Oriented noncrystalline structure in PET fibers prepared with threadline modification process

The development of an oriented noncrystalline phase in a semicrystalline polymer filament has been studied via X-ray scattering. These unique PET fibers contain a relatively high noncrystalline content and also have high tenacity, high modulus, and low breaking elongation. Fiber properties were found to be very responsive to the oriented amorphous phase content. This phase was utilized for interpreting noncrystalline orientation in PET fibers produced by a new extrusion technique. Here, the oriented noncrystalline regions in a series of PET fibers varies from 6% to 63%, depending strongly on the production conditions. In particular, samples produced with a newly developed threadline modification process possess a high content of oriented noncrystalline polymer. Measurements such as dynamic and static mechanical properties have been performed on various samples, and these properties are related to the oriented noncrystalline phase. The results provide direct evidence for the existence of highly oriented noncrystalline material in these unique PET fibers spun with a threadline modification process. © 1996 John Wiley & Sons, Inc.     

PET伸直链结晶体的研究进展

对聚对苯二甲酸乙二醇酯（PET）在特定的结晶条件下是否生成伸直链晶体进行了论证，系统总结了伸直链晶体形成的证据，并讨论了PET伸直链晶体形成的机理。     

Unique crystalline structure and performance of poly(ethylene terephthalate) melt spun fibers

Modification of the threadline dynamics has effected significant alternations in the structure and improvements in the properties of high-speed melt spun poly(ethylene terephthalate) (PET) fibers. Key process parameters extant in the threadline dynamics, such as temperature, tensile stress, and deformation time, were independently controlled through proper implementation of on-line perturbations. The placement of a liquid isothermal bath in close proximity to the spinneret in the melt spinning threadline provided tremendous increase in the spinning stress while at the same time controlled the filament temperature corresponding to development of the desired fiber structure. Characterization of the fiber structure and physical properties has been carried out using birefringence measurements, density, shrinkage, x-ray diffraction, DSC, FTIR spectroscopy, and tensile tests. The results provided sufficient evidence to support the existence of a unique crystalline morphology that led to the significantly improved tensile properties and excellent dimensional stability of the resulting fibers. This unique crystalline morphology was typically characterized by the presence of a larger amount of extended chain segments and an enhanced molecular connectivity. ©1995 John Wiley & Sons, Inc.     

Thermal Properties and Crystallinity of Thermotropic Liquid Crystalline Copolyesters Prepared from Poly(ethylene terephtalate) (PET) and Rigid Aromatic Units

A series of copolyesters were synthesized by melt‐polycondensation reaction of poly(ethylene terephtalate) (PET) with various proportions of equimolar compositions of p‐acetoxybenzoic acid (p‐ABA), hydroquinone diacetate (HQDA) and terephtalic acid (TPA). Viscosity, liquid crystallinity, thermal properties, degree of crystallinity and thermal stabilitiy of these copolyesters were investigated by Ubbelohde viscometer, hot‐stage polarized light microscopy (PLM), differential scanning calorimetry (DSC), wide‐angle X‐ray diffraction (WAXD) and thermogravimetric analysis (TGA), respectively. On the basis of viscosity measurement, it was observed that intrinsic viscosity values of the copolyesters are increased regularly with increasing amounts of aromatic units (p‐ABA, HQDA and TPA) in the polymer chain. Thermotropic liquid crystalline behavior was observed in the copolyesters containing over 50 mol% of rigid p‐ABA/HQDA/TPA aromatic units. DSC analysis of the anisotropic copolyesters revealed broad and weak endotherms associated with the nematic phases, and the melting temperatures were found to be in the processable region. As the mol% of PET in the polymer chain increased, the specific enthalpies of fusion and the degree of crystallinity of the copolyesters were also increased regularly.     

Study of the thermal evolution of the cyclic‐oligomer formation in a cyclic‐oligomer‐free PET

A low percentage of cyclic oligomers can be found in poly(ethylene terephthalate) (PET) from its synthesis onward. In this article, a cyclic‐oligomer‐free PET (COFP) obtained by solvent extraction was used to study the thermodynamics of the re‐formation of cyclics from the melt. The cyclic‐oligomer content re‐increased into molten COFP, finally reaching an equilibrium. An analysis of the fraction of the re‐formed cyclic oligomers showed that a majority of cyclic trimer (60–70%) was found at the equilibrium. Before the establishment of the equilibrium, an unusual behavior was observed in the relative proportion of cyclic trimer and tetramer during the first steps of their formation that was probably due to a competition between kinetic and thermodynamic products. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 416–422, 2000     

Thermal properties of post-consumer PET processed in presence of phosphites

Thermal properties of recycled triphenylphosphite (TPP) chain extended poly(ethylene terephthalate) (PET) was investigated. As the TPP concentration increases, both reaction residues and molecular mass increase affecting significantly the thermal properties and crystallization behavior of the material. The presence of TPP residues did not affect the crystalline melt temperature (T _m), but modified the glass transition temperature (T _g), the crystallization temperature on heating (T _hc) and the crystallization temperature on cooling (T _cc). In the samples submitted to extraction with acetone, the properties were influenced by molecular mass changes, probably due to the presence of some insoluble reaction residue. The thermal stability of the sample purified by extraction after chain extension was comparable to that of the non-extended sample when heating was carried out under nitrogen atmosphere.This revised version was published online in November 2005 with corrections to the Cover Date.     

PET分子量对PET/PC共混体系高压结晶行为的影响

以往高压合成的聚合物伸直链晶体尺寸较小且合成时间过长,不能满足单晶应用的要求。加入10wt%PC于不同分子量的PET中,采用自制高压装置,制备共混体系,用WAXD,SEM,DSC等表征手段,研究了PET/PC共混体系在高压下的结晶行为。研究结果表明:通过PET/PC体系在高压下化学反应诱导的自组装,不同分子量PET的PET/PC共混体系均在较短的时间内生成了尺寸较大的聚酯伸直链晶体,对应于三斜晶系,其中PET/PC体系最适于大尺寸伸直链晶体的合成,仅需6hr时间即生成PE需200hr方可合成的40μm厚度的伸直链晶体。同时提出了PET1/PC体系中伸直链晶体高温下缺陷自我修复模型。     

Rapid crystallization and thermoreversible gelation of poly(ethylene terephthalate) in polymer/oligomer binary system

Poly(ethylene terephthalate) (PET) was rapidly crystallized through thermoreversible gelation in a liquid ethylene glycol oligomer or in epoxy resin. The solutions formed gel rapidly on cooling. Polarized light microscopy and small-angle light scattering showed that these gels contain large, regular PET spherulites. The gels may be formed by two consecutive processes: the phase separation and crystallization, and gelation by formation of a three-dimensional PET network in the oligomer solvents, where the nodes of the network are PET spherulites. The crystallinity of PET recovered from polymer/oligomer gels is near 72% measured by wide-angle X-ray diffraction method, which is about 20% higher than PET samples crystallized by solution crystallization in small molecule solvent, high temperature annealing, and stretching techniques. It takes only a few minutes to form the highly crystalline phase PET in the PET/oligomer system, and the crystallinity of the dried gel is independent of the concentration of the original solution. Excimer-fluoresence and Raman spectroscopic studies indicated that PET recovered from the gels are in an ordered state with few chain entanglements. The entanglement density of the recovered PET recovered from a 20 wt % solution in ethylene glycol oligomer is as low as that of freeze-extracted PET from a 0.5 wt % solution in phenol. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1219–1225, 1998     

LC-polyimides XXXIV. Noncrystalline thermotropic copoly(ester-imide)s based on PET

Four series of copoly(ester-imide)s (co-PEIs) were prepared by transesterification of poly(ethylene terephthalate), PET, with N-(4-carboxyphenyl)trimellitimide and an acetylated diphenol. Methylhydroquinone, tert. butylhydroquinone, phenylhydroquinone, and 2,7-dihydroxynaphthalene were used as diphenols. The chemical structures of these co-PEIs were characterized by chemical analyses, ¹H-, and ¹³C-NMR spectra. A low degree of crystallinity was observed when the PET content was above 85% mol %. Between 60 and 80 mol % PET all co-PEIs are biphasic, whereas below 60 mol % the co-PEIs form a homogeneous nematic melt and below the glass transition temperature (T_g) a nematic glass. The T_gs vary continously with the molar composition but the mechanical properties drop sharply when the nematic phase changes to an isotropic one. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1813–1820, 1998     

聚对苯二甲酸二甲酯/聚2,5-呋喃二甲酸二甲酯嵌段聚酯的合成与表征

以生物基单体2,5-呋喃二甲酸、乙二醇为原料合成聚2,5-呋喃二甲酸乙二醇酯(PEF)。采用熔融酯交换法以PEF聚酯部分取代聚对苯二甲酸乙二醇酯(PET),制备了系列PET-b-PEF嵌段共聚酯。通过核磁共振仪(NMR)、差示扫描量热仪(DSC)、热失重仪(TGA)、X射线衍射仪(XRD)等技术手段表征了共聚酯的结构和性能。结果表明,该系列共聚酯的玻璃化转变温度(Tg)在75.8~80.3℃之间,且随着PEF链段质量分数的增加,PET-b-PEF嵌段共聚酯的Tg先降低后升高,结晶度和熔融温度逐渐降低。当PEF链段含量高于15%时,共聚酯没有结晶峰。该系列共聚酯具有良好的热稳定性,起始分解温度在392.2~407.9℃之间,与所制备的PET起始分解温度403.3℃接近。且当共聚酯中PEF链段含量低于15%时,起始分解温度均在407℃左右,优于PET的热稳定性。     

Reactive compatibilization of blends of PET and PP modified by GMA grafting

The melt radical grafting of glycidyl methacrylate (GMA) onto isotactic polypropylene (PP) was carried out in Brabender internal mixer and the influence of reaction procedure, radical initiator concentration and addition of co-monomer (styrene) on the grafting efficiency was examined. The viscosity, the thermal behaviour and melt rheology of PP-g-GMA samples was then analysed as a function of grafted GMA content. Blends of poly(ethylene terephthalate) (PET) with PP and PP-g-GMA (5.2 wt% GMA), prepared in internal mixer, were characterised by SEM, DSC and melt viscosimetry. The morphological analysis of PET/PP-g-GMA blends (80/20, 50/50 w/w) pointed out a marked improvement of phase dispersion (with particle size of about 0.6 μm for 80/20 blend) and interfacial adhesion, as compared to non-compatibilized PET/PP blend. The results of mixing torque and thermal analysis supported the occurrence of in-situ compatibilization reaction between epoxy groups of GMA modified PP and carboxyl end-groups of PET in the melt.     

Rotor-synchronized two-dimensional 13C CP/MAS NMR studies of the orientational order of polymers 2. Melt-extruded poly(ethylene terephthalate) fibers

Determination of the orientational order of morphological components in polyethylene terephthalate (PET) is sought through quantitative application of two-dimensional rotor synchronized magic angle spinning (ROSMAS) ¹³C NMR technique. Previous study in our laboratories had established a procedure for resolution of the carbonyl carbon (CA) and glycol ethylene carbon (GE) resonances into those corresponding to four morphological components.¹ Due to paucity of sidebands in the GE resonances, the focus has been on the CA resonances in this attempt to obtain orientation distributions. A set of PET fibers possessing a broad range of crystalline and orientational order has been used to infer the meaning of NMR-based orientation measurements vis-a-vis other techniques. A surprising finding of this study is the observation that the orientational orders of the broad component in the ¹³C CP/MAS spectrum and the narrow component are very similar in these fibers. ©1995 John Wiley & Sons, Inc.     

Thermal,crystallization, mechanical,and rheological characteristics of poly(trimethylene terephthalate)/poly(ethylene terephthalate) blends

Blends of poly(trimethylene terephthalate) (PTT) and poly(ethylene terephthalate) in the amorphous state were miscible in all of the blend compositions studied, as evidenced by a single, composition‐dependent glass‐transition temperature observed for each blend composition. The variation in the glass‐transition temperature with the blend composition was well predicted by the Gordon–Taylor equation, with the fitting parameter being 0.91. The cold‐crystallization (peak) temperature decreased with an increasing PTT content, whereas the melt‐crystallization (peak) temperature decreased with an increasing amount of the minor component. The subsequent melting behavior after both cold and melt crystallizations exhibited melting point depression behavior in which the observed melting temperatures decreased with an increasing amount of the minor component of the blends. During crystallization, the pure components crystallized simultaneously just to form their own crystals. The blend having 50 wt % of PTT showed the lowest apparent degree of crystallinity and the lowest tensile‐strength values. The steady shear viscosity values for the pure components and the blends decreased slightly with an increasing shear rate (within the shear rate range of 0.25–25 s^?1); those of the blends were lower than those of the pure components. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 676–686, 2004     

用X-射线衍射法测定聚对苯二甲酸乙二醇酯/聚对苯二甲酸丁二醇酯共混体系的结晶度

结晶度是表征聚合物性质的重要参数,它对聚合物的物理和机械性能有很大影响,在测定聚合物的结晶度的各种方法中,X-射线衍射法的意义明确且应用最为广泛。然而,用X-射线衍射法测定聚合物结晶度绝大部分只限于单组份体系,用于共混体系的报道尚不     

PBT／PET共混体系非晶区的相容性

利用ＰＢＴ、ＰＥＴ的特性参数，通过不同组份比ＰＢＴ／ＰＥＴ共混体系的混合自由能△Ｇｍ，从理论上预测其相容性。在一定的条件下△Ｇｍ＜０，ＰＢＴ、ＰＥＴ可以相容。对不同组份比共混体系的玻璃化转变过程从分子链段运动的角度进行分析。     

Shape Memory Properties in Poly(ethylene oxide)–Poly(ethylene terephthalate) Copolymers

Memory effects of several copolymers of poly(ethylene oxide) (PEO) and poly(ethylene terephthalate) (PET) were illustrated with photos, determined with shrinkage experiments and characterized by the recovery of samples to their original figures. Copolymers of appropriate composition could undertake an approximately full recovery which is tightly related to the annealing temperature at which shrinkage of samples occurs to some extent. Melting and recrystallization of PEO segments may be responsible for the memory effect. The memory properties of samples almost kept unchanged after many fatigue cycles (e.g. 15–20 cycles), which could make these copolymers useful in practical applications as novel shape memory materials. © 1997 John Wiley & Sons, Ltd.     

Phase separation in semicrystalline blends of poly(phenylene sulfide) and poly(ethylene terephthalate). II. Effect of poly(phenylene sulfide) homopolymer solubilization of PPS‐graft‐PET copolymer on morphology and crystallization behavior

The morphology and crystallization behavior of poly(phenylene sulfide) (PPS) and poly(ethylene terephthalate) (PET) blends compatibilized with graft copolymers were investigated. PPS‐blend‐PET compositions were prepared in which the viscosity of the PPS phase was varied to assess the morphological implications. The dispersed‐phase particle size was influenced by the combined effects of the ratio of dispersed‐phase viscosity to continuous‐phase viscosity and reduced interfacial tension due to the addition of PPS‐graft‐PET copolymers to the blends. In the absence of graft copolymer, the finest dispersion of PET in a continuous phase of PPS was achieved when the viscosity ratio between blend components was nearly equal. As expected, PET particle sizes increased as the viscosity ratio diverged from unity. When graft copolymers were added to the blends, fine dispersions of PET were achieved despite large differences in the viscosities of PPS and PET homopolymers. The interfacial activity of the PPS‐graft‐PET copolymer appeared to be related to the molecular weight ratio of the PPS homopolymer to the PPS segment of the graft copolymer (M_H/M_A). With increasing solubilization of the PPS graft copolymer segment by the PPS homopolymer, the particle size of the PET dispersed phase decreased. In crystallization studies, the presence of the PPS phase increased the crystallization temperature of PET. The magnitude of the increase in the PET crystallization temperature coincided with the viscosity ratio and extent of the PPS homopolymer solubilization in the graft copolymer. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 599–610, 2000     

Electron microscopy of high‐pressure crystallized poly(ethylene terephthalate)

The high‐pressure crystallized poly(ethylene terephthalate) samples were investigated with scanning electron microscopy. The striation appearance, which is the most common feature of polymer extended‐chain crystals, was clearly observed. Poly(ethylene terephthalate) extended‐chain crystals with thickness up to 17 m were obtained at high pressure. Fibrous crystals were also formed at high pressure. The fracture behaviors, which affected the exposure of the striations, were also discussed. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1612–1616, 2000     

Evaluation of the orientation coefficient for the c axis in poly(ethylene terephthalate) fibers

The literature methods for the determination of the mean of the crystallite orientation distribution for the c axis, that is of the orientation coefficient f_c, for poly(ethylene terephthalate) (PET), based on the azimuthal scan of the (1 05) reflection, are reviewed. These methods appear unsuitable for samples presenting the “tilted orientation”; that is, the molecular chain axis inclined by some degrees with respect to the fiber axis, as frequently occurs for PET fibers. A new method for the determination of f_c for PET, also based on the azimuthal scan of the (1 05) reflection (which can be applied also to samples with “tilted orientation”), is proposed. This method implies as a first step the determination of the tilt angle, for which the complete fiber pattern is required. A possible simplifying assumption, which allows use of the sole azimuthal (1 05) profile and makes the method also applicable to poorly oriented samples (for which the determination of the tilt angle is not easy), is also discussed. © 1995 John Wiley & Sons, Inc.