Annealing effects on the thermal properties of liquid crystalline polyurethanes

This work is a continuation of our earlier investigations of liquid crystalline polyurethanes prepared from 4,4′-bis(2-hydroxyethoxy) biphenyl (BHBP), 2,4-tolylene diisocyanate (TDI), and poly (oxytetramethylene) diols (PTMO). The annealing effects on the thermal properties of the investigation polyurethanes are presented for three samples with the same BHBP content, different flexible spacer length, and different molecular weight of the polyurethanes. The annealed polyurethanes were investigated by means of DSC, and polarizing microscopy. The results of the thermal analysis show that the temperatures of phase transitions depend on the annealing temperature and time. These dependences are different for different molecular weights. © 1994 John Wiley & Sons, Inc.     

Influence of molecular weight on some properties of liquid crystalline polyurethanes

This investigation extends our previous investigations of liquid crystalline polyurethanes prepared from 4,4′-bis(2-hydroxyethoxy)biphenyl (BHBP), 2,4-tolylene diisocyanate, and poly(oxytetramethylene)diols as the flexible spacers. The influence of molecular weight of investigated polyurethanes on their properties is discussed for two series with the same content of BHBP and different lengths of flexible spacers. The polyurethanes were investigated by means of DSC, polarizing microscopy, x-ray diffractometry, and IR spectroscopy. The molecular weight distribution was determined by GPC. Morphology was studied by the SALS method. The molecular weight of polyurethanes and the length of flexible spacer influence the phase transition temperature and the range of mesophase occurrence. © 1993 John Wiley & Sons, Inc.     

Effect of the poly(oxytetramethylene)diol spacer length on some properties of liquid crystalline polyurethanes

Previous studies on liquid crystalline polyurethanes prepared from 4,4′-bis(2-hydroxyethoxy)biphenyl (BHBP) and 2,4-tolylene diisocyanate (TDI) were continued. In this article, a series of polyurethanes, which differ in the flexible spacer length and BHBP content is described. Poly(oxytetramethylene)diols of different molecular weights (PTMO, M _n = 250, 650, 1000, 2000) were used as flexible spacers. The polyurethanes were investigated by DSC, polarizing microscopy, x-ray diffractometry, and IR spectroscopy. The molecular weight distribution was determined by GPC. The morphology of the polyurethanes was investigated by the SALS method. Partial replacement of BHBP by 25–75 mol % PTMO and the flexible spacer length influence the liquid crystalline properties, the phase transition temperatures, and the range of mesophase occurrence. © 1993 John Wiley & Sons, Inc.     

Segmented polyurethanes with 4,4′-bis-(6-hydroxyhexoxy) biphenyl as chain extender. I. Synthesis and characterization of 2,4-tdi-polyurethanes

Polyurethanes composed of 2,4-toluene diisocyanate (TDI), poly (butylene adipate) diols (PBA) of different molecular weights, and 4,4′-bis-(6-hydroxyhexoxy) biphenyl (BHHBP) were prepared by a two-step solution polymerization process. The polyurethanes were char-acterized by elemental analysis, NMR, and SEC. The thermal properties were investigated by DSC, DMA, and optical polarizing microscopy. Dependent on the molecular weight of the PBA, a shift in the glass transition temperature T_g of the polyurethanes has been observed by DSC and DMA. Polyurethanes based on poly (butylene adipate)s of M_n ～ 2000 exhibited a T_g nearly independent on the hard-segment content up to 50% LC hard segments, indicating the existence of mainly phase separated soft and hard segments. By shortening the PBA chain length up to 1,000 and further to 600, the T_g of the polyester soft-segment phase increases with growing hard-segment content, a consequence of enhanced interaction between the hard and soft segments. This tendency is observed to the greatest extent at polyurethanes with the shortest, polyester diol and can be interpreted as a partial miscibility or compatibility of hard and soft segments. Although in polyurethanes with PBA 2000 the mesophase can be proven at a hard-segment content of ～ 40%, its appearance in polyure-thances prepared with PBA 1000 or PBA 600 requires a hard-segment content > 60%. © 1995 John Wiley & Sons, Inc.     

Synthesis and properties of liquid crystalline polyurethanes

1,4-Bis(p-hydroxybenzoate)phenylene was prepared using 1,4-bis(trimethylsiloxy)benzene and p-hydroxybenzoyl chloride as starting materials. A series of novel 1,4-bis(p-hydroxyalkoxybenzoate)phenylene were synthesized by reaction of 1,4-bis(p-hydroxybenzoate) phenylene with 3-brompropanol and 4-bromobutanol, respectively. The liquid crystal polyurethanes were prepared by 1,4-bis(p-hydroxyalkoxybenzoate)phenylene with MDI (p-methylene diphenylenediisocyanate) and 2,4-TDI(2,4-toluenediisocyanate), respectively. The thermotropic properties, the melting point (T _m) and the isotropization temperature (T _i) of the synthesized polyurethanes were characterized by DSC, IR and POM. It showed that all of the polyurethane polymers exhibited thermotropic liquid crystalline properties between 144°C and 260°C. The transition temperature (T _m and T _i) decreased with an increase in the length of the methylene spacer. __________ Translated from Journal of Qingdao University of Science and Technology, 2006, 27(1) (in Chinese)     

Liquid crystalline lonomers. I. Main-chain liquid crystalline polymer containing pendant sulfonate groups

Liquid crystalline polymers containing sodium sulfonate groups pendant to the polymer backbone were synthesized by an interfacial condensation reaction of brilliant yellow, a sulfonate-containing monomer, with 4,4′-dihydroxy-α,α′-dimethyl benzalazine and a 50/50 mixture of sebacoyl and dodecanedioyl dichlorides. Polymers containing up to ca. 4 mol% brilliant yellow were characterized by elemental analysis and ultraviolet spectroscopy. The polymers were thermally stable to about 300°C, and they exhibited a broad nematic mesophase region of 70–100°C. The solution viscosity behavior in chloroform suggested that intramolecular associations of the sulfonate groups occurred at low polymer concentrations and intermolecular associations predominated at higher concentrations.     

Segmented polyurethanes with 4,4′-bis-(6-hydroxyhexoxy)biphenyl as chain extender. Part 2. Synthesis and properties of MDI-polyurethanes in comparison with 2,4-TDI-polyurethanes

Linear segmented polyurethanes based on poly(butylene adipate)s (PBA) of different molecular weight (M_n 2000, 1000, and 600), 4,4′-diphenylmethane diisocyanate (MDI) and the mesogenic diol 4,4′-bis-(6-hydroxyhexoxy)biphenyl (BHHBP) as well as the unsegmented polyurethane consisting of MDI/BHHBP units have been synthesized and characterized by elemental analysis, ¹³C-NMR and SEC. The thermal behavior and the morphology were studied by DSC, polarizing microscopy, and DMA. The properties of the MDI-polyurethanes were discussed in relation to the BHHBP chain extended 2,4-TDI-polyurethanes and common 1,4-butanediol chain-extended MDI products. MDI polyurethanes based on PBA (M_n 2000) exhibit a glass transition temperature T_g of about −40°C independent of the hard segment content up to ∼50% hard segments. At higher hard segment contents increasing T_gs were observed. Polyurethanes, based on the shorter polyester soft segments PBA (M_n 1000 or 600), reveal an increase in the glass transition temperatures with growing hard segment content. The thermal transitions caused by melting of the MDI/BHHBP hard segment domains are found at 50 K higher temperatures in comparison with the analogous TDI products with mesogenic BHHBP/TDI hard segments. Shortening of the PBA chain length causes a shift of the thermal transitions to lower temperatures. Polarizing microscopy experiments indicate that liquid crystalline behavior is influenced by both the content of mesogenic hard segments and the chain length of the polyester. © 1996 John Wiley & Sons, Inc.     

Thermotropic liquid crystalline polymers with low thermal transitions. II. Low melting thermotropic liquid crystalline homo- and co-polyesters

Thermotropic liquid crystalline (TLC) polymers with low melt transitions are useful for imaging technologies. This is the first report describing thermotropic liquid crystalline copolyesters of low melt transitions comprised of a mesogen with up to three different spacer moieties. We have noted that the smectic mesophase range decreased with increasing amounts of different spacer moieties, without altering the isotropic transition and thereby leading to a broader nematic range. © 1995 John Wiley & Sons, Inc.     

Studies on thermotropic liquid crystalline polyurethanes. II. Synthesis and properties of liquid crystalline polyurethane elastomers

Three series of novel thermotropic liquid crystalline polyurethane elastomers (TLCPUEs) were studied. Hard segments were formed by using hexamethylene diisocyanate (HDI) reacted with a mesogenic unit, benzene-1,4-di(4-iminophenoxy-n-hexanol), which also acted as a chain extender. Three diols: 1,10-decanediol,poly(oxytetramethylene) glycol (PTMEG) M _n = 1000 and PTMEG M _n = 2000 were used as the soft segments. The effects of soft segments of polyurethanes on the liquid crystalline behavior were studied. Higher molecular weight TLCPUEs were obtained by adding 30?50 mol % of mesogenic segments to diisocyanates. In contrast to a conventional chain extender such as 1,2-ethylene glycol or 1,4-butyl glycol, the synthesized polyurethane elastomers exhibited a mesophase transition by using a mesogenic unit as the chain extender. Mesophase was found for all synthesized LC polyurethanes except of polymers H2-A-12 and H2-A-7. The structures and the thermal properties of all synthesized TLCPUEs were studied by using FTIR spectroscopy, wide-angle x-ray diffraction (WAXD) and DSC measurements, a polarizing microscope equipped with a heating stage, dynamic mechanical analysis (DMA), and thermogravimetric analysis (TGA). Mechanical properties were also examined by using a tensilemeter. © 1995 John Wiley & Sons, Inc.     

Electro-optical properties of ferroelectric liquid crystalline polymers

Ferroelectric liquid crystalline polymers (FLCPs) were synthesized. These ferroelectricities were confirmed directly by measuring polarization reversal currents and other electro-optical properties. The smectic layer structure of FLCP was also studied. A chevron structure similar to that of low molecular weight FLC was observed even in an FLCP cell; but the zigzag defects were not so sharp, which means that it is easy to obtain a good orientation even in large-area displays.     

Studies on thermotropic liquid crystalline polymers. XV. Synthesis and properties of liquid crystalline copoly(imide-ester)s

Three series of the thermotropic liquid crystalline copoly(imide-ester)s were prepared by direct polycondensation. The first two series of the copoly(imide-ester)s were synthesized from N-(4-carboxyphenyl) trimellitimide with N,N-di(hydroxypropyl) pyromellitic diimide and various aromatic diols. The third series of copoly(imide-ester)s were prepared by N-(4-carboxyphenyl) trimellitimide with various imide-diols (methylene spacer = 2–6) and phenyl hydroquinone. The structures and thermal properties of the synthesized poly(imide-ester)s were examined by FTIR spectrum, wide-angle x-ray diffraction (WAXD), differential scanning calorimetry (DSC), thermal optical polarized microscope, and thermogravimetric analysis (TGA). The effects of the structures of the aromatic diols on the thermal properties of the resulting copoly(imide-ester)s were investigated. It was found that most of the copoly(imide-ester)s possessed excellent mesophase stabilities and thermostabilities. The mesophase stabilities of poly(imide-ester)s decreased with the increase of the size of lateral group, and the mesophase range increased with the increase of the amount of PhHQ. No significant odd-even effects were observed between the methylene spacer lengths and transition temperatures. © 1996 John Wiley & Sons, Inc.     

Fully aromatic thermotropic liquid crystalline polyesters of 3-phenyl-4,4′-biphenol with 4,4′-benzophenone dicarboxylic acid

A series of fully aromatic, thermotropic polyesters, derived from 3-phenyl-4,4′-biphenol (MPBP), nonlinear 4,4′-benzophenone dicarboxylic acid (4,4′-BDA), and various other comonomers was prepared by the melt polycondensation method and characterized for their thermotropic liquid crystalline behavior by a variety of experimental techniques. The homopolymer of MPBP with 4,4′-BDA had a fusion temperature (T_f) at 240°C, exhibited a nematic liquid crystalline phase, and had a narrow liquid crystalline range of 60°C. All of the copolyesters of MPBP with 4,4′-BDA and either 30 mol % 4-hydroxybenzoic acid (HBA), 6-hydroxy-2-naphthoic acid (HNA) or 50 mol % terephthalic acid (TA), 2,6-naphthale-nedicarboxylic acid (2,6-NDA) and low T_f values in the range of 210–230°C, exhibited a nematic phase, and had accessible isotropization transitions (T_i) in the range of 320–420°C, respectively. As expected, each of them had a broader range of liquid crystalline phase than the homopolymer. They had a “frozen” nematic, glassy order as determined with the wide-angle X-ray diffraction (WAXD) studies. The morphology of each of the “as-made” polyesters had a fibrous structure as determined with the scanning electron microscopy (SEM), which arises because of the liquid crystalline domains. Moreover, they had higher glass transition temperatures (T_g) in the range of 167–190°C than those of other liquid crystalline polyesters, and excellent thermal stabilities (T_d) in the range of 500–533°C, respectively. © 1995 John Wiley & Sons, Inc.     

Studies on the thermotropic liquid crystalline polycarbonates. II. Synthesis and properties of fully aromatic liquid crystalline polycarbonates

Four series of fully aromatic polycarbonates were prepared by using melt polycondensation from various novel phenylene diphenyl dicarbonates: 1,4-phenylenc diphenyl dicarbonate, 1,3-phenylene diphenyl dicarbonate, methyl-1,4-phenylene diphenyl dicarbonate, and chloro-1,4-phenylene diphenyl dicarbonate with various diols—4,4′-biphenyl diol, hydroquinone, 2,7-naphthalene diol and 1,5-naphthalene diol, respectively. The thermotropic liquid crystalline properties of synthesized polycarbonates were investigated by: (1) examination of the melt birefringence and stir opalescence by a polarizing microscope equipped with a heating stage, (2) characterization by a differential scanning calorimeter (DSC), and (3) analysis of the wide angle x-ray diffraction. It was found that the 1,3-phenylene unit is compensated for the nonlinearity of the carbonate group, and polycarbonates which contain this bent shape unit showed excellent wide mesophase transition in this study. © 1993 John Wiley & Sons, Inc.     

Studies on the thermotropic liquid crystalline polycarbonates. III. Synthesis and properties of fully aromatic liquid crystalline polycarbonates

Four series of fully aromatic thermotropic liquid crystalline polycarbonates were prepared by melt polycondensation from various novel phenylene diphenyl dicarbonates with monomers, such as hydroquinone, methylhydroquinone, chlorohydroquinone, resorcinol, bisphenol A, 4,4′-dihydroxydiphenylsulfone, or phenylhydroquinone, respectively. The thermotropic liquid crystalline properties were studied by polarizing microscope with a heating stage, differential scanning calorimeter (DSC), and wide-angle x-ray diffraction (WAXD). It was found that the nonlinearity of the carbonate group was compensated by resorcinol (1,3-phenylene unit), a bent shape unit. Nematic melts were found for the resulting polycarbonates. © 1993 John Wiley & Sons, Inc.     

Investigations on monotropic liquid crystalline polyurethanes based on biphenylol

2,2′-Azobis-[2-cyano-(4-ethylphenol)] (ABCP) was prepared from parahydroxyacetophenone, using hydrazine sulfate and sodium cyanide. Biphenylol ester of ABCP, 2,2′-azobis-[2-p-biphenyloxy-(4-ethylphenol)] (BECP) was synthesized via the acid route. Combined liquid crystalline polyurethanes (CLCPUs) were synthesized from 1,6-diisocyanatohexane (HDI) and BECP in dimethylformamide (DMF) at 110°C under nitrogen atmosphere. The effect of partial replacement of BECP by 4,4′-dihydroxy biphenyl (DHBP) on liquid crystalline (LC) properties was studied. The polymers were characterized by proton and ¹³C NMR, FTIR, and UV spectroscopy. Elemental analysis were done for determining the percentage content of C, H, and N and the molecular weights of the polymers were determined by gel permeation chromatography (GPC). Thermogravimetric investigations (TGA) of the polyurethanes (PUs) were performed to study the decomposition. The LC nature of the PUs was confirmed by differential scanning calorimetry (DSC) and X-ray diffraction (XRD). Cross-polarized optical microscopy studies demonstrated the existence of two distinct crystalline morphologies, a spherulitic morphology with high mole ratio of DHBP and a thread-like crystalline morphology with that of BECP. All the PUs synthesized showed a LC nature with a wide temperature range. Partial replacement of BECP by DHBP changed the mesomorphic nature, transition temperature, and temperature range of the mesophase. © 1995 John Wiley & Sons, Inc.     

Fully aromatic thermotropic liquid crystalline homopolyesters of 3,4′-benzophenone dicarboxylic acid

A series of fully aromatic, thermotropic homopolyesters, derived from 3,4′-benzophenone dicarboxylic acid and various aromatic diols, was prepared by the melt polycondensation method and examined for thermotropic behavior by a variety of experimental techniques. The aromatic diols used in the study were hydroquinone, 2,6-, 1,4-, 1,5-, 2,3-, and 2,7-naphthalenediol isomers. All of the homopolyesters of 3,4′-benzophenone dicarboxylic acid with aromatic diols (except that with 2,7-naphthalenediol) formed a nematic LC phase in the melt. They had the glass transition temperatures (T_g) in the range of 133–164°C, the melting transitions (T_m) in the range 305–360°C and the high thermal stabilities (T_d) in the range of 410–483°C. The 2,6-naphthalenediol based homopolymer had the highest T_m (360°C) and the 2,3-naphthalenediol based homopolymer had the lowest T_m (305°C) among all of the homopolymers of naphthalenediol isomers. © 1994 John Wiley & Sons, Inc.     

Thermal conductivity and thermal expansivity of thermotropic liquid crystalline polymers

The thermal conductivity and thermal expansivity of a thermotropic liquid crystalline copolyesteramide with draw ratio λ from 1.3 to 15 have been measured parallel and perpendicular to the draw direction from 120 to 430 K. The sharp rise in the axial thermal conductivity K_par; and the drastic drop in the axial expansivity α_∥ at low λ, and the saturation of these two quantities at λ > 4 arise from the corresponding increase in the degree of chain orientation revealed by wide-angle x-ray diffraction. In the transverse direction, the thermal conductivity and expansivity exhibit the opposite trends but the changes are relatively small. The draw ratio dependences of the thermal conductivity and expansivity agree reasonably with the predictions of the aggregate model. At high orientation, K_par; of the copolyesteramide is slightly higher than that of polypropylene but one order of magnitude lower than that of polyethylene. In common with other highly oriented polymers such as the lyotropic liquid crystalline polymer, Kevlar 49, and flexible chain polymer, polyethylene, α_par; of the copolyesteramide is negative, with a room temperature value differing from those of Kevlar 49 and polyethylene by less than 50%. Both the axial and transverse expansivity show transitions at about 390 and 270 K, which are associated with large-scale segmental motions of the chains and local motions of the naphthalene units, respectively. ©1995 John Wiley & Sons, Inc.     

Studies on thermotropic liquid crystalline polymer. XI. Effect of amide group on thermotropic liquid crystalline polymer properties

A series of poly(azomethine)s containing amide, ether, or ester groups was prepared by the condensation of dialdehydes with various diamines. The thermotropic liquid crystalline properties were examined by DSC and microscopic observations. The effects of the number and position of amide groups, which are attached to the rigid segment, on the thermotropic liquid crystalline properties of the homo-and copoly(amide-azomethine-ether)s were also investigated in this study. The copolymerization took place by changing the amount of amide group to obtain copoly(amide-azomethine) ( P13 and P14 ) which exhibit thermotropic liquid crystalline properties. The poly(azomethine)s containing ether or ester groups also exhibited thermotropic liquid crystalline properties. © 1993 John Wiley & Sons, Inc.