On the Structure of Syndiotactic Poly(propylenes)

Propylene was polymerized with the catalyst system (C₂H₅)2A1C1/ VCk/ anisole at -78°C using various conditions. The resulting polymers were successively extracted by diethyl ether, hexane, and heptane, leaving the residue. The polymers of the four series were characterized by intrinsic viscosity, gel permeation chromatography, ¹³C nuclear magnetic resonance, infrared spectroscopy, x-ray diffraction, and by differential scanning calorimetry. The combined evidence from the various methods indicates that this catalyst system leads to stereoblock polymers which can be fractionated according to stereochemical composition and sequence length.     

Interpretation of spin relaxation in polyisobutylene in terms of specific motions

Porton and carbon spin-lattice relaxation times T₁ and nuclear Overhauser enhancements are interpreted in terms of motions likely in linear polyisobutylene. Most of the interpretation is based on relaxation data in the literature, but some additional ¹H and ¹³C pulse Fourier transform experiments were conducted to resolve a disagreement in the literature concerning cross relaxation between the two types of protons present in polyisobutylene. Spin relaxation in solution and the bulk is accounted for by three specific motions considered as independent sources of motional modulation of the dipole–dipole interaction. The first motion is overall isotropic rotatory diffusion which has a known dependence on molecular weight, intrinsic viscosity, and solvent viscosity for polymers in solution, and a known dependence on molecular weight and viscosity for bulk polymers. The effects of overall tumbling account for a decrease of T₁ for the methylene and methyl carbons with increasing molecular weight in solution and increase of T₁ of methylene carbons with molecular weight in bulk. The second motion considered is backbone rearrangements caused by the three-bond jump. This motion dominates relaxation of the methylene carbons either in solution or in the bulk allowing for the determination of the associated correlation time. The correlation time characterizing the occurrence of the three-bond jump in a 5% (wt/vol) solution in CCI₄ at 45°C is 58 psec, and in the bulk at 45°C it is 11 nsec. The last motion included in the model is methyl-group rotation about the threefold symmetry axis. The methyl-group rotational correlation time is 0.20 nsec in a 5% (wt/vol) solution in CCI₄ at 45°C and 0.33 nsec in the bulk at 45°C. The concentration dependence of the backbone motion contrasts strongly with the corresponding dependence of methyl-group rotation.     

Synthesis,isolation, characterization,and properties of small-size aromatic macrocycles for poly(arylene ether ketone)s

A series of macrocyclic arylene ether ketone oligomers from 4,4′-difluorobenzophenone, 2,4′-difluorobenzophenone and 1,3-bis(4′-fluorobenzoyl)benzene were prepared via aromatic nucleophilic substitution according to the pseudo-high dilution principle. Small-size aromatic macrocycles were isolated by silica gel column chromatography with cyclohexane/ethyl acetate as eluent. The chemical structures of these small-size macrocycles were characterized by matrix-assisted laser desorption ionization–time-of-flight–mass spectrometry (MALDI–TOF–MS), IR, ¹⁹F-,¹H-, and ¹³C-NMR, and GPC techniques. Molecular chain length and steric hindrance of monomers affected the product compositions. The NMR results show that there are different chemical shifts in the different ring-size macrocyclic poly arylene ether ketones in spite of having the same repeating unit. The crystallizability and thermal properties of small-size arylene ether ketone macrocycles were also investigated by DSC, WAXD, TGA, and the results suggest that the crystallization and thermal properties are related to their intrinsic chemical structures. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1957–1967, 1999     

Atom transfer radical copolymerizationof acrylonitrile/n‐butyl acrylate: Microstructure determination by two‐dimensional nuclearmagnetic resonance spectroscopy

Atom transfer radical polymerization conditions were optimized and standardized with different initiator and catalyst systems. Acrylonitrile/n‐butyl acrylate copolymers were synthesized with 2‐bromopropionitrile as the initiator and CuCl/Cu(0)/2,2′‐bipyridine as the catalyst system. Variations of the feed composition led to copolymers with different compositions. The number‐average molecular weight and the polydispersity index were determined by gel permeation chromatography. Quantitative ¹³C{¹H} NMR was employed to determine the copolymer composition. The reactivity ratios calculated with a methodology based on the Mao–Huglin terminal model were r_A = 1.30 and r_B = 0.68 for acrylonitrile and n‐butyl acrylate, respectively. The reactivity ratios determined by the modified Kelen–Tudos method were r_A = 1.29 ± 0.01 and r_B = 0.67 ± 0.01. ¹³C{¹H} NMR and distortionless enhancement by polarization transfer (DEPT‐45, 90, and 135) were used to distinguish methyl, methylene, methine, and quaternary carbon resonance signals. The overlapping and broad signals of the copolymers were assigned completely to various compositional and configurational sequences by the correlation of one‐dimensional (¹H, ¹³C{¹H}, and DEPT) and two‐dimensional (heteronuclear single quantum coherence, total correlation spectroscopy, and heteronuclear multibond correlation) NMR spectral data. The complete spectral assignments of carbonyl and nitrile carbons were performed with the help of heteronuclear multibond correlation spectra. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2810–2825, 2005     

The solid state 13C-NMR and 19F-NMR spectra of some graphite fluorides

The solid state ¹³C nuclear magnetic resonance spectra of fluorinated graphites show two resonances, one of which is assigned to aromatic carbon and the other to aliphatic carbon. The resonances are very broad with the high-field resonance centered at about 35 ppm below tetramethylsilane (TMS) and a low-field resonance centered at about 160 ppm below tetramethylsilane. The high-field resonance is typical of an sp³-like carbon and the low-field resonance is assigned to sp²-like carbons. It is found that the aromatic resonance in graphite decreases with an increase in fluorination of the graphite fluorides examined in this study. The ¹⁹F nuclear magnetic resonance spectra of C₄F and CF₁ each show one resonance. The fluorine resonance in C₄F is 180 ppm above CFCI₃ whereas the fluorine resonance in CF₁ is 55 ppm above CFCI₃. These peaks are in the range for fluorine bonded to aromatic and aliphatic carbons, respectively.     

Melamine–formaldehyde resins: Constitutional characterization by fourier transform 13C-NMR spectroscopy

The random chemical structures of melamine–formaldehyde resins, including methylated melamine–formaldehyde resins and urea–melamine formaldehyde resins, were investigated by ¹³C-NMR spectroscopy (Fourier transform). All the combined formaldehydes, methylol and methyl ether groups, methylene structures, and dimethylene ether structures were assigned. A ¹³C chemical shift of methylene carbon occurred by substitution of other constituents of the methylene group for a proton of the adjacent monosubstituted nitrogen atom, as shown in a ¹³C-NMR spectrum of urea–formaldehyde resins. It was found that the chemical shift of each corresponding carbon of both melamine resins and urea–melamine resins was almost superimposed with that of urea resins.     

New approaches for the synthesis of hindered C60‐containing polyphosphazenes via functionalized intermediates

Two new approaches were developed to synthesize C₆₀‐containing polyphosphazenes. Accordingly, two new reactive macromolecular intermediates ( P4 and P8 ) were obtained from poly(dichlorophosphazene) by the direct nucleophilic substitution reaction. In one approach, a predesigned amimo end–functionalized polyphosphazene ( P4 ) was prepared and then reacted with C₆₀ molecules in chlorobenzene to yield C₆₀‐containing polyphosphazene; in the other approach, a polyphosphazene containing 4‐methyl phenoxy groups as side chains was first prepared, and then part of the 4‐methyl groups were converted to azidomethyl groups (in P8 ), which reacted with C₆₀ to yield C₆₀‐containing polyphosphazene. The polymers were characterized by ¹H NMR, ¹³C NMR, IR, and UV–visible spectra and by gel permeation chromatography. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2877–2885, 2004     

Quasiliving Carbocationic Polymerization. XII. Forced Ideal Copolymerization of lsobutylene with Styrene

Forced ideal carbocationic copolymerization of isobutylene/styrene systems has been achieved by continuous addition of mixed monomer feeds to 2-chloro-2,4,4-trimethylpentane/TiCl₄ in n-hexane/methylene chloride charge by keeping the input rate equal to the overall rate of copolymerization. The composition of the copolymers was identical to that of the feeds over the entire monomer concentration range. The number-average molecular weight of the copolymers increased almost linearly with the amount of consumed monomers at higher isobutylene concentrations in the feed. The molecular weight increase was less pronounced at higher styrene concentration because more methylene chloride had to be used in the solvent system to keep the copolymer in solution. The micro-structure of the copolymers is uniform as determined by gel permeation chromatography (UV plus RI) and ¹³C-NMR spectroscopy According to these studies, true copolymers have formed. The probability of triads in the copolymer has been determined.     

1H- and 13C-NMR. Studies of some metal complexes of o,o′-dihydroxyazobenzenes

The aromatic ¹H- and ¹³C-NMR. spectra of some metal complexes of o, o′-dihydroxyazobenzenes are shown to be useful in distinguishing the two possible isomers (acolar and discolar) stemming from the non equivalence of the two ligating azo nitrogen atoms. The ortho aromatic carbon atoms, C(6) and C(12) experience relatively large upfield shifts between 12.8 and 15.7 ppm when the adjacent nitrogen atom is coordinated. The protons attached to these carbon atoms are shifted downfield. The values ⁿJ (¹⁵N, ¹³C) for the ligand 2,2′-dihydroxy-3-methyl-4′-chloro-5-(t-butyl)-¹⁵N-azobenzene are reported.     

Peak area measurements of cross-polarization magic-angle-spinning 13C-NMR spectra of crosslinked polystyrenes

Cross-polarization magic-angle-spinning ¹³C-NMR spectra of polystyrenes crosslinked with 1–20% of methine vinyl carbon ¹³C-labeled p-divinylbenzene and of Friedel–Crafts crosslinked poly(chloromethylstyrene)s have been obtained with both glossy solid and CDCl₃-swollen gel samples. The spectra of natural abundance, uncrosslinked, glassy polystyrene, and the spectra of the solid labeled networks give aliphatic and aromatic peak areas only 0.7 times as large per ¹³C atom as that of poly(oxymethylene). Similarly the crosslinked poly(chloromethylstyrene) gave peak areas about 0.6 times that of internal poly(oxymethylene). The labeled gels give peak areas 0.2–0.6 times as large per ¹³C atom as glassy polystyrene, and the peak areas in spectra of gels increase with the divinylbenzene content     

Effect of collision interactions on 13C nuclear magnetic shielding in monosubstituted benzenes in halogen-containing solvents

The ¹³C nuclear magnetic shielding in benzene and ten monosubstituted benzenes was studied when these compounds were dissolved in cyclohexane, carbon tetrachloride, tetrachloroethylene, methylene bromide and methylene iodide. The results revealed that the observed changes of ¹³C magnetic shielding are dependent on both the solute and solvent molecular properties, although the dependence on the solvent is much more significant. It was also shown that the solvent effects for aromatic carbons are independent of the π electron density distribution in an aromatic ring. The observed ¹³C deshielding was attributed mainly to overlap effects which take place during molecular collisions.     

Synthesis of long‐chain‐branched polyethylene by ethylene homopolymerization with a novel nickel(II) α‐diimine catalyst

Long‐chain‐branched polyethylene with a broad or bimodal molecular weight distribution was synthesized by ethylene homopolymerization via a novel nickel(II) α‐diimine complex of 2,3‐bis(2‐phenylphenyl)butane diimine nickel dibromide ({[2‐C₆H₄(C₆H₅)]? N?C? (CH₃)C(CH₃)?N? [2‐C₆H₄(C₆H₅)]}NiBr₂) that possessed two stereoisomers in the presence of modified methylaluminoxane. The influences of the polymerization conditions, including the temperature and Al/Ni molar ratio, on the catalytic activity, molecular weight and molecular weight distribution, degree of branching, and branch length of polyethylene, were investigated. The resultant products were confirmed by gel permeation chromatography, gas chromatography/mass spectrometry, and ¹³C NMR characterization to be composed of higher molecular weight polyethylene with only isolated long‐branched chains (longer than six carbons) or with methyl pendant groups and oligomers of linear α‐olefins. The long‐chain‐branched polyethylene was formed mainly through the copolymerization of ethylene growing chains and macromonomers of α‐olefins. The presence of methyl pendant groups in the polyethylene main chain implied a 2,1‐insertion of the macromonomers into [Ni]? H active species. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1325–1330, 2005     

Synthesis, cure kinetics, and thermal properties of a novel boron–silicon hybrid polymer

A novel boron–silicon hybrid polymer (PASB) was synthesized from polycondensation between phenylboron dichloride and dichloromethylsilane with Grignard reagent. The structure of PASB was characterized using fourier transform infrared spectra, ¹H-NMR, ¹³C-NMR, and gel permeation chromatography. The curing behavior of PASB was investigated by means of non-isothermal differential scanning calorimetry and the kinetic parameters were determined by the Kissinger’s and Ozawa’s methods, respectively. The results showed that both the methods for calculating the activation energy value gave fairly close results of 104.4 and 107.7 kJ mol^?1, respectively. A reasonable curing cycle for the resin system was also established, which suggested that it was reasonable to choose a curing temperature between T _i0 (452.0 K) and T _f0 (554.0 K). These results can provide theoretical guidance reference for determining the curing of the resin system. The thermal stability of cured PASB resin was studied by means of thermogravimetric analysis under nitrogen atmosphere and the temperature of 5 % mass loss (Td₅) was 610.1 °C, the residue at 1,000 °C was 87.8 %, which showed that the cured PASB resin exhibited excellent thermal properties and made it potentially useful as high performance matrix resin and precursor for ceramics.     

A 13C-NMR investigation of plasma polymerized ethane,ethylene, and acetylene

Solid-state ¹³C-NMR spectra were obtained by cross-polarization and magic angle spinning of polymers prepared by injecting ethane, ethylene, and acetylene into a radiofrequency plasma. By use of the delayed decoupling technique to suppress protonated carbon peaks and difference spectroscopy five resolved spectral bands can be distinguished. These bands are assigned to (I) unsaturated nonprotonated, (II) unsaturated CH and CH₂, (III) quaternary, (IV) methine and methylene, and (V) methyl carbons by comparison with standard ¹³C shifts compiled for organic materials. The relative amounts of these structural features in the polymers were determined quantitatively and the possible sources of errors considered.     

Copolymers of 7-Methoxy-2-Acetyl Benzofuryl Methylmethacrylate With Styrene: Synthesis,Characterization, Reactivity Ratios and Determination of Kinetic Parameters With Thermogravimetric Analysis

The 7-methoxy-2-acetyl benzofuryl methylmethacrylate (MABMM) monomer was synthesized by reacting 7-methoxy-2-bromo acetyl benzofurane with sodium methacrylate in acetonitrile solvent at 70°C in the presence of triethylbenzylammoniumchloride (TEBAC). The monomer was characterized by FTIR, ¹H-and ¹³C-NMR spectral studies. Reactivity ratios for the copolymers 7-methoxy-2-acetyl benzofuryl methylmethacrylate (MABMM)-co- styrene (ST) are reported. Copolymers were prepared by free radical polymerization using 2,2′-azobisisobutyronitrile (AIBN) as an initiator at 70°C in 1,4-dioxane solution. FTIR, ¹H-and ¹³C-NMR spectral studies and gel permeation chromatography (GPC) were used the copolymer characterization. The monomer compositions in the copolymer were determined by elementel analyses and the reactivity ratios (ri) were calculated applying diverse linear methods, namely Finemann-Ross (FR) and Kelen-Tüdös (KT) and the nonlinear error invariable model method of a computer program RREVM. By using the latter pr°Cedure, the values of the reactivity ratios were estimated as 2.74 and 0.69 for the system MABMM (1) and ST (2), respectively. These values suggest the formation of nearly-alternating copolymers in the systems. Molecular weights were determined by gel permeation chromatography (GPC). The polydispersity indices of the polymers determined using suggest a strong tendency for chain termination by disproportionation. The glass transition temperature of the polymers were investigated by Shimadzu DSC-60 and the apparent thermal decomposition activation energies (E_d) were calculated by the Ozawa method using the Perkin-Elmer TGA thermobalance, respectively. Tg increases when the concentration of polar monomer (MABMM) in the copolymer increases. It was observed that thermal stabilities of copolymers increased with increasing of MABMM content in copolymers.     

Synthesis of C60‐containing polyphosphazenes from a new reactive macromolecular intermediate: Polyphophazene azides

A novel synthetic strategy was developed to prepare polyphosphazenes containing C₆₀ moieties as side chains. Thus, a new reactive macromolecular intermediate, polyphosphazene azides ( P1 ), was obtained from poly(dichlorophosphazene) by the direct nucleophilic substitution reaction. Then the azide group in P1 reacted with C₆₀ molecules to afford the first example of C₆₀‐containing polyphosphazenes ( P2 and P3 ). The polymers are soluble in common organic solvents. Molecular structural characterization for the polymers was presented by ¹H NMR, ¹³C NMR, IR, ultraviolet–visible spectra, and gel permeation chromatography. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 194–199, 2004     

Carbon-13 nuclear magnetic resonance studies of leonurine hydrochloride and its analogues

The ¹³C NMR spectra of leonurine hydrochloride and thirteen of its analogues in DMSO-d₆ have been analyzed. Changes in the aromatic substituents have no significant effect on the chemical shifts of the side chain methylene carbons indicating that they do not influence the conformation of the latter. Observed deviations from additivity of substituent effects for the methylene carbon chemical shifts suggest that the methylene side chains of these compounds may be more tightly coiled than are the corresponding n-alkanes. In representative cases no change in conformation is evident in 50% aqueous DMSO-d₆ solutions, indicating that similar considerations may apply in aqueous media.     

13C-NMR Study of Anomalous Linkages in Polyurethane

Several kinds of model compounds for anomalous linkages in polyurethanes (branching or crosslinking; allophanate and biuret) were prepared. The phenylisocyanate (PHI) based models were identified by IR and NMR. The ¹³C-NMR chemical shifts effects due to the anomalous linkages were determined. The 4,4′-diphenylmethane diisocyanate (MDI) based models were purified incompletely but the characteristic signals of the aromatic carbons were nevertheless found in their spectra. Two types of segmented polyurethane (SPU) were prepared and the anomalous linkages were investigated by ¹³C-NMR. The signals due to the allophanate (Al) and the triphenylbiuret (TB) linkages were observed in the spectra of the SPU prepared at high temperature (>80°C) or prepolymer gels yielded by abnormal reaction. A small signal due to a phenyl carbon of biuret (Bi) linkage was observed even in a normally prepared SPU (polyetherurethane-urea). Employing the phenyl carbon signals was advantageous for the determination of anomalous linkages because of their larger intensities.     

Polymers containing polynuclear aromatics linked by one-carbon bridges

The conversion of naphthalene, anthracene, and phenanthrene to polymeric material via Friedel-Crafts chemistry was investigated. Synthesis of the polymers was accomplished by: (1) self-condensation of the chloromethylated aromatic substrate in the presence of AlCl₃ or SnCl₄ or (2) treatment with chloromethyl ethyl ether (CMEE) and SnCl₄, producing the chloromethylated substrate in situ, followed by self-condensation polymerization. Soluble or insoluble polymers were preferentially produced by varying the stoichiometry, time, or temperature of the reaction. The resulting polymers consisted of the polycyclic aromatic nuclei bridged by methylene groups. The regiochemistry of the polymer linkages was determined through the use of IR, ¹H- and ¹³C-NMR. The polymers showed relatively high thermal and thermo-oxidative stabilities (380–495°C). © 1992 John Wiley & Sons, Inc.     

Electrophoretic mobility of duplex DNA cross‐linked by mechlorethamine at a cytosine–cytosine mismatch pair

The common nitrogen mustard, mechlorethamine, can form a covalent cross‐link between the two bases of a cytosine–cytosine mismatch pair within a DNA duplex. The cross‐linked species can be readily separated from DNA monoadducts and unreacted strands using denaturing polyacrylamide gel electrophoresis. Here, using DNA 19 mer duplexes that are mechlorethamine cross‐linked at a C₄–C₃₅, C₇–C₃₂, C₁₀–C₂₉, or C₁₃–C₂₆ mismatch pair, we show that the denaturing polyacrylamide gel electrophoresis mobility of the cross‐linked species is particularly sensitive to the proximity of the C–C cross‐link to the duplex end. Species that are cross‐linked at a C₄–C₃₅ mismatch have greater mobilities than those cross‐linked at C₇–C₃₂ or C₁₃–C₂₆, and the species with a central C₁₀–C₂₉ cross‐link have the lowest mobility. The mobility is also dependent on the proximity of the cross‐link to a 5′‐³²P‐phosphate or a 5′‐fluorescein label. We interpret these results in terms of the conformational properties of the cross‐linked species in the denaturing gel. The results are consistent with the retention of partial duplex character at the end proximal to the cross‐link, with an influence on the mobility of the GC/AT ratio proximal to the cross‐link and at the duplex end, and a small but discernible effect of the label.