Influence of monofunctional reactants on the physical properties of dimer acid‐based polyamides

Dimer acid‐based polyamides were synthesized by condensation polymerization in the absence and presence of monofunctional reactants. Acetic acid, oleic acid and propyl amine were used as monofunctional reactants. The influences of the equivalent percentage (E%) and type of monofunctional reactant on the physical properties of dimer acid‐based polyamides such as glass transition temperature (T_g), melting point (T_m), heat of fusion (ΔH), degree of polymerization (DP), number average molecular weight (M_n), and kinematic viscosity were investigated. The molecular weight and viscosity of dimer acid‐based polyamides decreased with the increase in equivalent percentage of monofunctional reactant. Differential scanning calorimetry (DSC) studies showed that acetic acid and propyl amine had higher effect on the thermal properties of polyamides than that of oleic acid. In the case of polyamides prepared in the presence of acetic acid, the values of T_g, T_m, and ΔH of the polyamides increased remarkably with the increase in acetic acid content. On the contrary, propyl amine had a decreasing effect on the values of T_g, T_m, and ΔH of the polyamides. Incorporation of oleic acid into the polymer structure had no significant effect on the values of T_g and T_m of the dimer acid‐based polyamides. Copyright © 2006 John Wiley & Sons, Ltd.     

Effect of N-methyl substitution on the thermal decomposition processes in aliphatic–aromatic polyamides

The thermal decomposition processes of two polyamides, derived from succinic acid and two aromatic diamines, were studied by direct pyrolysis mass spectrometry. Fast atom bombardment (FAB) mass spectrometry has been also used in order to provide additional information for the elucidation of the thermal degradation mechanism of the polymers investigated. FAB mass spectra, obtained by introducing in the FAB ion source the solid residues from polymer pyrolysis performed in thermogravimetric experiments, allowed the detection of diagnostic compounds up to about 1600 amu. Our results indicate that the thermal stability of the N-methyl-substituted polyamide is higher than that of the unsubstituted polyamide. The difference in the thermal degradation mechanism accounts for the difference in the thermal stability of the two polyamides. In fact, the unsubstituted polyamide decomposes via an intramolecular exchange and a concomitant N? H hydrogen transfer process with formation of compounds with amine and/or succinimide end groups. Instead, the N-methyl-substituted polyamide decomposes via an α C? H hydrogen transfer process from the methyl group to the nitrogen atom with formation of compounds with amine and/or 2,5-piperidinedione end groups.     

Synthesis of new aromatic polyamides containing α-amino phosphonate with high thermal stability and low heat release rate

The new aromatic polyamides containing α-amino phosphonate were synthesized from phosphorus-based dicarboxylic acid 4 and various aromatic diamines by direct polycondensation reaction. Dicarboxylic acid 4 was successfully synthesized from trimethyl phosphite, 4-aminobenzoic acid and terephthaldehyde via a three-component reaction. The polymerization reaction produced the polyamides 6a–f with high yield and desirable inherent viscosities. The thermal properties of the all samples were investigated by thermo-gravimetric analysis (TGA). The TGA results in N₂ exhibited the 10% mass loss temperatures (T₁₀) in the ranges of 324–345 °C, while the T₁₀ resulted from thermo-oxidative degradation were higher than those. The main data obtained by microscale combustion calorimetry revealed acceptable combustion properties such as very low peak of heat release rate for the synthesized polyamides 6a–f. The all of the results indicated that these polyamides can be potentially utilized as additive for improvement of thermal resistance and combustion behavior of thermoplastic materials.

     

A theoretical study of carbazole dimers: Does carbazole form an excimer that undermines the performance of organic light emitting diodes?

Carbazole (Cz) dimers in various cofacial conformations, including staggered (Stg), anti, and syn, were explored by means of ab initio calculations at scaled opposite-spin (SOS)-MP2, SOS-CIS(D₀), and additional coupled cluster calculation levels. Similar to other π-conjugated molecules, strong Cz excimers form in the syn conformation in both S₁ and T₁ states, leading to significantly reduced optical excitation energies. Upon excitation, the dimers in the Stg and anti-conformations remain simple excited dimers, exhibiting similar optical energy gaps to those of the monomer. Being far more stable in the ground state, however, the Stg dimer is nearly isoenergetic to the syn dimer in the S₁ state and even more stable in the T₁ state. Given that the intermolecular interactions in the ground state are expected to govern the dimer conformations of Cz-based materials in the solid-state films of organic electronics, our results strongly demonstrate that the electronic excitation of Cz dimers do not necessarily lead to the strong excimer formation unless Cz molecules are forced to be arranged in the syn conformation.     

New processable polyaromatic amides curable by Diels-Alder cycloaddition

New processable polyaromatic amides were prepared from the acid chloride of bis-m-carboxyphenyl acetylene (V), the acid chloride of 1,4-bis-m-carboxyphenyl-1,3-butadiene (VI), and several aromatic diamines. The polyamides that contained acetylene units were cured by Diels-Alder cycloaddition reaction with 1,4-diphenyl-1,3-butadiene, whereas the polyamides with 1,3-butadiene units were cured with N-phenyl maleimide. Cured polyamides showed an increase in t_g, thermal, and heat stabilities. The polyamides can be cast into films and produce good glass-fiber laminates.     

N-methyl-substituted aromatic polyamides

A series of N-methyl-substituted aromatic polyamides derived from the secondary aromatic diamines 4,4′-bis(methylamino)diphenylmethane, 3,3′-bis(methylamino)diphenylmethane, 4,4′-bis(methylamino)benzophenone or 3,3′-bis(methylamino)benzophenone and isophthaloyl dichloride, and terephthaloyl dichloride or 3,3′-diphenylmethane dicarboxylic acid dichloride was prepared by high-temperature solution polymerization in s-tetrachloroethane. Compared with analogous unsubstituted and partly N-methylated aromatic polyamides, the full N-methylated polyamides exhibited significantly lower glass transition temperatures (T_g), reduced crystallinity, improved thermal stability, and good solubility in chlorinated solvents.     

Synthesis of β,β′‐Porphyrin Dimer Linked by Vinylene

Synthesis of a novel β,β′‐tetraalkylporphyrin dimer linked by vinylene was discribed, in which the dimer was readily prepared from a porphyrin‐derived Wittig reagent and a mono‐formylated porphyrin via Wittig reaction. No π‐conjugation between the two porphyrin rings was obserbed, and the dimer was in trans form.     

High α transitions of new polyamides based on diamantane

A series of new polyamides were synthesized by direct polycondensation of the 1,6-bis(4-aminophenyl)diamantane with various dicarboxylic acids. The soluble polyamides had high inherent viscosities, ranging from 0.73 to 1.21 dL/g. Polyamides derived from 5-tert-butylisophthalic acid and (±)-1,3-cyclohexanedicarboxylic acid were soluble in N-methyl-2-pyrrolidone (NMP) and pyridine. When NMP and N-dimethylacetamide (DMAc) were added with 3% (w/v) LiCl, the solubilities of polyamides derived from 4,4′-oxybis(benzoic acid) and cis-1,4-cyclohexanedicarboxylic acid were markedly enhanced. Polyamides had tensile strengths of up to 87.8 MPa, elongation to breakage values of up to 19.3%, and initial moduli of up to 2.1 GPa. Dynamic mechanical analysis (DMA) reveals that the polyamides have three relaxations. Their α relaxations occurred at high temperatures, ranging from 380 to 462°C. Three of polyamides exhibited good retention of storage modulus (above 10⁸ Pa) at a temperature exceeding 410°C. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1257–1263, 1998     

Thermal polymerization mechanism of thitsiol separated from Gluta usitata

Thitsiol separated from Gluta usitata lacquer sap was polymerized by thermal catalysis, and the dimers were purified by HPLC. The dimer chemical structures were characterized by NMR and field desorption mass spectrometry spectroscopy. Almost all dimers have biphenyl nuclear–nuclear (C–C) structure that is somewhat different to the thitsiol dimer obtained from laccase catalysis. Based on these results, the thermal polymerization mechanism of thitsiol was discussed.     

Polyamides containing arylene sulfone ether linkages

Polyamides containing arylene sulfone ether linkages were synthesized from 4,4′-[sulfonylbis(p-phenyleneoxy)] dibenzoyl chloride (SPCI), 3,3′-[sulfonylbis(p-phenyleneoxy)] dibenzoyl chloride (SMCl), and arylene sulfone ether diamines (SED), by solution and interfacial polymerization techniques. In solution polymerization, the effect of various acid acceptors such as propylene oxide (PO), lithium chloride (LiCl)/lithium hydroxide (LiOH), and triethylamine (TEA) on molecular weight of the polyamides was studied. The effect of methyl substituted and unsubstituted aromatic sulfone ether diamines on molecular weight and thermal properties of polyamides was also studied. The polyamides prepared were characterized by solution viscosity, elemental analysis, thermal gravimetric analysis, differential scanning calorimetry, and x-ray diffraction. Physical and thermal properties of polyamides prepared from SPCl and SED were compared with the polyamides prepared from SMCl and SED.     

Synthesis and Properties of Polyamides of 2,2′-[Isopropylidenebis-(p-phenyleneoxy)] diacetic Acid

A group of six semiaromatic polyamides of 2,2′-[isopropylidenebis-(p-phenyleneoxy)]diacetic acid (Bisacid A₂) were synthesized by low-temperature solution polycondensation techniques. Six different diamines were condensed independently with Bisacid A₂ chloride in a mixture of N-methylpyrrolidone (NMP and hexamethylhosphoramide (HMPA). The polymers were obtained in 82–95% yield and possessed inherent viscosities in the range from 0.32 to 0.63 dL/g. The polyamides were characterized by IR and 'H-NMR spectra. The molecular weight and molecular weight distribution of the polyamides were determined by gel-permeation chromatography. The thermal stability, thermal degradation kinetics, crystallinity, density, and solubility were also determined. A model diamide (MDA) was synthesized from aniline and Bisacid A₂ chloride to confirm the formation of polyamides from diamines.     

Synthesis and characterization of N‐benzoylated wholly aromatic polyamides from 4,4′‐oxydianilinobis(benzimidoyl) chloride and aromatic dicarboxylic acids

A novel type of polyamides, N‐benzoylated wholly aromatic polyamides, were synthesized by low‐temperature solution polycondensation of a new aromatic bis(imidoyl) chloride, 4,4′‐oxydianilinobis(benzimidoyl) chloride, with aromatic dicarboxylic acids, 4,4′‐oxydibenzoic acid and isophthalic acid. Compared with the conventional all aromatic polyamides and also N‐phenylated wholly aromatic polyamides, these N‐benzoylated aramides exhibit better solubility in organic solvents, lower glass transition temperatures and thermal stability.     

METAL ADHESIVE PROPERTIES OF POLYAMIDES HAVING 4,5-DI(1,4-PHENYLENE)-IMIDAZOLEDIYL STRUCTURE

Polyamides were synthesized by the direct polycondensation of aromatic diamines containing 4,5-imidazolediyl structure with aliphatic dicarboxylic acids, and the metal adhesive properties of these polymaides were studied. The inherent viscosity of the obtained polyamides was in the range of 0.28 to 0.71 dl g^?1. The decomposition temperatures (T _ds) of the obtained polyamides were above 400°C and their glass transition temperatures (T _gs) were from 168 to 198°C. These polyamides also showed good solubilities in polar solvents, such as N-methyl-2-pyrrolidone (NMP), N,N-dimethylacetamide (DMAc) and formic acid. A standard tensile test was performed in order to examine the adhesive property of these polyamides for stainless steel, and the obtained polyamides showed excellent tensile strengths, e.g. polyamide P1s derived from 4,5-di(4-aminophenyl)imidazole (DAPI) and sebasic acid had values of 212 kgf cm^?2 at 20°C, 183 kgf cm^?2 at 120°C, and 133 kgf cm^?2 at 180°C. A commercially available epoxy resin was also examined, and showed great tensile strength at 20°C. However, the strength of the epoxy resin was found to decrease with increasing temperature, whereas polyamide having 4,5-imidazolediyl structure retains its strength at temperatures of up to 180°C. In addition, the polyamide was also derived from 4,4″-diamino-o-terphenyl(DAOT) (rather than DAPI) and sebasic acid, and the properties of the polyamides derived, respectively from DAPI and DAOT were compared.     

Preparation of phosphorus-containing polymers. XXV. Polyamide-imides that contain phenoxaphosphine rings

New phenoxaphosphine-containing polyamide-imides were prepared by cyclodehydration of the polyamide-amic acids obtained from 8-chloroformyl-10-phenylphenoxaphosphine-2,3-dicarboxylic anhydride 10-oxide and diamines by a low-temperature solution polycondensation. Polymers with reduced viscosities of 0.10–0.59 dl/g in DMA or concentrated H₂SO₄ at 30°C were obtained in 64–97% yields. All the polyamide-imides were soluble in m-cresol, concentrated H₂SO₄, and dichloroacetic acid and some of them were soluble in DMF, DMA, and DMSO; the polyamide-imides had better solubility in organic solvents than phenoxaphosphine-containing polyimides. The phenoxaphosphine-containing polyamide-imides derived from aromatic diamines exhibited excellent thermal properties and little degradation below about 400°C, whereas the polymers from aliphatic diamines began to lose weight at about 250°C. They appeared to have thermal stability between phenoxaphosphine-containing polyimides and polyamides. These polyamide-imides exhibited self-extinguishing behavior.     

Linear polyamides from L‐malic acid and alkanediamines

A series of linear polyamides (PnMLM) derived from O‐methyl‐protected L ‐malic acid and 1,n‐alkanediamines with even n values ranging from 4 to 12 were prepared and fully characterized. L ‐Malic acid entered in the chain with a random orientation rendering essentially aregic polymers. PnMLM displayed optical rotation consistent with the content of the polymer in malic units, and they all were crystalline with melting points ranging from 158 to 188 °C and glass‐transition temperatures varying from 37 to 70 °C. PnMLM appeared to be fairly stable to heat with thermal decomposition starting close to 300 °C. Hydrolytic degradation of PnMLM at 37 °C was slow, but the process was significantly faster at 70 °C. Thermal degradation took place with the formation of cyclic malimides in the residual polymer and released the 1,n‐alkanediamine. However, hydrolytic degradation took place in a first stage with the formation of open chains of carboxylic‐ and amine‐ended oligomers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1566–1575, 2004     

Synthesis and Characterization of Heat-Resistant Polyamides from Thiadiazacycloheptatriene Dicarboxylic Acid

Novel polyamides containing 2,3,6,7-dibenzo-1-thia-4,5-diazacy-clohepta-2,4,6-triene-4′,4″-dicarboxy-l, l-dioxide (VII) are reported. The acid VII was prepared in several steps from p-chlorobenzoic acid and characterized by spectral data and elemental analysis. Prior to polymer synthesis, a model diamide (MDA) was prepared from VII and p-toluidine. The model diamide and several polyamides were obtained in an overall yield of (75-90%) by direct polycondensation of acid VII with certain diamines through a phosphorylation reaction at 100-110°C employing a solvent mixture of NMP-pyridine. The resulting polyamides and MDA were characterized by spectral, analytical, and thermal methods. The solubility, density, viscosity, and morphology (X-ray) were also studied for the polyamides. These polymers were moderately soluble in conventional polymer solvents, and the inherent viscosities were measured in concentrated sulfuric acid. Integral procedural decomposition temperatures (ipdt) were calculated from their primary thermogram in the temperature range 100-650°C in order to have quantitative data regarding their relative thermal stabilities. The polymers exhibit a 10% weight loss at 500°C in static air.     

Synthesis and properties of polyamides of p-phenylenedioxydiacetic acid

Several polyamides of p-phenylenedioxydiacetic acid (PDDA) were synthesized by the low-temperature solution polycondensation techniques. Six different diamines were condensed independently with p-phenylenedioxydiacetyl chloride (PDC) in a mixture of N-methyl pyrolidone (NMP) and hexamethyl phosphoramide (HMPA). The polymers were obtained in 80–95% yield and possessed inherent viscosities in the range 0.32–0.81 dL/g. The polymers were characterized by infrared (IR) and H¹-NMR spectra. The solubility, density, crystallinity, and thermal stability of the polyamides were also determined. A model diamide (MDA-1) was also synthesized from aniline and PDC to confirm the formation of polyamides from diamines.     

Aromatic polyisophthalamides with N-benzylidene pendant groups

A new series of modified polyisophthalamides bearing N-benzylidene pendant groups was prepared by reacting various aromatic diamines with 5-(N-benzylidene) isophthalic acid. The latter was synthesized from the reaction of 5-aminoisophthalic acid with benzaldehyde and characterized by IR and ¹H-NMR spectroscopy. Triphenyl phosphite and pyridine was used as condensing agents for preparing polyamides. In addition, the corresponding unsubstituted polyisophthalamides were prepared under identical experimental conditions for comparative purposes. Characterization of modified polyamides was accomplished by IR as well as inherent viscosity measurements. They showed a slightly lower solubility in various media than the corresponding unsubstituted polyamides. The cured modified polyamides displayed significantly higher thermal stability than the cured unsubstituted polyamides. They were stable up to 355–308°C in N₂ or air and afforded anaerobic char yield of 66–61% at 800°C. © 1992 John Wiley & Sons, Inc.     

Synthesis and characterization of polycyclic structures and linear polycarbonate copolymers from a bisphenol A dimer

An o,o′‐methylene‐bridged bisphenol A (BPA) dimer 2 was synthesized by a one‐step reaction between formalin and excess BPA in the presence of a cation exchange resin in a polar aprotic solvent. Novel oligomeric polycyclic structures were synthesized by the reaction of reactive difunctional halides, methyl phosphonic dichloride, phenyl phosphonic dichloride, and dimethyl dichlorosilane with the BPA dimer under high‐dilution conditions. The yields of the polycyclics were quite high. NMR and matrix‐assisted laser desorption ionization–time of flight mass spectrometry (MALDI–TOF MS) were very useful in the characterization of the dimer and its oligomeric polycyclic analogs. These polycyclics can potentially be used as precursors for advanced thermosetting materials. A series of polycarbonate copolymers of BPA were synthesized by solution polycondensation of the methylene bridged dimer of BPA with triphosgene. Alternatively, the co‐polycarbonate containing crosslinkable moieties was synthesized by in‐situ polymerization of BPA and BPA dimer with triphosgene. The copolymers were characterized by GPC. TG/DTA and DSC were used to investigate the thermal properties of the co‐polycarbonates. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 927–935, 1999     

Novel determination of the dimerization mechanism for thermal polymerization of α-methylstyrene

This study discussed the phenomena on thermal polymerization of α-methylstyrene (AMS). A curve scanned by temperature-programmed technique was performed by differential scanning calorimetry (DSC). Heat of polymerization (ΔH) and onset temperature of exothermic (T₀) behavior were determined to be 280±10 J g^-1 and about 138±1°C, respectively. A dimer formation mechanism was proposed for initiation of the propagating chain. Spectroscopic identification of dimer structure was conducted by infrared (IR) spectroscopy in the wavenumber from 650 to 1100 cm^-1associated with molecular fingerprint characteristics. The mechanism of thermal polymerization on α-methylstyrene proposed in this study was similar to that of styrene suggested by Mayo.