Features of the Interaction of Alcian Blue with Gels Based on Copolymer of <Emphasis Type="Italic">N</Emphasis>-Vinylcaprolactam and Methacrylic Acid

The interaction of N-vinylcaprolactam–methacrylic acid copolymer hydrogel and N-vinylcaprolactam homopolymer hydrogel with alcian blue in aqueous solutions is studied. It is shown that copolymer gel are thermo- and pH-sensitive. Dye sorption by the copolymer gel and gel swelling degree depends on the pH of the solution. The features of the system behavior resulting from the pH sensitivity of both the gel and the dye are shown. The thermocollapse of gels incubated in aqueous solutions of alcian blue is studied. It is shown that the transition temperature of N-vinylcaprolactam–sodium methacrylate copolymer gel to the collapsed state decreases with the dye absorption. The temperature-induced collapse of homopolymer gels in dye solutions is reversible, while the copolymer gel mass restores incompletely during the return temperature decrease. The dye absorption by the copolymer gel leads to decreased hysteresis.     

Thermoresponsive behavior of water-salt solutions of a graft copolymer with a main polyimide chain and side poly(<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylamino-2-ethyl methacrylate) side chains

The water-salt solutions of the graft copolymer bearing a polyimide main chain and poly(N,N-dimethylamino-2-ethyl methacrylate) side chains (M = 4.7 × 10⁵, the density of grafting with side chains z = 0.44) are studied by static and dynamic light scattering and turbidimetry. The solutions are investigated in a tenfold range of NaCl concentrations (from 0.015 to 0.15 mol/L) at the polymer concentration from 0.002 to 0.015 g/cm³ and pH from 8 to 12. The temperature dependences of the intensity of scattered light, optical transmission, hydrodynamic radius of scattering objects, and their concentrations in solutions are derived. The temperatures of phase separation onset T ₁ and end T ₂ are determined. It is shown that an increase in the salt content in solution leads to reduction in the polymer solubility and in temperatures T ₁ and T ₂. The watersalt solutions retain all the regularities of phase-separation temperature variation observed for aqueous solutions with change in the concentration of solution and pH of a medium: the values of T ₁ and T ₂ increase upon dilution and growth of acidity.     

Effects of concentration and pH on the thermosensitive behavior of a graft copolymer with polyimide backbone and poly(<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylamino-2-ethyl methacrylate) side chains

Aqueous solutions of the graft copolymer with a polyimide backbone and poly(N,N-dimethylamino-2-ethyl methacrylate) side chains with a molecular mass of M = 4.7 × 10⁵ and a grafting density of side chains of 0.44 are investigated by light scattering and turbidimetry. Solutions are studied in a wide concentration range of 0.0008–0.0250 g/cm³ at рН values varying from 2 to 12 for each concentration. The temperature dependences of optical transmission, scattered light intensity, and hydrodynamic radii of scattering objects are obtained. It is shown that the copolymer is thermosensitive only at pH > 8.0. A decrease in acidity of the medium at a fixed concentration of the copolymer is accompanied by a decline in temperatures corresponding to the onset and end of phase separation Т ₁ and Т ₂, leading to the narrowing of this interval. At constant рН values, temperatures Т ₁ and Т ₂ rise with solution dilution, while the phase transition interval becomes wider.     

Two 1,8-naphthalimide-based proton-receptor fluorescent probes for pH determination

Two newly synthesised 1,8-naphthalimide-based proton-receptor fluorescent probes N-allyl-4-(4’-N,N-diethylpropionamide-acetamido-piperazinyl)-1,8-naphthalimide I and N-(N,N-dibenzylpro- pionamide-acetamido)-4-allyl-1-piperazinyl-1,8-naphthalimide II were synthesised to monitor the change in pH in such a way that the presence of protons can increase the fluorescence intensity of these compounds. Unlike most of the other pH-sensitive probes reported, the probes possess the obvious advantage of being able to detect stronger acids at pH ≈ 2 and a combination of the two probes could detect a wider pH scale from 1.98 to 6.59; this should be very useful for monitoring the pH of the environment.     

Complexation of sodium 2-acrylamido-2-methylpropanesulfonate-monoethanolamine vinyl ether copolymer with polyelectrolytes in aqueous medium

A new water-soluble polyelectrolyte—the copolymer of sodium 2-acrylamido-2-methylpropanesulfonate and monoethanolamine vinyl ether—has been synthesized by free-radical copolymerization. The concentration behavior of the reduced viscosity of copolymer solutions that is typical for polyelectrolytes has been revealed. The reactivity ratios of the monomers have been measured. These values indicate a lower reactivity of monoethanolamine vinyl ether than that of sodium 2-acrylamido-2-methylpropanesulfonate. The complexation of this copolymer with poly(acrylic acid) and poly(N,N-dimethyl-N,N-diallylammonium chloride) has been studied. It has been found that the copolymer demonstrates the polyampholytic behavior and is able to form interpolymer complexes both with polycations and polyanions. It has been established that the polycomplex of the copolymer with polyacrylic acid has the unfolded structure due to the presence of sulfonate groups uninvolved in complexation, while the complex of the copolymer with poly(N,N-dimethyl-N,N-diallylammonium chloride) is compact owing to enhancement of hydrophobic interactions, and the sizes of its species are of the order of 80 nm.     

Stereochemistry of dihydroxylation of <Emphasis Type="Italic">N</Emphasis>-arylbicyclo[2.2.1]-hept-5-ene-<Emphasis Type="Italic">endo</Emphasis>- and -<Emphasis Type="Italic">exo</Emphasis>-2,3-dicarboximides

Stereochemistry of the oxidation of N-arylbicyclo[2.2.1]hept-5-ene-endo-and-exo-2,3-dicarboximides at the double bond with peroxyacetic acid generated in situ in the presence of sulfuric acid and with an anhydrous dioxane solution of peroxyacetic acid was studied. In both cases, the reaction was stereospecific, regardless of the substituent in the N-aryl group and configuration of the imide ring, but the reaction direction depended on the presence of water in the system. In the first case, the corresponding trans-5,6-dihydroxy derivatives were formed, while in the second, exo-5,6-epoxy derivatives. The oxidation of N-arylbicyclo[2.2.1]-hept-5-ene-endo-and-exo-2,3-dicarboximides with a solution of potassium permanganate in aqueous acetone gave the corresponding N-aryl-cis-5,6-dihydroxybicyclo[2.2.1]heptane-endo-and-exo-2,3-dicarboximides. The exo,cis,exo and exo,cis,endo configurations of the synthesized compounds were determined by ¹H NMR spectroscopy.     

Enantioselective hydrogen transfer hydrogenation on rhodium colloid systems with optically active stabilizers

Hydrogen transfer hydrogenation of acetophenone and methyl benzoylformate with 2-propanol was studied on colloidal systems obtained by reduction of rhodium complexes in the presence of optically active compounds: chiral diamines, quaternary salt (4S,5S)-(–)-N¹,N⁴-dibenzylene-2,3-dihydroxy-N¹,N¹,N⁴,N⁴-tetramethylbutane-1,4-diammonium dichloride and (8S,9R)-(–)-cinchonidine. The increase in the molar ratio modifier/Rh leads to the increase in the enantioneric excess (ee) of the reaction products. The largest ee [43.8% of (R)-1-phenylethanol and 58.2% of methyl ester of (R)-mandelic acid] were achieved for the ratios (8S,9R)-(–)-cinchonadine: Rh = 9: 1 and 3: 1, respectively. The catalyst was characterized by the high-resolution transmission electron microscopy, X-ray diffraction analysis, and thermal analysis.     

Reaction of transsilylation of <Emphasis Type="Italic">N</Emphasis>-methyl-<Emphasis Type="Italic">N</Emphasis>-trimethylsilylacetamide with silanes ClCH<Subscript>2</Subscript>SiR<Superscript>1</Superscript>R<Superscript>2</Superscript>Cl

The reaction of N-methyl-N-trimethylsilylacetamide with silanes ClCH₂SiR¹R²Cl (R¹, R² = H, Me; H, Ph; Ph₂) leads to the formation of (O→Si) chelate compounds with pentacoordinate silicon: N-[chloro(methyl)-silyl]methyl-, N-[chloro(phenyl)silyl]methyl-, and N-[chloro(diphenyl)silyl]methyl-N-methylacetamides. From the data of multinuclear NMR spectroscopy, the intermediates of the reaction of N-methyl-N-trimethylsilylacetamide with ClCH₂SiPhHCl and ClCH₂SiPh²Cl are stable in CDCl₃ solution at room temperature during several days and slowly rearrange to the final (O–Si) chelate compounds.     

The doubly thermo-responsive triblock copolymer nanoparticles prepared through seeded RAFT polymerization

The doubly thermo-responsive triblock copolymer nanoparticles of polystyrene-block-poly(N-isopropylacrylamide)-block-poly[N,N-(dimethylamino) ethyl methacrylate] (PS-b-PNIPAM-b-PDMAEMA) are successfully prepared through the seeded RAFT polymerization in situ by using the PS-b-PNIPAM-TTC diblock copolymer nanoparticles as the seed. The seeded RAFT polymerization undergoes a pseudo-first-order kinetics procedure, and the molecular weight increases with the monomer conversion linearly. The hydrodynamic diameter (D _h) of the triblock copolymer nanoparticles increases with the extension of the PDMAEMA block. In addition, the double thermo-response behavior of the PS-b-PNIPAM-b-PDMAEMA nanoparticles is detected by turbidity analysis, temperature-dependent 1H-NMR analysis, and DLS analysis. The seeded RAFT polymerization is believed as a valid method to prepare triblock copolymer nanoparticles containing two thermo-responsive blocks.     

Rhodium(I) bisaldimine complexes in transfer hydrogenation

The reactions of hydrogen transfer from 2-propanol on acetophenone in the presence of the system [Rh(cod)Cl]₂–L] (L is bisaldimine ligands based on (R,R)-1,2-cyclohexanediimine and pyridine-, quinoline-, and thiophenecarboxaldehyde) were studied. Rhodium(I) complexes with optically active ligand showed a high catalytic activity (up to 345 h^–1) and moderate enantioselectivity [up to 55% ee of (R)-1-phenyethanol]. The structure of rhodium complex with N,N'-(1R,2R)-cyclohexane-1,2-diyl-bis[1-(pyridine-2-yl)methanimine] was determined on the basis of the data of ¹H and ¹³C NMR spectroscopy and quantum chemical calculations.     

Optically active polymeric salts prepared from amino acids and polysulfonylpyrrolidinium chloride

Possibility of preparing optically active polymers from N,N-diallyl-N,N-dimethylammonium chloride-sulfur dioxide copolymer and optically active acids was studied by the ion-exchange method.     

Synthesis of cyclic sulfonamides by reaction of <Emphasis Type="Italic">N</Emphasis>-sulfinyl-3-(trifluoromethyl)aniline with norbornenes

N-Sulfinyl-3-(trifluoromethyl)aniline reacted with bicyclo[2.2.1]hept-2-ene and bicyclo[2.2.1]-hepta-2,5-diene to give the corresponding Diels?Alder adducts which were oxidized to 8-trifluoromethyl-2,3,4,4a,6,10b-hexahydro-5λ⁶-1,4-methanodibenzo[c,e][1,2]thiazine-5,5(1H)-diones. The cycloaddition occurred predominantly with participation of the S=N–C¹=C⁶ fragment of N-sulfinyl-3-(trifluoromethyl)aniline and exclusively at the endo side of bicyclo[2.2.1]heptenes.     

Solubility enhancement of phenanthrene using novel chelating surfactant

A novel chelating surfactant denoted as sodium N-lauroyl ethylenediamine triacetate (N-LED3A) with both surface activity and chelation functions was studied for phenanthrene (PHE) solubilisation ability. The critical micelle concentration (CMC) of N-LED3A was measured, and the effects of the initial N-LED3A concentration, temperature, pH value and coexisting ions (Na⁺, Ca²⁺ and Cu²⁺) on PHE solubilisation by N-LED3A were investigated. The results demonstrated that PHE solubility was efficiently enhanced by N-LED3A, especially with N-LED3A concentrations above the CMC, which was 707 mg L^?1 when measured at 25°C. The temperature influenced the apparent PHE solubility slightly and the apparent solubility of PHE was significantly affected by the pH. Na and Ca were shown to increase the PHE solubility, while Ca exhibited a better promoting ability than Na⁺. A suitable quantity of Cu could significantly enhance the solubilisation capacities of N-LED3A at pH 5. The mechanism of the interaction between Cu⁺ and N-LED3A was further confirmed by Fourier transform infrared spectroscopy (FTIR). These results reveal that Cu²⁺ can be chelated with N-LED3A to form a chelate complex. The results implied that N-LED3A had the potential to remediate soils contaminated by both organics and heavy metals.     

Thermodynamics of the dissociation of aminomethanesulfonic acid and its <Emphasis Type="Italic">N</Emphasis>-substituted derivatives in aqueous solutions at 293–313 K

ΔG, ΔH, and ΔS of the second dissociation step of aminomethanesulfonic acid and its N-methyl, N-hydroxyethyl, N-(tert-butyl), N-benzyl derivatives in aqueous solutions (at the isoelectric point where the ionic strength is 4.75 × 10^–4 М) are determined on basis of pH measurements at 293–313 K. It is found that an increase of the electron-acceptor properties of the substituents at nitrogen atom reduces the effect temperature has on the thermodynamic functions of dissociation. Enthalpy–enthropy compensation at an isothermodynamic temperature of 303 K is recorded.     

Synthesis and antimicrobial activity of novel fused [1,2,4]triazino[5,6-<Emphasis Type="Italic">b</Emphasis>]indole derivatives

Synthesis of new fused systems of triazino[5,6-b]indole starting with preparation of 3-amino[1,2,4]-triazino[5,6-b]indole 1 by reaction of isatin with 2-aminoguanidinium carbonate in boiling acetic acid is presented [1]. Intermediate compound 1 reacted with aldehyde, ethyl chloroformate, triethyl orthoformate, and ninhydrine and gave new heterotetracyclic nitrogen systems, such as 3-(N ²-guanidinylimino)indole-2(1H)-one 2, 3-(N-ethoxycarbonylamino)-4H-[1,2,4]triazino[5,6-b]indole 3, 3-(N-ethoxymethyleneamino)-4H-[1,2,4]-triazino[5,6-b]indole 4, 3-(hydrazinothiocarbonylamino)-4H-[1,2,4]triazino[5,6-b]indole 5, respectively. N-(1,3-dioxoindene-2-ylidene)-4H-[1,2,4]triazino[5,6-b]indol-3-amine 6 was synthesized by reaction of compound 1 with aldehyde, ethyl chloroformate, triethyl orthoformate, and ninhydrine. New fused indole systems, pyrimido[2′,1′:3,4][1,2,4]triazino[5,6-b]indol-3(4H)-one 8, 9, 11, 12 and 1H-imidazo[2′,1′:3,4][1,2,4]triazino-[5,6-b]indol-2(3H)-one 10, were synthesized in the reaction of the intermediate 1 with bifunctional compounds. Structures of the products were elucidated from their elemental analysis and spectral data (IR, ¹H and ¹³C NMR and mass spectra). Antimicrobial activity of some synthesized compounds was tested.     

Cyclization of trifluoro-<Emphasis Type="Italic">N</Emphasis>-(prop-2-yn-1-yl)methanesulfonamides to <Emphasis Type="Italic">N</Emphasis>-(hydroxymethyl)-1,2,3-triazoles

Three-component heterocyclizations of trifluoro-N-(prop-2-yn-1-yl)methanesulfonamide, trifluoro-N-pheny-N-(prop-2-yn-1-yl)methanesulfonamide, and trifluoro-N,N-di(prop-2-yn-1-yl)methanesulfonamide with formaldehyde and sodium azide afforded N-{[2-(hydroxymethyl)-2H-1,2,3-triazol-4-yl]methyl}-, N-{[2-(hydroxymethyl)-2H-1,2,3-triazol-4-yl]methyl}-N-phenyl-, and N,N-bis{[2-(hydroxymethyl)-2H-1,2,3-triazol-4-yl]methyl}trifluoromethanesulfonamides as the major products together with minor 1-(hydroxymethyl)-1H-1,2,3-triazole isomers.     

Copolymer of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diallyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylammonium chloride with maleic acid as drug carrier

A copolymer of N,N-diallyl-N,N-dimethylammonium chloride with maleic acid of constant composition was prepared under the conditions of radical initiation. The possibility of the functionalization of the copolymer with drugs containing amino groups by polymer-analogous transformations was examined. Conditions were found for preparing conjugates of the copolymer with isoniazid. The structures and the quantitative compositions of the conjugates were determined by ¹³С NMR spectroscopy, and the possibility of preparing conjugates with controlled drug content was demonstrated.     

Ultrafiltration membranes based on interpolyelectrolyte complexes: Adsorption and mass-exchange properties

Ultrafiltration membranes based on interpolyelectrolyte complexes of a sulfonated aromatic copolyamide, an acrylonitrile–N,N-dimethyl-N,N-diallylammonium chloride copolymer, and poly-N,N-dimethyl-N,N-diallylammonium chloride were prepared. The adsorption (in batch experiments and under conditions of ultrafiltration of myoglobin, lysozyme, and bovine serum albumin solutions) and mass-exchange properties of the membranes were studied. Correlation between the procedure for performing the interpolymer reaction, the composition of the complexes formed, and the characteristics of the membranes prepared was found. The protein/membrane interaction in the system studied is mainly due to Coulomb forces. The effect of the protein adsorption on the separation and transport properties of the membranes was considered. The general level of the mass-exchange properties of the membranes based on the interpolyelectrolyte complexes is higher compared to the samples containing ionic groups of like charge.     

Atropisomeric <Emphasis Type="Italic">N</Emphasis>-acyl-<Emphasis Type="Italic">N</Emphasis>-(cyclopentenylphenyl)glycines in the synthesis of oxazolo[3,4-<Emphasis Type="Italic">a</Emphasis>]benzoxazocinones

Intramolecular [3+2]-cycloaddition was studied of munchnones generated at heating syn- and anti-atropisomers of N-acyl-N-[6-methyl-2-(cyclopent-2-en-1-yl)phenyl]glycines with acetic anhydride. By spectral and X-ray diffraction analysis syn-isomers of acids and tetrahydro-1,4,7-methanetriyl[1,3]oxazolo[3,4-a][1]- bensazocin-3(3aH)-ones were identified.     

Epoxidation and Heterocyclization of Arenesulfonamides of the Norbornene Series

Reactions of previously known and newly synthesized N-(bicyclo[2.2.1]hept-5-en-endo-2-ylmethyl)arenesulfonamides with monoperoxyphthalic acid generated in situ from phthalic anhydride and 30% hydrogen peroxide lead mostly to the corresponding N-arylsulfonyl-exo-2-hydroxy-4-azatricyclo[4.2.1.0^3,7]nonanes (azabrendanes). In some cases, N-(exo-5,6-epoxybicyclo[2.2.1]hept-5-en-exo-2-ylmethyl)arenesulfonamides were isolated as the only products or mixtures of alternative oxidation products were obtained. The presence of electron-acceptor nitro groups in the benzene ring and bulky substituents, primarily in the ortho position, is considered to be a structural factor preventing the primary oxidation products (epoxy derivatives) from undergoing heterocyclization.