Synthesis and characterization of aromatic poly(ether sulfone imide)s derived from sulfonyl bis(ether anhydride)s and aromatic diamines

Two sulfonyl group-containing bis(ether anhydride)s, 4,4′-[sulfonylbis(1,4-phenylene)dioxy]diphthalic anhydride ( IV ) and 4,4′-[sulfonylbis(2,6-dimethyl-1,4-phenylene)dioxy]diphthalic anhydride (Me- IV ), were prepared in three steps starting from the nucleophilic nitrodisplacement reaction of the bisphenolate ions of 4,4′-sulfonyldiphenol and 4,4′-sulfonylbis(2,6-dimethylphenol) with 4-nitrophthalonitrile in N,N-dimethylformamide (DMF). High-molar-mass aromatic poly(ether sulfone imide)s were synthesized via a conventional two-stage procedure from the bis(ether anhydride)s and various aromatic diamines. The inherent viscosities of the intermediate poly(ether sulfone amic acid)s were in the ranges of 0.30–0.47 dL/g for those from IV and 0.64–1.34 dL/g for those from Me- IV. After thermal imidization, the resulting two series of poly(ether sulfone imide)s had inherent viscosities of 0.25–0.49 and 0.39–1.19 dL/g, respectively. Most of the polyimides showed distinct glass transitions on their differential scanning calorimetry (DSC) curves, and their glass transition temperatures (T_g) were recorded between 223–253 and 252–288°C, respectively. The results of thermogravimetry (TG) revealed that all the poly(ether sulfone imide)s showed no significant weight loss before 400°C. The methyl-substituted polymers showed higher T_g's but lower initial decomposition temperatures and less solubility compared to the corresponding unsubstituted polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1649–1656, 1998     

A novel class of organosoluble poly(arylene ether nitrile) copolymers containing methyl substituent and cardo xanthene moiety

9,9‐Bis(3‐methyl‐4‐hydroxyphenyl)xanthene (BMHPX) was synthesized in 72% yield by a HCl/ZnCl₂‐catalyzed condensation reaction of xanthenone with excess o‐cresol. Based on this new bisphenol monomer, a series of poly(arylene ether nitrile) (PAEN) and PAEN copolymers containing methyl substituent and cardo xanthene moiety were prepared by the nucleophilic substitution reaction of 2,6‐difluorobenzonitrile (DFBN) with BMHPX and with varying mole proportions of BMHPX to hydroquinone (HQ) (100/0–40/60) using N‐methyl‐2‐pyrrolidone (NMP) as solvent in the presence of anhydrous potassium carbonate. These polymers had inherent viscosities between 0.54 and 0.72 dl/g, and their weight‐average molecular weights and number‐average molecular weights were in the range of 32,600–36,400 and 17,300–18,300, respectively. All PAENs were amorphous and were soluble in dipolar aprotic solvents such as NMP and N,N‐dimethylacetamide (DMAc), and even in THF and chloroform at room temperature. The resulting polymers showed glass transition temperatures (T_g's) between 213–226°C, and the T_g values of the copolymers were found to increase with increase of the BMHPX units content in the polymer. Thermogravimetric studies showed that all the polymers were stable up to 404°C, with 10% weight loss temperatures ranging from 444 to 455°C, and char yields of 52–58% at 700°C in nitrogen. All new PAENs could be cast into transparent, strong, and flexible films with tensile strengths of 102–120 MPa, elongations at break of 14–18%, and tensile moduli of 3.3–3.7 GPa. Copyright © 2011 John Wiley & Sons, Ltd.     

A novel synthesis of polyethers with pendant hydroxyl groups by polyaddition of bis(oxetane)s with bis(phenol)s

The polyaddition of 1,4-bis[(3-ethyl-3-oxetanyl)methoxymethyl]benzene (BEOB) with 3,3′,5,5′-tetrachlorobisphenol A (TCBPA) was examined with or without catalysts. High molecular weight polymer (polymers 1) (M_n = 13,600) with pendant primary hydroxyl groups was obtained in a 99% yield without any gel products when the reaction was performed with 5 mol % of tetraphenylphosphonium bromide as a catalyst in NMP at 160°C for 96 h. However, when the reaction was carried out without a catalyst under the same conditions, a low molecular weight polymer (M_n = 3200) was obtained in a 51% yield. The structure of the resulting polymer was confirmed by IR, ¹H-NMR, and ¹³C-NMR spectra. In this reaction system, it was also found that tetraphenylphosphonium iodide and crown ether complexes such as 18-crown-6 (18-C-6)/KBr and 18-C-6/KI have high catalytic activity. Polyadditions of 1,4-bis[(3-methyl-3-oxetanyl)methoxymethyl]benzene with TCBPA and BEOB with 3,3′,5,5′-tetrabromobisphenol-S were also examined, and corresponding polymers (polymers 2 and 3) were obtained in good yields. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2781–2790, 1999     

Kinetics of the polycondensation and copolycondensation of bis(3‐hydroxypropyl) terephthalate and bis(4‐hydroxybutyl) terephthalate

The kinetics of the polycondensation and copolycondensation reactions of bis(3‐hydroxypropyl) terephthalate (BHPT) and bis(4‐hydroxybutyl) terephthalate (BHBT) as monomers were investigated at 270 °C in the presence of titanium tetrabutoxide as a catalyst. BHPT was prepared by the ester interchange reaction of dimethyl terephthalate and 1,3‐propanediol (1,3‐PD). Through the same method adopted for BHPT synthesis, BHBT was prepared with 1,4‐butanediol instead of 1,3‐PD. With second‐order kinetics applied for polycondensation, the rate constants of the polycondensation of BHPT and BHBT, k₁₁ and k₂₂, were calculated to be 4.08 and 4.18 min^?1, respectively. The rate constants of the cross reactions in the copolycondensation of BHPT and BHBT, k₁₂ and k₂₁, were calculated with results obtained from proton nuclear magnetic resonance spectroscopy analysis. The rate constants during the copolycondensation of BHPT and BHBT at 270 °C decreased in the order k₁₂ > k₂₂ > k₁₁ > k₂₁, indicating that the reactivity of BHBT was larger than that of BHPT at 270 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2435–2441, 2002     

(Diisopropylamido) bis (methylcyclopentadienyl) lanthanides as single-component initiators for polymerization of methyl methacrylate

It was first found that (diisopropylamido)bis(methylcyclopentadienyl)lanthanides (MeC₅H₄)₂LnN(i-Pr)₂(THF) (Ln = Yb ( 1 ), Er ( 2 ), Y ( 3 )) exhibit extremely high catalytic activity in the polymerization of methyl methacrylate. The reactions can be carried out over a quite broad range of polymerization temperatures from -78 to 40°C. The catalytic activity of the complexes increases with an increase of ionic radii of the metal elements, i.e. Y > Er > Yb. The results of GPC (gel permeation chromatography) indicate that the number-average molecular weights (M_n) of polymers obtained exceed 100 × 10³ and the molecular weight distribution (M_w/M_n) becomes broad with the increase of temperature. Furthermore highly syndiotactic PMMA (87.7%) can be obtained by lowering the reaction temperature to −78°C. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1593–1597, 1998     

Synthesis and properties of new polyamides derived from 2,2‐bis[4‐[2‐(4‐aminophenoxy)ethoxy]phenyl]sulfone by direct polycondensation

A series of new polyamides containing both sulfone and oxyethylene moieties in the polymer chain was prepared by the direct polycondensation of the diamine monomer 2,2‐bis[4‐[2‐(4‐aminophenoxy)ethoxy]phenyl]sulfone (BAEPS) and various aromatic dicarboxylic acids in N‐methyl‐2‐pyrrolidinone (NMP) using triphenyl phosphite and pyridine as condensing agents. Polymers were produced with inherent viscosities of 0.30–0.60 dl/g and identified by elemental analysis, and infrared and nuclear magnetic resonance spectra. Most of the polymers were readily dissolved in polar solvents such as NMP, dimethylsulfoxide, N,N‐dimethylacetamide, N,N‐dimethylformamide and m‐cresol at room temperature. Polymers containing rigid and symmetric p‐phenylene, naphthalene and p‐biphenylene moieties revealed a crystalline nature and showed no solubility in organic solvents. These polyamides had 10% weight loss temperatures ranging between 423 and 465 °C in nitrogen atmosphere and glass transition temperatures between 170 and 305 °C. The polymers with crystallinity nature exhibited melting endotherms (T_m) below 386 °C in differential scanning calorimetry trace. Copyright © 1999 John Wiley & Sons, Ltd.     

Synthesis and properties of novel aromatic poly(o-hydroxy amide)s and polybenzoxazoles based on the bis(ether benzoyl chloride)s from hydroquinone and its methyl-, tert-butyl-, and phenyl-substituted derivatives

Four series of poly(o-hydroxy amide)s were prepared by the low-temperature solution polycondensation of the bis(ether benzoyl chloride)s extended from hydroquinone and its methyl-, tert-butyl-, or phenyl-substituted derivatives with three bis(o-aminophenol)s. Most of the poly(o-hydroxy amide)s displayed an amorphous nature, were readily soluble in various polar solvents such as N,N-dimethylacetamide (DMAc), and could be solution-cast into flexible and tough films. These poly(o-hydroxy amide)s had glass transition temperatures (T_g) in the range of 152–185°C and could be thermally cyclodehydrated into the corresponding polybenzoxazoles approximately in the region of 200–400°C, as evidenced by the DSC thermograms. The thermally converted benzoxazole polymers exhibited T_gs in the range of 215–247°C and did not show significant weight loss before 500°C either in nitrogen or in air. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2129–2136, 1999     

Synthesis and Properties of Novel Poly（amine ether）s

Using aromatic bis（4-bromophenyl） ether and various aromatic diamines as the monomers, a series of novel poly（amine ether）s （PAEs） have been synthesized via palladium-catalyzed aryl amination, which is the Hartwig-Buchwald polycondensation reaction. Their structures were characterized by means of elemental analysis, FT-IR, 1^H NMR and UV-Vis spectroscopy. The results show a good agreement with the proposed structures. Their general properties were studied by DSC and TG and it＇s obvious that they show high glass transition temperatures （Tg〉200 ℃）, good thermal stability with high decomposition temperatures （TD〉500℃） and excellent solubility. The mechanical behavior of these polymers suggested that they could be considered a new class of high-performance polymers.     

Synthesis,characterization, and chiroptical property of optically active poly(urea-urethane)s

Five new optically active poly(urea-urethane)s were synthesized by solution polyaddition of (1S,2S)-(+)-2-amino-3-methoxy-1-phenyl-1-propanol ( 4 ) with diisocyanates (diphenylmethane-4,4′-diisocyanate, toluene-2,4-diisocyanate, hexamethylene diisocyanate, isophorone diisocyanate, m-xylylene diisocyanate) at 80°C for 60 h. In some cases, the reaction mixture transformed into a gel when cooled to room temperature. The reduced viscosities are between 0.14 and 0.63 dL/g depending on the solvents and diisocyanates. Thermal behaviors of these polymers were studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The T_g and crystallization temperature (T_c) were in the range of 80–200°C and 220–238°C, respectively. Thermal decomposition started at about 275°C, and the residual weights at 400°C were 15–60% depending on the polymers. The conformation of the polymers in film state was studied by circular dichroism (CD) spectra, by comparison with the corresponding model compounds which were synthesized from 4 and phenyl isocyanate or propyl isocyanate. Polymers derived from aromatic diisocyanates formed as ordered conformation in the film state, while those from aliphatic diisocyanates did not. After packing as chiral stationary phases of high-performance liquid chromatography (HPLC), the polymers showed selective resolution to trans-stilbene oxide and trans-1,2-cyclopentanedicarboxanilide. © 1993 John Wiley & Sons, Inc.     

Palladium(II) Chloride Interaction with Chelating BIS(Phosphine Sulfides). Effect of the Ligand Structure on the Complex Geometry

Abstract

Interaction of PdCl₂ in chloroform with bis(phosphine sulfides) Ph₂P(S)?X?P(S)Ph₂ (X?CH₂, C(CH₃)₂, CH₂CH₂, NH, S, and SCH₂S) has been studied. Mechanism of the reaction has been found to vary dramatically with the identity of X. The structures of the resultant complexes were evaluated by UV and IR spectroscopy. Crystal structures were were determined by X-ray diffraction for two of the compounds (A: [Ph₂P(S)?(CH₂)₂?P(S)Ph₂]PdCl₂ · CH₃CN, P2₁/n, Z = 4, a = 10.104(2), b = 20.939(4), c = 14.034(3) Å, γ = 102.54(2)· B: [Ph₂P(S)?N?P(S)Ph₂]₂Pd · 2CHCl₃, Pl, Z = 1, a = 9.539(1), b = 12.333(3), c = 12.866 Å, α = 111.83(2)°, β = 96.70(3)° γ = 99.84(3)°).     

Poly(phenyl methacrylate) and poly(1‐naphthyl methacrylate) prepared in microemulsions

Phenyl methacrylate and 1‐naphthyl methacrylate were polymerized in microemulsions using stearyltrimethylammonium chloride, cetyltrimethylammonium bromide, and a mixture of nonionic Triton surfactants to form latexes that were 20–30 nm in diameter. A temperature of 70 °C was needed to obtain polymers using thermal initiation. The tacticities of poly(phenyl methacrylate) (PPhMA) (55% rr) and poly(1‐naphthyl methacrylate) (P‐1‐NM) (47% rr) were the same as those of the polymers prepared in toluene solutions. The weight average molecular weights were 1 × 10⁶ and 5 × 10⁵ g/mol for PPhMA and P‐1‐NM prepared in microemulsions with very broad distributions. PPhMA samples from microemulsions and solution had the same T_g = 127 °C. P‐1‐NM from microemulsions had T_g = 145–147 °C compared with T_g = 142 °C for P‐1‐NM from solution. The molecular weights and the glass‐transition temperatures of both PPhMA and P‐1‐NM from microemulsions are substantially higher than any previously reported. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 519–524, 2001     

Synthesis and properties of novel aromatic polyhydrazides and poly(amide–hydrazide)s based on the bis(ether benzoic acid)s from hydroquinone and substituted hydroquinones

4,4′‐(1,4‐Phenylenedioxy)dibenzoic acid as well as the 2‐methyl‐, 2‐tert‐butyl‐, or 2‐phenyl‐substituted derivatives of this dicarboxylic acid were synthesized in two main steps from p‐fluorobenzonitrile and hydroquinone or its methyl‐, tert‐butyl‐, or phenyl‐substituted derivatives. Polyhydrazides and poly(amide–hydrazide)s were prepared from these bis(ether benzoic acid)s or their diacyl chlorides with terephthalic dihydrazide, isophthalic dihydrazide, or p‐aminobenzoyl hydrazide by means of the phosphorylation reaction or low‐temperature solution polycondensation. Most of the hydrazide polymers and copolymers are amorphous and readily soluble in various polar solvents such as N‐methyl‐2‐pyrrolidone (NMP) and dimethyl sulfoxide. They could be solution‐cast into transparent, flexible, and tough films. These polyhydrazides and poly(amide–hydrazide)s had T_gs in the range of 167–237°C and could be thermally cyclodehydrated into the corresponding poly(1,3,4‐oxadiazole)s and poly(amide–1,3,4‐oxadiazole)s approximately in the region of 250–350°C, as evidenced by the DSC thermograms. All the tert‐butyl‐substituted oxadiazole polymers and those derived from isophthalic dihydrazide were organic soluble. The thermally converted oxadiazole polymers exhibited T_gs in the range of 208–243°C and did not show significant weight loss before 450°C either in nitrogen or in air. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1169–1181, 1999     

Organosoluble and colorless fluorinated poly(ether imide)s from 1,2‐bis(3,4‐dicarboxyphenoxy)benzene dianhydride and trifluoromethyl‐substituted aromatic bis(ether amine)s

A series of novel aromatic poly(ether imide)s (PEI) containing ortho‐catenated phenylene rings and pendant trifluoromethyl group have been prepared from 1,2‐bis(3,4‐dicarboxyphenoxy)benzene dianhydride (1) with seven trifluoromethyl‐substituted aromatic bis(ether amine)s ( 2a‐g ) via a conventional two‐stage process that included ring‐opening polyaddition to form the poly(amic acid)s followed by chemical imidization to the polyimides. These PEIs had inherent viscosities in the range of 0.45–1.17 dL/g that corresponded to weight–average and number–average molecular weights (by gel‐permeation chromatography) of 42,000–102,000 and 28,500–67,500, respectively. All the PEIs were readily soluble in many organic solvents and could be solution‐cast into transparent, flexible, and strong films. These films were essentially colorless; they had a very low yellowness index of 4.34–6.55 and an UV–vis absorption cut‐off wavelength at 361–370 nm. The PEIs exhibited moderate‐to‐high glass‐transition temperatures (T_g) in the range of 185–270 °C, softening temperatures (T_s) in the range of 184–275 °C, and 10% weight loss temperatures higher than 466 °C in nitrogen or in air. They also showed low moisture absorptions of 0.49–0.70% and low dielectric constants of 2.78–3.26 (measured at 10 kHz). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3092–3102, 2006     

Synthesis and characterization of new highly organosoluble poly(etherimide)s derived from 1,1‐bis{4‐[4‐(3,4‐dicarboxyphenoxy)phenyl]‐4‐phenylcyclohexane} dianhydride

A new bulky pendent bis(ether anhydride), 1,1‐bis[4‐(4‐dicarboxyphenoxy)phenyl]‐4‐phenylcyclohexane dianhydride, was prepared in three steps, starting from the nitrodisplacement of 1,1‐bis(4‐hydroxyphenyl)‐4‐phenylcyclohexane with 4‐nitrophthalonitrile to form bis(ether dinitrile), followed by alkaline hydrolysis of the bis(ether dinitrile) and subsequent dehydration of the resulting bis(ether diacid). A series of new poly(ether imide)s were prepared from the bis(ether anhydride) with various diamines by a conventional two‐stage synthesis including polyaddition and subsequent chemical cyclodehydration. The resulting poly(ether imide)s had inherent viscosities of 0.50–0.73 dL g^?1. The gel permeation chromatography measurements revealed that the polymers had number‐average and weight‐average molecular weights of up to 57,000 and 130,000, respectively. All the polymers showed typical amorphous diffraction patterns. All of the poly(ether imide)s showed excellent solubility in comparison with the other polyimides derived from adamantane, norbornane, cyclododecane, and methanohexahydroindane and were readily dissolved in various solvents such as N‐methyl‐2‐pyrrolidinone, N,N‐dimethylacetamide (DMAc), N,N‐dimethylformamide, pyridine, cyclohexanone, tetrahydrofuran, and even chloroform. These polymers had glass‐transition temperatures of 226–255 °C. Most of the polymers could be dissolved in chloroform in as high as a 30 wt % concentration. Thermogravimetric analysis showed that all polymers were stable up to 450 °C, with 10% weight losses recorded from 458 to 497 °C in nitrogen. These transparent, tough, and flexible polymer films could be obtained by solution casting from DMAc solutions. These polymer films had tensile strengths of 79–103 MPa and tensile moduli of 1.5–2.1 GPa. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2066–2074, 2002     

Preparation of HPEEK by Oligomer A2+B3 Approach

A series of hyperbranched poly(ether ether ketones) with different chain length between branching point (L) were prepared using a A₂+B₃ methodology, in which the A₂ is hydroxyl‐terminated PEEK oligomer. The L affects the properties of the polymers such as the inherent viscosity, the degree of crystallinity, the thermal properties of the polymers etc. The polymer with a L₂≈8 had T _g (122.4°C), T _c (200.2°C), and broad T _m (247.4°C). With the increment of L, up to the point L₂≈20 and L₂≈35, the polymers become semi‐crystalline, with a melting point of 300.9°C and 317.9°C, respectively. Their wide angle X‐ray scattering (WAXS) pattern indicated that their crystal structure is exactly the same as that of the linear homopolymer.     

Synthesis and characterization of poly(3,3 bis(azidomethyl)oxetane‐co‐ε‐caprolactone)s

The quasi‐living cationic copolymerization of 3,3‐bis(chloromethyl)oxetane (BCMO) and ε‐caprolactone (ε‐CL), using boron trifluoride etherate as catalyst and 1,4‐butanediol as coinitiator, was investigated in methylene chloride at 0°C. The resulting hydroxyl‐ended copolymers exhibit a narrow molecular weight polydispersity and a functionality of about 2. The reactivity ratios of BCMO (0.26) and ε‐CL (0.47), and the T_g of the copolymers, indicate their statistical character. The synthesis of poly(3,3‐bis(azidomethyl)oxetane‐co‐ε‐caprolactone) from poly(BCMO‐co‐ε‐CL) via the substitution of the chlorine atoms by azide groups, using sodium azide in DMSO at 110°C, occurs without any degradation, but the copolymers decompose at about 240°C. All polymers were characterized by vapor pressure osmometry or steric exclusion chromatography, ¹H‐NMR and FTIR spectroscopies, and DSC. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1027–1039, 1999     

Synthesis and characterization of poly(butylene terephthalates) modified by hydroquinone bis(2-hydroxyethyl)ether

A series of thermoplastic poly(butylene-co-hydroquinone bis(2-hydroxyethyl)ether terephthalates) (PBHT), with different molar ratios of hydroquinone bis(2-hydroxyethyl)ether (HQEE)/1,4-butanediol 9/91, 18/82 and 27/73, were synthesized via melt polycondensation. The compositions, thermodynamics and crystallization properties of the obtained copolyesters were characterized in detail by ¹H NMR, differential scanning calorimeters (DSC), thermogravimetric analysis (TGA) and X-ray diffraction (XRD). These results showed that the PBHTs were successfully synthesized, and the incorporation of the HQEE group significantly improved thermal properties of the polymers. However, HQEE did not change the crystal structure of PBT. The T_m values of the copolymers decreased (from 208?°C to 174?°C) with increasing content of HQEE segments, on the contrary, T_g values increased (from 37?°C to 43?°C). The temperatures for 5% weight loss did not decrease and appeared at a range of 373–377?°C.     

Syntheses and properties of new aromatic polybenzoxazoles bearing ether and phenylethylidene or 1‐phenyl‐2,2,2‐trifluoroethylidene linkages

Two new bis(ether acyl chloride)s, 1,1‐bis[4‐(4‐chloroformylphenoxy)phenyl]‐1‐phenylethane and 1,1‐bis[4‐(4‐chloroformylphenoxy)phenyl]‐1‐phenyl‐2,2,2‐trifluoroethane, were prepared from readily available reagents. Aromatic polybenzoxazoles with both ether and phenylethylidene or 1‐phenyl‐2,2,2‐trifluoroethylidene linkages between phenylene units were obtained by a conventional two‐step procedure including the low‐temperature solution polycondensation of the bis(ether acyl chloride)s with three bis(o‐aminophenol)s, yielding poly(o‐hydroxyamide) precursors, and subsequent thermal cyclodehydration. The intermediate poly(o‐hydroxyamide)s exhibited inherent viscosities of 0.39–0.98 dL/g. All of the poly(o‐hydroxyamide)s were amorphous and soluble in polar organic solvents such as N,N‐dimethylacetamide, and most of them could afford flexible and tough films via solvent casting. The poly(o‐hydroxyamide)s exhibited glass‐transition temperatures (T_g's) of 129–194 °C and could be thermally converted into corresponding polybenzoxazoles in the solid state at temperatures higher than 300 °C. All the polybenzoxazoles were amorphous and showed an enhanced T_g but a dramatically decreased solubility with to respect to their poly(o‐hydroxyamide) precursors. They exhibited T_g's of 216–236 °C through differential scanning calorimetry and were stable up to 500 °C in nitrogen or air, with 10% weight‐loss temperatures being recorded between 538 and 562 °C in nitrogen or air. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 914–921, 2003     

Polycarbazole Copolymers from 3-(4-Fluorobenzoyl)carbazole and 4,4′-Biphenol via Combined C-N and C-O Coupling Reactions with Activated Difluorides

3-(4-Fluorobenzoyl)carbazole was synthesized by a Friedel-Crafts reaction of carbazole with 4-fluorobenzoylchloride. ¹H-NMR and MALDI-TOF MS confirmed the structure and the purity. Copolymers of these NH/OH-containing monomers were prepared with 4, 4′-biphenol and bis(4-fluorophenyl)sulfone as comonomers by combined C-O and C-N coupling reactions with activated difluorides. These copolymers were soluble in N-methylpyrrolidinone (NMP), dimethylsulfoxide (DMSO), N,N-dimethylacetamide (DMAc) and dimethylformamide (DMF). The inherent viscosities of the copolymers in NMP solutions at 30°C were all around 0.8 dL/g. They could be easily cast into tough films from NMP solutions. The copolymers exhibited T_gs ranging from 238°C to 282°C. Thermal stabilities by TGA showed no weight loss below 400°C and the temperatures of 5% weight loss ranged from 535°C to 558°C. The homopolymer of 3-(4-fluorobenzoyl)carbazole was insoluble in common solvents and had a T_g of 332°C, and temperature of 5% weight loss of 560°C. UV-VIS absorption and fluorescence of the polymers are also presented.     

A novel palladium catalyst for the polymerization of propargyl alcohol

Homogeneous polymerization of propargyl alcohol (OHP) with Pd (C?CCH₂OH)₂(PPh₃)₂ [Pd?C] catalyst in CHCl₃-CH₃OH mixed solvent system has been investigated. [Pd?C] was found to be a novel effective catalyst for the OHP polymerization. Some features, kinetic behavior, and effect of solvent for the OHP polymerization are described and discussed. The overall polymerization activation energy was found to be 75.6kJ/mol and the rate equation can be expressed as R_p = k_p[OHP] [Pd?C]^0.7, where k_p = 3.14 × 10^-4 L^0.7/ mol^0.7 S (60°C). Polypropargyl alcohol (POHP) obtained is a brown powder with a number-average molecular weight (M?_n) of 10³-2 × 10³, and soluble in MeOH, DMF, and DMSO. Conducting properties of the resulting POHP were investigated. © 1994 John Wiley & Sons, Inc.