Thermodynamic properties of two zinc borates: 3ZnO·3B2O3·3.5H2O and 6ZnO·5B2O3·3H2O

Two pure zinc borates with microporous structure 3ZnO·3B₂O₃·3.5H₂O and 6ZnO·5B₂O₃·3H₂O have been synthesized and characterized by XRD, FT-IR, TG techniques and chemical analysis. The molar enthalpies of solution of 3ZnO·3B₂O₃·3.5H₂O(s) and 6ZnO·5B₂O₃·3H₂O(s) in 1 mol · dm⁻³ HCl(aq) were measured by microcalorimeter at T = 298.15 K, respectively. The molar enthalpies of solution of ZnO(s) in the mixture solvent of 2.00 cm³ of 1 mol · dm⁻³ HCl(aq) in which 5.30 mg of H₃BO₃ were added were also measured. With the incorporation of the previously determined enthalpy of solution of H₃BO₃(s) in 1 mol · dm⁻³ HCl(aq), together with the use of the standard molar enthalpies of formation for ZnO(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpies of formation of −(6115.3 ± 5.0) kJ · mol⁻¹ for 3ZnO·3B₂O₃·3.5H₂O and −(9606.6 ± 8.5) kJ · mol⁻¹ for 6ZnO·5B₂O₃·3H₂O at T = 298.15 K were obtained on the basis of the appropriate thermochemical cycles.     

Dimethylformamide as a convenient CO source for the facile preparation of rhodium-, iridium- or ruthenium-chlorocarbonyl complexes directly from RhCl3·3H2O,IrCl3·3H2O or RuCl3·3H2O

The anionic complexes [RhCl₂(CO)₂]⁻, [IrCl₂(CO)₂]⁻ or [RuCl₃(CO)₂(DMF)]⁻ can be obtained in high yields (up to 85 %) and in less than 60 min by refluxing dimethylformamide solutions of RhCl₃·3H₂O, IrCl₃·3H₂O or RuCl₃·3H₂O. Depending on the metal, the presence of small amounts of water and/or hydro- chloric acid greatly accelerates the reduction step. For rhodium, several intermediates have been trapped which allow us to propose a mechanism for this reaction.     

Synthesis and Characterization of a New Cyclotriphosphate [C8H 11 NH 3 ] 3 P 3 O 9 ·3H 2 O

Among the various categories of phosphates, the number of organic cation cyclotriphosphates remains limited. In this work, we report the chemical preparation, crystal structure, thermal analysis, and spectroscopic investigations of a new cyclotriphosphate [C₈H₁₁NH₃]₃P₃O₉·3H₂O. It is characterized by X-ray diffraction, infrared spectroscopy, nuclear magnetic resonance, and thermal analysis. This compound is a triclinic P unit cell with the following parameters: a = 13.949(4), b = 9.867(3), c = 14.180(2) Å, α = 92.22(2), β = 119.27(2), γ = 85.10(10)°, V = 1696.1(8) Å ³ , and Z = 2. Its structure has been determined and refined to R = 0.041 and R_w = 0.062, using 4527 independent reflections. The atomic arrangement can be described by corrugated thick layers built by [P₃O₉]^3- anions, ammonium groups, and water molecules. The organic entities are located between these layers. H-bonds connecting the different species play an important role in the tridimensionnal network cohesion. This compound is also characterized by infrared spectroscopy, nuclear magnetic resonance, and thermal analysis.     

Al2O3·3H2O阻燃环氧树脂机理探讨

采用氧指数测定法与热重法研究了Al2O3·3H2O对环氧树脂固化物的阻燃效果与机理.结果表明,Al2O3·3H2O在热分解方面与树脂固化物有阻燃匹配性,并能以零级反应快速失去2个结晶水分子,失水后形成的活性氧化铝促进了树脂固化物热解时转化成难燃物的能力,具有较高的阻燃效果.     

Structure of (C3H5NH3)2H2P2O7·H2O

The bis(cyclopropylammonium)dihydrogenodiphosphate monohydrate is a new diphosphate associated with the organic molecule C₃H₅NH₂. We report the chemical preparation and the crystal structure of this organic cation diphosphate. (C₃H₅NH₃)₂H₂P₂O₇.H₂O is orthorhombic (S.G. : P2₁2₁2₁), with Z = 4 and the following unit-cell parameters : a = 4.828(1) Å, b = 11.011(1) Å, c = 25.645(2) Å. The P₂O₇ groups and H₂O water molecules form a succession of bidimensional layers perpendicular to the c axis. The organic cations ensure the three-dimensional cohesion by NH-O hydrogen bonds.     

Synthesis and thermochemical characteristics of Na2O · Al2O3 · 2.5H2O

A pure phase of monosodium aluminate hydrate Na₂O · Al₂O₃ · 2.5H₂O (MAH) is synthesized and characterized by means of XRD, IR, SEM, TGA, and DSC. The heat capacity of the compound is measured in the temperature range of ?100 to 100°C, and the thermal contributions to enthalpy and entropy are calculated. The standard entropy, enthalpy, and Gibbs energy of formation of MAH at 298 K are estimated.     

Molecular geometries of H2S···ICF3 and H2O···ICF3 characterised by broadband rotational spectroscopy

The rotational spectra of three isotopologues of H(2)S···ICF(3) and four isotopologues of H(2)O···ICF(3) are measured from 7-18 GHz by chirped-pulse Fourier transform microwave spectroscopy. The rotational constant, B(0), centrifugal distortion constants, D(J) and D(JK), and nuclear quadrupole coupling constant of (127)I, χ(aa)(I), are precisely determined for H(2)S···ICF(3) and H(2)O···ICF(3) by fitting observed transitions to the Hamiltonians appropriate to symmetric tops. The measured rotational constants allow determination of the molecular geometries. The C(2) axis of H(2)O/H(2)S intersects the C(3) axis of the CF(3)I sub-unit at the oxygen atom. The lengths of halogen bonds identified between iodine and sulphur, r(S···I), and iodine and oxygen, r(O···I), are determined to be 3.5589(2) ? and 3.0517(18) ? respectively. The angle, φ, between the local C(2) axis of the H(2)S/H(2)O sub-unit and the C(3) axis of CF(3)I is found to be 93.7(2)° in H(2)S···ICF(3) and 34.4(20)° in H(2)O···ICF(3). The observed symmetric top spectra imply nearly free internal rotation of the C(2) axis of the hydrogen sulphide/water unit about the C(3) axis of CF(3)I in each of these complexes. Additional transitions of H(2)(16)O···ICF(3), D(2)(16)O···ICF(3) and H(2)(18)O···ICF(3) can be assigned only using asymmetric top Hamiltonians, suggesting that the effective rigid-rotor fits employed do not completely represent the internal dynamics of H(2)O···ICF(3).     

On the weak O-H···halogen hydrogen bond: a rotational study of CH3CHClF···H2O

We measured the molecular beam Fourier transform microwave spectra of six isotopologues of the 1?:?1 adduct of CH(3)CHClF with water. Water prefers to form an O-H···F rather than an O-H···Cl hydrogen bond. This is just the contrary of what was observed in the chlorofluoromethane-water adduct, where an O-H···Cl link was formed (W. Caminati, S. Melandri, A. Maris and P. Ottaviani, Angew. Chem., Int. Ed., 2006, 45, 2438). The water molecule is linked with an O-H···F bridge to the fluorine atom, with r(F···H(w)) = 2.14 ?, and with two C-H···O contacts to the alkyl hydrogens with r(C(1)-H(1)···O(w)) = 2.75 ? and r(C(2)-H(2)···O(w)) = 2.84 ?, respectively. Besides the rotational constants, the quadrupole coupling constants of the chlorine atom have been determined. In addition, information on the internal dynamics has been obtained.     

VOHPO3·1.5H2O合成及表征

ＶＯＨＰＯ３·１５Ｈ２Ｏ的合成及表征王晓晗黄仲涛（华南理工大学化学工程系，广州５１０６４１）关键词亚磷酸氧钒，表征，结晶，溶剂分类号Ｏ６４３／ＴＱ１１钒磷氧化物（ＶＰＯ）是正丁烷氧化制顺酐的工业催化剂［１］，但其前驱物ＶＯＨＰＯ４·０５Ｈ２Ｏ...     

Crystal structure of a novel complex [Co(3,3′-bpbc)(H2O)3]·H2O

A novel coordination polymer constructed with [Co(3,3′-bpbc)(H₂O)₃]·H₂O(I) (3,3′-bpbc = 2,2′-bipyridine-3,3′-dicarboxylic acid) is successfully synthesized at room temperature and characterized by elemental analysis and IR spectra. The crystal structure of the complex is determined by single crystal X-ray diffraction. The unit cell parameters for complex I are: a = 9.9606(11) Å, b = 9.2552(10) Å, c = 16.0258(17) Å, β = 96.731(0)°, V = 1467.2(3) ų, Z = 4, space group P2(1)/n. In the crystal, the cobalt(II) ion adopts a hexa-coordinate environment, and the structure units aggregate together to give birth to infinite 1D chains. The 2D and 3D framework is constructed via intermolecular hydrogen bonds.     

An analysis of the vibrational frequencies and amplitudes of the H5O+2 ion in H4SiW12O40·6H2O (TSA·6H2O) and H3PW12O40·6H2O (TPA·6H2O)

The infrared, Raman and inelastic neutron scattering (INS) spectra of TSA·6H₂O and TPA·6H₂O are in agreement with those expected for the presence of H₅O⁺₂ ions. Force fields for different assignment schemes are compared with the observed vibrational frequencies and the INS spectral profile. All but two schemes are eliminated. Whilst low-resolution INS spectroscopy cannot distinguish between these two schemes, the orientations of the vibrational ellipsoids for one scheme are in better agreement with those reported from low-temperature crystallographic studies of the H₅O⁺₂ ion.     

The R3O+···H+ hydrogen bond: toward a tetracoordinate oxadionium(2+) ion

Oxatriquinanes are tricyclic oxonium ions which are known to possess remarkable solvolytic stability compared to simple alkyl oxonium salts. Their rigid, hemispherical structure presents an oxygen at the apex of three fused five-membered rings. While trivalent oxygen species like these have been well described in the literature, the ability of oxygen to enter into a fourth covalent bonding relationship has been visited in theory and suggested by the outcome of certain reactions conducted in superacidic media, but has never been established by the characterization of a stable, persistent R(3)OH(2+) or R(4)O(2+) ion. In this study, the nucleophilicity of the oxatriquinane oxygen was evaluated first by a series of protonation studies using the Br?nsted superacid H(CHB(11)Cl(11)) both in the solid state and in liquid HCl solution. The interaction of the oxatriquinane oxygen with a bridging carbocation was also examined. A strong case could be made for the occurrence of hydrogen bonding between H(CHB(11)Cl(11)) and oxatriquinane using IR spectroscopy. Under the most forcing protonation conditions, the oxatriquinane ring is cleaved to give a bridged, dicationic, protonated tetrahydrofuran-carbenium ion.     

Crystal structure and properties of H3[PMo12O40] · 3C2H6O

The title compound H₃[PMo₁₂O₄₀]· 3C₂H₆O was prepared and characterized by X-ray crystallography, its i.r. spectrum, cyclic voltammetry and e.s.r. spectra. The anion of the title compound is a Keggin-type heteropoly structure based upon a central PO₄ tetrahedron surrounded by 12 MoO₆ octahedra arranged in four groups of three edge-shared octahedra Mo₃O₁₃. Weak hydrogen bonds exist between the organic solvent molecules and the heteropoly anion. The catalytic activity of the title compound was determined by the synthesis of butyl acetate. The conversion of n-BuOH reached 93.3% and the yield of MeCO₂Bu-n was 92.0% when the ratio of MeCO₂H to n-BuOH, catalyst amount, reaction time, reaction temperature were 2:1, 0.24% of the reactants (50 mg), 2.0 h and 115 120 °C, respectively.     

Crystal structures of Co3(SeO3)3·H2O and Ni3(SeO3)3·H2O,two new isotypic compounds

Summary The crystal structures of the new, hydrothermally synthesized, isotypic compounds Co₃(SeO₃)₃·H₂O and Ni₃(SeO₃)₃·H₂O were determined by direct and Fourier methods and refined toR _w=0.023, 0.032 using single crystal X-ray data up to sin/=0.81 Å^–1 [space group P ,a=8.102 (2), 7.986 (3) Å;b=8.219 (2), 8.133 (3) Å;c=8.572 (2), 8.422 (3) Å, =69.15 (1), 69.50 (1)°; =62.88 (1), 62.50 (1)°; =67.23 (1), 67.64 (1)°;Z=2]. The structures are built up from [Me ₅(SeO₃)₆·2H₂O]^2– sheets containing three crystallographically different types of octahedrally coordinatedMe ²⁺ and trigonal pyramidal coordinated Se⁴⁺ atoms, respectively. These sheets are linked only by a fourth type ofMe ^2+[6] atom. All coordination polyhedra deviate significantly from their ideal shapes, bond lengths within the extremly distortedMe(4)O₆ polyhedra range from 1.983 (2) Å to 2.403 (2) Å in Co₃(SeO₃)₃·H₂O and from 1.987 (4) Å to 2.301 (3) Å in the Ni compound, O-Se-O bond angles were found between 92.8 (2)° and 104.9 (1)°. Hydrogen bond lengths are 2.802 (3)Å and 2.600 (4)Å in the Co compound, and 2.762 (6) Å and 2.561 (6) Å in Ni₃(SeO₃)₃·H₂O. The latter is one of the shortest known hydrogen bonds donated by a water molecule.

---

Die Kristallstrukturen von Co₃(SeO₃)₃·H₂O und Ni₃(SeO₃)₃·H₂O, zwei neue isotype Verbindungen

Zusammenfassung Die Kristallstrukturen der neuen, hydrothermal synthetisierten, isotypen Verbindungen Co₃(SeO₃)₃·H₂O und Ni₃(SeO₃)₃·H₂O wurden mit direkten und Fourier-Methoden bestimmt und unter Verwendung von Einkristallröntgendaten bis sin/=0.81 Å^–1 aufR _w-Werte von 0.023, 0.032 verfeinert [Raumgruppe P ,a=8.102 (2), 7.986 (3) Å;b=8.219 (2), 8.133 (3) Å;c=8.572 (2), 8.422 (3) Å, =69.15 (1), 69.50 (1)°; =62.88 (1), 62.50 (1)°; =67.23 (1), 67.64 (1)°;Z=2]. Die Strukturen werden von [Me ₅(SeO₃)₆·2H₂O]^2– Schichten aufgebaut, die je drei kristallographisch unterschiedliche Arten von oktaedrisch koordiniertenMe ²⁺ und trigonal pyramidal koordinierten Se⁴⁺ Atomen enthalten. Diese Schichten sind nur durch eine vierte Art vonMe ^2+[6] Atomen verknüpft. Alle Koordinationspolyeder weichen deutlich von ihren Idealformen ab, Bindungslängen in den extrem verzerrtenMe(4)O₆ Polyedern variieren zwischen 1.983 (2) Å und 2.403 (2) Å in Co₃(SeO₃)₃·H₂O und zwischen 1.987 (4) Å und 2.301 (3) Å in der Ni-Verbindung, O-Se-O-Bindungswinkel liegen zwischen 92.8 (2)° und 104.9 (1)°. Wasserstoffbrückenlängen sind 2.802 (3) Å und 2.600 (4) Å in der Co-Verbindung, und 2.762 (6) Å und 2.561 (6) Å in Ni₃(SeO₃)₃·H₂O. Letztere ist eine der kürzesten bekannten Wasserstoffbrücken eines Wassermoleküls.

     

·C2H3+O2→HC·O+H2CO 的密度泛函理论研究

应用密度泛函理论研究了@C2H3+O2→HC@O+H2CO的反应机理.在DFT(B3LYP/6-31G*)水平上对反应过程中所有反应物、中间体、过渡态和产物的几何构型进行优化,通过频率振动分析确认中间体和过渡态.计算IRC反应路径的能量,分析了中间体的异构化过程和各主要原子的自旋密度.     

Raman spectroscopy of newberyite Mg(PO3OH)·3H2O: a cave mineral

Newberyite Mg(PO3OH)·3H2O is a mineral found in caves such as from Moorba Cave, Jurien Bay, Western Australia, the Skipton Lava Tubes (SW of Ballarat, Victoria, Australia) and in the Petrogale Cave (Madura, Eucla, Western Australia). Because these minerals contain oxyanions, hydroxyl units and water, the minerals lend themselves to spectroscopic analysis. Raman spectroscopy can investigate the complex paragenetic relationships existing between a number of 'cave' minerals. The intense sharp band at 982 cm(-1) is assigned to the PO4(3-)ν1 symmetric stretching mode. Low intensity Raman bands at 1152, 1263 and 1277 cm(-1) are assigned to the PO4(3-)ν3 antisymmetric stretching vibrations. Raman bands at 497 and 552 cm(-1) are attributed to the PO4(3-)ν4 bending modes. An intense Raman band for newberyite at 398 cm(-1) with a shoulder band at 413 cm(-1) is assigned to the PO4(3-)ν2 bending modes. The values for the OH stretching vibrations provide hydrogen bond distances of 2.728 ? (3267 cm(-1)), 2.781 ? (3374 cm(-1)), 2.868 ? (3479 cm(-1)), and 2.918 ? (3515 cm(-1)). Such hydrogen bond distances are typical of secondary minerals. Estimates of the hydrogen-bond distances have been made from the position of the OH stretching vibrations and show a wide range in both strong and weak bonds.     

Synthesis and Crystal Structure of a Hydrogen-bonded Supramolecular Compound [(C6H5N2O)3·Cu1.5]·6H2O

A hydrogen-bonded supermolecular compound [(C6H5N2O)3·Cu1.5](6H2O was syn- thesized from picolinamide and Cu(NO3)2·6H2O at the presence of sodium pyrophosphate deca- hydrate. It crystallizes in triclinic, space group P with a = 1.05947(8), b = 1.09130(8), c = 1.11456(8) nm, α = 67.8460(10), β = 84.497(1), γ = 74.6210(10)°, C18H27Cu1.5N6O9, Mr = 566.77, V = 1.15077(15) nm3, Z = 2, Dc = 1.636 g/cm3, F(000) = 585, μ = 1.461 mm-1, R1 = 0.0278 and wR2 = 0.0749. In the complex, the Cu(II) ion reveals a distorted tetradentate plane-tetragonal geometry. The structure consists of neutral two-dimensional layers via hydrogen bonds O-H…O and N-H…O between the molecules, and the layers are connected by weak interactions of the Cu-Cu, Cu-N, π-π and hydrogen bonds to form a three-dimensional network structure.     

Preparation of 2CaO·3B2O3·H2O nanomaterials and evaluation of their flame retardant properties by a thermal analysis method

Different morphologies of calcium borate 2CaO·3B₂O₃·H₂O, nanoribbon, bundle-like nanostructure and fan-shaped non-nanostructure, have been prepared under hydrothermal conditions, which were characterized by XRD, FT-IR, TGA and SEM. Their flame retardant properties to the polypropylene were investigated by thermal analysis method (including TG, DSC and non-isothermal decomposition kinetics) and oxygen index method. With the decrease in TG mass loss, the increase in heat absorption for DSC in N₂ atmosphere, the increase in LOI values, and the increase in apparent activation energy E_a, the flame retardant properties of prepared 2CaO·3B₂O₃·H₂O samples increased gradually from non-nanostructure to bundle-like nanostructure and then to nanoribbon. This trend may be ascribed to their sizes being decreased accordingly. The flame retarding mechanism has been proposed. The mechanical property of polypropylene/2CaO·3B₂O₃·H₂O composite material has also been evaluated. It can be predicted that 2CaO·3B₂O₃·H₂O nanoribbon could serve as an excellent flame retardant.

     

Syntheses and Crystal Structures of (H3O)(C3H5N2)[Mn(OH)6 Mo6O18]·3.5H2O and (H3O)3[Co(OH)6Mo6O18]·7H2O

The crystals of the title compounds (H3O)(C3H5N2)[Mn(OH)6Mo6O18]·3.5H2O 1 and (H3O)3[Co(OH)6Mo6O18]·7H2O 2 have been prepared and structurally determined by X-ray single-crystal diffraction. Compound 1 crystallizes in monoclinic, space group C2/c with a = 21.5018(9), b = 10.9331(5), c = 11.8667(5)A,β = 95.3570(10)o, V = 2777.5(2)A3, Z = 4, Dc = 2.802 g/cm3, Mr = 1171.80,μ(MoKα) = 3.173 mm-1, F(000) = 223, the final R = 0.0458 and wR = 0.1041 for 2093 observed reflections (I>2σ(I)); Compound 2 crystallizes in monoclinic, space group P21/c with a = 11.4042(12), b = 10.9481(11), c = 11.6722(12)A, β= 99.948(2)o, V = 1435.4(3)A3, Z = 2, Dc = 2.794 g/cm3, Mr = 1207.80,μ(MoKα) = 3.223 mm-1, F(000) = 1160, the final R = 0.0544 and wR = 0.1066 for 1906 observed reflections (I > 2σ(I)). Both compounds 1 and 2 adopt the Anderson structure, in which the anion is of centrosymmetry and formed by six octahedral edge-sharing MoO6 units surrounding the central MO6 (M = Mn or Co) octahedron.     

The Crystal Structures of Two Hydro-closo-Borates with Divalent Tin in Comparison: Sn(H2O)3[B10H10] · 3 H2O and Sn(H2O)3[B12H12] · 4 H2O

Journal of Cluster Science - Single crystals of Sn(H2O)3[B10H10]?·?3 H2O and Sn(H2O)3[B12H12]?·?4 H2O are easily accessible by reactions of aqueous solutions of...