Amphiphilic block and statistical copolymers with pendant glucose residues: Controlled synthesis by living cationic polymerization and the effect of copolymer architecture on their properties

Amphiphilic block and statistical copolymers of vinyl ethers (VEs) with pendant glucose residues were synthesized by the living cationic polymerization of isobutyl VE (IBVE) and a VE carrying 1,2:5,6‐di‐O‐isopropylidene‐D ‐glucose (IpGlcVE), followed by deprotection. The block copolymer was prepared by a two‐stage sequential block copolymerization, whereas the statistical copolymer was obtained by the copolymerization of a mixture of the two monomers. The monomer reactivity ratios estimated with the statistical copolymerization were r₁ (IBVE) = 1.65 and r₂ (IpGlcVE) = 1.15. The obtained statistical copolymers were nearly uniform with the comonomer composition along the main chain. Both the block and statistical copolymers had narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight ∼ 1.1). Gel permeation chromatography, static light scattering, and spin–lattice relaxation time measurements in a selective solvent revealed that the block copolymer formed multimolecular micelles, possibly with a hydrophobic poly(IBVE) core and a glucose‐carrying poly(VE) shell, whereas the statistical copolymer with nearly the same molecular weight and segment composition was molecularly dispersed in solution. The surface properties of the solvent‐cast films of the block and statistical copolymer were also investigated with the contact‐angle measurement. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 459–467, 2001     

Preparation,fractionation, and dilute-solution behavior of ABA poly(methyl methacrylate-b-α-methylstyrene) block copolymers

The preparation by anionic polymerization of six ABA poly(methyl methacrylate-b-α-methylstyrene) block copolymers and of sixteen poly(α-methylstyrene)s is described. The block copolymers, of similar molecular weight but with different chemical compositions, were fractionated by preparative gel permeation chromatography and their behavior in dilute solution was investigated using viscometry. The results obtained indicate that the intramolecular phase separation does not occur under the conditions utilized, the block copolymers assuming randomcoil configurations in all of the copolymer/solvent systems studied. Consequently the block copolymer molecules are more expanded than homopolymers of the same molecular weight. The series of poly(α-methylstyrene)s covered the molecular weight range 2.7 × 10³–1.3 × 10⁶ and enabled the determination of Mark–Houwink–Sakurada constants for poly(α-methylstyrene) in the solvents chosen for the block copolymer studies.     

Synthesis of poly(ethylene glycol) block copolymers by a redox process and their spectral characterization

Novel block copolymers of poly(ethylene glycol) (PEG) with acrylamide (AAm) and methacrylic acid (MAA) were synthesized using a redox system consisting of ceric ions and PEG in aqueous acidic medium. The molecular weight of PEG in the redox system was varied to obtain a series of block copolymers with differing molecular weights of PEG segment. The polymerization proceeded via macroradical generation, which was substantiated by ESR spectroscopy. This macroradical acted as a redox macroinitiator for the block copolymerization of the vinyl monomers. The formation of the block copolymers was confirmed by fractional precipitation technique.     

Synthesis, post-modification and self-assembled thin films of pentafluorostyrene containing block copolymers

Block copolymers consisting of a pentafluorostyrene (PFS) block and a hydrophilic block were synthesized by RAFT polymerisation. The hydrophilic blocks consist of methacrylate derivatives, 4-hydroxystyrene or 4-vinylpyridine monomers. The block copolymers were obtained with narrow molecular weight distributions and the molecular weights were in good agreement with the theoretical values. In addition, a model thiol was reacted with the PFS moieties of the block copolymers. This polymer–analogous reaction was performed under ambient conditions in high yields resulting quantitatively in para-substitution of the pentafluorophenyl rings. Finally, thin films consisting of block copolymers that showed strong phase-segregation behaviour and ordered nanostructured surfaces consisting of both blocks were obtained.     

Synthesis and characterization of hydrophilic thermotropic block copolyetheresters

The block copolyetheresters with a hard segment of poly (hexamethylene p,p′-bibenzoate) and a soft segment of poly (ethylene oxide) were prepared by melt polycondensation of dimethyl-p,p′-bibenzoate, 1,6-hexanediol, and polyethylene glycol (PEG) with molecular weights of 400, 1000, 2000, or 4000. These block copolyetheresters were characterized by intrinsic viscosity, GPC, FT-IR, ¹H-NMR, and water absorption. The thermotropic liquid crystalline properties were investigated by DSC, polarized microscope, and x-ray diffraction. The block copolyetheresters exhibit smectic liquid crystallinity due to the polyester segment. The transitions are dependent on the molar content and the molecular weight of PEG used. The block copolyetheresters show high water absorption due to the hydrophilic nature of the poly (ethylene oxide) segment. The water absorption increases with increasing PEG content. As the molecular weight of PEG increases, the water absorption increases significantly. The results indicate that the water absorption of the poly (ethylene oxide) segment in the block copolymers is affected by the presence of polyester segments. © 1995 John Wiley & Sons, Inc.     

Synthesis and properties of polydimethylsiloxane-containing block copolymers via living radical polymerization

Polydimethylsiloxane (PDMS) block copolymers were synthesized by using PDMS macroinitiators with copper-mediated living radical polymerization. Diamino PDMS led to initiators that gave ABA block copolymers, but there was low initiator efficiency and molecular weights are somewhat uncontrolled. The use of mono- and difunctional carbinol–hydroxyl functional initiators led to AB and ABA block copolymers with narrow polydispersity indices (PDIs) and controlled number-average molecular weights (M_n's). Polymerization with methyl methacrylate (MMA) and 2-dimethylaminoethyl methacrylate (DMAEMA) was discovered with a range of molecular weights produced. Polymerizations proceeded with excellent first-order kinetics indicative of living polymerization. ABA block copolymers with MMA were prepared with between 28 and 84 wt % poly(methyl methacrylate) with M_n's between 7.6 and 35 K (PDI <1.30), which show thermal transitions characteristic of block copolymers. ABA block copolymers with DMAEMA led to amphiphilic block copolymers with M_n's between 9.5 and 45.7 K (PDIs of 1.25–1.70), which formed aggregates in solution with a critical micelle concentration of 0.1 g dm⁻³ as determined by pyrene fluorimetry experiments. Monocarbinol functional PDMS gave AB block copolymers with both MMA and DMAEMA. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1833–1842, 2001     

Effect of molecular architecture on micellization, drug loading and releasing of multi-armed poly(ethylene glycol)-b-poly(ε-caprolactone) star polymers

This study investigated the effect of molecular architecture of amphiphilic star polymers on micelle formation and drug loading and releasing. For this, multi-armed star block copolymers having poly(ethylene glycol) as a hydrophilic block and poly(ε-caprolactone) as a hydrophobic block were synthesized by using a divergent synthetic method consisting of a coupling reaction and a ring opening polymerization. The molecular weight and molecular weight distribution of the block copolymers were characterized by ¹H NMR and GPC measurements. Dynamic light scattering and fluorescence spectroscopic analysis were employed to observe micellization, drug loading, and drug release behaviors. We have figured out that the number of arms is a critical factor that changes critical micelle concentration as well as drug loading and releasing behaviors; increase in the number of arms not only led to lowering the critical micelle concentration and drug release rate but also increased the micelle size and drug loading efficiency.     

Facile one‐pot synthesis of linear and radial block copolymers of styrene and isoprene through a novel coupling agent by living anionic polymerization

A new methodology is successfully used for the concurrent synthesis of three different copolymers; diblock, triblock, and three‐armed star‐block copolymers of styrene and isoprene via the living anionic polymerization with control over the molecular weight and weight fractions of each block. The room temperature polymerization process has resulted in the well defined linear and radial block copolymers, when the living di‐block of poly(styrene‐b‐isoprene) was coupled using cheap and readily available malonyl chloride as a novel coupling agent giving nearly 100% yield. The resulting block copolymers have narrow polydispersity index (PDI = 1.01–1.09) with a good agreement between the calculated and the observed molecular weights. The results are further supported by fractionation of the block copolymers by reversed‐phase temperature gradient interaction chromatography (RP‐TGIC) technique followed by size exclusion chromatography (SEC). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2636–2641, 2010     

Synthesis and micellar behavior of poly(vinyl alcohol-<Emphasis Type="Italic">b</Emphasis>-styrene) copolymers containing PVA blocks with different syndiotacticity

Poly(vinyl alcohol-b-styrene) (poly(VA-b-St)) diblock copolymers with different syndiotacticity of poly(vinyl alcohol) (PVA) block were synthesized via consecutive telomerization, atom transfer radical polymerization, and saponification. These amphiphilic block copolymeric micelles were prepared by dialysis against water. Dynamic light scattering and transmission electron micrograph measurements confirmed the formation of a micelles, and the size of a micelle was less than 100 nm and increased with the molecular weight of polystyrene (PS) block. From the fluorescence emission spectrum measurements using pyrene as a fluorescence probe, the copolymers formed micelles with critical micelle concentration (CMC) in the range of 0.125–4.47 mg/l. The CMC values increase with decrease of the molecular weight of the PS block and increase of the syndiotacticity of PVA block. Kinetic stability study of micelles showed increased stability for block copolymers containing PVA block with higher syndiotacticity.     

Improving holographic writing performance of photo‐orientable azobenzene polymers by molecular glasses

Long‐term stable holographic volume gratings in azobenzene‐containing films have potential applications as forgery‐proof security features or in holographic data storage. However, azobenzene‐based polymer systems often lack sufficiently high writing speeds. Here, an approach to improve the holographic writing performance of photo‐orientable azobenzene‐containing polymers by blending with azobenzene molecular glasses is presented. The molecular glass enhances the photo‐plastification effect and, consequently, the writing speed. This concept of improving the holographic performance of photo‐orientable azobenzene polymers with azobenzene molecular glasses is demonstrated with a homopolymer and two block copolymers. In the azobenzene homopolymer, an addition of 10 wt % of the molecular glass leads to a doubling of the writing speed. Simultaneously, the long‐term stability of inscribed gratings is maintained. In case of the block copolymers, the molecular glass is present in the polystyrene matrix and accumulates in the azobenzene minority phase. Adding 5–10 wt % of molecular glass improves the writing speed of the azobenzene block copolymer by a factor of 3–4. An addition of 15 wt % of molecular glass to the block copolymer containing azobenzene and nonphotoactive mesogenic side groups reduces the writing time by a factor of 15 and the long‐term stability of the gratings is retained. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2110–2117     

The preparation and properties of BAB block copolymers based on polyethylene sulphide and polyisoprene

Block copolymers of ethylene sulphide (B) and isoprene (A) have been prepared by anionic synthesis using alkali metal complexes of naphthalene as initiator. Two series of block copolymers have been synthesized, one (based on sodium naphthalenide as initiator) having high molecular weights and the other (based on lithium naphthalenide) having low molecular weights.Physical properties of the block copolymers as a function of composition, molecular weight and polyisoprene microstructure have been studied. Polymers containing high molecular weight polyethylene sulphide sequences were difficult to process without degradation. By lowering the molecular weight of the polyethylene sulphide segment, block copolymers of improved processibility were obtained.The centre block polyisoprene microstructure has been varied from 100% 1,2/3,4 configuration to 80% 1,4 configuration by preparing a “seed” polymer in tetrahydrofuran followed by solvent removal and replacement by hexane. Changes in microstructure affect low temperature flexibility, resilience and tensile strength of the block copolymer.The BAB block copolymers are biphasic and exhibit elastomeric properties with improved network stability compared with polystyrene-polybutadiene-polystyrene ABA block copolymers.     

三元多嵌段共聚物分子链结构的统计表征

本文根据三元多嵌段共聚反应的一般模型,运用母函数方法,严格推导出了型三元多嵌段共聚物的分子量分布及平均分子量的解析表达式.对几种具有特殊分布的预聚体进行了讨论.     

Azobenzene‐Containing Block Copolymers as Light‐Induced Reworkable Adhesives: Effects of Molecular Weight,Composition, and Block Copolymer Architectures on the Adhesive Properties

We previously reported that ABA‐type triblock copolymers with azobenzene‐containing terminal blocks can be utilized as a light‐induced reworkable adhesive that enables repeatable bonding and debonding on demand. The reworkability was based on the photoisomerization of the azobenzene moiety and concomitant softening and hardening of the azo blocks. Our aim in this study is to investigate the effect of the composition, molecular weight, and block copolymer architectures on the reworkable adhesive properties. For this purpose, we prepared AB diblock, ABA triblock, and 4‐arm (AB)₄ star‐block copolymers consisting of polymethacrylates bearing an azobenzene moiety (A block) and 2‐ethylhexyl (B block) side chains and performed adhesion tests by using these block copolymers. As a result, among the ABA block copolymers with varied compositions and molecular weights, the ABA triblock copolymers with an azo block content of about 50 wt % and relatively low molecular weight could achieve an appropriate balance between high adhesion strength and low residual adhesion strength upon UV irradiation. Furthermore, the 4‐arm star‐block structure not only enhances the adhesion strength, but also maintains low residual adhesion strength when exposed to UV irradiation. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 806–813     

Redox polymerization process: An efficient tool for the synthesis of block copolymers

The synthesis of poly(acrylonitrile)-block-poly-(ethylene glycol)-block-poly(acrylonitrile) copolymers has been carried out using a redox system consisting of ceric ion and poly(ethylene glycol)s of various molecular weights in aqueous medium. The generation of intermediate radicals in the redox process has been confirmed by ESR spectroscopy and the polymerization progressing through ‘blocking from’ mechanism has been postulated. The formation of the block copolymers has been confirmed by chemical tests and fractional precipitation technique as well as by FT-IR and FT-NMR [¹H and ¹³C–(¹H)] spectroscopic techniques. The triblock nature of the block copolymers has been ascertained through the cleavage of ether linkage of the PEG segment. TG/DTA studies of the block copolymers with PEG molecular weights of 1000 and above revealed two-stage decomposition, while their DSC traces exhibited a shift in the melting peak of PEG. GPC investigations of the block copolymers manifested a high homogeneity with unimodal distribution of molecular weights. SEM studies indicated significant changes in the morphological characteristics of the block copolymers. © 1995 John Wiley & Sons, Inc.     

Quasiliving Carbocationic Polymerization. XIV. Synthesis of Poly(styrene-b-Isobutylene)

The synthesis of poly(styrene-b-isobutylenes) by the sequential addition of styrene and isobutylene has been accomplished. First a stream of styrene was added to a cumyl chloride/TiCl₄ in nhexane/methylene chloride charge at -50°C under quasiliving conditions. After the polystyrene block has reached a desirable sequence-length (molecular weight), gaseous isobutylene was continuously introduced to the quasiliving polystyrene carbocation until the polyisobutylene block also reached a desirable molecular weight. The M _n versus monomer input plot was uninterrupted and linear over both monomer introduction phases, indicating quasi-living conditions over the entire regime of block copolymer synthesis. The block copolymers have been characterized by selective solvent extraction and GPC, and their compositions determined by ¹H-NMR spectroscopy.     

Molecular characteristics and surface layer structure of poly(siloxane imides)

The effects of spontaneous ordering of molecular chains of poly(siloxane imide) block copolymers in the surface layers of thin films on glass and gold supports have been studied by the oblique polarized beam and photoelasticity methods. The effective thermodynamic rigidity of molecular chains of the block copolymers (the statistical segment length) has been found to be A = 10.4 × 10^?7 cm. The orientational ordering of molecular chains in poly(siloxane imide) surface layers is characterized by small values of the orientational order parameter (S ₀ ～ 0.007). This finding is explained by the microphase separation of the block copolymers. The evaporated gold layer contributes to the effect of surface birefringence owing to formation of the ordered system composed of islets—clusters of gold atoms.     

Synthesis and properties of polyetheretherketone–polydimethylsiloxane block copolymers

Polyetheretherketone-polydimethylsiloxane (PEEK–PDMS) block copolymers were synthesized from the condensation of dimethylamino terminated PDMS and hydroxy terminated PEEK oligomers in 1-chloronapthalene. Yields for block copolymers synthesised from low molecular weight PDMS oligomers were good but yields were significantly reduced when higher molecular weight PDMS oligomers were used. This was related to the limited solubility of higher molecular weight PDMS in the reaction solvent. Differential scanning calorimetry (DSC) studies indicated that phase separation of the block copolymers occurred at very short segment length (M?_n < 4000). A depression in the crystallinity of both the PEEK and PDMS phases in the block copolymer was observed. Thermogravimetric analysis (TGA) studies indicated that the PEEK–PDMS block copolymers displayed insufficient thermo-oxidative stability to be melt-processed successfully in PEEK based blends.     

Temperature‐induced Molecular Chain Motions of Styrenic Triblock Copolymers Studied by Intrinsic Fluorescence Spectra

The temperature‐induced molecular chain motions of styrenic triblock copolymers (SBC), i.e. polystyrene‐block‐polybutadiene‐block‐polystyrene (SBS) and polystyrene‐block‐poly(ethylene‐co‐1‐butene)‐block‐polystyrene (SEBS), were studied by intrinsic fluorescence method. For SBS, the glass transition temperatures (T_gs) of B block and S block obtained by intrinsic fluorescence method were in good agreement with differential scanning calorimetry measurements (DSC). In the case of SEBS, an isoemission point was observed at about 310 nm at elevated temperatures, suggesting the slight conversion between the monomer and excimer emission. On this basis, the molecular chain motion of SEBS was monitored by both fluorescence intensity and excimer/monomer fluorescence ratio. Besides the T_gs of S block and EB blocks, a melting point (T_m) of weak crystalline in EB block was unambiguously determined by intrinsic fluorescence. Furthermore, it was found that the melting process directly led to the slight loosening of PS segments in interface and consequently the reduction of the amount of excimer. A reasonable mechanism was proposed to describe the molecular chain movements and phase transitions of SEBS upon heating. Moreover, the influence of temperature on the apparent activation energy of non‐radiative process (E_a^T) around T_g of S block was much stronger than that around T_g of B or EB blocks.     

Conformation of block cooligomer macromolecules containing a discotic block

The conformation of block cooligomers that contain a block of eight 2,6,7,10,11-pentapentyloxy-3-(3-acryloylpropyloxy)triphenylene units and a poly(tert-butyl acrylate) block with a length varying from 6 to 300 monomer units was calculated by means of molecular dynamics with the DREIDING force field. The influence of the length of the flexible-chain block of the amorphous polymer on the conformation and structure of the block cooligomer at the level of a single macromolecule was revealed. A tendency toward the screening of the short mesogen-containing block by the flexible-chain polymer block with an increase in its length was demonstrated.     

Synthesis and characterization of amphiphilic diblock copolymers of methyl tri(ethylene glycol) vinyl ether and isobutyl vinyl ether

Water-soluble diblock copolymers of methyl tri(ethylene glycol) vinyl ether (hydrophilic block) and isobutyl vinyl ether (hydrophobic block) of different molecular weights and composition were synthesized by living cationic polymerization. The molecular weight and comonomer composition of these copolymers were determined by GPC and ¹H NMR spectroscopy, respectively. Aqueous solutions of the copolymers were characterized in terms of their micellar behavior using dynamic light scattering, aqueous GPC, and dye solubilization. All the copolymers formed aggregates with the exception of a diblock copolymer with only two hydrophobic monomer units. The micellar hydrodynamic size scaled with the 0.61 power of the number of hydrophobic units, in good agreement with a theoretical exponent of 0.73. An increase in the length of the hydrophobic block at constant hydrophilic block length or an increase in the overall polymer size at constant block length ratio both resulted in lower critical micelle concentrations (cmcs). The cloud points of 1% w/w aqueous solutions of the polymers were determined by turbidimetry. An increase in the length of the hydrophobic block at constant hydrophilic block length caused a decrease in the cloud points of the copolymers. However, an increase in the overall polymer size at constant block length ratio led to an increase in the cloud point. © 1996 John Wiley & Sons, Inc.