Electrocatalytic Oxidation and Determination of Cysteamine by Poly‐N,N‐dimethylaniline/Ferrocyanide Film Modified Carbon Paste Electrode

Functionalized poly‐N,N‐dimethylaniline film was prepared by adsorption of ferrocyanide onto the polymer forming at the surface of carbon paste electrode (CPE) in aqueous solution by using potentiostatic method. The electrocatalytic ability of poly‐N,N‐dimethylaniline/ferrocyanide film modified carbon paste electrode (PDMA/FMCPE) was demonstrated by oxidation of cysteamine. Cyclic voltammetry and chronoamperometry techniques were used to investigate this ability. Results showed that pH 7.00 is the most suitable for this purpose. It is found that the catalytic reaction rate constant, (k_h), is equal to 2.142×10³ M^?1 s^?1 by the data of chronoamperometry. The catalytic reduction peak current was linearly dependent on the cysteamine concentration and the linearity range obtained was 8.00×10^?5 M–1.14×10^?2 M. Detection limit was determined 7.97×10^?5 M (2σ). This method has been successfully employed for quantification of cysteamine in real sample.     

Kinetics of reactions of OBrO with NO,O3, OClO,and ClO at 240–350 K

Kinetics for the reactions of OBrO with NO, O₃, OClO, and ClO at 240–350 K were investigated using the technique of discharge flow coupled with mass spectrometry. The Arrhenius expression for the OBrO reaction with NO was determined to be k₁ = (2.37 ± 0.96) × 10^?13 exp[(607 ± 63)/T] cm³ molecule^?1 s^?1. The reactions of OBrO with O₃, OClO, and ClO are slow chemical processes at 240–350 K. Upper limit rate constants for the OBrO reactions with O₃, OClO, and ClO at 240–350 K were estimated to be k₂ < 5.0 × 10^?15 cm³ molecule^?1 s^?1, k₃ < 6.0 × 10^?14 cm³ molecule^?1 s^?1, and k₄ < 1.5 × 10^?13 cm³ molecule^?1 s^?1, respectively. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 430–437, 2002     

Pulse radiolysis studies of intermolecular charge transfers involving tryptophan and three-electron-bonded intermediates derived from methionine

The oxidation processes of the radiation-generated, three-electron-bonded intermediates AcMet₂ [S??S]⁺ and AcMet [S??Br] were investigated by pulse radiolysis via their reactions with tryptophan (TrpH). These intermediates were derived from N-acetyl-methionine amide (N-AcMetNH₂) and N-acetyl-methionine methyl ester (N-AcMetOMe). The bimolecular rate constant k of the reaction between each intermediate and l-tryptophan (TrpH) was measured. For N-AcMetNH₂, k for the reaction of AcMet₂ [S??S]⁺ with TrpH were 3.4?×?10⁸ and 2.2?×?10⁸?dm³?mol^?1?s^?1 at pH?=?1 and 4.5, respectively. For N-AcMetOMe, k for the reaction of AcMet₂ [S??S]⁺ with TrpH were 4.0?×?10⁸ and 2.8?×?10⁸?dm³?mol^?1?s^?1 at pH 1 and 4.5, respectively. The rate constants for the intermolecular transformation of Met [S??Br] into TrpH⁺ or Trp were also estimated. For N-AcMetNH₂, k for the reaction of AcMet₂ [S??Br] with TrpH were 2.6?×?10⁸ and 3.3?×?10⁸?dm³?mol^?1?s^?1 at pH 1 and 4.5, respectively. Related mechanisms were discussed.     

Thermal Studies of New Lead(II) Coated‐Wire Membrane Electrodes

Five plastic membrane Pb²⁺‐selective electrodes were prepared based on 1,4‐bis(N‐tosyl‐o‐aminophenoxy)butane I , 1,4‐bis(N‐allyl‐N‐tosyl‐o‐aminophenoxy)butane II , 1,4‐bis(N‐benzyl‐N‐tosyl‐o‐aminophenoxy)butane III , 1,4‐bis[N‐(o‐allyloxybenzyl)‐N‐tosyl‐o‐aminophenoxy]butane IV , and 1,4‐bis(N‐octyl‐N‐tosyl‐o‐aminophenoxy)butane V as neutral carriers. The electrodes exhibited nearly Nernstian responses over the concentration ranges, 2.5×10^?4–4.0×10^?2, 2.5×10^?5–4.0×10^?2, 7.9×10^?5–4.0×10^?2, 2.2×10^?5–4.0×10^?2, and 1.9×10^?4–4.0×10^?2 M for electrodes composed with the ionophores I–V , respectively. All electrodes showed pH range of about 4.0 to 11.5 and working temperature range of 22 to 70 °C with isothermal temperature coefficients of 1.19×10^?3, 1.16×10^?3, 1.16×10^?3, 1.00×10^?3 , and 1.32×10^?3 V/°C for electrodes I–V respectively.     

Rate constants for the reactions of Br atoms with a series of alkanes,alkenes, and alkynes in the presence of O2

Rate constants of Br atom reactions have been determined using a relative kinetic method in a 20 l reaction chamber at total pressures between 25 and 760 torr in N₂ + O₂ diluent over the temperature range 293–355 K. The measured rate constants for the reactions with alkynes and alkenes showed dependence upon temperature, total pressure, and the concentration of O₂ present in the reaction system. Values of (6.8 ± 1.4) × 10^?15, (3.6 ± 0.7) × 10^?14, (1.5 ± 0.3) × 10^?12, (1.6 ± 0.3) × 10^?13, (2.7 ± 0.5) × 10^?12, (3.4 ± 0.7) × 10^?12, and (7.5 ± 1.5) × 10^?12 (units: cm³ s^?1) have been obtained as rate constants for the reactions of Br with 2,2,4-trimethylpentane, acetylene, propyne, ethene, propene, 1-butene, and trans-2-butene, respectively, in 760 torr of synthetic air at 298 K with respect to acetaldehyde as reference, k = 3.6 × 10^?12 cm³ s^?1. Formyl bromide and glyoxal were observed as primary products in the reaction of Br with acetylene in air which further react to form CO, HBr, HOBr, and H₂O₂. Bromoacetaldehyde was observed as an primary product in the reaction of Br with ethene. Other observed products included CO, CO₂, HBr, HOBr, BrCHO, bromoethanol, and probably bromoacetic acid.     

Inhibition of Emulsin by D-Gluconhydroximo-1,5-lactone and Related Compounds

At pH 4.5 (citrate buffer), D -gluconhydroximo-lactone ( 2 ), the N-methylurethane 3 and the N-phenylurethane 4 inhibit competitively the hydrolysis of p-nitrophenyl β-D -glucopyranoside by emulsin. The IC₅₀ values of 2, 3 , and 4 were 1.6 × 10^?4, 1.0 × 10^?4, and 5.8 × 10^?6 M , respectively. The K_i values of 2 and 4 were 9.8 × 10^?5 and 2.3 × 10^?6 M , respectively, while D-glucono-1,5-lactone ( 1 ) showed IC₅₀ = 1.1 × 10^?4 M and K_i = 3.7 × 10^?5 M .     

Kinetic studies on the metal(II) tartarate–peroxomonosulfate reaction

The kinetics of oxidation of tartaric acid (TAR) by peroxomonosulfate (PMS) in the presence of Cu(II) and Ni(II) ions was studied in the pH range 4.05–5.20 and also in alkaline medium (pH ～12.7). The rate was calculated by measuring the [PMS] at various time intervals. The metal ions concentration range used in the kinetic studies was 2.50 × 10^?5 to 1.00 × 10^?4 M [Cu(II)], 2.50 × 10^?4 to 2.00 × 10^?3M [Ni(II)], 0.05 to 0.10 M [TAR], and µ = 0.15 M. The metal(II) tartarates, not TAR/tartarate, are oxidized by PMS. The oxidation of copper(II) tartarate at the acidic pH shows an appreciable induction period, usually 30–60 min, as in classical autocatalysis reaction. The induction period in nickel(II) tartarate is small. Analysis of the [PMS]–time profile shows that the reactions proceed through autocatalysis. In alkaline medium, the Cu(II) tartarate–PMS reaction involves autocatalysis whereas Ni(II) tartarate obeys simple first‐order kinetics with respect to [PMS]. The calculated rate constants for the initial oxidation (k₁) and catalyzed oxidation (k₂) at [TAR] = 0.05 M, pH 4.05, and 31°C are Cu(II) (1.00 × 10^?4 M): k₁ = 4.12 × 10^?6 s^?1, k₂ = 7.76 × 10^?1 M^?1s^?1 and Ni(II) (1.00 × 10^?3 M): k₁ = 5.80 × 10^?5 s^?1, k₂ = 8.11 × 10^?2 M^?1 s^?1. The results suggest that the initial reaction is the oxidative decarboxylation of the tartarate to an aldehyde. The aldehyde intermediate may react with the alpha hydroxyl group of the tartarate to give a hemi acetal, which may be responsible for the autocatalysis. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 620–630, 2011     

Kinetics of the reactions of acenaphthene and acenaphthylene and structurally-related aromatic compounds with OH and NO3 radicals,N2O5 and O3 at 296 ± 2 K

The kinetics of the atmospherically important gas-phase reactions of acenaphthene and acenaphthylene with OH and NO₃ radicals, O₃ and N₂O₅ have been investigated at 296 ± 2 K. In addition, rate constants have been determined for the reactions of OH and NO₃ radicals with tetralin and styrene, and for the reactions of NO₃ radicals and/or N₂O₅ with naphthalene, 1- and 2-methylnaphthalene, 2,3-dimethylnaphthalene, toluene, toluene-α,α,α-d₃ and toluene-d₈. The rate constants obtained (in cm³ molecule^?1 s^?1 units) at 296 ± 2 K were: for the reactions of O₃; acenaphthene, <5 × 10^?19 and acenaphthylene, ca. 5.5 × 10^?16; for the OH radical reactions (determined using a relative rate method); acenaphthene, (1.03 ± 0.13) × 10^?10; acenaphthylene, (1.10 ± 0.11) × 10^?10; tetralin, (3.43 ± 0.06) × 10^?11 and styrene, (5.87 ± 0.15) × 10^?11; for the reactions of NO₃ (also determined using a relative rate method); acenaphthene, (4.6 ± 2.6) × 10^?13; acenaphthylene, (5.4 ± 0.8) × 10^?12; tetralin, (8.6 ± 1.3) × 10^?15; styrene, (1.51 ± 0.20) × 10^?13; toluene, (7.8 ± 1.5) × 10^?17; toluene-α,α,α-d₃, (3.8 ± 0.9) × 10^?17 and toluene-d₈, (3.4 ± 1.9) × 10^?17. The aromatic compounds which were observed to react with N₂O₅ and the rate constants derived were (in cm³ molecule^?1 s^?1 units): acenaphthene, 5.5 × 10^?17; naphthalene, 1.1 × 10^?17; 1-methylnaphthalene, 2.3 × 10^?17; 2-methylnaphthalene, 3.6 × 10^?17 and 2,3-dimethylnaphthalene, 5.3 × 10^?17. These data for naphthylene and the alkylnaphthalenes are in good agreement with our previous absolute and relative N₂O₅ reaction rate constants, and show that the NO₃ radical reactions with aromatic compounds proceed by overall H-atom abstraction from substituent-XH bonds (where X = C or O), or by NO₃ radical addition to unsaturated substituent groups while the N₂O₅ reactions only occur for aromatic compounds containing two or more fused six-membered aromatic rings.     

A laser flash photolysis/IR diode laser absorption study of the reaction of chlorine atoms with selected alkanes

A high‐resolution IR diode laser in conjunction with a Herriot multiple reflection flow‐cell has been used to directly determine the rate coefficients for simple alkanes with Cl atoms at room temperature (298 K). The following results were obtained: k(Cl + n‐butane) = (1.91 ± 0.10) × 10^?10 cm³ molecule^?1 s^?1, k(Cl + n‐pentane) = (2.46 ± 0.12) × 10^?10 cm³ molecule^?1 s^?1, k(Cl + iso‐pentane) = (1.94 ± 0.10) × 10^?10 cm³ molecule^?1 s^?1, k(Cl + neopentane) = (1.01 ± 0.05) × 10^?10 cm³ molecule^?1 s^?1, k(Cl + n‐hexane) = (3.44 ± 0.17) × 10^?10 cm³ molecule^?1 s^?1 where the error limits are ±1σ. These values have been used in conjunction with our own previous measurements on Cl + ethane and literature values on Cl + propane and Cl + iso‐butane to generate a structure activity relationship (SAR) for Cl atom abstraction reactions based on direct measurements. The resulting best fit parameters are k_p = (2.61 ± 0.12) × 10^?11 cm³ molecule^?1 s^?1, k_s = (8.40 ± 0.60) × 10^?11 cm³ molecule^?1 s^?1, k_t = (5.90 ± 0.30) × 10^?11 cm³ molecule^?1 s^?1, with f( ? CH₂^? ) = f (? CH₂^? ) = f (?C?) = f = 0.85 ± 0.06. Tests were carried out to investigate the potential interference from production of excited state HCl(v = 1) in the Cl + alkane reactions. There is some evidence for HCl(v = 1) production in the reaction of Cl with shape n‐hexane. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 34: 86–94, 2002     

Kinetic studies of the reactions of pentacyanoferrate(III) complexes with L‐ascorbic acid

The reduction of Fe(CN)₅L^2? (L = pyridine, isonicotinamide, 4,4′‐bipyridine) complexes by ascorbic acid has been subjected to a detailed kinetic study in the range of pH 1–7.5. The rate law of the reaction is interpreted as a rate determining reaction between Fe(III) complexes and the ascorbic acid in the form of H₂A(k₀), HA^?(k₁), and A^2? (k₂), depending on the pH of the solution, followed by a rapid scavenge of the ascorbic acid radicals by Fe(III) complex. With given Ka₁ and Ka₂, the rate constants are k₀ = 1.8, 7.0, and 4.4 M^?1 s^?1; k₁ = 2.4 × 10³, 5.8 × 10³, and 5.3 × 10³ M^?1 s^?1; k₂ = 6.5 × 10⁸, 8.8 × 10⁸, and 7.9 × 10⁸ M^?1 s^?1 for L = py, isn, and bpy, respectively, at μ = 0.10 M HClO₄/LiClO₄, T = 25°C. The kinetic results are compatible with the Marcus prediction. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 37: 126–133, 2005     

Photocurrent kinetics at the electron emission from a metal into electrolyte solution: Part II. Solutions without acceptors and solutions of N2O,NO2−, NO3−

A method of measuring the kinetics of currents arising at the electron photoemission from a metal into electrolyte solution when affected by the u.v. laser pulses for 10^?8 s at the frequency of repetitions 10–25 Hz is described. Measurements have been taken in solutions without acceptors and in those containing N₂O and NO₂^?, NO₃^? ions as electron acceptors. The rate constants of capture of the solvated electrons by N₂O ((6±1)×0⁹ mol^?1 s^?1) and NO₂^? ((4.5±1)×10⁹ mol^?1 s^?1) and the diffusion coefficients of OH-radicals ((1.0±0.3)×10^?5 cm² s^?1) and of NO ((1.2±0.3)×10^?5 cm² s^?1) are found. The oxidation rate of NO₃^2? has been shown to decrease from 40 cm s^?1 in the range of potentials ?0.55 to ?1.0 V. The rate constant of bimolecular recombination of the solvated electrons ((1.3±0.4)×10¹⁰ mol^?1 s^?1) has been found from the dependence of the emitted charge on the light intensity.     

Interaction of poly(vinyl acetate) radical with iron (III) complexes

The polymerization of vinyl acetate in N,N-dimethylformamide (DMF) at 60°C initiated by AIBN in the presence of [Fe(DMF)₆](ClO₄)₃ and Fe(N₃)₃ had been studied. Fe(N₃)₃ was produced in situ by mixing solid sodium azide (NaN₃) and hexakis(N,N-dimethylformamide) iron (III) perchlorate, [Fe(DMF)₆](ClO₄)₃, in the ratio of 3:1. The velocity constant k_x for the interaction of poly(vinyl acetate) radical with [Fe(DMF)₆]³⁺ was found to be 1.44 × 10³L mol^?1 s^?1 and that for the interaction of poly(vinyl acetate) radical with Fe(N₃)₃ to be 3.44 × 10⁵ L mol^?1 s^?1 at 60°C.     

Hydroxyl radical reactions with halogenated ethanols in aqueous solution: Kinetics and thermochemistry

Laser flash photolysis combined with competition kinetics with SCN^? as the reference substance has been used to determine the rate constants of OH radicals with three fluorinated and three chlorinated ethanols in water as a function of temperature. The following Arrhenius expressions have been obtained for the reactions of OH radicals with (1) 2‐fluoroethanol, k₁(T) = (5.7 ± 0.8) × 10¹¹ exp((?2047 ± 1202)/T) M^?1 s^?1, (2) 2,2‐difluoroethanol, k₂(T) = (4.5 ± 0.5) × 10⁹ exp((?855 ± 796)/T) M^?1 s^?1, (3) 2,2,2‐trifluoroethanol, k₃(T) = (2.0 ± 0.1) × 10¹¹ exp((?2400 ± 790)/T) M^?1 s^?1, (4) 2‐chloroethanol, k₄(T) = (3.0 ± 0.2) × 10¹⁰ exp((?1067 ± 440)/T) M^?1 s^?1, (5) 2, 2‐dichloroethanol, k₅(T) = (2.1 ± 0.2) × 10¹⁰ exp((?1179 ± 517)/T) M^?1 s^?1, and (6) 2,2,2‐trichloroethanol, k₆(T) = (1.6 ± 0.1) × 10¹⁰ exp((?1237 ± 550)/T) M^?1 s^?1. All experiments were carried out at temperatures between 288 and 328 K and at pH = 5.5–6.5. This set of compounds has been chosen for a detailed study because of their possible environmental impact as alternatives to chlorofluorocarbon and hydrogen‐containing chlorofluorocarbon compounds in the case of the fluorinated alcohols and due to the demonstrated toxicity when chlorinated alcohols are considered. The observed rate constants and derived activation energies of the reactions are correlated with the corresponding bond dissociation energy (BDE) and ionization potential (IP), where the BDEs and IPs of the chlorinated ethanols have been calculated using quantum mechanical calculations. The errors stated in this study are statistical errors for a confidence interval of 95%. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 174–188, 2008     

Kinetics of the gas‐phase reactions of chlorine atoms with CH2F2, CH3CCl3, and CF3CFH2 over the temperature range 253–553 K

Relative rate techniques were used to study the title reactions in 930–1200 mbar of N₂ diluent. The reaction rate coefficients measured in the present work are summarized by the expressions k(Cl + CH₂F₂) = 1.19 × 10^?17 T² exp(?1023/T) cm³ molecule^?1 s^?1 (253–553 K), k(Cl + CH₃CCl₃) = 2.41 × 10^?12 exp(?1630/T) cm³ molecule^?1 s^?1 (253–313 K), and k(Cl + CF₃CFH₂) = 1.27 × 10^?12 exp(?2019/T) cm³ molecule^?1 s^?1 (253–313 K). Results are discussed with respect to the literature data. © 2009 Wiley Periodicals, Inc. Int J Chem Kinet 41: 401–406, 2009     

Rate constants for the elementary reactions between CN radicals and CH4, C2H6, C2H4, C3H6, and C2H2 in the range: 295 ⩽ T/K ⩽ 700

Pulsed laser photolysis, time-resolved laser-induced fluorescence experiments have been carried out on the reactions of CN radicals with CH₄, C₂H₆, C₂H₄, C₃H₆, and C₂H₂. They have yielded rate constants for these five reactions at temperatures between 295 and 700 K. The data for the reactions with methane and ethane have been combined with other recent results and fitted to modified Arrhenius expressions, k(T) = A′(298) (T/298)ⁿ exp(?θ/T), yielding: for CH₄, A′(298) = 7.0 × 10^?13 cm³ molecule^?1 s^?1, n = 2.3, and θ = ?16 K; and for C₂H₆, A′(298) = 5.6 × 10^?12 cm³ molecule^?1 s^?1, n = 1.8, and θ = ?500 K. The rate constants for the reactions with C₂H₄, C₃H₆, and C₂H₂ all decrease monotonically with temperature and have been fitted to expressions of the form, k(T) = k(298) (T/298)ⁿ with k(298) = 2.5 × 10^?10 cm³ molecule^?1 s^?1, n = ?0.24 for CN + C₂H₄; k(298) = 3.4 × 10^?10 cm³ molecule^?1 s^?1, n = ?0.19 for CN + C₃H₆; and k(298) = 2.9 × 10^?10 cm³ molecule^?1 s^?1, n = ?0.53 for CN + C₂H₂. These reactions almost certainly proceed via addition-elimination yielding an unsaturated cyanide and an H-atom. Our kinetic results for reactions of CN are compared with those for reactions of the same hydrocarbons with other simple free radical species. © John Wiley & Sons, Inc.     

Studies on some radical transfer reactions by entrapping the radicals as polymer end groups. I. Reaction of hydroxyl radicals with amines

The reaction of OH radicals with a number of amines has been studied by entrapping the resultant radicals as polymer end groups which have been detected and estimated by the sensitive dye partition technique. Expressions have been developed relating the average amounts of end groups per polymer molecule to the rate constant of the radical transfer reaction, the rate constants determined for reaction with n-butyl, n-hexyl, and n-octyl amine being 1.00 × 10¹⁰, 1.31 × 10¹⁰, and 1.46 × 10¹⁰ mol^?1 L s^?1, respectively, at 25°C. The order of reactivity for amines of different classes has been found to be as primary < secondary > tertiary, the rate constants for reaction with n-butyl, dibutyl, and tributyl amine being 1.00 × 10¹⁰, 1.81 × 10¹⁰, and 1.67 × 10¹⁰ mol^?1 L s^?1, respectively, at 25°C. The change in the reactivity of the amine with chain length and amine class has been explained by activation and deactivation of the CH₂ group from which H abstraction by OH radicals occurs, respectively, by the alkyl group and by the protonated amino nitrogen under the acidic condition of the medium. Between pH 1.00 and 2.17, the rate of the reaction with n-butyl amine remains practically unchanged, but from pH 2.20 to 2.72 the rate constant increases with increasing pH, indicating that deprotonation of the positively charged nitrogen starts at about pH 2.20. The method is simple and accurate and can be applied to detect and estimate very reactive radicals.     

Organocobalt chelates as initiators of emulsion polymerization of styrene

The kinetics of decomposition of organocobalt chelates in the pH range of 2.2–7.0 has been studied. It has been shown that the rate constant of decomposition of the octyl chelate complex at 20°C changes from ～3 × 10^?3 to ～6 × 10^?6 s^?1 in the above pH range. The rate constants of decomposition of complexes with ethyl, octyl, and cetyl ligands, as estimated at 20°C and pH 8.3, are 1.69 × 10^?4, 1.39 × 10^?4, and 2.42 × 10^?5 s^?1, respectively. As evidenced by emission spectrometry measurements, ～100% of organocobalt chelates with ethyl and isopropyl ligands occur in the aqueous phase, while organocobalt chelates with octyl and cetyl ligands are partitioned between monomer and aqueous phases. The rates of initiation of the emulsion polymerization of styrene have been measured by the inhibited polymerization procedure. It has been demonstrated that among three tested compounds (diphenyl picryl hydrazyl, hydroquinone, and benzoquinone), benzoquinone has been found to be a suitable inhibitor for the polymerization under study. The rates of initiation of styrene polymerization at 30°C for organocobalts with ethyl, octyl, and cyclohexyl ligands are 1.0 × 10^?7, 1.04 × 10^?7, and 3.7 × 10^?6 mol/(l s), respectively. The rate constant of decomposition of the organocobalt complex with the octyl ligand at 30°C is 2.28 × 10^?5 s^?1, and the efficiency of initiation with this complex is 0.95.     

A study of the reaction NO3 + NO2 + M → N2O5 + M(M = N2, O2)

The gas-phase reaction of the NO₃ radical with NO₂ was investigated, using a flash photolysis-visible absorption technique, over the total pressure range 25–400 Torr of nitrogen or oxygen diluent at 298 ± 2 K. The absolute rate constants determined (in units of 10^?13 cm³ molecule^?1 s^?1) at 25, 100, and 400 Torr total pressure were, respectively, (4.0 ± 0.5), (7.0 ± 0.7), and (10 ± 2) for M = N₂ and (4.5 ± 0.5), (8.0 ± 0.4), and (8.8 ± 2.0) for M = O₂. These data show that the third-body efficiencies of N₂ and O₂ are identical, within the error limits, and that previous evaluations for M = N₂ are applicable to the atmosphere. In addition, upper limits were determined for the rate constants of the reactions of the NO₃ radical with methanol, ethanol, and propan-2-ol of ?6 × 10^?16, ?9 × 10^?16, and ?2.3 × 10^?15 cm³ molecule^?1 s^?1, respectively, at 298 ± 2 K.     

Kinetics and simulations of reaction between safranine‐O and acidic bromate and role of bromide therein

Safranine‐O, a dye of the phenazinium class, was found to exhibit intricate kinetics during its reaction with bromate at low pH conditions. Under conditions of excess concentrations of acid and bromate, safranine‐O (SA⁺) initially depleted very slowly (k = (3.9 ± 0.3) × 10^?4 M^?3 s^?1) but after an induction time, the reaction occurred swiftly. Bromide exhibited a dual role in the reaction mechanism, both as an autocatalyst and as an inhibitor. The added bromide increased the initial rate of depletion of SA⁺, but delayed the transition to rapid reaction. The overall stiochiometric reaction was found to be 6SA⁺ + 4 BrO₃ ^? = 6SP + 3N₂O + 3H₂O + 6H⁺ + 4Br^?, where SP is 3‐amino‐7‐oxo‐2,8‐dimethyl‐5‐phenylphenazine. The fast kinetics of the reaction between aqueous bromine and safranine‐O (k = (2.2 ± 0.1) × 10³ M^?1 s^?1) are also reported in this paper A 17‐step mechanism, consistent with the overall reaction dynamics and supported by simulations, is proposed and the role of various bromo and oxybromo species is also discussed. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 542–549, 2002     

Sensitive amperometric pyridoxine sensor based on self‐assembled Prussian blue nanoparticle‐modified poly(o‐phenylenediamine)/glassy carbon electrode

Prussian blue nanoparticles (PBNPs) were prepared by a self‐assembly process on a glassy carbon electrode (GCE) modified with poly(o‐phenylenediamine) (PoPD) film. The stepwise fabrication process of PBNP‐modified PoPD/GCE was characterized using scanning electron microscopy and electrochemical impedance spectroscopy. The prepared PBNPs showed an average size of 70 nm and a homogeneous distribution on the surface of the modified electrode. The PBNPs/PoPD/GCE showed electrocatalytic activity towards the oxidation of pyridoxine (PN) and was used as an amperometric sensor. The modified electrode exhibited a linear response for PN oxidation over the concentration range 3–38.5 μM with a detection limit of ca 6.10 × 10^?7 M (S/N = 3) and sensitivity of 2.79936 × 10³ mA M^?1 cm^?2 using an amperometric method. The mechanism and kinetics of the catalytic oxidation reaction of PN were investigated using cyclic voltammetry and chronoamperometry. The values of α, k_cat and D were estimated as 0.36, 1.089 × 10² M^?1 s^?1 and 8.9 × 10^?5 cm² s^?1, respectively. This sensor also exhibited good anti‐interference and selectivity. Copyright © 2016 John Wiley & Sons, Ltd.