Novel synthesis of polyimide with pendant 1-phenylethyl ester using DBU and its thermal acid-catalyzed deesterification

A model reaction of o-(N-phenylcarbamoyl)benzoic acid (amic acid) with threefold amounts of 1-phenylethyl bromide (PEB) and 1,8-diazabicyclo-[5,4,0]-7-undecene (DBU) was carried out in NMP. The reaction gave N-[m-(1-phenylethoxycarbonyl)phenyl]phthalimide in almost quantitative yield at room temperature for 2 h. Polyimide containing pendant 1-phenylethyl ester (P-1a) was also prepared from polyamic acid with PEB using DBU according to the model reaction. The obtained polymer was exactly consistent with P-1a synthesized stepwise from the esterification of the corresponding polyimide containing pendant carboxylic acid with PEB. Therefore, the reaction of polyamic acid bearing pendant carboxylic acid with alkyl bromide proceeded quantitatively to give polyimide containing pendant ester in the presence of DBU. Also, this method was applied to the synthesis of polyimide containing 1-phenylethyl ether. However, the polyimide with quantitative etherification was not synthesized. The acid-catalyzed deesterification of P-1a film was carried out by heating the irradiated polymer film containing 10 wt % of p-nitrobenzyl 9,10-diethoxyanthracene-2-sulfonate, which produced sulfonic acid by irradiation, at various temperatures. Although thermal deesterification of P-1a started at 220°C without any acid catalyst, the deesterification occurred when the irradiated film was heated at the lower temperature. The degree of esterification can be determined from the disappearance of absorption at 700 cm⁻¹. The deesterification obeyed first-order kinetics. © 1996 John Wiley & Sons, Inc.     

Study of photopolymer. XVII. Synthesis of novel photosensitive polymers with pendant photosensitive group and photosensitizer groups

Novel photosensitive polymers with pendant photosensitive group, such as cinnamic ester, and photosensitizer groups, such as N-carbamoyl-p-nitroaniline and N-carbamoly-4-nitro-1-naphthylamine, were synthesized from radical copolymerizations of (2-cinnamoyloxy)ethylmethacrylate with photosensitizer monomers, such as p-nitrophenylmethacrylamide and 4-nitro-1-na-phthylmethacrylamide, by using asobisisobutyronitrile (AIBN) in benzene and from the copolymerizations of (2-hydroxy)ethylmethacrylate or (2-hydroxy)ethylacrylate with photosensitizer monomers by using AIBN in DMF. This procedure was followed by condensation reactions of the copolymers with cinnamoyl chloride with pyridine as HCL acceptor in the same reaction flask. The photoreactivities of the polymers obtained were influenced by the concentration of photosensitive group and photosensitizer groups and their ratio in the polymer matrix. In addition, the photosensitivity of cinnamic ester groups attached to a soft polymer segment was higher than that of cinnamic ester group attached to a hard polymer segment when these polymers had the same pendant N-carbamoyl-p-nitroaniline group as photosensitizer. Furthermore, the spacer length between the polymer chain and photosensitizer group was important for increasing the photoreactivity of the photosensitive group in the polymers with pendant cinnamic ester and N-carbamoyl-p-nitroaniline groups.     

Versatile functionalization of aromatic polysulfones via thiol‐ene click chemistry

A facile, efficient approach for preparation of functionalized aromatic polysulfones by postpolymerization modification with thiol‐ene click chemistry is described. The key synthetic strategy is to incorporate a pendant vinyl ether group into polysulfones as a reactive precursor with controlled degrees of functionalization. Synthetic utility of the pendant alkenyl group is demonstrated by generating diverse polymer derivatives using thiol‐ene functionalization including glycosylated polysulfone. The highly reactive alkene platform in the polymer affords convenient, metal‐free, and azide‐free click transformations to create diverse ranges of new functionalized polysulfones that could be applied in various applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3237–3243     

Kinetic study of the crosslinking reaction of 1,2‐polybutadiene with dicumyl peroxide in the absence and presence of vinyl acetate

The crosslinking reaction of 1,2-polybutadiene (1,2-PB) with dicumyl peroxide (DCPO) in dioxane was kinetically studied by means of Fourier transform near-infrared spectroscopy (FTNIR). The crosslinking reaction was followed in situ by the monitoring of the disappearance of the pendant vinyl group of 1,2-PB with FTNIR. The initial disappearance rate (R₀) of the vinyl group was expressed by R₀ = k[DCPO]^0.8[vinyl group]^−0.2 (120 °C). The overall activation energy of the reaction was estimated to be 38.3 kcal/mol. The unusual rate equation was explained in terms of the polymerization of the pendant vinyl group as an allyl monomer involving degradative chain transfer to the monomer. The reaction mixture involved electron spin resonance (ESR)-observable polymer radicals, of which the concentration rapidly increased with time owing to a progress of crosslinking after an induction period of 200 min. The crosslinking reaction of 1,2-PB with DCPO was also examined in the presence of vinyl acetate (VAc), which was regarded as a copolymerization of the vinyl group with VAc. The vinyl group of 1,2-PB was found to show a reactivity much higher than 1-octene and 3-methyl-1-hexene as model compounds in the copolymerization with VAc. This unexpectedly high reactivity of the vinyl group suggested that an intramolecular polymerization process proceeds between the pendant vinyl groups located on the same polymer chain, possibly leading to the formation of block-like polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4437–4447, 2004     

Synthesis and photochemical properties of solar energy storage-exchange polymers containing pendant norbornadiene moieties

New photoresponsive polymers 1–4 containing pendant norbornadiene (NBD) moieties with N,N-disubstituted amide groups were synthesized with 97, 98, 92, and 94% conversions by the substitution reaction of poly (p-chloromethyl) styrene] with potassium salts of 3piperidyloxo-2,5-NBD-2-carboxylic acid, 3-(NN-dipropylcarbamoyl) -2,5-NBD-2-carboxylic acid, 3-(N-methyl-N-phenylcarbamoyl)-2,5-NBD-2-carboxylic acid, and 3-(N,N-dipheylcarbmoyl)-2,5-NBD-2-carboxylic acid, respectively, using tetrabutylammonium bromide as a phase transfer catalyst for all. Polymers 1–4 with N,N-disubstituted amide groups on the NBD moieties were sensitized by adding appropriate photosensitizers such as Michler's ketone and 4- (N,N-dimethylamino) benzophenone in the film state, although the reactivities of the polymers without photosensitizer were lower than that of our previously reported polymer 5 containing pendant 3- (N-phenylcarbamoyl) -2,5-NBD-2-carboxylate moiety. It was also found that the photo-irradiated retaining polymers 1–4 containing the corresponding QC moieties can be stored about 80–86 kJ/mol of their thermal energy. © 1994 John Wiley & Sons, Inc.     

Synthesis and Evaluation of Thiol Polymers

Thiol polymer, which is known as a reactive and functional polymer, is synthesized and evaluated quantitatively by the modified Ellman method. The synthesis was accomplished by 1) hydrolysis of an isothiouronium salt that is the adduct of 4‐chloromethylstyrene (CMS) homopolymer or CMS‐styrene (St) copolymer with thiourea; 2) hydrolysis of a precursor copolymer made from 4‐vinylbenzyl N‐ethyldithio‐carbamate (VBEC) and St or N‐vinyl‐2‐pyrrolidone (NVP); 3) solvolysis of an iminium salt polymer obtained from the reaction of CMS‐NVP copolymer with N,N‐dimethylthioformamide (TDMF). When a higher thiol content is desired, more severe hydrolysis conditions are required which however, also increase the loss of thiol. Hence, it is clear that the best synthesis of thiol polymers is Method 3. A quantitative yield of functional thiol polymer is obtained by this method, and the product is soluble in DMSO, DMF, and CHCI_3.     

Synthesis of functional polymers bearing cyclic carbonate groups from (2-oxo-1,3-dioxolan-4-yl) methyl vinyl ether

(2-Oxo-1,3-dioxolan-4-yl) methyl vinyl ether (OVE) was synthesized with high yield by addition reaction of glycidyl vinyl ether with carbon dioxide using tetrabutylammonium bromide (TBAB) as a catalyst. OVE was also prepared by reaction with β-butyrolactone or sodium hydrogencarbonate in the presence of TBAB as the catalyst. Poly [(2-oxo-1,3-dioxolan-4-yl) methyl vinyl ether] [P(OVE)] was obtained with high yield by cationic polymerization of OVE catalyzed using boron trifluoride diethyl ether complex in dichloromethane. Polymers bearing pendant 5-membered cyclic carbonate groups were also prepared by radical copolymerization of OVE with some electron-accepting monomers. Furthermore, addition reaction of P(OVE) with alkyl amines yielded the corresponding polymer having pendant 2-hydroxyethyl carbamate residue with high conversions. © 1994 John Wiley & Sons, Inc.     

Kinetics of photocrosslinking reactions of a DCPA/EA matrix in the presence of thiols and acrylates

The crosslinking efficiency and kinetics of a solid acrylic copolymer DCPA/EA (dicyclopentenyl acrylate/ethyl acrylate) matrix were investigated in the presence of pentaerythritol tetrakis (2-mercaptoacetate) (PETMP) or pentaerythritol tri- and tetraacrylates used as multifunctional crosslinking agents. The reaction of thiol and acrylate addition was sensitized by benzophenone (BP). The crosslinking efficiency of the DCPA/EA—BP—PETMP copolymer system, illuminated at high wavelengths (λ > 310 nm), was compared with that of the DCPA/EA matrix alone and the 2-component system copolymer DCPA/EA–BP. The concentrations of photosensitizer and crosslinking agent were varied from 1 to 10 mass %. The kinetics of tetrafunctional thiol addition and cyclopentene (pendant group of the DCPA/EA matrix) disappearance was followed through Fourier transform infrared (FTIR) and by determining the gel content. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2333–2345, 1997     

Synthesis and optical properties of polyethylenimine containing L-proline and optically active thymine derivatives

Preparation and optical properties of linear polyethylenimine (PEI) containing L -(?)-N-[(?)-2-(thymin-1-yl) propionyl] prolyl group as grafting pendant, [P-(?)Pro-(?)T], and its related monomer and dimer model compounds are described. Hypochromic effects and circular dichroism of these compounds were compared with those of PEI containing (?)-2-(thymin-1-yl) propionyl group as grafting pendant, [P-(?)T], which has no L -proline ring as a spacing group. P-(?)Pro-(?)T showed no exciton coupling of B_2u π-π^* transition although it showed large hypochromicity in neutral aqueous solution, implying that the stacking of the bases has no screw sense.     

New thermo-crosslinking reactions of polymers containing pendant epoxide groups with various polyfunctional active esters

New thermo-crosslinking reactions of poly(glycidyl methacrylate), copolymers of glycidyl methacrylate with methyl methacrylate, styrene or ethyl acrlate with various active esters such as di[S-(2-benzothiazoly)] thioadipate (BTAD), di(S-phenyl) thioadipate (PTAD), di(4-nitrophenyl) adipate (NPAD), diphenyl adipate (PAD), and di(S-phenyl) thioisophthalate (PTIP), and other polyfunctional esters were carried out in the film state using various catalysts such as quarternary ammonium or phosphonium salts, tert amines, or the crown ether 18-crown-6 = potassium salts system. Addition reactions of pendant epoxide groups in the polymer with the active esters such as NPAD and PTAD proceeded selectively to give gel compounds without other side reactions. The rates of reaction with the thioesters such as BTAD and PTAD were relatively faster than those with the phenyl esters such as PAD and NPAD at 70°C. The rates of reactions with the esters having flexible segments such as PTAD were also faster than those with the esters having rigid skeletons such as PTIP. Furthermore, it was found that the rate of reaction was affected strongly by reaction temperature, catalyst concentration, length of alkyl chain in the catalyst, kind of counterion of quarternary ammonium salts as a catalyst, content of pendant epoxide groups in the polymer, and kind of copolymer unit in the polymer, respectively.     

Cope elimination and complexation of poly(dimethylaminoethyl methacrylate N-oxide)

Poly(dimethylaminoethyl methacrylate N-oxide) (poly(DMAEMNO)) was prepared by oxidation of poly(dimethylaminoethyl methacrylate) with hydrogen peroxide in methanol. From thermogravimetric and IR spectroscopic investigations Cope elimination of amine oxide group in poly(DMAENO) was found to occur at 120–150°C. The postpolymerization of partially pyrolyzed polymer carrying vinyl ester group as pendant was performed with azobisisobutyronitrile at 60°C in methanol to give cross-linked polymer that was found to form hydrogel. Poly(DMAEMNO) gave metal–polymer complexes with CuCl₂, ZnCl₂, and CoCl₂. Cobalt–polymer complex had a constitution of 1:2 of metal ion to amine oxide group, while copper– and zinc–polymer complexes seemed to have structures of 1:1 and 1:2 of metal ion to amine oxide group. Furthermore, polymer complexes of poly(DMAEMNO) with poly(methacrylic acid) and poly(acrylic acid) were found to be formed by mixing aqueous solutions of both polymers and also by radical polymerization of the acid monomers in the presence of poly(DMAEMNO). From elemental analysis, thermogravimetric investigation, and measurement of turbidity it was concluded that the resulting polymer–polymer complexes contained more than one acid monomer unit per one N-oxide unit.     

Thiol‐Ene Cationic and Radical Reactions: Cyclization,Step‐Growth,and Concurrent Polymerizations for Thioacetal and Thioether Units

Thiol‐ene cationic and radical reactions were conducted for 1:1 addition between a thiol and vinyl ether, and also for cyclization and step‐growth polymerization between a dithiol and divinyl ether. p‐Toluenesulfonic acid (PTSA) induced a cationic thiol‐ene reaction to generate a thioacetal in high yield, whereas 2,2′‐azobisisobutyronitrile resulted in a radical thiol‐ene reaction to give a thioether, also in high yield. The cationic and radical addition reactions between a dithiol and divinyl ether with oxyethylene units yielded amorphous poly(thioacetal)s and crystalline poly(thioether)s, respectively. Under high‐dilution conditions, the cationic and radical reactions resulted in 16‐ and 18‐membered cyclic thioacetal and thioether products, respectively. Furthermore, concurrent cationic and radical step‐growth polymerizations were realized using PTSA under UV irradiation to produce polymers having both thioacetal and thioether linkages in the main chain.     

Kinetic analyses of disulfide formation between thiol groups attached to linear poly(acrylamide)

Kinetic analyses were carried out for formation of disulfide crosslinkages between thiol groups on linear polymers, poly(acrylamide‐co‐N‐acrylcysteamine) (P‐SH). Disulfide crosslinkages were formed by auto‐oxidation of pendant thiol groups or through the thiol‐disulfide exchange reaction induced by addition of disulfide compounds gluthathione. In the auto‐oxidation reaction, the rate constant for disulfide formation highly depended on pH values of the reaction mixtures and the P‐SH concentrations. Gelation rate is too slow to enclose living cells into hydrogel under physiological pH 7.4. The hydrogel formation rate can be accelerated by addition of disulfides, such as oxidized glutathione. In the later case, oxygen in the reaction mixture is not consumed. The thiol‐disulfide exchange reaction is much more suitable for the cell encapsulation than the thiol auto‐oxidation reaction. These findings give a basis for enclosure of living cells in a hydrogel. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Thiol‐Ene Step‐Growth as a Versatile Route to Functional Polymers

A new use of the thiol‐ene reaction to generate functional, redox‐tunable polymers is described. To illustrate the versatility of this approach, tailored divinyl ether monomers were polymerized with triethylene glycol dithiol to yield polymers containing either a carbonate or zwitterionic phosphocholine within the polymer backbone. Similarly, dithioerythritol was polymerized with triethylene glycol divinyl ether to yield a polymer with pendant diols and show how functional groups can be designed into either the divinyl ether or dithiol monomer. Using the thioether functional group inherent to this polymerization, all three polymers were selectively and quantitatively oxidized to either sulfoxides or sulfones by treatment with dilute hydrogen peroxide or mCPBA, respectively. With these illustrative examples, it is shown that the thiol‐ene polymerization is a broad‐reaching method to access a class of new redox‐active polymers which contain varied and dense functional‐group compositions.     

Oxoaminium salts as initiators for cationic polymerization of vinyl monomers

Oxoaminium salt ( 1 ), derived from 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO, 2 ) by one-electron oxidation, could be an initiator for cationic polymerization of vinyl monomers such as isobutyl vinyl ether (IBVE), 2,3-dihydrofuran, p-methoxystyrene, N-vinyl pyrrolidone, etc., to give the corresponding polymers, when 1 had a low nucleophilic counter anion. Formation of the adducts of 1 and IBVE as well as ¹H-NMR and IR data suggested the formation of polymers containing N? O? C structure as the polymer head group. In the polymerization of IBVE, the effects of solvent and concentration of 1 were little observed, however the polymerization rate was dependent on temperature. Furthermore, the thermal reaction of the polymers obtained, which were regarded as prepolymers for block copolymerization and polymeric initiators for radical polymerization, was studied. For example, poly(2-benzylidene-1,3-dioxane) obtained by the polymerization of 2-benzylidene-1,3-dioxane with oxoaminium hexafluoroantimonate ( 1, X = SbF₆) was employed as an initiator for radical polymerization of MMA to give its block copolymer with PMMA. © 1993 John Wiley & Sons, Inc.     

A novel synthesis of reactive polymers with pendant halomethyl groups by the polyaddition reaction of bis(epoxide)s with bis(chloroacetoxy)esters or bis(bromoacetoxy)esters

New reactive polymers with pendant halomethyl groups were successfully synthesized by polyaddition reactions of bis(epoxide)s with bis(chloroacetoxy)ester such as 1,4-bis [(chloroacetoxy)methyl]benzene (BCAMB) or 1,4-bis[(bromoacetoxy)methyl]benzene (BBAMB) using quaternary onium salts or crown ether complexes as catalysts. The polyaddition reaction of diglycidyl ether of bisphenol A (DGEBA) with BCAMB proceeded very smoothly with high yields (83–96%) by the addition of quaternary onium salts such as tetrabutylphosphonium bromide (TBPB) or crown ether complexes such as 18-crown-6/KBr as catalysts to produce high molecular weight polymers, although the reaction occurred without any catalyst to give low molecular weight polymer in low yield at 90°C for 48 h. It was also found that the reaction proceeded smoothly in aprotic polar solvents such as N-methyl-2-pyrrolidone (NMP) and N,N-dimethylacetamide (DMAc) to produce high molecular weight polymers. Polyaddition reactions of DGEBA or digylcidyl ether of ethylene glycol (DGEEG) with BBAMB, other bis(chloroacetoxy)esters or bis(bromoacetoxy)esters using TBPB in DMAc also proceeded smoothly to give the corresponding polymers. The resulting poly(ether-ester)s contain reactive halomethyl groups as side chains, which were introduced during main chain formation. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3791–3799, 1997     

Synthesis and photochemical property of polymers with pendant donor–acceptor-type norbornadiene moieties

The donor–acceptor-type norbornadiene (D–A NBD) 1,4,5,6-tetramethyl-3-phenyl-2,5-NBD-2-carboxylic acid was prepared by the Diels–Alder reaction of methyl 3-phenylprop-2-ynoate with 1,2,3,4-tetramethyl-1,3-cyclopentadiene. 1,4,5,6,7-Pentamethyl-3-phenyl-2,5-NBD-2-carboxylic acid was also synthesized in the same way. Styrene-type polymers with pendant D–A NBD moieties were prepared with a 100% degree of substitution (DS) by the reaction of D–A NBD carboxylic acids with poly[(p-chloromethyl)styrene] with 1,8-diazabicyclo[5.4.0]undecene-7 in dimethyl sulfoxide at 70 °C for 6 h. In the reaction of D–A NBD carboxylic acids with poly(2-chloroethyl vinyl ether), the DSs were about 60%. The photochemical valence isomerizations of all the NBD polymers proceeded smoothly with UV irradiation in tetrahydrofuran solutions and in the film state. In addition, the rate of the photochemical reaction of the NBD polymers increased efficiently by the addition of 4,4′-bis(diethylamino)benzophenone as a photosensitizer in a film state. The stored thermal energy of the irradiated polymers was also evaluated by differential scanning calorimetry to be 55–74 kJ/mol. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1764–1773, 2001     

Rhodium-catalyzed synthesis of 2,3 – Disubstituted N-methoxy pyrroles and furans via [3+2] cycloaddition between metal carbenoids and activated olefins

For the first time, we report the synthesis of 2-substituted N-alkoxy pyrrole 3-carboxylate and furan 3-carboxylate via Rh-catalyzed [3+2] cycloaddition between α-diazo oxime ether or α-diazo carbonyl compounds with vinyl equivalents in a one-pot process. We have demonstrated ethyl vinyl ether as well as vinyl acetate as vinyl equivalents and both were found to give excellent yields. We have also demonstrated the synthesis of N-alkoxy dihydropyrrole derivatives by carrying out the reaction at low temperature.     

Polymerizations of substituted cyclopropanes. II. Anionic polymerization of 1,1-disubstituted 2-vinylcyclopropanes

Among the four 1,1-disubstituted 2-vinylcyclopropanes, diethyl 2-vinylcyclopropane-1,1-dicarboxylate (Ia), 2-vinylcyclopropane-1,1-dicarbonitrile (Ib), ethyl 1-cyano-2-vinylcyclopropanecarboxylate (Ic), and 1,1-diphenyl-2-vinylcyclopropane (Id), Ib and Ic polymerized well with sodium cyanide in N,N-dimethylformamide. Ib was most reactive and a polymer (IIb) from Ib exhibited an inherent viscosity of 1.05 dl/g (concentration of 1.0 g in 100 ml of 95% H₂SO₄). All experimental results indicated that the polymerization proceeded by ring opening and that the structure of the polymers had pendant vinyl groups. The polymer IIc from Ic was soluble in common solvents like acetone, but IIb was soluble only in 95% H₂SO₄. Reactions of those compounds with benzenethiolate ion in ethanol yielded addition products that supported the ring-opening polymerization of those monomers. In the postulated mechanism of polymerization cyanide ion attacks the carbon of a cyclopropane ring with electron-releasing vinyl group and the resulting anion is thereby stabilized by two electron-withdrawing substituents. The propagation takes place by the reaction of the anion with another monomer molecule.     

Photochemical property of the polymer-bearing pendant norbornadiene moiety and storage stability of the resulting quadricyclane group in the polymer

A polymer bearing pendant norbornadiene (NBD) moieties and a low molecular weight model compound ([2-carbobenzyloxy-3-phenyl-2,5-norbornadiene CBPNB)], were synthesized by substitution reaction of poly(p-chloromethylstyrene) and benzyl chloride, respectively, with the potassium salt of 3-phenyl-2,5-norbornadiene-2-carboxylic acid. Photochemical valence isomerization and storage stabilities of the resulting polymer having corresponding pendant quadricyclane (QC) groups and the low molecular weight QC compound were investigated in dichloromethane solution. It was found that the rate of photochemical valence isomerization of the pendant NBD moiety in the polymer was the same as or slightly higher than that of CBPNB, and the storage stability of the QC group in the polymer was higher than that of the QC compound resulting from CBPNB in the solution. The photochemical reaction of the pendant NBD moiety within the polymer without catalyst proceeded quantitatively in the film state. However, the photochemical reaction of the polymer films blended with 5,10,15,20-tetraphenyl-21H,23H-porphine cobalt (II) catalyst (Co-TPP) did not proceed quantitatively, and the degree of conversion of the pendant NBD moiety in the polymer decreased with increasing amounts of Co-TPP in the film. The QC group produced in the polymer by photo-irradiation had excellent storage stability in the film state without Co-TPP. On the other hand, the QC group in the polymer films blended with Co-TPP Catalyst reverted gradually to the NBD group at room temperature.