-trans isomerization is solvent-controlled. Whereas in glycerol the solvation results in a time-dependent fluorescence Stokes shift, the solvation-induced spectral heterogeneity in silica gel is mostly static, possibly due to a close proximity of dye molecules to the silica surfaces of the nanopores. Compared to low-viscosity solvents, where the cis-trans isomerization process takes place with a solvent-dependent rate on the timescale of about 120-150 ps, it slows down to about 1100-1400 ps in glycerol and about 1500 ps in a sol-gel matrix. Additionally, fluorescence kinetics of the dyes in the sol-gel reveals the presence of a range of different "frozen-in" conformers exhibiting a broad spectrum of lifetimes from 20 to 300 ps.     

In silico studies of 1,3(R):2,4(S)‐dibenzylidene‐D‐sorbitol as a gelator for polypropylene

The organic gelator 1,3(R):2,4(S)‐dibenzylidene‐D‐sorbitol (DBS) self‐organizes to form a 3‐D network at relatively low concentrations in a variety of nonpolar organic solvents and polymer melt. In this work, we have investigated the interactions between DBS molecules in polypropylene (PP) by molecular modeling. We have used quantum mechanics to elucidate the preferred geometry of one molecule and a dimer of DBS, and molecular mechanics and molecular dynamics to simulate pure DBS, pure PP, and mixture of DBS and PP as condensed phases, at various temperatures. It was found that inter‐ and intramolecular H‐bonds between DBS molecules are formed in PP in a much more pronounced manner than those formed in pure DBS. The most significant intermolecular H‐bonds are formed between the terminal hydroxyl groups. The most significant intramolecular H‐bonds are formed between O5 /H‐O6 groups. Due to the H‐bonds, DBS molecules form a rigid structure similar to liquid crystal forming molecules, which might explain their tendency to create nanofibrils. It seems that the aromatic rings do not contribute significantly to the intermolecular interactions. Their main role is probably to stiff the molecular structure. Temperature dependences of inter‐ and intramolecular interactions are different. Whereas intermolecular interactions peak heights decrease when temperature increases for pure DBS, the intramolecular interaction almost does not change. Copyright © 2012 John Wiley & Sons, Ltd.     

Soluble Polyamides and Polyimides Functionalized with Benzo‐15‐Crown‐5‐Pendant Groups

Summary: A new diamine monomer containing a crown ether was made to react with commercial diacid chlorides and dianhydrides to yield new aromatic polyamides and polyimides. The crown ether moiety was introduced as a pendant group so that the polymers showed enhanced solubility in organic solvents, good thermal properties (high transition temperatures and high thermal stability), and good film‐forming ability.

The new aromatic polyamides and polyimides bearing a benzo‐15‐crown‐5‐pendant group synthesized here.