Self-crosslinkable polymers. I. Copolymerization of glycidyl methacrylate with 2-vinylpyridine and 2-vinyl-5-ethylpyridine

A soluble and self-crosslinkable linear copolymer with pendant epoxy and pyridyl groups was obtained from glycidyl methacrylate (M₁) and 2-vinylpyridine (M₂) or 2-vinyl-5-ethylpyridine (M₂) by the action of azobisisobutyronitrile. The monomer reactivity ratios were determined in tetrahydrofuran at 60°C: r₁ = 0.510, r₂ = 0.620 with 2-vinylpyridine and r₁ = 0.57, r₂ = 0.62 with 2-vinyl-5-ethylpyridine. These were consistent with the calculated values with the reported Q and e values for these monomers. The intrinsic viscosities of the copolymers with 2-vinylpyridine and with 2-vinyl-5-ethylpyridine were found to be 0.17–0.19 and 0.26–0.38, respectively, in tetrahydrofuran at 30°C; they were independent of the copolymer composition. The copolymers were amorphous, had no clear melting points, and became insoluble crosslinked polymers under heating without further addition of any curing agents.     

Intramolecular charge transfer complexes. VIII. Poly[N-(2-hydroxyethyl) carbazolyl acrylate-co-2,4-dinitrophenyl methacrylate]

Radical copolymerization of N-(2-hydroxyethyl) carbazolyl acrylate (HECA, M₁) with 2,4-dinitrophenyl methacrylate (DNPM, M₂) can be described by a simple terminal mechanism having the relative reactivities r₁ = 0.14, r₂ = 1.10 (at 60°C); 0.28, 0.96 (80°C); and 0.41, 0.79 (100°C), respectively. The dependence of the reactivity ratio values on copolymerization temperature, analyzed by Arrhenius equation, takes place mainly through the frequency factor. The copolymers obtained are intramolecular charge transfer complexes. The intramolecular interaction is evidenced by the shift of the aromatic protons from the DNPM structural unit in the copolymers' ¹H-NMR (nuclear magnetic resonance) spectra. This shift depends on sequence distribution and chain conformation, but is not affected by the copolymerization temperature.     

Novel Copolymers of 4-Fluorostyrene. 11. Some Ring-substituted 1,1-dicyano-2-(1-naphthyl)ethylenes

Novel copolymers of trisubstituted ethylene monomers, ring-substituted 1,1-dicyano-2-(1-naphthyl)ethylenes, RC₁₀H₆CH?C(CN)₂ (where R is H, 2-OCH₃, 4-OCH₃) and 4-fluorostyrene were prepared by solution copolymerization in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is (5.86) > 2-CH₃O (4.28) > 4-CH₃O (2.87). Relatively high T_g of the copolymers in comparison with that of poly(4-fluorostyrene) indicates a decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500°C range with residue (7.3–7.7% wt.), which then decomposed in the 500–800°C range.     

Novel Copolymers of Styrene. 1. Alkyl Ring-Substituted Butyl 2-Cyano-3-Phenyl-2-Propenoates

Novel trisubstituted ethylenes, alkyl ring-substituted butyl 2-cyano-3-phenyl-2-propenoates, RPhCH=C(CN)CO₂C₄H₉ (where R is 2-methyl, 3-methyl, 4-methyl, 2-ethyl, 4-ethyl, 4-butyl, 4-t-butyl, 4-i-butyl) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and butyl cyanoacetate, and characterized by CHN analysis, IR, ¹H and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r₁) for the monomers is 4-ethyl (4.69) > 3-methyl (4.18) > 4-t-butyl (2.98) > 2-ethyl (2.52) > 4-butyl (2.47) > 4-methyl (1.86) > 4-i-butyl (0.94) > 2-methyl (0.87). Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500°C range with residue (3–8% wt), which then decomposed in the 500–800°C range.     

Silyl enol ethers as monomer. III. Radical polymerization and copolymerizations of 2-trimethylsilyloxy-1,3-butadiene and desilylation of the resulting polymers

2-Trimethylsilyloxy-1,3-butadiene (TMSBD), the silyl enol ether of methyl vinyl ketone, was homopolymerized with a radical initiator to afford polymers with a molecular weight of ca. 10⁴. Radical copolymerizations of TMSBD with styrene (ST) and acrylonitrile (AN) in bulk or dioxane at 60°C gave the following monomer reactivity ratios: r₁ = 0.64 and r₂ = 1.20 for the ST (M₁)–TMSBD (M₂) system and r₁ = 0.036 and r₂ = 0.065 for the AN (M₁)–TMSBD (M₂) system. The Q and e values of TMSBD determined from the reactivity ratios for the former copolymerization system were 2.34 and ?1.31, respectively. The resulting polymer and copolymers were readily desilylated with hydrochloric acid or tetrabutylammonium fluoride as catalyst to yield analogous polymers having carbonyl groups in the polymer chains.     

Radical and cationic polymerizations of 3‐ethyl‐3‐methacryloyloxymethyloxetane

3‐Ethyl‐3‐methacryloyloxymethyloxetane (EMO) was easily polymerized by dimethyl 2,2′‐azobisisobutyrate (MAIB) as the radical initiator through the opening of the vinyl group. The initial polymerization rate (R_p) at 50 °C in benzene was given by R_p = k[MAIB]^0.55 [EMO]^1.2. The overall activation energy of the polymerization was estimated to be 87 kJ/mol. The number‐average molecular weight (M?_n) of the resulting poly(EMO)s was in the range of 1–3.3 × 10⁵. The polymerization system was found to involve electron spin resonance (ESR) observable propagating poly(EMO) radicals under practical polymerization conditions. ESR‐determined rate constants of propagation (k_p) and termination (k_t) at 60 °C are 120 and 2.41 × 10⁵ L/mol s, respectively—much lower than those of the usual methacrylate esters such as methyl methacrylate and glycidyl methacrylate. The radical copolymerization of EMO (M₁) with styrene (M₂) at 60 °C gave the following copolymerization parameters: r₁ = 0.53, r₂ = 0.43, Q₁ = 0.87, and e₁ = +0.42. EMO was also observed to be polymerized by BF₃OEt₂ as the cationic initiator through the opening of the oxetane ring. The M?_n of the resulting polymer was in the range of 650–3100. The cationic polymerization of radically formed poly(EMO) provided a crosslinked polymer showing distinguishably different thermal behaviors from those of the radical and cationic poly(EMO)s. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1269–1279, 2001     

Cationic copolymerization of 2-methylene-5,5-dimethyl-1,3-dioxane with 2-methylene-1,3-dioxolane and 2-methylene-1,3-dioxane

Copolymers of the cyclic ketene acetals, 2-methylene-5,5-dimethyl-1,3-dioxane, 3 , (M₁) with 2-methylene-1,3-dioxolane, 4 , (M₂) or 2-methylene-1,3-dioxane, 5 , (M₂), were synthesized by cationic copolymerization. An experimental method was designed to study the reactivity of these very reactive and extremely acid sensitive cyclic ketene acetal monomers. The reactivity ratios, calculated using a computer program based on a nonlinear minimization algorithm, were r₁ = 6.36 and r₂ = 1.25 for the copolymerization of 3 with 4 , and r₁ = 1.56 and r₂ = 1.42 for the copolymerization of 3 with 5. FTIR and ¹H-NMR spectra when combined with the values of r₁ and r₂ showed that these copolymers were formed by a cationic 1,2-polymerization (ring-retained) route. Furthermore the tendency existed to form very short blocks of M₁ or M₂ within the copolymers. Cationic copolymerization of cyclic ketene acetals have the potential to be used for synthesis of novel polymers. © 1996 John Wiley & Sons, Inc.     

Organometallic polymers. XIV. Copolymerization of vinylcyclopentadienyl manganese tricarbonyl and vinylferrocene with N-vinyl-2-pyrrolidone

N-Vinyl-2-pyrrolidone(I) has been copolymerized with vinylferrocene(II) and vinylcyclopentadienyl manganese tricarbonyl(III) in degassed benzene solutions with the use of azobisisobutyronitrile (AIBN) as the initiator. The polymerizations proceed smoothly, and the relative reactivity ratios were determined as r₁ = 0.66, r₂ = 0.40 (for copolymerization of I with II, M₁ defined as II) and r₁ = 0.14 and r₂ = 0.09 (for copolymerization of I with III, M₁ defined as III). These copolymers were soluble in benzene, THF, chloroform, CCl₄, and DMF. Molecular weights were determined by viscosity and gel-permeation chromatography studies (universal calibration technique.) The copolymers exhibited values of M?_n between 5 × 10³ and 10 × 10³ and M?_w between 7 × 10³ and 17 × 10³ with M?_w/M?_n < 2. Upon heating to 260°C under N₂, copolymers of III underwent gas evolution and weight loss. The weight loss was enhanced at 300°C, and the polymers became in creasingly insoluble. Copolymers of vinylferrocene were oxidized to polyferricinium salts upon treatment with dichlorodicyanoquinone (DDQ) or o-chloranil (o-CA) in benzene. Each unit of quinone incorporated into the polysalts had been reduced to its radical anion. The ratio of ferrocene to ferricinium units in the polysalts was determined. The polysalts did not melt at 360°C and were readily soluble only in DMF.     

Novel Copolymers of Styrene. 4. Halogen Ring-Substituted Butyl 2-Cyano-3-Phenyl-2-Propenoates

Novel trisubstituted ethylenes, halogen ring-substituted butyl 2-cyano-3-phenyl-2-propenoates, RPhCH ? C(CN)CO₂C₄H₉ (where R 2-Br, 3-Br, 4-Br, 2-Cl, 3-Cl, 4-Cl, 2-F, 3-F, 4-F) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and butyl cyanoacetate, and characterized by CHN analysis, IR, ¹H and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H and ¹³C?NMR. The order of relative reactivity (1/r₁) for the monomers is 3-F (22.97) > 3-Br (6.05) > 2-Cl (4.32) > 4-F (3.19) > 4-Br (2.47) > 4-Cl (1.92) > 2-F (1.74) > 3-Cl (1.10) > 2-Br (1.07). Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500°C range with residue (2.3–5.9% wt.), which then decomposed in the 500–800°C range.     

Novel Copolymers of Trisubstituted Ethylenes and Styrene. 7. Dihalogen Ring-Substituted Ethyl 2-Cyano-1-oxo-3-phenyl-2-propenylcarbamates

Electrophilic trisubstituted ethylenes, dihalogen ring-substituted ethyl 2-cyano-1-oxo-3-phenyl-2-propenylcarbamates, RC₆H₃ CH = C(CN)CONHCO₂C₂H₅(where R is 2,3-diCl, 2,4-diCl, 2,6-diCl, 3,4-diCl, 3,5-diCl, and 2-Cl-6-F, were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and N-cyanoacetylurethane, and characterized by CHN analysis, IR, ¹H- and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H- and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers 2,4-diCl (4.4) > 2,6-diCl (3.6) > 2,3-diCl (3.4) = 3,4-diCl (3.4) > 2-Cl-6-F (2.7) > 3,5-diCl (2.0). High T _g of the copolymers in comparison with that of polystyrene indicates decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene structural unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in 270–420°C with residue (5–13% wt), which then decomposed in the 420–650°C range.     

NOVEL COPOLYMERS OF TRISUBSTITUTED ETHYLENES WITH STYRENE. I. 2-HALOPHENYL-1,1-DICYANOETHYLENES

Electrophilic trisubstituted ethylene monomers, 2-halophenyl-1,1-dicyanoethylenes, RC₆H₄CH=C(CN)₂ (where R is o-Cl, m-Cl, p-Cl, p-Br, and p-F) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and malononitrile, and characterized by CHN elemental analysis, IR, ¹H and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (AIBN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is p-Cl (14.8) >m-Cl (2.67)> o-Cl (1.82) > p-Br (1.52) > p-F (1.36). High T _g's of the copolymers (> 150°C) in comparison with that of polystyrene indicate a substantial decrease in the chain mobility of the copolymers due to the high dipolar character of the trisubstituted monomer unit. Gravimetric analysis indicated that the copolymers decompose in the range 300–400°C.     

Novel Copolymers of Difluoro Ring-substituted 2-Phenyl-1,1-dicyanoethylenes with 4-Fluorostyrene: Synthesis,Structure and Dielectric Study

Copolymerization of fluorine ring-substituted 2-phenyl-1,1-dicyanoethenes, RC₆H₃CH?C(CN)₂ (R is 2,3-F,F, 2,4-F,F, 2,5-F,F, 2,6-F,F, and 4-CF₃) with 4-fluorostyrene were prepared in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the copolymers were characterized by IR, ¹H and ¹³C-NMR, GPC, DSC, and TGA. The monomer reactivity ratios for 4-fluorostyrene (M₁), r₁ = 0.6 and 2-(2,4-difluorophenyl)-1,1-dicyanoethene (M₂), r₂ = 0 were determined from Fineman-Ross plot. The order of relative reactivity (1/r₁) for difluoro-substituted monomers is 2,4-F,F (0.31) > 2,3-F,F (0.25) > 2,5-F,F (0.22) > 2,6-F,F (0.10). DSC curves showed that the copolymers were amorphous with high T _g in comparison with that poly(4-fluorostyrene) indicating a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer units. From the thermogravimetric analysis, the copolymers began to degrade in the range 214–260°C. The copolymer of 4-fluorostyrene and 2-(2,4-difluorophenyl)-1,1-dicyanoethene and poly(4-fluorostyrene) were dielectrically characterized in the range 25–200°C. The dominating relaxation process detected in both materials was the α-relaxation, associated with the dynamic glass transition. The relationship polarity-permittivity was discussed.     

Novel copolymers of styrene. 1. Alkyl ring-substituted propyl 2-cyano-3-phenyl-2-propenoates

Trisubstituted ethylenes, alkyl ring-substituted propyl 2-cyano-3-phenyl-2-propenoates, RPhCH?C(CN)CO₂C₃H₇ (where R is H, 2-methyl, 3-methyl, 4-methyl, 4-ethyl, 4-propyl, 4-i-propyl, 4-butyl, 4-i-butyl, 4-t-butyl) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and propyl cyanoacetate, and characterized by CHN analysis, IR, ¹H and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H and ¹³C-NMR. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 250–500°C range with residue (2–4% wt.), which then decomposed in the 500–800°C range.     

Reactive oligomers. I. Preparation and polymerization of ethylene glycol bis(methyl fumarate)

Ethylene glycol bis(methyl fumarate) (EGBMF) was prepared as a new type of divinyl compound and reactive oligomer: a needle crystal, m.p. 104.5°C. Homopolymerization of EGBMF was carried out in dioxane with 0.1 mol/L AIBN at [M] = 1 mol/L and 60°C; the rate of polymerization was estimated to be 4.44 × 10^?6 mol/L s in a good agreement with diethyl fumarate (DEF). The cyclization constant K_c was obtained as 1.64 mol/L, being rather low compared with diallyl oxalate which is 1,9-diene having two ester groups analogous to EGBMF. Gelatin occurred at about 35% conversion. Finally, the copolymerization of EGBMF (M₁) with diallyl phthalate (DAP) (M₂) is tentatively explored with the intention of the improvement of allyl resins in mechanical properties; remarkable rate enhancement was observed for copolymerization. The monomer reactivity ratios were estimated to be r₁ = 0.96 and r₂ = 0.025, the r₁ value being reduced compared with the DEF-DAP copolymerization system. These results are discussed from the standpoint of steric effect on the polymerization of fumarate as an internal olefin.     

Temperature‐induced aggregation of the copolymers of N‐isopropylacrylamide and sodium 2‐acrylamido‐2‐methyl‐1‐propanesulphonate in aqueous solutions

A series of random copolymers of N‐isopropylacrylamide (NIPAM) and sodium 2‐acrylamido‐2‐methyl‐1‐propanesulphonate (AMPS) was synthesized by free‐radical copolymerization. The content of AMPS in the copolymers ranged from 1.1 to 9.6 mol %. The lower critical‐solution temperature (LCST) of copolymers in water increased strongly with an increasing content of AMPS. The influence of polymer concentration on the LCST of the copolymers was studied. For the copolymers with a higher AMPS content, the LCST decreased faster with an increasing concentration than for copolymers with a low content of AMPS. For a copolymer containing 1.1 mol % of AMPS the LCST dropped by about 3 °C when the concentration increased from 1 to 10 g/L, whereas for a copolymer containing 9.6 mol % of AMPS the LCST dropped by about 10 °C in the concentration range from 2 to 10 g/L. It was observed that the ionic strength of the aqueous polymer solution very strongly influences the LCST. This effect was most visible for the copolymer with the highest content of AMPS (9.6 mol %) for which an increase in the ionic strength from 0.2 to 2.0 resulted in a decrease in the LCST by about 27 °C (from 55 to 28 °C), whereas for the copolymer containing 1.1 mol % of AMPS the LCST decreased only by about 6 °C (from 37 to 31 °C) when the ionic strength increased from 0.005 to 0.3. The reactivity ratios for the AMPS and NIPAM monomer pairs were determined using different methods. The values of r_AMPS and r_NIPAM obtained were 11.0–11.6 and 2.1–2.4, respectively. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2784–2792, 2001     

Novel Copolymers of Styrene. 18. Halogen Ring-Trisubstituted Methyl 2-Cyano-3-Phenyl-2-Propenoates

Novel trisubstituted ethylene monomers, halogen ring-trisubstituted methyl 2-cyano-3-phenyl-2-propenoates, RPhCH=C(CN)CO₂CH₃, where R is 4-bromo-2,6-difluoro, 3-chloro-2,6-difluoro, 4-chloro-2,6-difluoro, 2,3,5-trichloro, 2,3,6-trichloro, and 2,4,5-trifluoro, were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of halogen ring-trisubstituted benzaldehydes and methyl cyanoacetate, and characterized by CHN analysis, IR, ¹H and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r₁) for the monomers is 3-Cl-2,6-F₂ (4.2) > 4-Cl-2,6-F₂ (3.9) > 4-Br-2,6-F₂ (1.8) > 2,3,5-Cl₃ (1.1) > 2,4,5-F₃ (0.9) > 2,3,6-Cl₃ (0.5). Relatively high T_g of the copolymers in comparison with that of polystyrene indicates a decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500°C range with residue (3.1–3.9% wt), which then decomposed in the 500–800°C range.     

Novel Copolymers of Styrene. 17. Ring-Trisubstituted Methyl 2-Cyano-3-Phenyl-2-Propenoates

Electrophilic trisubstituted ethylenes, ring-trisubstituted methyl 2-cyano-3-phenyl-2-propenoates, RPhCH = C(CN)CO₂CH₃ (where R is 2,4,6-trimethyl, 3,5-dimethoxy-4-hydroxy, 3,5-dimethyl-4-hydoxy, 3,4,5-trimethoxy, 2-bromo-3-hydroxy-4-methoxy, 5-bromo-2,3-dimethoxy, 5-bromo-2,4-dimethoxy, 6-bromo-3,4-dimethoxy were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-trisubstituted benzaldehydes and methyl cyanoacetate, and characterized by CHN analysis, IR, ¹H and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r₁) for the monomers is 5-bromo-2,3-dimethoxy (2.69) > 3,4,5-trimethoxy (1.86) > 6-bromo-3,4-dimethoxy (0.84) > 5-bromo-2,4-dimethoxy (0.39) > 4-hydoxy-3,5-dimethyl (0.31) = 2-bromo-3-hydroxy-4-methoxy (0.31) > 3,5-dimethoxy-4-hydroxy (0.24) > 2,4,6-trimethyl (0.22). Relatively high T_g of the copolymers in comparison with that of polystyrene indicates a decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500ºC range with residue (1–6% wt), which then decomposed in the 500–800ºC range.     

Novel Copolymers of Styrene. 7. Dihalogen Ring-substituted Ethyl 2-Cyano-3-phenyl-2-propenoates

Electrophilic trisubstituted ethylenes, dihalogen ring-substituted ethyl 2-cyano-3-phenyl-2-propenoates, RPhCH?C(CN)CO₂C₂H₅ (where R is 2,3-diCl, 2,4-diCl, 2,6-diCl, 3,4-diCl, 3,5-diCl, 2,3-diF, 2,4-diF, 2,5-diF, 2,6-diF, 3,4-diF, 3,5-diF) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and ethyl cyanoacetate, and characterized by CHN analysis, IR, ¹H and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is 3,4-diCl (1.89) > 2,4-diCl (1.84) > 3,5-diCl (1.40) > 2,6-diCl (1.21) > 2,4-diF (1.16) > 2,3-diF (1.01) > 2,3-diCl (0.74) > 3,4-diF (0.52) > 2,6-diF (0.45) > 3,5-diF (0.44) > 2,5-diF (0.33). Relatively high T_g of the copolymers in comparison with that of polystyrene indicates a decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 250–500°C range with residue (2.6–5.0 wt%), which then decomposed in the 500–800°C range.     

Radical polymerization of methyl trans-β-vinylacrylate

Methyl trans-β-vinylacrylate (MVA) undergoes radical polymerization with α,α′-azobis(isobutyronitrile) (AIBN) in bulk and solution. The polymer obtained consists of 85% trans-1,4 and 15% trans-3,4 units. Poly(MVA) (PMVA) is readily soluble in common organic solvents, but insoluble in n-hexane and petroleum ether. PMVA exhibits a glass transition at 60°C, and loses no weight up to 300°C in nitrogen. The kinetics of MVA homopolymerization with AIBN was investigated in benzene. The rate of polymerization (R_p) can be expressed by R_p = k[AIBN]^0.5[MVA]^1.0, and the overall activation energy has been calculated to be 94 kJ/mol. The propagation radical of MVA at 80°C was detected by ESR spectroscopy, which indicated that the unpaired electron of the propagating radical was completely delocalized over the three allyl carbons. Furthermore, the steady-state concentration of the propagating radical of MVA at 60°C was determined by ESR spectroscopy, and the propagation rate constant (k_p) was calculated to be 1.25 X 10² L/mol ·s. Monomer reactivity ratios in copolymerization of MVA (M₂) with styrene (M₁) are r₁ = 0.16 and r₂ = 4.9, from which Q and e values of MVA are calculated as 4.2 and -0.32, respectively. © 1995 John Wiley & Sons, Inc.     

Novel Copolymers of Styrene. 2. Oxy Ring-Substituted Butyl 2-Cyano-3-Phenyl-2-Propenoates

Novel trisubstituted ethylenes, oxy ring-substituted butyl 2-cyano-3-phenyl-2-propenoates, RPhCH=C(CN)CO₂C₄H₉ (where R is 2-methoxy, 3-methoxy, 4-methoxy, 2-ethoxy, 3-ethoxy, 4-ethoxy, 4-propoxy, 4-butoxy, 4-hexyloxy, 3-phenoxy) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of oxy ring-substituted benzaldehydes and butyl cyanoacetate and characterized by CHN elemental analysis, IR, ¹H- and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR, GPC, DSC, and TGA. The order of relative reactivity (1/r₁) for the monomers is 4-methoxy (6.56) > 3-methoxy (2.97) > 2-methoxy (2.72) > 4-butoxy (2.20) > 3-ethoxy (2.18) > 4-propoxy (2.15) > 4-hexyloxy (1.78) > 4-ethoxy (1.66) > 2-ethoxy (1.48) > 3-phenoxy (1.29). Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200-500°C range with residue (0.8–3.6% wt.), which then decomposed in the 500–800°C range.