Ionic miscibility enhancement via microion elimination in sulfonated polystyrene/poly(ethyl-acrylate-co-4-vinyl pyridine) ionomer blends

Miscibility enhancement of ionomer/ionomer and ionomer/polymeric acid systems is studied on the polymer pairs of poly(styrene-co-tetramethyl ammonium styrenesulfonate)/poly(ethyl acrylate-co-N-methyl-4-vinylpyridinium iodide) and poly(styrene-co-styrenesulfonic acid)/poly(ethyl acrylate-co-N-methyl-4-vinylpyridinium iodide). NMR and dynamic mechanical results show that in these blends direct macroion–macroion interaction can be achieved with the elimination of microcounterions from the polymer chains. Ion-ion attraction leads to a miscibility enhancement comparable to that of the previously reported proton transfer blends; a miscible blend is obtained with ca. 5 mol% of ions in the polymers.     

Miscibility of cellulose acetate with vinyl polymers

Binary blend films of cellulose acetate (CA) with flexible syntheticpolymers including poly(vinyl acetate) (PVAc), poly(N-vinyl pyrrolidone) (PVP),and poly(N-vinyl pyrrolidone-co-vinyl acetate) [P(VP-co-VAc)] were preparedfrommixed polymer solutions by solvent evaporation. Thermal analysis by DSC showedthat CA of any degree of substitution (DS) was not miscible with PVAc, but CAwith DS less than 2.8 was miscible with PVP to form homogeneous blends. Thestate of mixing in CA/P(VP-co-VAc) blends was affected not only by the DS of CAbut also by the VP/VAc copolymer composition. As far as CAs of DS<2.8 andP(VP-co-VAc)s with VP contents more than ca. 25 mol% were used,theCA/copolymer blends mostly showed a miscible behaviour irrespective of themixing ratio. FT-IR measurements for the miscible blends of CA/PVP andCA/P(VP-co-VAc) revealed the presence of hydrogen-bonding interactions betweenresidual hydroxyls of CA and carbonyls of N-vinyl pyrrolidone units, which maybe assumed to largely contribute to the good miscibility.     

Influence of copolymer composition of polyestercarbonate on miscibility with poly(butylene terephthalate)

Blends of poly(butylene terephthalate) (PBT) and polyestercarbonate (PEC), copolyesters consisting of polycarbonate (PC) and polyarylate (PAr), have been studied by thermal analysis to determine miscibility. The PBT blends with PAr and PEC containing 30 wt % of carbonate unit or less appeared to be miscible, and the tendency for stable single‐phase was observed to decrease as the content of carbonate unit in PEC copolymer increased. As determined with the crystalline phase behavior, the miscibility of PEC with PBT appeared to have a maximum around 10 ∼ 30 wt % of carbonate content in PEC copolymer, and this result was attributed to the internal repulsion effect between ester and carbonate repeating units in PEC copolymer. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 803–811, 2000     

Characterization of the interaction energies for polystyrene blends with various methacrylate polymers

The binary interaction energies between styrene and various methacrylates were determined from newly examined phase boundaries with lattice–fluid theory. Because the blends of polystyrene (PS) and poly(cyclohexylmethacrylate) (PCHMA) were only miscible at high molecular weights when the blends were prepared by solution casting from tetrahydrofuran, we examined the miscibility of other blends by changing the molecular weights of PS or methacrylate polymers. On the basis of the phase‐separation temperature caused by the lower critical solution temperature, the miscibility of PS with the various methacrylates appeared to be in the order PCHMA > poly(n‐propyl‐methacrylate) (PnPMA) > poly(ethyl methacrylate) (PEMA) > poly(n‐butyl‐methacrylate) (PnBMA) > poly(iso‐butyl‐methacrylate) > poly(methyl methacrylate) (PMMA) > poly(tert‐butyl methacrylate), and the branching of butylmethacrylate appeared to decrease the miscibility with PS. The interaction energies between PS with various methacrylates obtained from phase boundaries with lattice–fluid theory reached minimum value corresponding to the styrene/n‐propylmethacrylate interaction. They were in the order PnPMA < PEMA < PCHMA < PnBMA < PMMA. The difference in the order of miscibility and interaction energies might be attributed to the terms related to the compressibility. The phase‐separation temperatures calculated with the interaction energies obtained here indicated that the PS/PEMA and PS/PnPMA blends at high molecular weights were miscible, whereas the PS/PnBMA blends were immiscible at high molecular weights. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2666–2677, 2000     

甲基丙烯酸甲酯-苯乙烯无规共聚物与聚偏氟乙烯共混体系的结晶行为和力学性能

本文研究了甲基丙烯酸甲酯-苯乙烯(MS)无规共聚物与聚偏氟乙烯(PVF_2)共混体系的结晶行为和力学性能。MS含量及MS中St的含量均对PVF_2的结晶行为有较大的影响,它显示出非晶材料向结晶材料转变过程中所特有的力学性质不连续现象。研究结果表明了PVF_2/MS共混物作为一种改性材料应用的可能性。     

Compatibilizing effect of a graft copolymer on bacterial poly(3‐hydroxybutyrate)/poly(methyl methacrylate) blends

Blends of isotactic (natural) poly(3‐hydroxybutyrate) (PHB) and poly(methyl methacrylate) (PMMA) are partially miscible, and PHB in excess of 20 wt % segregates as a partially crystalline pure phase. Copolymers containing atactic PHB chains grafted onto a PMMA backbone are used to compatibilize phase‐separated PHB/PMMA blends. Two poly(methyl methacrylate‐g‐hydroxybutyrate) [P(MMA‐g‐HB)] copolymers with different grafting densities and the same length of the grafted chain have been investigated. The copolymer with higher grafting density, containing 67 mol % hydroxybutyrate units, has a beneficial effect on the mechanical properties of PHB/PMMA blends with 30–50% PHB content, which show a remarkable increase in ductility. The main effect of copolymer addition is the inhibition of PHB crystallization. No compatibilizing effect on PHB/PMMA blends with PHB contents higher than 50% is observed with various amounts of P(MMA‐g‐HB) copolymer. In these blends, the graft copolymer is not able to prevent PHB crystallization, and the ternary PHB/PMMA/P(MMA‐g‐HB) blends remain crystalline and brittle. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1390–1399, 2002     

Miscibility windows for poly(styrene-co-vinyl phenol) blends with poly(alkyl methacrylate)s: Further comparisons of theoretical predictions to FTIR experimental data

We report the results of theoretical and experimental studies of styrene-co-vinyl phenol (STVPh) copolymer blends with poly(n-octyl methacrylate) (POMA) and poly(n-decyl methacrylate) (PDMA). This work is a natural extension to our recently reported studies of the phase behavior of analogous STVPh blends with poly(n-butyl methacrylate) (PBMA) and poly(n-hexyl methacrylate) (PHMA) where we employed an association model together with parameters obtained from studies of miscible homopolymer blends. The theoretically calculated miscibility maps for STVPh copolymer blends with the homologous series of poly(n-alkyl methacrylates) (PAMA) are in fine agreement with experiment.     

Phase behavior of tetramethylpolycarbonate blends with styrene‐based methacrylate copolymers and their interaction energies

The miscibility of tetramethylpolycarbonate (TMPC) blends with styrenic copolymers containing various methacrylates was examined, and the interaction energies between TMPC and methacrylate were evaluated from the phase‐separation temperatures of TMPC/copolymer blends with lattice‐fluid theory combined with a binary interaction model. TMPC formed miscible blends with styrenic copolymers containing less than a certain amount of methacrylate, and these miscible blends always exhibited lower critical solution temperature (LCST)‐type phase behavior. The phase‐separation temperatures of TMPC blends with copolymers such as poly(styrene‐co‐methyl methacrylate), poly(styrene‐co‐ethyl methacrylate), poly(styrene‐co‐n‐propyl methacrylate), and poly(styrene‐co‐phenyl methacrylate) increase with methacrylate content, go through a maximum, and decrease, whereas those of TMPC blends with poly(styrene‐co‐n‐butyl methacrylate) and poly(styrene‐co‐cyclohexyl methacrylate) always decrease. The calculated interaction energy for a copolymer–TMPC pair is negative and increases with the methacrylate content in the copolymer. This would seem to contradict the prediction of the binary interaction model, that systems with more favorable energetic interactions have higher LCSTs. A detailed inspection of lattice‐fluid theory was performed to explain such phase behavior. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1288–1297, 2002     

苯乙烯—丙烯酸钠共聚物改性PET结晶行为的研究

本文用DSC和FT-IR方法研究了PET/苯乙烯-丙烯酸钠共聚物共混体系的相溶性、等温结晶动力学、组成、温度等因素对结晶速率、结晶度等结晶行为的影响,并初步探讨了离聚物对PET的作用。     

Characterization of extruded ethylene-vinyl alcohol copolymer based barrier blends with interest in food packaging applications

Based on previous work a number of optimum extruded blends with high contents of a high barrier ethylene-vinyl alcohol copolymer were selected and characterized in terms of phase morphology, water sorption and barrier properties. Blend components were an ethylene vinyl-alcohol copolymer (EVOH with 32 mol% ethylene), an amorphous polyamide (aPA) and a nylon-containing ionomer. A fine two phase structure was found for these blends in all cases. However, Raman spectroscopy results indicated a poor interface interaction between the blend components in the case of the EVOH/aPA blends. Higher interface interaction had been previously found in the dry EVOH/ionomer blends. Equilibrium moisture solubility and diffusion were found to be higher than expected from simple additivity. However, the oxygen transmission rate was found to be clearly lower than expected from the rule of mixtures, particularly under dry conditions, fitting closely a simple Maxwell model.     

Effect of styrene-4-vinyl pyridine diblock copolymer on morphological,thermal, and mechanical properties of poly(2,6-dimethyl-1,4-phenylene ether)/polyethylene ionomer blends

The compatibilizing effects of a styrene-4-vinyl pyridine diblock copolymer on the properties of immiscible poly(2,6-dimethyl-1,4-phenylene ether) (PPE)/polyethylene ionomer (Surlyn) blends are investigated by examining the phase morphology and the thermal and mechanical properties. The block copolymer is synthesized by sequential anionic polymerization at ?78°C and melt-mixed with PPE and Surlyn at 290°C. When a small amount of block copolymer is present, the domain size of the dispersed phase becomes smaller. The tensile strength and elongation at break increase with addition of the block copolymer for PPE-rich matrix blends, whereas the tensile strength increases but the elongation at break decreases for Surlyn-rich matrix blends. These effects are interpreted in terms of the interfacial activity and the reinforcing effect of the block copolymer. From the experimental results, it is concluded that the block copolymer plays a role as an effective compatibilizer for PPE/Surlyn blends. © 1994 John Wiley & Sons, Inc.     

Compatibilizing effect of transesterification product between components in bisphenol-A polycarbonate/poly(ethylene terephthalate) blend

The compatibilizing effect of a random copolymer, which is the transesterification product, on its corresponding blend system of bisphenol-A polycarbonate/poly(ethylene terephthalate) (PC/PET) has been studied using a Differential Scanning Calorimeter and a Phase Contrast Microscope. It was found that after a long time of transesterification between PET and PC (50/50, wt %), the obtained product, that is, TCET random copolymer, is miscible with individual homopolymers of PC and PET. The addition of the TCET copolymer into the immiscible PC/PET blend can make the glass transitions of the PC-rich phase and PET-rich phase approach each other, and eventually merge into a single glass transition when the content of TCET in the ternary mixture reaches 60 wt %. Meanwhile, the phase structure images showed that with the increasing content of the TCET copolymer in the ternary blends, the size of the phase domains decreases and the phase domains further diminish at 60 wt % TCET. All these results proved the compatibilizing effect of TCET copolymer on the PC/PET blends in their ternary mixture. The mechanism of the compatibilizing effect is directly related to the reduction of the interfacial tension between PC-rich and PET-rich phase domains in the presence of increasing amounts of TCET copolymer in the ternary blends. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2960–2972, 1999     

Compatibility and thermodynamic interaction in random copolymer blends

Some random copolymer blends have been found to be miscible in a certain range of copolymer composition even though any combinations of their corresponding homopolymers are not miscible. The opposite case may exist. These two types of miscibility behaviors have been called miscibility and immiscibility windows, respectively. Such two miscibility behaviors were discussed by application of the equation-of-state theory to copolymer systems. The equation-of-state theory gives two kinds of temperature dependences of the interaction parameter X: (a) a U-shaped curve which is always positive regardless of temperature and (b) a function increasing monotonically from negative to positive values. Infinite molecular weight polymer blends are immiscible over all the temperature in the case (a), while in the case (b) two polymers are miscible below a temperature at which X=0. Applying the equation-of-state theory to random copolymer blends in which miscibility changes with the copolymer composition at a certain temperature to be immiscible → miscible → immiscible, two types of dependences of the temperature-X curve can be obtained: (1) (a) → (b) → (a) dependent on the copolymer composition and (2) (b) regardless of the copolymer composition. For the blends in which miscibility changes with the copolymer composition to be miscible → immiscible → miscible, there can be two types: (3) (b) → (a) → (b) and (4) (b) regardless of the copolymer composition. It may be concluded that socalled miscibility and immiscibility windows should be defined by the types (1) and (3), respectively. The equation-of-state theory for random copolymer systems was applied to the real systems. The blends of poly(vinyl acetate-co-vinyl chloride) and poly(ethylene-co-vinyl acetate) were of the type (1), while it was suggested that the blends of poly(vinyl acetate-co-vinyl chloride) and poly(isobutyl methacrylate-co- butyl methacrylate) may be of the type (4) though this system behaved like an immiscibility window at a certain temperature.     

An AFM, XPS and wettability study of the surface heterogeneity of PS/PMMA-r-PMAA demixed thin films

A series of homopolymer/random copolymer blends was used to produce heterogeneous surfaces by demixing in thin films. The chosen homopolymer is polystyrene (PS) and the random copolymer is poly(methyl methacrylate)-r-poly(methacrylic acid) (PMMA-r-PMAA), whose acidic functions could be used as reactive sites in view of further surface functionalization. The proportion of each polymer at the interface was deduced from X-ray photoelectron spectroscopy (XPS) data using, on the one hand, the O/C ratio, and on the other hand, decomposition of the carbon peak of the blends in two components corresponding to the carbon peaks of PS and PMMA-r-PMAA. Combining the information from XPS with atomic force microscopy (AFM) images, water contact angle measurements and PS selective dissolution, it appears that the surfaces obtained from blends with a high PS content (90/10 to 70/30) display pits with a bottom made of PMMA-r-PMAA, randomly distributed in a PS matrix. On the other hand, the surfaces obtained from blends with a low PS content (30/70 to 10/90) display randomly distributed PS islands surrounded by a PMMA-r-PMAA matrix. The characteristics of the heterogeneous films are thought to be governed by the higher affinity of PMMA-r-PMAA for the solvent (dioxane), which leads to the elevation of the PS phase compared to the PMMA-r-PMAA phase, and to surface enrichment in PMMA-r-PMAA.     

Deformation and fracture behavior of polystyrene ionomer and ionomer blends

The deformation and fracture behavior of sulphonated polystyrene ionomers, and of blends of these with polystyrene have been investigated. The microstructure of the ionomer, which varies with ion content, appears to have a significant effect on mechanical properties. Both tensile strength and toughness increase appreciably at ion contents near 5 mol%, where clusters become dominant over ion pairs and multiplets. In blends of the ionomers and polystyrene, phase separation occurs and the ionomer component appears in the form of fine particles dispersed in the polystyrene matrix. These particles possess a greater effective entanglement density than the matrix, as a result of ionic crosslinking, and they provide reinforcement against early craze breakdown and fracture. Tensile strength and fracture energy increase rapidly as the ionomer concentration in the blend is increased and they become essentially independent of blend ratio above about 10 wt% of the ionomer. Tests carried out on thin film specimens of the blends show that the dispersed ionomer particles adhere well to the matrix and contribute to the fracture energy both by inducing matrix crazing and by internal fibrillation within the particles.Dedicated to Professor Hans-Henning Kausch on the occasion of his 60th birthday.     

Interdiffusion measurements of modified poly(arylether sulfone)s using nuclear reaction analysis

The interdiffusion and miscibility behavior of three different types of modified poly(arylether sulfone)s with deuterated poly(arylether sulfone) is studied by depth profiling using the nuclear reaction D(³He, α)p. The diffusion coefficients are found to be in the range of 10⁻¹⁵ and 10⁻¹⁴ cm²/s at 195°C. A random copolymer of poly(arylether sulfone) containing 4,4-bis-(4′-hydroxyphenyl)valeric acid units is only partially miscible with deuterated poly(arylether sulfone) when the comonomer content is 8.8 mol %, whereas blends with comonomer contents of 1.7 and 4.5 mol % are miscible as indicated by complete interdiffusion. The transition from miscibility to immiscibility is caused by repulsive interactions of copolymer segments and can be explained in terms of a mean-field theory of random copolymer blends. Also, poly(arylether sulfone)s grafted with 0.4 wt % maleic anhydride or having pyromellitic anhydride endgroups are miscible with deuterated poly(arylether sulfone)s. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 2083–2091, 1997     

Phase Behaviour of Poly(styrene-co-methacrylic acid)/ Poly(styrene-co-N,N-dimethylacrylamide)/Poly(styrene-co-4-vinylpyridine) Ternary Blends by DSC and FTIR

Summary: we have investigated by DSC and FTIR the miscibility and phase behaviour of binary and ternary blends of different ratios of poly(styrene-co-methacrylic acid) containing 15 mol% of methacrylic acid (SMA15) with poly(styrene-co-N,N-dimethylacrylamide) containing 17 mol% of N,N,-dimethylacrylamide (SAD-17) and poly(styrene- co-4-vinylpyridine) containing 15 mol% of 4-vinylpyridine. SMA15 is miscible with both SAD17 and S4VP15 and interacts more strongly with S4VP15 than with SAD17 as evidenced by the positive deviations from linear average line observed with these blends and the appearance of new bands in the 1800–1550 cm⁻¹ region. This behaviour is known as ΔK effect. The FTIR study confirms that though the specific intermolecular interactions that occurred with each pair of the SMA15/S4VP15 and SMA15/SAD17 binary components are of different strength, they still exist in the ternary blend. Even though the three binary polymer pairs are individually miscible, the ternary system of SMA15/S4VP15/SAD17 exhibits only partial miscibility with small loop of immiscibility due to a significant ΔK effect. These results obtained by DSC and FTIR are in a fair agreement with theoretical prediction applying the Painter-Coleman association model.     

Miscibility maps for copolymer - copolymer blends: A comparison of theoretical predictions to experimental studies of poly(styrene-co-vinyl phenol) blends with poly(ethylene-co-methyl acrylate)

We report the results of theoretical and experimental studies of random amorphous styrene-co-vinyl phenol (STVPh) copolymer blends with ethylene-co-methyl acrylate (EMA). This work is a natural extension to our recently reported studies of the phase behavior of analogous STVPh blends with an homologous series of poly(n-alkyl methacrylate) homopolymers, where we employed an association model together with parameters obtained from studies of miscible homopolymer blends. Here we emphasize that there is no conceptual difference between the average chemical repeat of a random copolymer and that of an analogous repeat unit of a homopolymer containing the same number and type of functional groups. The theoretically calculated miscibility maps for STVPh - EMA copolymer blends are in outstanding agreement with experiment.     

Miscibility of poly(ϵ-caprolactone) and of poly(styrene-co-acrylonitrile) with poly(styrene-co-acrylic acid)

The miscibility of poly (?-caprolactone) (PCL) with poly (styrene-co-acrylic acid) (SAA) and of poly (styrene-co-acrylonitrile) (SAN) with SAA was examined as a function of the comonomer composition in the copolymers. For PCL/SAA blends it was found that PCL is miscible with SAA within a specific range of copolymer compositions. Segmental interaction energy densities were evaluated by analysis of the equilibrium melting point depression and application of a binary interaction model. The results suggest that the intramolecular repulsion in SAA copolymer plays an important role in inducing the miscibility. Additionally, the critical AA content in SAA for the blend to be homogeneous was predicted by correlating the segmental interaction energy densities with the binary interaction model. For SAN/SAA blends, it was also found that SAA is miscible with SAN within a specific range of copolymer compositions. From the binary interaction model, segmental interaction energy denisties between different monomer units were estimated from the miscibility map and were found to be positive for all pairs, indicating that the miscibility of the blends is due to the strong repulsion in the SAA copolymers.     

Blends of glycidyl methacrylate/methyl methacrylate copolymers with poly(vinylidene fluoride)

Blends of glycidyl methacrylate (GMA)/methyl methacrylate (MMA) copolymers with poly (vinylidene fluoride) (PVDF) were found to be miscible when the GMA content of the copolymer is 35.7 wt % or less. The miscible blends did not phase separate upon heating prior to thermal decomposition. The melting point depression method, based on both the Flory-Huggins theory and the equation of state theory of Sanchez-Lacombe, was used to evaluate interaction parameters for each pair. The magnitude of these parameters appears to be much larger than interaction energies evaluated by other methods. Possible reasons for this are discussed. © 1995 John Wiley & Sons, Inc.