Melting behavior of nylon 6 fiber in textiles

The melting process of constrained nylon 6 fibers has been studied to estimate the true melting point of its original crystals. The melting peak became simpler in shape and shifted to higher temperature with increasing fiber-axis restricting force. When heating rate, β, was increased, the temperature where the melting curve initially departs from its baseline, Tsm, decreased steeply in the range of 45 to 60°C min^-1, and increased linearly with increasing β above 60°C min^-1. By linear extrapolation of Tsm to 0°C min^-1, the temperature of ca 190°C was obtained for the melting temperature of the original nylon 6 crystals. This seems to correspond to the zero-entropy-production melting of the most imperfect crystallites of the nylon 6 fabric. This revised version was published online in July 2006 with corrections to the Cover Date.     

Effect of molecular orientation distribution and crystallinity on the measurement of the crystal lattice modulus of nylon 6 by x-ray diffraction

The crystal lattice modulus of nylon 6 (-type) was measured by x-ray diffraction using nylon 6 films drawn up to five times. The measured crystal lattice modulus was 173–175 GPa for all specimens whose crystallinity and the Young's modulus were beyond 46% and 3.75 GPa, respectively. These results indicate that a state of homogenous stress can be achieved. In contrast, the values were scattered for the speciments whose crystallinity and Young's modulus are less than the above values. To study the origin, a numerical calculation of the crystal lattice modulus, as measured by x-ray diffraction, was carried out by considering effects on the orientation factors of molecular chains and crystallinity. In this calculation, a previously introduced model was employed, in which oriented crystalline layers are surrounded by oriented amorphous phases so that the strains of the two phases at the boundary are identical. The theoretical results calculated by the introduced model indicated that the crystal lattice modulus by x-ray diffraction is almost equal to the intrinsic crystal modulus if the morphology of the test specimen can be represented as a series model. In contrast, if a parallel model is more appropriate, the difference between the measured modulus and the intrinsic value can be pronounced. Such morphological dependence was found to be less pronounced with increasing high degree of molecular orientation and crystallinity.     

Conductivity and the electric modulus in polymers

At relatively high temperatures and low frequencies the electrical properties of many polymers are dominated by ionic conductivity. In cases where the glass transition is obscured by conductivity, it can be revealed by treating the data in terms of the electric modulus. The magnitude of the activation energy for conductivity (24–67 kcal/mol) for Nylons 6, 66, and 6I, polybutylene terephthalate, and polycarbonate indicates that the transport of charged particles requires the motion of polymer segments.     

城乡建设用地增减挂钩政策的逻辑与谬误

为了节约集约用地、保护耕地而出台的增减挂钩政策在现实中因各种不符合实际的制度设计,造成了当前土地认识和土地实践的混乱。从实践上看,增减挂钩政策通过“拆旧”形成的建设用地指标并不会产生财富,仅仅是一种财富转移,造成了资源浪费;从理论上看,增减挂钩政策被作为一项基础政策来设计土地制度改革,假定了当前中国拥有巨量的土地财富,存在认识误区。增减挂钩政策属于虚拟市场性质,这应是理解增减挂钩制度的基本认识前提。应当用公共政策取代增减挂钩政策转移资源的功能。     

Moduli of model elastomeric networks prepared from polymer chains having a high plateau modulus,and their interpretation in terms of the constrained-chain model

High-molecular weight polybutadiene chains having approximately 47% cis-1,4 units and 45% trans-1,4 units were crosslinked through their carbon-carbon double bonds using p-bis(dimethylsilyl) benzene as crosslinking agent and chloroplatinic acid as catalyst. This particular polymer was chosen because the high plateau modulus it exhibits in the un-crosslinked state is taken to indicate large numbers of chain entanglements, and stress–strain measurements on such networks have frequently been interpreted with the assumption that the trapping of such entanglements during crosslinking should contribute significantly to their modull. It is shown in the present investigation that such results are equally well interpreted in terms of the new constrained-chain theory of rubbery elasticity. © 1993 John Wiley & Sons, Inc.     

Stress distribution in poly‐p‐phenylenebenzobisoxazole (PBO) fiber as viewed from vibrational spectroscopic measurement under tension. I. Stress‐induced frequency shifts of Raman bands and molecular deformation mechanism

To clarify the relationship between a molecular deformation mechanism and a high Young's modulus of poly‐p‐phenylenebenzobisoxazole (PBO), Raman spectra were measured for fibers subjected to a tensile stress along the chain axis. The stress‐induced frequency shift of the observed Raman bands could be reproduced reasonably by the normal‐mode calculation under a quasi‐harmonic approximation. The frequency position at zero stress and the shift factor of Raman bands were predicted for a PBO chain that agreed with the actually evaluated values. On the basis of these analyses, the molecular deformation mechanism of the PBO chain has been discussed in detail. The crystalline modulus of the PBO chain was calculated theoretically to be 458 GPa, in good agreement with the X‐ray observed value of 460 GPa. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1269–1280, 2002     

Microstructural investigation of high‐speed melt‐spun nylon 6 fibers produced with variable spinning speeds

The structural details of high‐speed melt‐spun nylon 6 fibers at spinning speeds ranging from 4500 to 6100 m/min were investigated by solid‐state proton nuclear magnetic resonance (¹H NMR) spectroscopy, density and birefringence measurements, differential scanning calorimetry (DSC), and X‐ray diffraction (XRD). The analyses of the proton spin‐lattice relaxation times in the rotating frame and correlation times confirmed the existence of three different phases, the immobile crystalline, intermediate rigid amorphous, and mobile amorphous regions, in the fiber sample. At spinning speeds lower than 5200 m/min, the portion of the crystalline phase increased at the expense of the rigid amorphous region and then reached a plateau afterward, from which the mobile amorphous portion increased. Combined analyses of density and birefringence measurements, DSC, and XRD in conjunction with NMR results indicated that the formation of the γ crystal became predominant compared to that of the α crystal. The orientation factor of the crystalline phase increased slightly with increasing spinning speed, whereas the amorphous orientation factor decreased because of the increase of the purely amorphous region. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1285–1293, 2000     

Unimodal and bimodal networks of poly(dimethyl-siloxane) in pure shear

Model networks of poly(dimethylsiloxane) (PDMS) were prepared by tetrafunctionally endlinking hydroxyl-terminated chains of various molecular weights. Some networks were prepared from mixtures of chains so as to yield a bimodal distribution of network chain lengths and, in some cases, these networks were prepared in solution. The stress–strain behavior of these unimodal and bimodal networks was studied in pure shear, which was imposed by stretching a sheet of the network having a large ratio of width to length in the direction perpendicular to the width. The pure-shear moduli of both types of networks generally were found to depend markedly on strain. Stress–strain isotherms for unimodal networks prepared from chains of one or the other of two molecular weights were well interpreted using the constrained-junction model of Flory and Erman. The bimodal networks showed large increases in the pure-shear modulus at high strains which were similar to those reported for uniaxial extension and compression. Endlinking in solution decreases the modulus in general and its upturn in particular, presumably because of diminished chain-junction entangling.     

Simple measuring techniques for the determination of bubble- and bulk-phase velocities in bioreactors

Ultrasound Doppler pulse velocimetry for the measurement of bubble velocities and local temperature pulse time-of-flow techniques for determining the flow velocities of the liquid phase are two complementary new measuring techniques to gain information on the fluid dynamic behavior of bioreactors. Both methods show considerable advantages over conventional techniques. They proved to provide reliable results during biotechnological cultivations. Results from runs in airlift loop bioreactors are reported.     

Bulk and microscopic properties of copolymer networks in mixed aqueous solvents

Amphiphilic films and hydrogels have been prepared from ethanol/water solutions containing a hydrocarbon-grafted water-soluble cellulose ether. These materials are characterized by dispersed hydrophobic microdomains which form spontaneously in the solvent due to the inherent incompatibility of the side chains with water. At low applied shear stress, the microdomains behave as temporary linkages of finite lifetimes, imparting viscoelastic properties to the networks. The molecular weight between microdomains was found to be independent of the volume fraction of polymer in the gel, and the number of linkages per backbone ranges from 22.8 ± 1.3 to 26.2 ± 1.5 over the frequency range 30–50 rad/s. The behavior of the solutions and gels was characterized using fluorescence and dynamic rheological measurements. It was demonstrated that the microdomains are capable of sequestering water-insoluble solutes. © 1992 John Wiley & Sons, Inc.     

Evidence of steric factors in the fungitoxic mechanisms of 8-quinolinol and its 2-, 3-, 4-, 5-, 6-and 7-chloro and bromo analogues

Summary A study was made of the fungitoxicity of 2-, 3-, 4-, 5-, 6- and 7-chloro and bromo-8-quinolinols againstAspergillus niger,A. oryzae,Myrothecium verrucaria,Trichoderma viride andTrichophyton mentagrophytes in Sabouraud dextrose broth and in Yeast Nitrogen Base supplemented with 1%D-glucose and 0.088%L-asparagine. Based on the presence or absence of synergism between pairs of substituted 8-quinolinols and reversal or nonreversal of toxicity byL-cysteine or N-acetyl-L-cysteine, the following conclusions were reached: (1) substituents on the quinoline ring change the site(s) of action of the toxicant; (2) the sites of action of the 5-, 6-, and 7-chloro-8-quinolinols are different from each other and from 8-quinolinol and its 2-, 3-, and 4-chloro analogues, and the same is true for the corresponding bromo compounds; (3) 8-quinolinol and its 3- and 4-chloro and bromo analogues appear to share common sites of action; (4) for good antifungal activity the 2 position of the ring must not be substituted by sterically bulky groups; (5) the geometry of the binding sites of action are not so constrained that they cannot accommodate the analogously substituted chloro- and bromo-8-quinolinols.

---

Nachweis sterischer Faktoren bei der Fungitoxizität von 8-Chinolinol und seinen 2-, 3-, 4-, 5-, 6- und 7-Chlor- und -Brom-Analogen

Zusammenfassung Es wurde eine Studie der Fungitoxizität von 2-, 3-, 4-, 5-, 6- und 7-Chlor- und-Brom-8-chinolinol gegenüberAspergillus niger,A. oryzae,Myrothecium verrucaria,Trichoderma viride undTrichphyton mentagrophytes in Sabouraud Dextrose Nährmedium und in Hefe-N-Base mit 1%D-Glucose und 0.088%L-Asparagin unternommen. Auf der Basis des Zutreffens oder der Abwesenheit eines Synergismus zwischen Paaren von substituierten 8-Chinolinolen und der Umkehrung oder Nichtumkehrung der Toxizität durchL-Cystein oder N-Acetyl-L-cystein wurden folgende Schlußfolgerungen abgeleitet: (1) Substituenten am Chinolin-Ring ändern die Aktionsstelle(n) des Toxikans; (2) Die Angriffsstellen der 5-, 6- und 7-Chlor-8-chinolinole sind untereinander und von 8-Chinolinol und seinen 2-, 3- und 4-Chlor-Analogen verschieden, wobei das auch für die entsprechenden Brom-Verbindungen gilt; (3) 8-Chinolinol und seine 3- und 4-Chlor- und -Brom-Analogen scheinen gemeinsame Aktionsstellen zu teilen; (4) für eine gute antifungale Aktivität darf die 2-Position des Rings nicht mit sterisch anspruchsvollen Gruppen besetzt sein; (5) Die Geometrie des Bindungsstellen der Wirkung ist nicht so gespannt, daß nicht sowohl analoge Chlor- oder Brom-8-chinolinole Platz finden.

     

NMR Studies of Mixed-Ligand Lanthanide Complexes in Solution: Pseudorotation and Ring Inversion of 18-Crown-6 Molecule in Cerium Subgroup Chelates

¹H and ¹³C NMR measurements are reported for the CDCl₃ and CD₂Cl₂ solutions of [La(NO₃)₃(18-crown-6)] (I), [Pr(NO₃)₃(18-crown-6)] (II) and [Ce(NO₃)₃(18-crown-6)] (III) complexes. Temperature dependencies of the ¹H NMR spectra of II have been analyzed using the dynamic NMR methods for multi-site exchange. Two types of conformational dynamic processes in II were identified (the first one with activation enthalpy ΔH ^‡=26 ± 4 kJ/mol is conditioned by interconversion of complex enantiomeric form and pseudorotation of macrocycle molecule upon the C ₂ symmetry axis, the second one with ΔH ^‡=46 ± 5 kJ/mol is conditioned by macrocycle molecule inversion). Studies of the values of the lanthanide-induced shifts revealed that the structure of complexes in solution is similar to that reported for the complex I in the crystal state.This revised version was published online in July 2005 with a corrected issue number.     

Solution properties of exocellular polysaccharides of rhizobium leguminosarum. Static and dynamic light-scattering: Characterization in dilute solution

Three polysaccharides, Rhizobium leguminosarum 8002 EPS(I), Rhizobium trifolii TA1-EPS (II), Rhizobium leguminosarum 127K87 EPS (III), produced by bacteria of Rhizobium genus have been investigated by static and dynamic light scattering combined with chirooptical measurements. All three polymers have the same backbone but differ in the length of the side chains and in the content of minor substituents. An isothermal conformational transition coil → helix was observed with I and II by adding salt (NaCl). The molecular parameters of the polysaccharides in the ordered state were determined by light-scattering data. Increasing the ionic strength a shrinking of the helix was observed accompanied by a corresponding decrease in the radius of gyration. An extraordinary chain stiffness in terms of Kuhn segment lengths was found in both cases, similar to that already observed for other microbial polysaccharides. In the case of III no disorder → order transition was induced by the salt, and the scattering behavior corresponds to that of a rather flexible polymer with a characteristic ratio C_∞ = 24. The incapability of III to form a helical structure is attributed to the effect of the very long side chain. The analysis of the time correlation functions revealed typical flexible chain behavior for all three polysaccharides. This behavior for the two ordered polymers is in agreement with a recent theory by Maggs and is due to bending modes of the rods. ©1995 John Wiley & Sons, Inc.     

Chromatography of glycols. Regularities in the retention of C3−C6 branched glycols in gas-solid and gas-liquid chromatography

Summary Linear correlation between the major physico-chemical properties of glycols and their relative retention volumes measured by gas-solid (GSC) and gas-liquid (GLC) chromatography is shown. The coefficients of the linear regression equations describing the relationship between the relative retention volumes and the physico-chemical parameters (boiling point, density, etc.) are given. The values of the change in the free energy for the stationary phases studied are given as well as the increments of this change per −CH₂- and CH₃-group. The main factors determining the retention of branched glycols on Polysorb, Tween and poly(ethylene glycol) are shown to be the distance between the hydroxyl groups in their molecules, the presence of alkyl substituents and the type and the number of these substituents.     

Enhanced skin anti-inflammatory and moisturizing action of gold nanoparticles produced utilizing Diospyros kaki fruit extracts

Inflammatory skin diseases (ISD) cause very severe itchy skin and dryness which is now a days an important issue which has to be taken care. Nanotechnology plays a main role in manufacturing cosmetic ingredients at a nanoscale size. Among different nanoparticles, gold (Au) is one of the non-toxic materials synthesized organically or inorganically. For synthesizing nanoparticles (NPs), using inorganic methods may cause some toxicity to cells, but using organic synthesis like plant extract is less toxic and environmentally friendly. Therefore, we synthesized DK-AuNPs using Diospyros kaki fruit extract. UPLC-MS/MS was used to evaluate phytochemicals responsible for converting salt into nanoparticles. The DK-AuNPs were characterized to confirm the formation of NPs. Furthermore, we analyzed the activity of DK-AuNPs on human keratinocytes (HaCaT cells). The DK-AuNPs showed 98.2 % cell survival upto 200 µg/mL against HaCaT cells. Additionally, compared to DK treatment, DK-AuNPs therapy decreased ROS production in TNF-α/IFN-γ (T + I) stimulated HaCaT cells by 68.7 %, whereas DK treatment reduced ROS generation by 27.8 %. Moreover, the skin anti-inflammatory potential and moisturizing effect of DK-AuNPs were analyzed using HaCaT cells. Furthermore, skin inflammatory activity biomarkers were downregulated through the MAPK/NFκB signaling pathway and showed significant inhibition by DK-AuNPs. Also, the skin moisturizing biomarkers such as HAS (1–3) were upregulated and HYAL (1–2) were downregulated by PI3K/AKT/NFκB through HAS2 regulation. Therefore, skin anti-inflammatory and moisturizing activity were enhanced by treatment with DK-AuNPs. In summary, we conclude that the DK-AuNPs could be a new alternative for skin disease.