Electro-initiated polymerization of acrylonitrile in aqueous acetic acid containing Mn(OAc)2·4H2O and CNCH2COOH

The electro-initiated polymerization of acrylonitrile initiated by the anodic oxidation of an aqueous acid solution (80% HOAc + 20% H₂O) containing Mn(OAc)₂ · 4H₂O/CNCH₂COOH has been investigated in the 30–40°C temperature range. The kinetics and mechanism of the process has been investigated as a function of variables and a suitable mechanism proposed. From the experimental observations the rate of polymerization is seen to be proportional to [An]^1.5I^0.5[Mn⁺²]^0.5 and [CAA]^0.5. The rate of polymerization gradually decreases at a higher applied current. The rate was independent of [CAA]^0.5. The rate of polymerization gradually decreases at a higher applied current. The rate was independent of CAA at high concentration. The average degrees of polymerization (P _n) increases with increasing AN and decreasing [CAA], [Mn⁺²] and applied current, I. The initiation is due to the anodic oxidation of Mn⁺²–CNCH₂COOH complex. Both the initiation of polymerization by the primary radical, viz., CN? C?? COOH as well as the oxidation of the primary radical at the electrode are equally significant reactions and neither can be neglected in comparison with the other. Predominant mutual termination accounts for all the observed data.     

Synthesis and spectroscopic studies of charge transfer complex between dihydroxy-p-benzoquinone and 4-dimethylaminopyridine in different solvents

Charge transfer (CT) complex formation between 4-dimethylaminopyridine (4-DMAP) as the electron donor and 2,5-dihydroxy-p-benzoquinone (DHBQ) as the π-electron acceptor has been investigated spectrophotometrically in methanol (MeOH), ethanol (EtOH) and acetonitrile (AN). The stoichiometry of the complex has been identified by Job’s and photometric titration methods to be 1:1. The Benesi–Hildebrand equation has been applied to estimate the formation constant (K_CT) and molecular extinction coefficient (ε). It was found that the value of K_CT is larger in AN than in MeOH and EtOH. The thermodynamic parameters are in agreement with the K_CT values in that the enthalpy of formation (?ΔH) has a larger value both in EtOH and MeOH than in AN, suggesting higher stability of the complex in EtOH. The complex formed between 4-DMAP and DHBQ has been isolated as a solid and characterised using elemental analysis, FTIR and ¹H NMR measurements. Moreover, it has been found that the formed complex involves proton transfer in addition to CT.     

Vinyl polymerization. Part 268. Polymerization of acrylonitrile initiated by the system of tetramethyl tetrazene and bromoacetic acid

The polymerization of acrylonitrile (AN) initiated by the system of tetramethyl tetrazene (TMT) and bromoacetic acid (BA) in dimethylformamide (DMF) was studied. The TMT–BA system could initiate the polymerization of AN more easily than TMT alone. The polymerization was confirmed to proceed through a radical mechanism. The initial rate of polymerization R_p was expressed by the equation: R_p = [TMT]^0.62-[BA]^0.5[AN]^1.5. The overall activation energy for the polymerization was estimated as 9.4 kcal/mole. In the absence of monomer, the reaction of TMT with BA in DMF was also studied kinetically by measuring the evolution of nitrogen gas. The reaction was first-order in TMT and first-order in BA; the rate data at 49°C were k₂ = 9.1 × 10^?2l./mole-sec., ΔH? = 17.0 kcal/mole, and ΔS? = ? 6.6 eu. In addition, the treatment of TMT with BA in benzene led to the formation of tetramethylhydrazine radical cation, which was identified by its ESR spectrum. On the other hand, the relatively strong interaction between TMT and DMF was observed by absorption spectrophotometry.     

Copper(0)‐mediated radical copolymerization of vinyl acetate and acrylonitrile in DMSO at ambient temperature

In this work, Cu(0)‐mediated radical copolymerization of vinyl acetate (VAc) and acrylonitrile (AN) was explored. The polymerization was carried out at 25°C with 2,2′‐bipyridine as ligand and dimethyl sulfoxide as solvent. The copolymerization proceeded smoothly producing moderately controlled molecular weights at low VAc feed ratios. The high VAc feed ratios generated low polymerization rate and poorly controlled molecular weights. FTIR, ¹H NMR, and differential scanning calorimetry confirmed the successful obtaining of the copolymers. Based on ¹H NMR spectra, the reactivity ratios of VAc and AN were calculated to be 0.003 and 1.605, respectively. This work conveyed the first example for the Cu(0)‐mediated radical polymerization of AN and VAc, wherein VAc cannot be homopolymerized by Cu(0)‐mediated radical polymerization technique. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

含胺基功能性单体的聚合研究——ⅫⅠ.丙烯腈在N-丙烯酰-N′-苯基哌嗪及其聚合物作为增感剂下的光聚合

The photopolymerization of AN by using N-acryloyl-N'-phenylpiperazine (APP) and N-methacryloyl-N'-phenylpiperazine (MPP) as sensitizers under UV irradiation has been investigated. The corresponding polymerization kinetic equations are as follows:Rp [APP]^0.81[AN]^0.61 R_p [MPP]^0.48[AN]^0.77 R_p [P(APP)]^0.53[AN]^0.78 From the fluorescent analysis, it was confirmed that APP, MPP and P(APP) not only initiated the polymerization of AN but also entered into the chains of AN polymer. The photopolymerization mechanism for exciplex formation of AN with above sensitizers was proposed.     

Metal compounds in free-radical processes. III. Polymerization of acrylonitrile initiated by copper (II) nitrate in presence or absence of triphenylphosphine

The bulk polymerization of acrylonitrile (AN) initiated by copper (II) nitrate, Cu(II), in the absence of light has been studied. The rate of the AN polymerization may be expressed in the Cu(II) concentration range from 5 × 10^?4 to 1 × 10^?1 mole 1.^?1 by the equation, R_p = k₅[Cu(II)]^0.68, where k₅ = K_AN[AN]/(1 + K_AN[AN]). From the spectrophotometric measurements the values of 0.70 l./mole and 0.08 l, mole were obtained for the equilibrium constant at 20 and 60°C, respectively, K_AN = [C]/[AN]-[Cu(II)], corresponding to the formation of the complex C from acrylonitrile and copper (II) nitrate. An addition of triphenylphosphine (C₆H₅)₃P into the polymerization system reduces R_p, and no polymerization takes place at all provided [(C₆H₅)₃P]/[Cu-(II)] ≧ 5. The retardation effect of (C₆H₅)₃P on the polymerization of AN initiated by Cu(II) is attributed to a competitive reaction of Cu(II) with (C₆H₅)₃P in which Cu(II) is reduced and the product of this reduction CuNO₃·2(C₆H₅)₃P is inactive with respect to the polymerization of AN.     

STUDIES ON THE POLYMERIZATION OF ACRYLONITRILE INITIATED BY METAVANADATE-CONTAININ G ANION EXCHANGER-THIOUREA REDOX SYSTEM

The polymerization of acrylonitrile (AN) in aqueous nitric acid initiated by metavanadate-containing anion exchange resin (PV)-thiourea (TU) redox system at 20—40℃. has been investigated. The overall rate of polymerization (R_p) is given byR_p=1.92×10~4e~(-6.860/RT) [AN]~(1.2) [PV]~(0.44) [TU]~(1.0)[HNO_3]~(1.0)The kinetic parameters differed from those of V~(5+)-TU system indicated that the generation of the primary radicals is mainly a difffusion-controlled reaction. The effect of macromolecular field arisen from the polymer matrix exerts a great influence on the polymerization process.     

Polymerization of Acrylonitrile Initiated by 1,4-Dimethyl-1,4-bis(p-nitrophenyl)-2-tetrazene

The polymerization of acrylonitrile (AN) initiated by 1,4-dimethyl-1,4-bis(p-nitrophenyl)-2-tetrazene (Ie) was studied in dimethylformamide (DMF) at high temperature. The polymerization proceeds by a radical mechanism. The rate of polymerization is proportional to [Ie]^0.64 and [AN]^1.36. The overall activation energy for the polymerization is 21.5 kcal/mole within the temperature range of 115-130°C. The chain transfer of Ie was also undertaken over the temperature range of 120-135°C. The activation parameters for the decomposition of Ie at 120°C are k_d = 2.78 × 10^?6 sec^?1, ΔH^? = 40.8 kcal/mole, and ΔS^? = 19.5 cal/mole-deg, respectively.     

Vinyl Polymerization. 274. Polymerization of Acrylonitrile Initiated by the System Tetramethyl Tetrazene and Co(II) Chloride

Abstract

The binary system of tetramethyl tetrazene (TMT) and Co(II) chloride was used as initiator of acrylonitrile (AN) in dimethylformamide. The initial rate of polymerization (Rp) was found to be expressed by Rp = k[TMT]^0.62[Co(II) chloride]^0.57 [AN]^2.00

The polymerization was confirmed to proceed via a radical mechanism. The over-all activation energy for the polymerization was estimated as 15.1 kcal/mole. On the basis of these results and the product analysis of the reaction between the catalyst components in the absence of monomer, the initiation mechanism of the polymerization is discussed.     

Polymerization of Acrylonitrile Initiated by the System Tetramethyl-2-tetrazene and p-Toluenesulfonic Acid

The polymerization of acrylonitrile (AN) initiated by tetramethyl-2-tetrazene (TMT) and p-toluenesulfonic acid (TSA) in dimethylformamide (DMF) was studied. The polymerization was confirmed to proceed through a radical mechanism. The initial rate of polymerization R was expressed by the equation: R_p = k[TMT]^0.6 [TSA]^0.46 [AN]^1.35. The overall activation energy for the polymerization was estimated as 20.7 kcal/mole. In the absence of monomer, the reaction of TMT with TSA was also studied kinetically by measuring the evolution of nitrogen. From these results and ESR measurement of the TMT/TSA system, a possible initiation mechanism is proposed.     

Vinyl polymerization. 416. Polymerization of vinyl monomer initiated by polyethyleneglycol

The polymerization of vinyl monomer initiated by polyethyleneglycol (PEG) in aqueous solution was carried out at 85°C with shaking. Acrylonitrile (AN), methyl methacrylate (MMA), and methacrylic acid were polymerized by PEG–300 (M?_n = 300), whereas styrene was not. The effects of the amounts of monomer and PEG, the molecular weight of PEG, and the hydrophobic group at the end of PEG molecule on the polymerization were studied. The selectivity of vinyl monomer and the effect of the hydrophobic group are discussed according to “the concept of hard and soft hydrophobic areas and monomers.” The kinetics of the polymerization was investigated. The overall activation energy in the polymerization of AN was estimated as 37.9 kJ mol^?1. The polymerization was effected by a radical mechanism.     

Vinyl Polymerization Initiated by Ceric Ion–Ethyl Cellosolve Redox System in Aqueous Nitric Acid

Abstract

Polymerizations of methyl methacrylate (MMA) and acrylonitrile (AN) were carried out in aqueous nitric acid at 30°C with the redox initiator system ammonium ceric nitrate-ethyl cellosolve (EC). A short induction period was observed as well as the attainment of a limiting conversion for polymerization reactions. The consumption of ceric ion was first order with respect to Ce(IV) concentration in the concentration range (0.2–0.4) × 10^?2 M, and the points at higher and lower concentrations show deviations from a linear fit. The plots of the inverse of pseudo-first-order rate constant for ceric ion consumption, (k ¹)^?1 vs [EC]^?1, gave straight lines for both the monomer systems with nonzero intercepts supporting complex formation between Ce(IV) and EC. The rate of polymerization increases regularly with [Ce(IV)] up to 0.003 M, yielding an order of 0.41, then falls to 0.0055 M and again shows a rise at 0.00645 M for MMA polymerization. For AN polymerization, R _p shows a steep rise with [Ce(IV)] up to 0.001 M, and beyond this concentration R _p shows a regular increase with [Ce(IV)], yielding an order of 0.48. In the presence of constant [NO^? ₃], MMA and AN polymerizations yield orders of 0.36 and 0.58 for [Ce(IV)] variation, respectively. The rates of polymerization increased with an increase in EC and monomer concentrations: only at a higher concentration of EC (0.5 M) was a steep fall in R _p observed for both monomer systems. The orders with respect to EC and monomer for MMA polymerization were 0.19 and 1.6, respectively. The orders with respect to EC and monomer for AN polymerization were 0.2 and 1.5, respectively. A kinetic scheme involving oxidation of EC by Ce(IV) via complex formation, whose decomposition gives rise to a primary radical, initiation, propagation, and termination of the polymeric radicals by biomolecular interaction is proposed. An oxidative termination of primary radicals by Ce(IV) is also included.     

Tetraphenylethane iniferters. II. Toluene diisocyanate-based polyurethane iniferter for “living” radical polymerization of acrylonitrile

A novel polyurethane iniferter, synthesized from equal moles of toluene diisocyanate and 1,1,2,2-tetraphenyl-1,2-ethanediol, was used to polymerize acrylonitrile to assess whether it proceeded via a “living” radical polymerization mechanism. From the kinetic results, the rate of polymerization could be expressed as R_pα[BPT]^0.96[AN]^1.64. The increase of number-average molecular weight with increase of both conversion and polymerization time, the bimodal molecular weight distribution in gel permeation chromatography and the increase of molecular weight in the post-polymerization of polyacrylonitrile confirm that the present tetraphenylethane-based polyurethane iniferter follows a “living” radical polymerization mechanism. © 1996 John Wiley & Sons, Inc.     

Electroinitiated polymerization of acrylamide in nonaqueous media

Anodic electroinitiated polymerization of acrylamide has been studied in DMF and DMSO in the presence of Co(NO₃)₂ or Co(ClO₄)₂ in the temperature range 25–40°C. The kinetics and mechanism of the process has been investigated as a function of variables and a suitable mechanism proposed. From the experimental observations, the rate of polymerization is seen to be proportional to [AM]^1.5, [I]^0.5, and [Co²⁺]¹. Current densities exceeding 15 mA/cm² have no effect on the rates. The average degrees of polymerisation (P?_n) increase with increasing [AM] and decreasing [Co²⁺] and applied current, I. It has been shown that a monomer-metal ion complex is oxidized at the anode, generating radical species. The polymerization and termination are confined to the anode compartment. The process is very efficient compared to the NO mediated reaction.     

"CAGE" VANADYL POLYCARBOXYLATE-THIOUREA COMPLEX FOR THE POLYMERIZATION OF ACRYLONITRILE

The polymerization of acrylonitrile (AN) in aqueous nitric acid initiated by " cage " vanadyl polycarboxylate (P=VO)-thiourea (TU) complex was investigated. The overall rate ofpolymerization isThe relationship between the induction period (τ) and the temperature of polymerization as well as the concentrations of reactants can be expressed as follows :The molecular weight of polyacrylonitrile increases with increasing monomer concentration and decreases with increasing temperature of polymerization and concentrations of vanadyl polycarboxylate and thioureaThe polymerization mechanism was proposed and discussed.     

Copper(0)‐mediated living radical polymerization of acrylonitrile at room temperature

The copper(0)‐catalyzed living radical polymerization of acrylonitrile (AN) was investigated using ethyl 2‐bromoisobutyrate as an initiator and 2,2′‐bipyridine as a ligand. The polymerization proceeded smoothly in dimethyl sulphoxide with higher than 90% conversion in 13 h at 25 °C. The polymerization kept the features of controlled radical polymerization. ¹H NMR spectra proved that the resultant polymer was end‐capped by ethyl 2‐bromoisobutyrate species. Such polymerization technique was also successfully introduced to conduct the copolymerization of styrene (St) and AN to obtain well‐controlled copolymers of St and AN at 25 °C, in which the monomer conversion of St could reach to higher than 90%. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Study of complexation process between N-phenylaza-15-crown-5 with yttrium cation in binary mixed solvents

The complexation reaction between Y³⁺ cation with N-phenylaza-15-crown-5(Ph-N15C5) was studied at different temperatures in acetonitrile–methanol (AN/MeOH), acetonitrile–propanol (AN/PrOH), acetonitrile–1,2 dichloroethane (AN/DCE) and acetonitrile–water (AN/H₂O) binary mixtures using the conductometric method. The results show that in all cases, the stoichiometry of the complex is 1:1 (ML). The values of formation constant of the complex which were determined using conductometric data, show that the stability of (Ph-N15C5.Y)³⁺ complex in pure solvents at 25?°C changes in the following order: PrOH?>?AN?>?MeOH and in the case of binary mixed solutions at 25?°C it follows the order: AN–DCE?>?AN–PrOH?>?AN–MeOH?>?AN–H₂O. The values of standard thermodynamic quantities (?H _c ^° and ?S _c ^° ) for formation of (Ph-N15C5.Y)³⁺ complex were obtained from temperature dependence of the formation constant using the van’t Hoff plots. The results show that in most cases, the complex is entropy and enthalpy stabilized and these parameters are influenced by the nature and composition of the mixed solvents. In most cases, a non-linear behavior was observed for variation of log K_f of the complex versus the composition of the binary mixed solvents. In all cases, an enthalpy–entropy compensation effect was observed for formation of (Ph-N15C5.Y)³⁺ complex in the binary mixed solvents.     

Study of complex formation between La+3, Ce+3 and Y3+ cations with some 18-membered crown ethers in methanol–water and methanol–acetonitrile binary mixtures

The complexation reactions between some rare earth metal cations (Ln; Y³⁺, La³⁺ and Ce³⁺) with 18-crown-6 (18C6), dicyclohexyl-18-crown-6 (DC18C6), benzo-18-crown-6 (B18C6) and decyl-18-crown-6 (Dec18C6), have been studied in methanol–acetonitrile (MeOH–AN) and methanol–water (MeOH–H₂O) binary mixtures using a competitive spectrophotometric method. 2-(2-thiazolylazo)-4-methyl phenol (TAC or L) was used as colorimetric complexant. It was found that the selectivity order of TAC for Ln cations is highly changed with changing the composition of the mixed solvents. Moreover, as the concentration of acetonitrile increases in MeOH–AN binary mixture, the stability of Ln–TAC complexes increases and passes through a maximum at a certain mole fraction of acetonitrile. In addition, the stability of Ln–crown ether complexes increases with increasing the concentration of methanol in MeOH–H₂O and acetonitrile in MeOH–AN binary solutions. A non linear behaviour was observed for variation of stability constants of all complexes versus the composition of the mixed solvents. The results show that 18C6 generally forms more stable complexes with La³⁺ and Ce³⁺ cations than DC18C6 in methanol and MeOH–H₂O binary mixtures, while this sequence is reversed in the methanol-acetonitrile binary mixtures which are rich with respect to acetonitrile.     

亚硝酸钠引发丙烯腈聚合的研究

研究了亚硝酸钠引发硝酸溶液中丙烯腈的聚合反应。测得表现聚合速度 Rp=Ae~(-10,800/RT)[AN]~2.2[NaNO_2]~(0.17-1.0)[HNO_3]~(1.0-0.67 丙烯腈-丙烯酸甲酯共聚合反应中竞聚率分别是γ_An=0.96,γ_MA=1.17,表明聚合反应是按自由基机理进行。 根据聚合动力学和红外光谱分析,认为以亚硝酸钠引发硝酸溶液中丙烯腈的聚合反应与电解或金属溶蚀过程中的次级引发相同。     

1-(Bromoacetyl)pyrene,a novel photoinitiator for the copolymerization of styrene and acrylonitrile

A comparative study on photoinitiated solution copolymerization of Styrene (Sty), with acrylonitrile (AN) using pyrene, 1-acetylpyrene, and 1-(bromoacetyl)pyrene (BrPy) as initiators, showed that the introduction of a chromophoric moiety, bromoacetyl (–COCH₂Br), significantly increased the photoinitiating ability of pyrene. The kinetics and mechanism of copolymerization of Sty with AN (Sty–co–AN) using BrPy as photoinitiator has been studied in detail. The kinetic data, inhibiting effect of benzoquinone, and electron spin resonance (ESR) studies suggest that the polymerization proceeds via a free radical mechanism. The system followed non-ideal kinetics (R _p α[BrPy]^0.7[Sty]^1.09[AN]^1.01) and degradative solvent transfer reasonably explained these kinetic non-idealities. The co-monomer reactivity ratios calculated by using the Finemann–Ross and Kelen–Tudos models were r ₁ (Sty) = 0.39 and r ₂ (AN) = 0.05. The reactivity ratios strongly indicate that the two monomers enter in almost alternating arrangement along the copolymer chain.