分子结构对聚芳醚酮薄膜透气性的影响

分子结构对聚芳醚酮薄膜透气性的影响王忠刚，陈天禄，徐纪平（中国科学院长春应用化学研究所长春１３００２２）关键词聚芳醚酮，气体分离膜，结构－性能关系为了改善聚合物薄膜的透气性能，开发具有高透气性和高选择性的膜材料，人们对膜分子结构与透气性能间的关系进行...     

The effect of aryl nitration on gas sorption and permeation in polysulfone

CO_2, CH_4, O_2, and N₂ permeability and solubility of unmodified and aryl-nitrated polysulfone were determined at 35°C and pressures up to 20 atm. The degree of nitration was varied from 0 to 2 nitro groups per repeat unit. The permeability and diffusion coefficients for all gases decreased with increasing degree of nitro substitution. The decrease in gas diffusivity is attributed to a combination of decreased fractional free volume and decreased torsional mobility with increasing degree of substitution. The solubilities of N_2, O_2, and CH₄ do not show a systematic dependence on degree of substitution. However, CO₂ solubility apparently goes through a minimum as the degree of substitution is increased. CO₂ solubility may be influenced by a competition between increases in polymer polarity (favoring higher solubility) and lower free volume (favoring lower solubility) that accompanies increases in the polar nitro substituent concentration. CO₂/CH₄ solubility selectivity increases monotonically as the degree of substitution increases. CO₂/CH₄ permselectivity and diffusivity selectivity increased with increasing degree of substitution. © 1995 John Wiley & Sons, Inc.     

Gas permeability and permselectivity of fluorinated polybenzoxazoles

Gas permeability and permselectivity are investigated for polybenzoxazoles from bis(3-amino-4-hydroxyphenyl)-1,1,1,3,3,3-hexafluoropropane (BAHHP) and aromatic diacid chlorides. Effects of thermal cyclization on the permeation properties are also investigated. The polybenzoxazole from BAHHP and 4,4′-(1,1,1,3,3,3-hexafluoroisopropylidene)dibenzoyl chloride (HFDB) displays high performance for CO₂/CH₄ separation ( $ {\rm P}_{{\rm CO}_2 } $ = 6.1 × 10^?9 cm³ (STP) cm^?1 s^?1 cm-Hg^?1, and $ {{{\rm P}_{{\rm CO}_2 } } \mathord{\left/ {\vphantom {{{\rm P}_{{\rm CO}_2 } } {{\rm P}_{{\rm CH}_4 } }}} \right. \kern-\nulldelimiterspace} {{\rm P}_{{\rm CH}_4 } }} $ = 38 at 35°C). The polybenzoxazole from BAHHP and 2,6-naphthalene dicarbonyl chloride displays high performance for H₂/CO or H₂/CH₄ separation ( $ {\rm P}_{{\rm H}_2 } $ = 2.4 × 10^?9 cm³ (STP) cm^?1 s^?1 cm-Hg^?1, $ {{{\rm P}_{{\rm H}_2 } } \mathord{\left/ {\vphantom {{{\rm P}_{{\rm H}_2 } } {{\rm P}_{{\rm CO}} }}} \right. \kern-\nulldelimiterspace} {{\rm P}_{{\rm CO}} }} $ = 71, and $ {{{\rm P}_{{\rm H}_2 } } \mathord{\left/ {\vphantom {{{\rm P}_{{\rm H}_2 } } {{\rm P}_{{\rm CH}_{\rm 4} } }}} \right. \kern-\nulldelimiterspace} {{\rm P}_{{\rm CH}_{\rm 4} } }} $ = 250). Permeation properties for the polybenzoxazole from BAHHP and HFDB are close to those for a polyimide of similar chemical structure. The permeation properties are discussed in connection with packing density and local segmental mobility. © 1992 John Wiley & Sons, Inc.     

Gas permeability and permselectivity of polyimides with large aromatic rings

Polyimides with large aromatic rings were prepared from 3,6-diaminocarbazole (CDA), N-ethyl-3,6-diaminocarbazole (ECDA), 2,7-diaminofluorene (DAF), 2,7-diaminofluorenon (DAFO), and dimethyl-3,7-diaminodibenzothiophene-5,5-dioxide (DDBT) with 2-bis(2,4-dicarboxyphenyl) hexafluoropropane dianhydride (6FDA) and 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA). Their physical properties, including gas permeability and permselectivity, were investigated in comparison with those of the related polyimides from 1,3-phenylenediamine (mPD). Glass transition temperatures of the polyimides with large aromatic rings were much higher than those of the mPD-based polyimides as a result of increased rigidity of the former polymer chains. With changing diamine from mPD to the large aromatic diamines, charge transfer (CT) interaction between the moieties of acid anhydride and diamine seems to be enhanced, judging from the red shift of absorption edge of the polyimide films and the red shift of CT excitation band of the 6FDA-based polyimides in solution. Fraction of free space (V_F) was a little smaller for the polyimides with large aromatic rings except DDBT than for the mPD-based polyimides, probably because of enhancement in polymer chain-chain interactions as a result of the increased CT interaction. The DDBT-based polyimides had large V_F than the mPD-based polyimides because of the nonplanar structure of neighboring dibenzothiophene-5,5-dioxide and imide rings. For the 6FDA-based polyimides, permeability coefficients to H₂, O₂, N₂, CO₂, and CH₄ were in the order, DAFO < mPD ～ DAF < CDA < ECDA < DDBT. As for the membrane performance for H₂/CH₄, CO₂/CH₄, and O₂/N₂ systems, it is significant to change diamine from mPD to DDBT or CDA, but not to DAF or DAFO. The DDBT-based polyimides were excellent for H₂/CH₄ and CO₂/CH₄ separations. © 1995 John Wiley & Sons, Inc.     

Blood compatibility and permeability of heparin-modified polysulfone as potential membrane for simultaneous hemodialysis and LDL removal

Heparin was covalently immobilized on PSf membranes to obtain a dialysis membrane with high affinity for LDL. WCA and streaming potential measurements were performed to investigate wettability and surface charge of the membranes. The morphology of the membranes was investigated by SEM. An ELISA was used to measure the adsorption and desorption of LDL on plain and modified PSf. Blood compatibility was studied by measurement of thrombin time, partial thromboplastin time, kallikrein activity and platelet adhesion. It was found that the blood compatibility of the membrane was improved by covalent immobilization of heparin at its surface. However, PSf-Hep membrane showed higher flux recovery after BSA solution filtration, which revealed antifouling property of PSf-Hep membranes.     

Subnanometer hole properties of CO2-exposed polysulfone studied by positron annihilation lifetime spectroscopy

Positron annihilation lifetime (PAL) spectroscopy has been employed to study subnanometer hole properties in polysulfone (PSF). In this study, hole properties of size, fraction, and distribution of PSF exposed to CO₂ are reported. In the PSF/CO₂ system, the hole size and fraction significantly increase and the free-volume distribution broadens as a function of CO₂ pressure in the range of 0–1000 psi. Hysteresis in hole properties is observed during CO₂ sorption/desorption cycle. The high sensitivity of PAL results due to CO₂ exposure in PSF is explained in terms of the microstructural changes in the polymer matrix, i.e., filling penetrant and plasticization, gas hydrostatic pressure effect, and creation of free volumes and holes. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 3049–3056, 1998     

XPS and atomic force microscopy of plasma-treated polysulfone

Surface treatment of polysulfone by O₂, H₂, He, Ne, Ar, and CF₄ nonisothermal glow discharges has been investigated by x-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). The chemical and topographical modification of the surface is found to be strongly influenced by the type of feed gas employed. © 1996 John Wiley & Sons, Inc.     

Syntheses and permselectivity properties of polysulfones based on bisphenol A and 1, 1 bi‐2 naphthol

Polysulfone copolymers based on mixtures of bisphenol A, BPA, and 1,1 bi‐2 naphthol, BN, diols have been synthesized and their gas permeability coefficients and selectivity separation factors for O₂/N₂ and CO₂/CH₄, at 5 atm and 35 °C, have been measured in a standard permeation cell. The polysulfone copolymers can form flexible thin films suitable for gas separation membranes. The gas selectivity for O₂/N₂ measured for the polysulfone copolymers synthesized with 50 and 70 mol % of BN, with the rest being BPA, in the initial mixture of diols are 6.4 and 6.8, respectively. The corresponding gas permeability coefficients for O₂ are 1.24 and 1.09 Barrers. Compared to the corresponding selectivity and permeability balance reported for polysulfones based on pure BPA, BPA–PSF, the copolymers show a balance that moves in the direction of higher selectivity with small losses in the permeability of the fastest gas. From the glass transition temperature determinations, it is observed that the incorporation of BN in the repeating unit of BPA–PSF inhibits large‐scale segmental motions that are reflected in reductions in the diffusivity coefficients for all gases. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 226–231, 2004     

Gas permeability in rubbery polyphosphazene membranes

The synthesis, characterization, and gas permeability of 10 new polyphosphazenes has been studied. Additionally, the first gas permeation data has been collected on hydrolytically unstable poly[bis-(chloro)phosphazene]. Gases used in this study include CO₂, CH₄, O₂, N₂, H₂, and Ar. CO₂ was the most permeable gas through any of the phosphazenes and a direct correlation between the T_g of the polymer and CO₂ transport was noted with permeability increasing with decreasing polymer T_g. To a lesser degree, permeability of all the other gases studied also yielded increases with decreasing polymer T_g. The trend observed for these new polymers was further supported by published data for other phosphazenes. Furthermore, permeability data for all gases were found to correlate to the gas condensability and the gas critical pressures, except for hydrogen, suggesting that the nature of the gas is also a significant factor for permeation through rubbery phosphazene membranes. Ideal separation factors () for the CO₂/H₂ and CO₂/CH₄ gas pairs were calculated. For CO₂/CH₄, no increase in was observed with decreasing T_g, however increases in were noted for the CO₂/H₂ pair.     

Gas permeability and stability of poly(1-trimethylsilyl-1-propyne-co-1-phenyl-1-propyne) membranes

A significant reduction in the gas permeability of the poly(1-trimethylsilyl-1-propyne) (PMSP) membrane was investigated in terms of the membrane thickness and the storage environment. The effects of physical aging were observed with thinner membranes and under vacuum conditions compared with storage in air. The decrease in the permeability coefficient was dependent on the decrease in the hole saturation constant of Langmuir adsorption (C'_H), which is related to the volume of the microvoids. Physical aging in the PMSP membrane affected not only the glassy domain but also the rubbery one. To stabilize the permeability of the PMSP membrane, a poly(1-trimethylsilyl-1-propyne-co-1-phenyl-1-propyne) [poly(TMSP-co-PP)] membrane was prepared. Poly(TMSP-co-PP) has the same unit of poly(1-phenyl-1-propyne), which membrane has stable permeability. The poly(TMSP-co-PP) with less than 20 mol % PP content was estimated to be a random copolymer based on theoretical gas permeation analysis. In the poly(TMSP-co-PP) membrane, the relation between the PP content and C'_H was similar to the relation between the PP content and the gas permeability. The stability of the permeability was dependent on the PP content. The poly(TMSP-co-PP) membrane containing 10 mol % PP had both high permeability and good stability under some of the aging conditions performed in this work. © 1995 John Wiley & Sons, Inc.     

Electrochemical and structural characterization of sulfonated polysulfone

We describe the synthesis, as well as the electrochemical and structural characterization, of sulfonated polysulfone intended for use in PEM fuel cells. Starting from a commercial polysulfone, we assessed the performance of these prepared ionomers using synthesis protocols compatible with industrial production. The efficiency of the trimethylsilyl chlorosulfonate and chlorosulfonic acid reagents in the sulfonation process was confirmed by ¹H NMR, FTIR, elemental analysis, chemical titration and thermal analysis (DSC and TGA). Chlorosulfonic acid was the most effective sulfonation reagent. However, based on SEC-MALLS, this reagent induced degradation of the backbone that is detrimental to the thermomechanical stability and lifespan of the membranes. The electrical characterization of the membranes was undertaken using impedance spectroscopy in contact with different HCl aqueous solutions at various temperatures. The activation energies, which ranged from 8.2 to 11 kJ/mol, were in agreement with the prevailing proton vehicular mechanism.     

Hydrostatic pressure influence on static dielectric permeability of polymers

The generality of baric changes in static dielectric permeability of polymers for different temperatures of the sample is considered in the present work. It is shown that the initial growth of dielectric permeability is followed by its lowering that arises during the glass transformation of the sample. Formulas that reflect the changes of dielectric permeability under isothermal changes of pressure and isobaric changes of temperature of the sample are obtained. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. B Polym. Phys. 36: 2665–2669, 1998     

Studies on cellulose acetate-carboxylated polysulfone blend ultrafiltration membranes--Part I

Hydrophilic polysulfone ultrafiltration (UF) membranes were prepared from blends of cellulose acetate with carboxylated polysulfone of 0.14 degree of carboxylation. The effects of blend polymer composition on compaction, pure water flux, water content and membrane hydraulic resistance (R_m), have been investigated to evaluate the performance of the membranes. The performance of the blend membranes of various blend polymer compositions were compared with that of membranes prepared from pure cellulose acetate and blends of cellulose acetate and pure polysulfone. The hydrophilic cellulose acetate-carboxylated polysulfone blend UF membranes showed better performance compared to membranes prepared from pure cellulose acetate and blends of cellulose acetate and pure polysulfone.     

Enhanced translational diffusion of rubrene and tetracene in polysulfone

Translational diffusion of tetracene and rubrene in bisphenol A polysulfone (T_g = 460 K) was measured using a holographic fluorescence recovery after photobleaching (FRAP) technique. In the temperature range from 493 to 462 K, probe translation was diffusive and the translational diffusion coefficients varied from 10⁻⁸ to 10⁻¹³ cm²/s. Surprisingly, the observed translational diffusion coefficients showed a weaker temperature dependence than the rotational correlation times of the same probes. Rotational correlation times have the same temperature dependence as the viscoelastic relaxation times characteristic of the rubberlike modulus, while translational relaxation times decouple from the viscoelastic relaxation times. On average, probe molecules are translating larger and larger distances per probe rotation time as the temperature is lowered to T_g. These results can be explained qualitatively in terms of spatially heterogeneous segmental dynamics in the polysulfone matrix. © 1996 John Wiley & Sons, Inc.     

Kinetics of bonded invertase: asymmetric polysulfone membranes

Asymmetric flat ultrafiltration membranes made from bromomethylated polysulfone were used to fix invertase chemically. The invertase reactivity of these membranes was compared with those where enzyme bonding was achieved by reacting bromomethylated polysulfone with ethylene diamine and glutaric dialdehyde which act as spacers. In both cases the invertase fixation was carried out such that its concentration at the surface facing the saccharose feed solution could be neglected The kinetic behavior of the immobilized invertase was modelled by investigating the influence of diffusive and of convective transport across the membranes. Considering axial back-mixing of the convective flow within the membrane, the reaction can be simulated at low substrate concentrations. The heterogeneous distribution of the enzyme within the membrane matrix prevents us from calculating the kinetic data of the enzymatic reaction over the entire range of parameters.     

Fractionation of casein hydrolysates using polysulfone ultrafiltration hollow fiber membranes

The objective of this study was to characterize the fractionation profile of casein hydrolysates obtained with polysulfone hollow fiber ultrafiltration membranes. The two-step ultrafiltration process developed by Turgeon and Gauthier [J. Food Sci., 55 (1990) 106] was used: a caseinate solution was submitted to proteolysis with chymotrypsin or trypsin, and the reaction mixture (RM) was subsequently ultrafiltered using a 30 kDa (MWCO) hollow-fiber polysulfone membrane. The total hydrolysate permeating from this first step was further fractionated using a 1 kDa (MWCO) membrane, producing the mixture of polypeptides (retentate) and the amino acid fraction (permeate). The effect of enzyme specificity and of membrane retentivitiy on the total composition (total nitrogen, fat, lactose, minerals) and amino acid profile of the fractions was studied. The overall composition of the fractions was not significantly affected by the nature of the enzyme but the degree of hydrolysis and the molecular weight distribution profile analyses showed a marked effect of the enzyme specificity, with trypsin giving a larger proportion of small peptides (< 200 Da) in the mixture of polypeptides. Amino acid profile analyses provided useful information on the phenomena governing the fractionation of amino acids with a polysulfone membrane: (1) the target amino acids of the enzyme are concentrated in the permeate as a result of their presence in all peptides produced by hydrolysis, (2) polar amino acids are retained by the membrane, (3) non-polar amino acids are not selectively rejected by the membrane. Our results suggest that the charge/hydrophobicity balance of the peptides produced is the predominant factor determining the fractionation of casein hydrolysates.     

Thermal stability and toughening of epoxy resin with polysulfone resin

The cure behavior, thermal stability, and mechanical properties of diglycidylether of bisphenol A (DGEBA)/polysulfone (PSF) blends initiated by 1 wt % N‐benzylpyrazinium hexafluoroantimonate as a cationic latent catalyst were investigated. The DGEBA/PSF content was varied within 100/0–100/40 wt %. Latent properties were studied through the measurement of the conversion as a function of the curing temperature, and the cure activation energy (E_a) was studied by the Kissinger method with a dynamic differential scanning calorimetry analysis. The thermal stabilities, largely based on the integral procedural decomposition temperature (IPDT) and decomposed activation energy (E_t), were investigated by the measurement of thermogravimetric analysis. For the mechanical properties of the casting specimens, the critical stress intensity factor (K_IC) test was performed, and their fractured surfaces were examined with scanning electron microscopy. E_a, IPDT, E_t, and K_IC increased with PSF increasing in the neat epoxy resin up to 30 wt %. However, there was a marginal decrease in the blend system in both the thermal and mechanical properties due to the phase separation between DGEBA and PSF. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 121–128, 2001     

Gas transport properties of substituted PEEKs

Tert-butyl and di-tert-butyl were added as pendant groups to the ether-ether phenyl ring of poly(ether ether ketone), PEEK. tert-butyl PEEK, TBPEEK, was amorphous and di-tert-butyl PEEK, DBPEEK, was semicrystalline. However, a 2 : 1 random copolymer of TBPEEK and DBPEEK, TBDBPEEK, was amorphous. Gas transport of N₂, O₂, CH₄, and CO₂ through amorphous films of PEEK, TBPEEK, TBDBPEEK, and tetramethylbiphenyl PEEK were determined at 35°C and at pressures to about 15 atm. The results support previous observations that tert-butyl and tetramethylbiphenyl groups are very effective in disrupting chain packing in the polymer. For the present polymers, these substitutions led to a 5–18-fold increase in permeability, and, in some cases, at no loss in permselectivity. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 2355–2362, 1997     

Covalent heparin modification of a polysulfone flat sheet membrane for selective removal of low-density lipoproteins: a simple and versatile method

A simple, convenient and economical method for the heparinization of PSf membranes is described, with the aim of preparing an LDL adsorber for simultaneous LDL apheresis and hemodialysis. An atmospheric pressure glow discharge generator is used to activate the PSf membrane surface, with subsequent chemical binding of heparin in the presence of EDC and NHS. ATR-FTIR spectroscopy and XPS measurements confirm successful surface modification. The PSf-Hep membrane shows good blood compatibility, with a relatively low amount and normal morphology of adherent platelets. ELISA results indicate that the PSf-Hep membrane exhibits excellent selective affinity for LDL in single and binary protein solutions, suggesting potential applications in hemodialysis with simultaneous LDL removal.     

Modification of polysulfone hollow fiber ultrafiltration membranes using hyperbranched polyesters with different molecular weights

A series of hyperbranched polyesters (HBPEs) using trimethylolpropane (TMP) as a core were synthesized via an esterification reaction, and the molecular weights of these HBPEs were 1600, 2260, 3370, and 5170 g/mol, respectively. Then, these HBPEs were added into dope solutions to prepare PSf hollow fiber membranes via a wet‐spinning method. When the HBPE molecule weight increased from 1600 to 5170 g/mol, the initial viscosities of the PSf–HBPE–PEG400–DMAc dope solutions increased, and the shear‐thinning phenomenon of these dope solutions became increasingly obvious. When these dope solutions were immersed into the deionized water, the demixing rate increased with an increase in the HBPE molecule weight at first and then decreased; this results in the increase of membrane porosity and the coexistence of finger‐like and sponge‐like structures. With the addition of HBPE, the start pure water contact angle and the mean effective pore size of the membranes decreased, and the J_w increased. For the mechanical properties of the membranes, the breaking strength and the elongation of the membranes also increased. Copyright © 2015 John Wiley & Sons, Ltd.