Ordering of amphiphilic Janus particles at planar walls: a density functional study

We investigate the structure formation of amphiphilic molecules at planar walls using density functional theory. The molecules are modeled as (hard) spheres composed of a hydrophilic and hydrophobic part. The orientation of the resulting Janus particles is described as a vector representing an internal degree of freedom. Our density functional approach involves fundamental measure theory combined with a mean-field approximation for the anisotropic interaction. Considering neutral, hydrophilic, and hydrophobic walls, we study the adsorption of the particles, focusing on the competition between the surface field and the interaction-induced ordering phenomena. Finally, we consider systems confined between two planar walls. It is shown that the anisotropic Janus interaction yields pronounced frustration effects at low temperatures.     

Rinse and evaporation coating of poly(methyl methacrylate) microchip for separation of sodium dodecyl sulfate-protein complex

We developed a novel channel wall coating on a poly(methyl methacrylate) (PMMA) microchip using methylcellulose (MC) as a coating reagent to suppress electroosmotic flow (EOF) following the strong analytes adsorption via hydrophobic interaction with channel walls of PMMA. Our coating was obtained by first rinsing channel walls with MC-containing aqueous solution followed by evaporation. The coating made the hydrophilic channel wall lowering EOF by two orders of magnitude (1.2 x 10(-5)cm(2)V(-1)s(-1)) as well as reducing the hydrophobic adsorption. On the coated channel walls, we successfully separated sodium dodecyl sulfate-protein complexes with high reproducibility and efficiency using dextran as a lower viscosity protein separation medium.     

Channel wall coating on a poly-(methyl methacrylate) CE microchip by thermal immobilization of a cellulose derivative for size-based protein separation

We demonstrate channel wall coating using a cellulose derivative on a poly-(methyl methacrylate) (PMMA) CE microchip to eliminate EOF disturbing protein separation. The channel walls were modified by preconditioning with a solution containing the cellulose derivative and then thermally evaporating the solution to produce hydrophilic channel walls which prevent adsorption of analytes via a hydrophobic interaction. When the PMMA substrate was coated with the cellulose derivative hydroxypropylmethylcellulose (HPMC) 90SH, the water contact angle on the coated substrate was decreased (up to 15 degrees ) and EOF was significantly suppressed (up to 4.0 x 10(-6) cm2.V(-1)s(-1)). Three proteins (20.5, 68.0, and 114.6 kDa) were successfully separated on the 0.15% HPMC 90SH-coated channel walls with good reproducibility of migration time (RSD <1.75%) and high efficiency (theoretical plate number per meter: 2.62 x 10(5)).     

Large-scale molecular-dynamics simulation of nanoscale hydrophobic interaction and nanobubble formation

We performed large-scale molecular-dynamics simulation of nanoscale hydrophobic interaction manifested by the formation of nanobubble between nanometer-sized hydrophobic clusters at constrained equilibrium. Particular attention is placed on the tendency of formation and stability of nanobubbles in between model nanoassemblies which are composed of hydrophobic clusters (or patches) embedded in a hydrophilic substrate. On the basis of physical behavior of nanobubble formation, we observed a change from short-range molecular hydrophobic interaction to midrange nanoscopic interaction when the length scale of hydrophobe approaches to about 1 nm. We investigated the behavior of nanobubble formation with several different patterns of nonpolar-site distribution on the nanoassemblies but always keeping a constant ratio of nonpolar to polar monomer sites. Dynamical properties of confined water molecules in between nanoassemblies are also calculated.     

Confinement induced critical micelle concentration shift

In this work, extensive lattice Monte Carlo simulations were performed to investigate the influence of confinement on critical micelle concentration (CMC). It is found that the CMC of surfactants in a confined space is shifted from its bulk value, and the shift is affected by the presence of the confining boundaries, which induces both the finite size effect and the wall-surfactant interaction. In general, for strongly confined system (the system with narrow pore size), the finite size effect dominates the CMC shift because the confined space cannot accommodate fully developed micelles, and the rapid increase of the entropic loss due to the decrease of the pore size results in the rapid increase of CMC. In contrast, for a weakly confined space, the CMC shift depends on the interaction between the walls and surfactants. For the systems with two weakly hydrophilic surfaces, the local density depletion of the surfactants near the walls results in lower CMCs than the bulk value, and the CMC shifts to a higher value as the pore size increases. For the systems with moderately hydrophilic surfaces, the shifts of CMCs show a similar behavior as those for weakly hydrophilic surfaces, but the CMCs are near their bulk values in the range of weak confinement. For the systems with strongly attractive wall-surfactant interactions, the strong adsorption also results in lower CMCs than their bulk value, but the CMCs decrease with the increase of pore size.     

Effect of surface polarity on water contact angle and interfacial hydration structure

We perform molecular dynamics simulations of water in the presence of hydrophobic/hydrophilic walls at T = 300 K and P = 0 GPa. For the hydrophilic walls, we use a hydroxylated silica model introduced in previous simulations [Lee, S. H.; Rossky, P. J. J. Chem. Phys. 1994, 100, 3334. Giovambattista, N.; Rossky, P. J.; Debenedetti, P. G.; Phys. Rev. E 2006, 73, 041604.]. By rescaling the physical partial atomic charges by a parameter 0 相似文献   

Separation of proteins by hydrophobic interaction chromatography at low salt concentration

We investigated protein separation by hydrophobic interaction chromatography (HIC) at low salt concentration on the supports of various hydrophobicities. Hydrophobic proteins could be successfully separated with more than 90% recovery by gradient elution of ammonium sulfate from 0.3-0.5 M to 0 in 50 mM phosphate buffer (pH 6.8) by using supports whose hydrophobicities were properly adjusted individually for each protein. Satisfactory results were also obtained by isocratic elution without ammonium sulfate and gradient elution of ethanol from 0 to 10%. HIC at low salt concentration was compatible with other modes of liquid chromatography like ion-exchange chromatography. On the other hand, it was not successful to separate hydrophilic proteins at low salt concentration. Recoveries of hydrophilic proteins decreased before they were retained enough as support hydrophobicity increased. Therefore, it is inevitable to use a higher concentration of salt, e.g., 1-2 M ammonium sulfate, on hydrophilic or moderately hydrophobic support in order to retain hydrophilic proteins without decrease in recovery.     

Molecular dynamics simulation study of interaction between model rough hydrophobic surfaces

We study some aspects of hydrophobic interaction between molecular rough and flexible model surfaces. The model we use in this work is based on a model we used previously (Eun, C.; Berkowitz, M. L. J. Phys. Chem. B 2009, 113, 13222-13228), when we studied the interaction between model patches of lipid membranes. Our original model consisted of two graphene plates with attached polar headgroups; the plates were immersed in a water bath. The interaction between such plates can be considered as an example of a hydrophilic interaction. In the present work, we modify our previous model by removing the charge from the zwitterionic headgroups. As a result of this procedure, the plate character changes: it becomes hydrophobic. By separating the total interaction (or potential of mean force, PMF) between plates into the direct and the water-mediated interactions, we observe that the latter changes from repulsive to attractive, clearly emphasizing the important role of water as a medium. We also investigate the effect of roughness and flexibility of the headgroups on the interaction between plates and observe that roughness enhances the character of the hydrophobic interaction. The presence of a dewetting transition in a confined space between charge-removed plates confirms that the interaction between plates is strongly hydrophobic. In addition, we notice that there is a shallow local minimum in the PMF in the case of the charge-removed plates. We find that this minimum is associated with the configurational changes that flexible headgroups undergo as the two plates are brought together.     

A simple approach for local contact angle determination on a heterogeneous surface

We report a simple approach for measuring the local contact angle of liquids on a heterogeneous surface consisting of intersected hydrophobic and hydrophilic patch arrays, specifically by employing confocal microscopy and the addition of a very low concentration of Rhodamine-B (RB) (2 × 10(-7) mol/L). Interestingly, RB at that concentration was found to be aggregated at the air-liquid and solid (hydrophobic patch only)-liquid interfaces, which helps us to distinguish the liquid and solid interfaces as well as hydrophobic and hydrophilic patches by their corresponding fluorescent intensities. From the measured local contact angles, the line tension can be easily derived and the value is found to be (-2.06-1.53) × 10(-6) J/m.     

Structure of an associating polymer melt in a narrow slit by molecular dynamics simulation

Molecular dynamics simulation has been used to study the equilibrium properties of a generic coarse-grained polymer melt with associating terminal groups, confined in a narrow slit by two atomically smooth walls. Simulations were carried out as a function of wall separation and attracting strength as well as polymer end-end interaction strength. We find that confinement has an important effect on the melt properties. In particular, strongly attracting walls can produce radical changes in chain conformation, the nature of the transient network, and the structure of the aggregates formed by the associating terminals.     

Origin of the Hydrophobic Behaviour of Hydrophilic CeO2

The nature of the hydrophobicity found in rare-earth oxides is intriguing. The CeO₂ (100) surface, despite its strongly hydrophilic nature, exhibits hydrophobic behaviour when immersed in water. In order to understand this puzzling and counter-intuitive effect we performed a detailed analysis of the confined water structure and dynamics. We report here an ab-initio molecular dynamics simulation (AIMD) study which demonstrates that the first adsorbed water layer, in immediate contact with the hydroxylated CeO₂ surface, generates a hydrophobic interface with respect to the rest of the liquid water. The hydrophobicity is manifested in several ways: a considerable diffusion enhancement of the confined liquid water as compared with bulk water at the same thermodynamic condition, a weak adhesion energy and few H-bonds above the hydrophobic water layer, which may also sustain a water droplet. These findings introduce a new concept in water/rare-earth oxide interfaces: hydrophobicity mediated by specific water patterns on a hydrophilic surface.     

The effect of corrugation of pore wall on the thermal diffusion in nanopores by molecular dynamics simulations

In this work we have studied the effect of corrugation on the thermal diffusion (soret effect) in isotopic and non-isotopic fluid mixtures confined in a slit pore. We used a boundary driven non-equilibrium molecular dynamics to simulate thermal diffusion in Lennard–Jones (LJ) binary mixtures confined in structureless Steele 10-4-3 and atomistic Lennard–Jones pore walls. The results showed that for the isotopic mixture thermal diffusion factor for both wall types agrees and the corrugation of the LJ wall has no effect in isotopic mixture. However, for non-isotopic mixture confined in atomistic LJ pore the component with stronger attraction adsorbs more to the wall than the structureless Steele wall. The effect of corrugation of pore wall on the thermal diffusion is noticeable in narrow slit pore and mixture with large difference in molecular attraction parameter of components.     

SiO2纳米粒子对受限流场下聚异丁烯/聚二甲基硅氧烷共混物相形态的影响

利用显微-光学剪切联用系统构造受限剪切环境,探讨了少量不同表面性质的SiO2纳米粒子的加入对聚异丁烯(PIB)/聚二甲基硅氧烷(PDMS)不相容共混体系分散相形态演变过程的影响.研究结果表明,少量疏水性SiO2纳米粒子的加入可抑制分散相液滴的凝聚,从而抑制珍珠链状及纤维状等超级相形态的形成,使共混物表现为近似本体流体的...     

Surface activity of new invertible amphiphilic polyesters based on poly(ethylene glycol) and aliphatic dicarboxylic acids

The surface active properties of aqueous solutions of invertible amphiphilic alternated polyesters differing by hydrophilic-lipophilic balance (HLB) and molecular weight have been determined over the wide concentration range. The polyesters are based on poly(ethylene glycol) (PEG) of two molecular weights and aliphatic dicarboxylic acids (decanedioic and dodecanedioic). The surface activity of the polyesters and their ability to form micellar assemblies (which was recently shown for organic solvents) has been confirmed in water. The central role of the balance of hydrophilic to hydrophobic groups ratio in the formation of polymeric arrangements having hydrophobic pockets and external hydrophilic shell has been shown. The effect of molecular weight has been found considerable as well. Two changes in slope have been observed for the more hydrophobic polyesters in the surface tension vs log concentration curve. The change at low concentration is believed to originate from the formation of polyester assemblies with a hydrophobic interior and hydrophilic exterior due to the interaction of hydrophobic fragments and macromolecular flexibility. The higher concentration region exhibits behavior consistent with a cmc, which was confirmed by additional dye solubilization experiments. Molecular structure of the polyester micelles is determined by the solubilization of a solvatochromic dye. The experiment confirmed that micellization of polyesters is accompanied by the association of more hydrophobic (aliphatic) constituents forming the micelle interior. The hydrophilic fragments (ethylene oxide groups) are involved in the formation of micelle exterior.     

Molecular dynamics study of hydrated imogolite. 2. Structure and dynamics of confined water

The behaviour of water confined in an imogolite nanotube was studied by means of molecular dynamics simulations. The results of the study show an important difference between the interaction of water molecules with the internal and external surfaces of the nanotube. The analysis of the density profiles of confined molecules, of their spatial organisation, of the size of molecular clusters, of the lifetime of H-bonds in the system and of dynamical characteristics of molecules permits us to qualify the external imogolite surface as hydrophobic, whereas the internal surface reveals a hydrophilic character.     

Transport of a liquid water and methanol mixture through carbon nanotubes under a chemical potential gradient

In this work, we report a dual-control-volume grand canonical molecular dynamics simulation study of the transport of a water and methanol mixture under a fixed concentration gradient through nanotubes of various diameters and surface chemistries. Methanol and water are selected as fluid molecules since water represents a strongly polar molecule while methanol is intermediate between nonpolar and strongly polar molecules. Carboxyl acid (-COOH) groups are anchored onto the inner wall of a carbon nanotube to alter the hydrophobic surface into a hydrophilic one. Results show that the transport of the mixture through hydrophilic tubes is faster than through hydrophobic nanotubes although the diffusion of the mixture is slower inside hydrophilic than hydrophobic pores due to a hydrogen network. Thus, the transport of the liquid mixture through the nanotubes is controlled by the pore entrance effect for which hydrogen bonding plays an important role.     

Structural studies of water in hydrophilic and hydrophobic mesoporous silicas: an x-ray and neutron diffraction study at 297 K

Water confined in a sol-gel network has been characterized by x-ray and neutron diffraction for two samples of mesoporous silica: one with a hydrophilic character (a nonmodified one) and another with a hydrophobic character (a modified one with a methylated internal pore surface). The pore size has been previously characterized [J. Jelassi et al., Phys. Chem. Chem. Phys. 134, 1039 (2010)] to have a mean pore diameter of approximately 55 A?. The diffraction measurements presented in this paper have been made at room temperature [293 K] for a filling factor of 0.45, giving a mean thickness of 8-9 A? for the water layer. The results show that the local order of the confined water molecules in the intermediate region of 3-6 A? is significantly different from that of the bulk water and also for the two different environments. For the hydrophilic sample, the siloxyl groups at the surface modify the water structure through the effects of interfacial hydrogen-bonding, which influences the orientational configuration of local water molecules and creates a modified spatial arrangement in the pore. In the case of the hydrophobic sample, there is no specific interaction with the pore wall, which is primarily van der Waals type, and the water molecules at the interface are differently oriented to create a hydrogen-bonded network linked more directly to the rest of the water volume. In the present circumstances, the thickness of the water layer has a relatively small dimension so that the interpretation of the measured diffraction pattern is not as straightforward as for the bulk liquids, and it is necessary to consider the effects of diffraction-broadening from a distributed sample volume and also the contribution from cross-terms that remain after conducting a "wet-minus-dry" analysis procedure. These analytic difficulties are discussed in the context of the present measurements and compared with the work of other groups engaged in the study of water confined in different environments. The present results, again, emphasize the complexity influencing the properties of water in a confined geometry and the strong influence of surface interactions on its behavior.     

Surface-directed capillary system; theory, experiments and applications

We present a capillary flow system for liquid transport in microsystems. Our simple microfluidic system consists of two planar parallel surfaces, separated by spacers. One of the surfaces is entirely hydrophobic, the other mainly hydrophobic, but with hydrophilic pathways defined on it by photolithographic means. By controlling the wetting properties of the surfaces in this manner, the liquid can be confined to certain areas defined by the hydrophilic pathways. This technique eliminates the need for alignment of the two surfaces. Patterned plasma-polymerized hexafluoropropene constitutes the hydrophobic areas, whereas the untreated glass surface constitutes the hydrophilic pathways. We developed a theoretical model of the capillary flow and obtained analytical solutions which are in good agreement with the experimental results. The capillarity-driven microflow system was also used to pattern and immobilize biological material on planar substrates: well-defined 200 microm wide strips of human cells (HeLa) and fluorescence labelled proteins (fluorescein isothiocyanate-labelled bovine serum albumin, i.e., FITC-BSA) were fabricated using the capillary flow system presented here.     

Monomeric fullerenes in lipid membranes: effects of molecular shape and polarity

We report a combined theoretical and experimental study on the single-molecule interaction of fullerenes with phospholipid membranes. We studied pristine C(60) (1) and two N-substituted fulleropyrrolidines (2 and 3), one of which (3) bore a paramagnetic nitroxide group. Theoretical predictions of fullerene distribution and permeability across lipid bilayers were combined with electron paramagnetic resonance (EPR) experiments in aligned DMPC/DHPC bicelles containing the paramagnetic fulleropyrrolidine 3 or either one of the diamagnetic fullerenes together with spin-labeled lipids. We found that, at low concentrations, fullerenes are present in the bilayer as single molecules. Their preferred location in the membrane is only slightly influenced by the derivatization: all derivatives were confined just below the hydrophilic/hydrophobic interface, because of the key role played by dispersion interactions between the highly polarizable fullerene cage and the hydrocarbon chains, which are especially tight within this region. However, the deviation from spherical shape is sufficient to induce a preferential orientation of 2 and 3 in the membrane. We predict that monomeric fullerenes spontaneously penetrate the bilayer, in agreement with the results of molecular dynamics simulations, but we point out the limits of the currently used permeability model when applied to hydrophobic solutes.     

纳米通道内混合气体流动的分子动力学模拟

采用非平衡分子动力学方法, 模拟了混合气体在纳米通道中的Poiseuille流动. 结果显示气体混合物的化学成分与物理结构不再均匀一致, 随着亲水性气体粒子的减少, 亲水性粒子逐渐被吸附于壁面, 而疏水性粒子主要分布于通道中间. 当亲水性粒子为10%时, 混合气体在壁面处形成有序的“类固体”. 在本文的模拟条件下, 流体速度分布显示混合气体流动速度随着疏水性粒子比例的增加而升高; 同时, 混合气体滑移速度也从负滑移速度逐渐转变为正滑移速度.