New poly(amide–imide) syntheses. XXI. Synthesis and properties of aromatic poly(amide–imide)s based on 2,6-bis(4-trimellitimidophenoxy)naphthalene and aromatic diamines

A novel polymer-forming diimide–diacid, 2,6-bis(4-trimellitimidophenoxy)naphthalene, was prepared by the condensation reaction of 2,6-bis(4-aminophenoxy)naphthalene with trimellitic anhydride (TMA). A series of novel aromatic poly(amide–imide)s containing 2,6-bis(phenoxy)naphthalene units were prepared by the direct polycondensation of the diimide–diacid with various aromatic diamines using triphenyl phosphite (TPP) in N-methyl-2-pyrrolidone (NMP)/pyridine solution containing dissolved calcium chloride. Thirteen of the obtained polymers had inherent viscosities above 1.01 dL/g and up to 2.30 dL/g. Most of polymers were soluble in polar solvents such as DMAc and could be cast from their DMAc solutions into transparent, flexible, and tough films. These films had tensile strengths of 79–117 MPa, elongation-at-break of 7–61%, and initial moduli of 2.2–3.0 GPa. The wide-angle X-ray diffraction revealed that some polymers are partially crystalline. The glass transition temperatures of some polymers could be determined with the help of differential scanning calorimetry (DSC) traces, which were recorded in the range 232–300°C. All the poly(amide–imide)s exhibited no appreciable decomposition below 450°C, and their 10% weight loss temperatures were recorded in the range 511–577°C in nitrogen and 497–601°C in air. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 919–927, 1998     

Novel poly(amide-imide)s from 2,6-bis(5-amino-1-naphthoxy) pyridine

Reaction of 5-amino-1-naphthol with 2,6-dichloropyridine resulted in preparation of 2,6-bis(5-amino-1-naphthoxy) pyridine (AN). This pyridine-based ether diamine was reacted with two moles of trimellitic anhydride (TMA) to synthesize related diimide-diacid (DIDA). Direct polycondensation reaction of DIDA with different diamines in the presence of triphenyl phosphite (TPP) afforded seven different poly(amide-imide)s. All the polymers were characterized and their physical and thermal properties were studied. The inherent viscosity of the polymers was about 0.44-0.50 dl g⁻¹ and they showed high thermal stability.     

Chromium(III) complexes bearing bis(benzotriazolyl)pyridine ligands: synthesis,characterization and ethylene polymerization behavior

Reaction of benzotriazole with 2,6-bis(bromomethyl)pyridine and 2,6-pyridinedicarbonyl dichloride yields the tridentate ligands 2,6-bis(benzotriazol-1-ylmethyl)pyridine (1) and 2,6-bis(benzotriazol-1-ylcarbonyl) pyridine (2). The molecular structures of the ligands were determined by single-crystal X-ray diffraction. These ligands react with CrCl₃(THF)₃ in THF to form neutral complexes, [CrCl₃{2,6-bis(benzotriazolyl)pyridine-N,N,N}] (3, 4), which are isolated in high yields as air stable green solids and characterized by mass spectra (ESI), FTIR spectroscopy, UV–Visible, thermogravimetric analysis (TGA), and magnetic measurements. After reaction with methylaluminoxane (MAO), the chromium(III) complexes are active in the polymerization of ethylene showing a bimodal molecular weight distribution. A DFT computational investigation of the polymerization reaction mechanism shows that the most likely reaction pathway originates from the mer configuration when the spacer is CH₂ (complex 3) and from the fac configuration when the spacer is CO (complex 4).     

Synthesis of high molecular weight poly(ether ketone)s by polycondensation of activated bis(aryl chloride)s with bisphenolates

The ability to achieve high molecular weight poly(ether ketone)s from the polycondensation of bis(aryl chloride)s with bis(phenolate)s has been consistently demonstrated. The polymerizations presented here help to delineate for specific bis(aryl chloride)/bisphenolate pairs the reaction conditions required to obtain high molecular weight polymers. Polycondensation of 1,3-bis(4-chlorobenzoyl)-5-tert-butylbenzene ( 6 ) and 2,2′-bis(4-chlorobenzoyl)-biphenyl ( 15 ) with various bisphenolates as well as of 2,2′-bis(4-hydroxyphenoxy)biphenyl ( 33 ) with 4,4′-dichlorobenzophenone ( 41 ) and 1,3-bis(4-chlorobenzoyl)benzene ( 43 ) were used as representative model systems to select reaction conditions that led to high molecular weight polymers. © 1995 John Wiley & Sons, Inc.     

1,3-二(2,6-二甲基苯基)-2-四氢咪唑基-苯亚甲基-二吡啶基-二氯合钌化合物的合成

设计了由1,3-二(2,6-二甲基苯基)-2-四氢咪唑基-苯亚甲基-三苯基膦-二氯合钌(7)和吡啶反应生成无膦型金属钌卡宾化合物1,3-二(2,6-二甲苯基)-2-四氢咪唑基-苯亚甲基-2-吡啶基-二氯合钌(8),8作为高效催化剂用于丙烯腈和烯丙基苯的交叉交互置换反应.新化合物7,8经核磁共振氢谱、碳谱和高分辨率质谱予以证实.     

1,3-二(2,6-二甲基苯基)-2-四氢咪唑基-苯亚甲基-二吡啶基-二氯合钌 化合物的合成

设计了由1,3-二(2,6-二甲基苯基)-2-四氢咪唑基-苯亚甲基-三苯基膦-二氯合钌(7)和吡啶反应生成无膦型金属钌卡宾化合物1,3-二(2,6-二甲苯基)-2-四氢咪唑基-苯亚甲基-2-吡啶基-二氯合钌(8), 8作为高效催化剂用于丙烯腈和烯丙基苯的交叉交互置换反应. 新化合物7, 8经核磁共振氢谱、碳谱和高分辨率质谱予以证实.     

Synthesis of 5-fluorouracil-imprinted polymers with multiple hydrogen bonding interactions.

The antitumor active compound 5-fluorouracil (5-FU) was used as a target molecule and 5-FU-imprinted polymers were synthesized using 2,6-bis(acrylamido)pyridine and/or 2-(trifluoromethyl)acrylic acid as functional monomers. The 5-FU-imprinted polymers showed a higher affinity for 5-FU than that for 5-FU derivatives. By using both functional monomers simultaneously, the affinity and separation for 5-FU were improved.     

New poly (amide-imide) syntheses. IX. Preparation and properties of poly(amide-imide)s derived from 2,7-bis (4-aminophenoxy) naphthalene and various bis (trimellitimide)s

Eleven bis(phenoxy) naphthalene-containing poly(amide-imide)s IIIa–k were synthesized by the direct polycondensation of 2,7-bis (4-aminophenoxy) naphthalene (DAPON) with various aromatic bis (trimellitimide)s IIa–k in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. Poly (amide-imide)s IIIa–k having inherent viscosities of 0.70–1.12 dL/g were obtained in quantitative yields. The polymers containing p-phenylene or bis(phenoxy) benzene units exhibited crystalline x-ray diffraction patterns. Most of the polymers were readily soluble in various solvents such as NMP, N, N-dimethylacetamide, dimethyl sulfoxide, m-cresol, o-chlorophenol, and pyridine, and gave transparent, and flexible films cast from DMAc solutions. Cast films showed obvious yield points in the stress-strain curves and had strength at break up to 87 MPa, elongation to break up to 11%, and initial modulus up to 2.10 GPa. These poly(amide-imide)s had glass transition temperatures in the range of 255–321°C, and the 10% weight loss temperatures were recorded in the range of 529–586°C in nitrogen. The properties of poly(amideimide)s IIIa–k were compared with those of the corresponding isomeric poly (amide-imide)s III′ prepared from 2,7-bis(4-trimellitimidophenoxy) naphthalene and aromatic diamines. © 1994 John Wiley & Sons, Inc.     

A novel synthesis of reactive polymers with pendant halomethyl groups by the polyaddition reaction of bis(epoxide)s with bis(chloroacetoxy)esters or bis(bromoacetoxy)esters

New reactive polymers with pendant halomethyl groups were successfully synthesized by polyaddition reactions of bis(epoxide)s with bis(chloroacetoxy)ester such as 1,4-bis [(chloroacetoxy)methyl]benzene (BCAMB) or 1,4-bis[(bromoacetoxy)methyl]benzene (BBAMB) using quaternary onium salts or crown ether complexes as catalysts. The polyaddition reaction of diglycidyl ether of bisphenol A (DGEBA) with BCAMB proceeded very smoothly with high yields (83–96%) by the addition of quaternary onium salts such as tetrabutylphosphonium bromide (TBPB) or crown ether complexes such as 18-crown-6/KBr as catalysts to produce high molecular weight polymers, although the reaction occurred without any catalyst to give low molecular weight polymer in low yield at 90°C for 48 h. It was also found that the reaction proceeded smoothly in aprotic polar solvents such as N-methyl-2-pyrrolidone (NMP) and N,N-dimethylacetamide (DMAc) to produce high molecular weight polymers. Polyaddition reactions of DGEBA or digylcidyl ether of ethylene glycol (DGEEG) with BBAMB, other bis(chloroacetoxy)esters or bis(bromoacetoxy)esters using TBPB in DMAc also proceeded smoothly to give the corresponding polymers. The resulting poly(ether-ester)s contain reactive halomethyl groups as side chains, which were introduced during main chain formation. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3791–3799, 1997     

Synthesis and Characterization of High Performance Poly(amide-imide)s based on a New Diimide-diacide and Various Diamines

A new diimide-diacid, (4-(4-(2,6-diphenylpyridin-4yl)phenoxy)phenyl)-1,3-bis(trimellitimidobenzene) (PPMIB), was synthesized from the condensation reaction of a new diamine, (4-(4-(2,6-diphenylpyridin-4yl)phenoxy)phenyl)-3,5-diaminobezamide (PPDA), and trimellitic anhydride carboxylic acid (TMAA) in glacial acetic acid. The diimide-diacid (PPMIB) was characterized by FT-IR, ¹H-NMR and elemental analysis. A series of novel aromatic poly(amide-imide)s (PAIs) was synthesized by using direct polycondensation of PPMIB with various diamines in NMP in the presence of triphenylposphite and pyridine as condensing agents. The resulting PAIs were amorphous, readily soluble in many polar aprotic solvents and showed inherent viscosities of 0.35–0.50 dL/g. According to thermal analysis, these polymers exhibited glass transition temperatures (T_gs) in the range of 202–280°C and temperature of 10% weight loss (T₁₀) varied from 400 to 545°C in N₂. These polymers in NMP solution exhibited strong UV-Vis absorption maxima at 320°C nm and their fluorescence emission peaks appeared around 410–565 nm.     

Synthesis of polyethers with unsymmetrical structures by the polyaddition of 3‐ethyl‐3‐(glycidyloxymethyl)oxetane with diacyl chlorides

Polyethers with unsymmetrical structures in the main chains and pendant chloromethyl groups were synthesized by the polyaddition of 3‐ethyl‐3‐(glycidyloxymethyl)oxetane (EGMO) with certain diacyl chlorides with quaternary onium salts or pyridine as catalysts. The unsymmetrical polyaddition of EGMO containing two different cyclic ether moieties such as oxirane and oxetane groups with terephthaloyl chloride proceeded smoothly in toluene at 90 °C for 6 h to give polymer 1 with a number‐average molecular weight (M_n) of 51,700 in a 93% yield when tetrabutylammonium bromide (TBAB) was used as a catalyst. The polyaddition also proceeded smoothly under the same conditions when other quaternary onium salts, such as tetrabutylammonium chloride, tetrabutylammonium iodide, tetrabutylphosphonium chloride, and tetrabutylphosphonium bromide, and pyridine were used as catalysts. However, without a catalyst no reaction occurred under the same reaction conditions. Polyadditions of EGMO with isophthaloyl chloride and adipoyl chloride gave polymer 2 (M_n = 28,700) and polymer 3 (M_n = 25,400) in 99 and 65% yields, respectively, under the same conditions. The chemical modification of the resulting polymer, polymer 1 , which contained reactive pendant chloromethyl groups, was also attempted with potassium 3‐phenyl‐2,5‐norbornadiene‐2‐carboxylate with TBAB as a phase‐transfer catalyst, and a polymer with 65 mol % pendant norbornadiene moieties was obtained. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 368–375, 2001     

Comparative study of NS(2)(S-aryl) pyridine-based dithia-containing ligands with different substituent groups. Reactivity toward Cu(II) and Ru(II)

Ligands LX of the type NS(2) with S-aryl substituents which incorporate the unit 2,6-bis(thiomethyl)pyridine modified with functional groups bonded to the aromatic moieties, either on the phenyl or on the pyridine, are produced. Electron-withdrawing groups, 3-chloro and 4-nitro, that reduce the pyridine basicity have been introduced. Methoxy or methoxycarbonyl substituents have been incorporated on the thiophenyl moieties. The comparative results from the reaction of these ligands with Cu(ClO(4))(2).6H(2)O and [RuCl(2)(PPh(3))(3)] have revealed that their coordination capacity has not been greatly modified as a result of the introduced groups. Complexes of general formulas [Cu(LX)][ClO(4)](2), except for L5, and [RuCl(2)(LX)(PPh(3))], have been obtained, respectively. The electronic characteristics of these complexes have been studied by cyclic voltammetry experiments. The structures of 2,6-bis[(2'-methoxycarbonyl)phenylthio-methyl]-4-nitropyridine (L5) and [RuCl(2)(L5)(PPh(3))].2CCl(4) have been characterized by single-crystal X-ray diffraction methods.     

Multiple hydrogen bonding-based fluorescent imprinted polymers for cyclobarbital prepared with 2,6-bis(acrylamido)pyridine

A cyclobarbital-imprinted polymer was prepared using a fluorescent functional monomer, 2,6-bis(acrylamido)pyridine, and the polymer showed not only selective binding of cyclobarbital but also enhancement of fluorescence intensity, suggesting that the polymer could be utilized as a selective fluorescence probe.     

Synthesis and characterization of novel polyesters derived from 4-aryl-2,6-bis(4-chlorocarbonyl phenyl) pyridines and various aromatic diols

A new class of aromatic polyesters containing pyridine heterocyclic rings (PE_1-15) was prepared via reactions of 4-aryl-2,6-bis(4-chlorocarbonyl phenyl) pyridines (DAC_1-3) and commercial diols by high temperature solution polymerization method in o-dichlorobenzene and catalytic amount of triethylamine hydrochloride. The optimum condition of polymerization was obtained via study of a model compound prepared from reaction of 4-phenyl-2,6-bis(4-chlorocarbonylphenyl) pyridine (DAC₁) and phenol. All polymers were characterized by FTIR and ¹H-NMR spectroscopies, and their physical properties including solution viscosity, solubility properties, thermal stability and thermal behavior were studied. The prepared polyesters showed excellent thermal stability and good solubility in polar aprotic solvents.     

Regioselective synthesis of optically active (pyrazolyl)pyridines with adjacent quaternary carbon stereocenter: chiral N,N-donating ligands

Novel optically active 2-(pyrazol-1-yl)pyridines have been prepared using resolved the O-methyl ether of atrolactic acid as a source of the adjacent quaternary carbon stereocenter. Different regioisomers were formed selectively in the reaction of 2-hydrazinopyridines with the chiral 1,3-diketone and in the nucleophilic substitution of 2-chloropyridines with the potassium salt of the chiral pyrazole. The second route gave 2-(pyrazol-1-yl)pyridines with the stereogenic center neighboring the coordinating nitrogen in the pyrazole ring. Also, new C₂-symmetric chiral ligands based on 2,6-bis(pyrazolyl)pyridine and 6,6′-bis(pirazolyl)-2,2′-bipyridine structures were obtained.     

Synthesis and properties of aromatic polyamides derived from 2,6-bis(4-aminophenoxy)naphthalene and various aromatic dicarboxylic acids

2,6-Bis(4-aminophenoxy)naphthalene (2,6-BAPON) was synthesized in two steps from the condensation of 2,6-dihydroxynaphthalene with p-chloronitrobenzene in the presence of potassium carbonate, giving 2,6-bis(4-nitrophenoxy)naphthalene, followed by hydrazine hydrate/Pd—C reduction. A series of new polyamides were synthesized by the direct polycondensation of 2,6-BAPON with various aromatic dicarboxylic acids in the N-methyl-2-pyrrolidone (NMP) solution containing dissolved metal salts such as CaCl₂ or LiCl using triphenyl phosphite and pyridine as condensing agents. The polymers were obtained in quantitative yields with inherent viscosities of 0.62–2.50 dL/g. Most of the polymers were soluble in aprotic dipolar solvents such as N,N-dimethylacetamide (DMAc) and NMP, and they could be solution cast into transparent, flexible, and tough films. The casting films had yield strengths of 84–105 MPa, tensile strengths of 68–95 MPa, elongations at break of 8–36%, and tensile moduli of 1.4–2.1 GPa. The glass transition temperatures of the polyamides were in the range 155–225°C, and their 10% weight loss temperatures were above 505°C in nitrogen and above 474°C in air. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2147–2156, 1997     

Preparation and properties of aromatic poly(amide-imide)s derived from N-[3,5-bis(3,4-dicarboxybenzamido)phenyl]phthalimide dianhydride

An imide ring-containing diamide-dianhydride, N-[3,5-bis(3,4-dicarboxybenzamido)phenyl]phthalimide dianhydride (1) was prepared by the reaction of trimellitic anhydride chloride with N-(3,5-diaminophenyl)phthalimide in a medium consisting of methylene chloride and pyridine. A series of new alternating aromatic poly(amide-imide)s having inherent viscosities of 0.26-0.37 dl/g was synthesized using a two-step poly(amic-acid) precursor method. A reference monomer, 1,3-bis(3,4-dicarboxybenzamido)benzene dianhydride (2) without the phthalimido pendant group attached to the polymer main chain was prepared in order to study the structure-property relationship. In this case, the structure effects on some properties of the resulting poly(amide-imide)s including crystallinity, solubility, thermal stability, and film flexibility could be easily clarified. A diamide-triimide (3) as a model compound was also synthesized by the reaction of new dianhydride 1 with aniline to compare the characterization data as well as to optimize the polymerization conditions. The resulting polymers were fully characterized by FT-IR, UV-visible and ¹H NMR spectroscopy. Most of the polymers showed an amorphous nature and were readily soluble in a variety of organic solvents such as N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), N-methyl-2-pyrrolidone (NMP), and pyridine. The glass-transition temperatures of these polymers were recorded between 301 and 371 °C. All polymers showed no significant weight loss below 500 °C in nitrogen, and the decomposition temperatures at 10 wt.% loss range from 506 to 543 °C. The films of the resulting poly(amide-imide)s could be cast from their NMP solutions, and the transparency and flexibility of them were investigated.     

Synthesis and Characterization of 2,5-Bis(2-pyridyl)thiophene

2-[2-(Trimethylsilyl)ethynyl] pyridine ( 6 ) was prepared in 95% yield by reaction of 2-bromopyridine with trimethylsilylacetylene in triethylamine in the presence of bis(triphenylphosphine)Palladium(II) chloride and Copper(I) iodide. Desilylation of ( 6 ) by refluxing with sodium hydroxide in methanol (yield 95%) of 2-ethynylpyridine ( 5 ). Oxidative coupling of ( 5 ) in pyridine by oxygen in the presence of Copper(I) chloride gives 70% yield of 1,4-bis(2-pyridyl)1,3-butadiyne ( 4 ). Reaction of 4 with sodium sulfide affords 100% of 2,5-bis(2-pyridyl) thiophene ( 1 ).     

New poly(amide-imide)s syntheses. VIII. Preparation and properties of poly (amide-imide)s derived from 2,3-bis(4-aminophenoxy)naphthalene,trimellitic anhydride,and various aromatic diamines

The new polymer-forming diimide-diacid, 2,3-bis(4-trimellitimidophenoxy) naphthalene (I), was readily obtained by the condensation reaction of 2,3-bis (4-aminophenoxy) naphthalene with trimellitic anhydride. A series of novel aromatic poly (amide-imide)s were prepared by the direct polycondensation of diimide-diacid I with various aromatic diamines using triphenyl phosphite in N-methyl-2-pyrrolidone (NMP)/pyridine solution containing dissolved calcium chloride. The resultant polymers have inherent viscosities in the range of 0.65–1.02 dL/g at 30°C in N, N-dimethylacetamide. These polymers were readily soluble in various organic solvents and could be cast into transparent, tough, and flexible films. Their casting films showed tensile strength at break up to 86 MPa, elongation to break of 5–9%, and initial moduli up to 2.35 GPa. The wide-angle X-ray diffraction revealed that those polymers containing p-phenylene or p-oxyphenylene group are partially crystalline, and the other polymers are evidenced as amorphous patterns. These polymers show a glass transition in the range of 213–290°C in their differential scanning calorimetry (DSC) traces. The thermal stability of the polymers was evaluated by thermogravimetry analysis, which showed the 10% weight-loss temperatures in the range of 508–565°C in nitrogen and 480–529°C in air atmosphere. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of new soluble aromatic polyimides from 3,4-bis(4-aminophenyl)-2,5-diphenylpyrrole and aromatic tetracarboxylic dianhydrides

Novel aromatic polyimides containing tetraphenylpyrrole unit were synthesized from 3,4-bis(4-aminophenyl)-2,5-diphenylpyrrole and various aromatic tetracarboxylic dianhydrides by the usual two-step procedure that included ring-opening polyaddition and subsequent thermal cyclodehydration. These polymers had inherent viscosities in the 0.20–0.65 dL/g range and were practically amorphous as shown by the X-ray diffraction studies. All the polyimides except for polypyromellitimide were easily soluble in a wide range of organic solvents such as o-chlorophenol, pyridine, 1,3-dimethyl-2-imidazolidone, N,N-dimethylacetamide, and N-methyl-2-pyrrolidone at room temperature. These polyimides had high glass transition temperatures of 302–359°C and exhibited 10% weight loss at temperatures above 510°C in nitrogen.