Fully aromatic thermotropic liquid crystalline polyesters of substituted 4,4′-biphenols. IV. Homopolyesters with terephthalic acid and copolyesters with terephthalic acid and 4-hydroxybenzoic acid

A series of fully aromatic thermotropic polyesters based on mono-, di-, and tetra-substituted biphenols was prepared by the melt polycondensation method and examined for their thermotropic behavior by a variety of experimental techniques. The homopolyesters obtained from substituted biphenols containing either one phenyl or two phenyl groups as substituent(s) and TA formed nematic melts, but the homopolymers of the substituted biphenols containing either four sec-butyl groups or two tert-butyl groups with TA had melting transitions, T_m, above 400°C. Thus, it was not possible to determine whether they formed nematic melts. On copolymerization with 30 mol % HBA most of the resulting copolyesters had much lower T_m values, compared to those of respective homopolyesters, and the copolymers of the biphenol monomer containing the tert-butyl groups formed a nematic melt at an observable temperature. However, the copolymer of the biphenol with sec-butyl groups still had a T_m above 400°C. © 1993 John Wiley & Sons, Inc.     

Wholly aromatic thermotropic liquid crystalline polyesters of 3,3′-bis(phenyl)-4,4′-biphenol with 4,4′-benzophenone dicarboxylic acid

A series of wholly aromatic, thermotropic polyesters, derived from 3,3′-bis(phenyl)-4,4′-biphenol (DPBP), nonlinear 4,4′-benzophenone dicarboxylic acid (4,4′-BDA), and various linear comonomers, were prepared by the melt polycondensation reaction and characterized for their thermotropic properties by a variety of experimental techniques. The homopolymer of DPBP with 4,4′-BDA had a fusion temperature (T_f) at 265°C, exhibited a nematic phase, and had a liquid crystalline range of 105°C. All of the copolyesters of DPBP with 4,4′-BDA and either 30 mol % 4-hydroxybenzoic acid (HBA), 6-hydroxy-2-naphthoic acid (HNA), or 50 mol % terephthalic acid (TA), 2,6-naphthalenedicarboxylic acid (2,6-NDA) had low T_f values in the range of 220–285°C, exhibited a nematic phase, and had accessible isotropization transitions (T_i) in the range of 270–420°C, respectively. Their accessible T_i values would enable one to observe a biphase structure. Each of the copolymers with HBA or HNA had a much broader range of liquid crystalline phase. In contrast, each of the copolymers with TA or 2,6-NDA had a relatively narrow range of liquid crystalline phase. Each of these polyesters had a glassy, nematic morphology that was confirmed with the DSC, PLM, WAXD, and SEM studies. As expected, they had higher glass transition temperatures (T_g) in the range of 161–217°C than those of other liquid crystalline polyesters, and excellent thermal stabilities (T_d) in the range of 494–517°C, respectively. Despite their noncrystallinity, they were not soluble in common organic solvents with the exception that the homopolymer and its copolymer with TA had limited solubility in CHCl₃. However, they were soluble in the usual mixture of p-chlorophenol/1,1,2,2-tetrachloroethane (60/40 by weight) with the exception of the copolymer with 2,6-NDA. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 769–785, 1997     

Fully aromatic thermotropic liquid crystalline polyesters of 3-phenyl-4,4′-biphenol with 4,4′-benzophenone dicarboxylic acid

A series of fully aromatic, thermotropic polyesters, derived from 3-phenyl-4,4′-biphenol (MPBP), nonlinear 4,4′-benzophenone dicarboxylic acid (4,4′-BDA), and various other comonomers was prepared by the melt polycondensation method and characterized for their thermotropic liquid crystalline behavior by a variety of experimental techniques. The homopolymer of MPBP with 4,4′-BDA had a fusion temperature (T_f) at 240°C, exhibited a nematic liquid crystalline phase, and had a narrow liquid crystalline range of 60°C. All of the copolyesters of MPBP with 4,4′-BDA and either 30 mol % 4-hydroxybenzoic acid (HBA), 6-hydroxy-2-naphthoic acid (HNA) or 50 mol % terephthalic acid (TA), 2,6-naphthale-nedicarboxylic acid (2,6-NDA) and low T_f values in the range of 210–230°C, exhibited a nematic phase, and had accessible isotropization transitions (T_i) in the range of 320–420°C, respectively. As expected, each of them had a broader range of liquid crystalline phase than the homopolymer. They had a “frozen” nematic, glassy order as determined with the wide-angle X-ray diffraction (WAXD) studies. The morphology of each of the “as-made” polyesters had a fibrous structure as determined with the scanning electron microscopy (SEM), which arises because of the liquid crystalline domains. Moreover, they had higher glass transition temperatures (T_g) in the range of 167–190°C than those of other liquid crystalline polyesters, and excellent thermal stabilities (T_d) in the range of 500–533°C, respectively. © 1995 John Wiley & Sons, Inc.     

Fully aromatic liquid crystalline homopolyesters and copolyesters of 1,1′-binaphthyl-4,4′-diol

A series of fully aromatic, thermotropic polyesters based on 1,1′-binaphthyl-4,4′-diol, BND, was prepared by the melt polycondensation method and characterized for their thermotropic behavior by a variety of experimental techniques. The homopolymer of BND with terephthalic acid formed a nematic melt at 353°C. In contrast, the polyester from BND and 2,6-naphthalenedicarboxylic acid had a melting transition, T_m, above 400°C, so it was not possible with the equipment available to determine whether it formed a nematic melt. All of the copolymers of BND formed nematic melts at much lower T_m values than those of its respective homopolymers, as expected, because of the copolymerization effect of the added monomer. Moreover, all of the copolymers had higher glass transition temperatures, T_g, than those of other liquid crystalline polyesters and higher thermal stabilities. © 1994 John Wiley & Sons, Inc.     

Wholly aromatic thermotropic liquid crystalline polyesters of 4,4′-biphenol,substituted biphenols,and 1,1′-binaphthyl-4,4′-diol with 3,4′-benzophenone dicarboxylic acid

Wholly aromatic, thermotropic homopolyesters, derived from 4,4′-biphenol, substituted biphenols, or 1,1′-binaphthyl-4,4′-diol and 3,4′-benzophenone dicarboxylic acid, and two copolyesters, each of which contained 30 mol % of 6-hydroxy-2-naphthoic acid, were prepared by acidolysis polycondensation reactions and characterized for their liquid crystalline properties. The solubility behavior of these polymers has also been investigated. The two homopolymers of phenyl-substituted biphenols with 3,4′-benzophenone dicarboxylic acid were soluble in many common organic solvents. All of the homopolymers had lower T_m/T_f values than those with terephthalic acid, which was attributed to the incorporation of the asymmetric 3,4′-benzophenone dicarboxylate units in a head-to-head and head-to-tail fashion along the polyester chain. Two copolymers had lower T_m values than those of the respective homopolymers, as expected. They formed nematic phases which persisted up to 400°C, except those of phenyl-substituted biphenols with 3,4′-benzophenone dicarboxylic acid. Each of these two polymers also exhibited an accessible T_i transition, and had a broad range of LC phase. They had glass transition temperatures, T_g, in the range of 139-209°C and high thermal stabilities in the temperature range of 465-511°C. © 1995 John Wiley & Sons, Inc.     

Wholly aromatic thermotropic liquid crystalline polyesters of 2-(α-phenylisopropyl)hydroquinone; copolymers with 1,1′-biphenyl-4,4′-diol and 2,6-dihydroxynaphthalene

Two series of new aromatic copolyesters have been synthesized and their properties including liquid crystallinity have been studied. The first series was synthesized by polymerizing mixtures of diacetates of 2-(α-phenylisopropyl)hydroquinone and 1,1′-biphenyl-4,4′-diol with terephthalic acid, and the second by polymerizing mixtures of diacetates of 2-(α-phenylisopropyl)hydroquinone and 2,6-dihydroxynaphthalene with terephthalic acid. These polyesters were characterized by differential scanning calorimetry, thermogravimetric analysis, wide-angle X-ray diffractomerty, and optical microscopy. The glass transition temperatures of the first series decrease from 167 to 138°C as one increases the content of the 1,1′-biphenyl-4,4′-diol unit to 50 mol %. The T_g values of the second series are slightly higher than those of the first series, and appear to be less dependent on their composition. The degree of crystallinity of the first series decreases rapidly by copolymerization, much faster than that of the second series. The melting points of the first series copolymers are significantly lower than those of the second series. All of the copolyesters reported in this investigation form nematic melts. The initial decomposition temperatures of the copolymers were higher than 450°C. It was confirmed that thermal stability of the homopolyester, PIBPL-1.00, containing the isopropylidene units is significantly improved when compared with that carrying benzylic hydrogens. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2777–2786, 1997     

Thermotropic behavior of aromatic copolyesters based on 3,4′-substituted diphenyl ether

Recently, flexible rod-like monomers based on conformational isomerism have been used to synthesize fully aromatic thermotropic polymers of reduced processing temperature and good thermal stability. 3,4′-Dihydroxy and 3,4′-dicarboxydiphenyl ethers HE and DE, obtained by modified Ullmann condensations between proper hydroxy and bromo derivatives, are investigated as basic components for homo- and copolyesters with the above-mentioned characteristics. Homopolymers from HE and terephthaloyl chloride or DE chloride and 2-methyl (or phenyl) hydroquinone, synthesized by low temperature solution polycondensation, melt to an isotropic fluid; the chain packing is frustrated in the latter by asymmetrical substitution on the aromatic rings, which causes a sequence randomization as well as an increased chain separation. The incorporation of linear rigid units, by partial substitution of the flexible monomers with 1,4 aromatic moieties, leads to thermotropicity, but the critical content of 1,4 units varies with the steric hindrance of the diphenol. Variation of chain rigidity, arising from the chemical structure, composition and sequence distribution, can account for the thermal behavior of the samples and, in particular, for their different abilities to give liquid crystalline behavior.     

Thermotropic aromatic copolyesters of catechol

Three new series of thermotropic aromatic main-chain polymers were synthesized and studied by differential scanning calorimetry and hot-stage polarized microscopy. The polymers were random copolyesters of p-hydroxybenzoic acid (from 60 to 10 mol %), catechol (from 20 to 45 mol %), and one of the following dicarboxylic diacids: terephthalic acid (series 1 ), 2,6-naphtalenedicarboxylic acid (series 2 ), and 1,2-bis-p-carboxyphenoxy ethane (series 3 ). Copolyesters with more than 25 mol % catechol in their structures were soluble in common organic solvents such as chloroform. All the synthesized copolyesters showed hysteresis of the heat capacity at the mesophase glass transition region and nematic mesophases above their T_g's which were stable over very broad ranges of temperature. Copolyesters containing the 2,6-naphtylenedioyl group showed the most stable nematic phases due to the increased anisometry of the 2,6-naphtylenedioyl unit compared to that of the therephthaloyl or the 4-oxybenzoyl units. © 1992 John Wiley & Sons, Inc.     

Thermotropicity of fully aromatic polyesters based on 3,4′-dicarboxydiphenyl ether

3,4′-Substituted aromatic monomers, consisting of two phenylene units joined together by linking groups such as ketone or methylene, have recently been used for the preparation of quasi-rigid fully aromatic thermotropic polymers, based on conformational isomerism, with accessible transition temperatures. In this work the polyester of 3,4′-dicarboxydiphenyl ether and hydroquinone is considered: an Ullmann condensation has been carried out for the preparation of the asymmetric monomer, and low-temperature solution polycondensation has been used to synthesize the polymer. Although a liquid crystalline behavior could be expected, the polyester melts to an isotropic phase. Several copolymers have been prepared, by partially substituting either the asymmetric monomer with terephthalic acid or hydroquinone with different diphenols. The attempt to decrease the stability of the crystalline phase did not lead to significant results. The appearance of the nematic phase in some samples has been attributed to an increased chain stiffness, expressed in terms of persistence length as derived from molecular dynamics (MD) simulations.     

Synthesis and characterization of soluble aromatic polyesters derived from substituted terphenyl and quinquephenyl diols

Rigid aromatic polyesters containing alkoxy or phenyl-substituted oligophenyls were prepared. Soluble polymers were obtained also in cases where phenyl-substituted quinquephenyl diols were combined with asymmetric phenyl-substituted terephthalic acid. The synthesized polyesters were characterized by viscosimetry, gel permeation chromatography, thermal analysis, and dynamic mechanical analysis. The temperature dependence of the intrinsic viscosity was sensitive to the type of side groups. Thermogravimetry has shown that polyesters with aromatic substituents were stable up to 380–400°C. The glass transition temperatures of the polyesters with aromatic side groups were in the 220–260°C range as determined by DSC. Polyesters with hexyloxy side chains show crystallinity. Dynamic mechanical analysis showed that in the cases where aromatic substituents were used to increase solubility, the obtained polymers have very useful mechanical properties at high temperatures. The polymer having the quinquephenyl unit in the main chain has an almost constant modulus up to 340°C. © 1996 John Wiley & Sons, Inc.     

Liquid crystalline epoxy resins by polyaddition of diglycidyl ether of 4,4′-dihydroxybiphenyl and difunctional aromatic compounds

This work is a continuation of the authors' earlier investigations of liquid crystalline epoxy resins prepared from diglycidyl ether of 4,4′-dihydroxybiphenyl (DGE-DHBP), which was used as a mesogenic agent, and aliphatic dicarboxylic compounds, which were used as flexible spacers. In this paper, the synthesis and characterization of liquid crystalline epoxy resins, prepared from DGE-DHBP and difunctional aromatic compounds are described. Three series of liquid crystalline epoxy resins were prepared by chain extension of DGE-DHBP with isomeric hydroxybenzoic and benzenedicarboxylic acids as well as diphenols. An isophthalic-terminated polyether was applied to decrease the temperature of phase transitions. The syntheses were carried out by catalytic polyaddition in the melt. Triphenylphosphine was applied as the catalyst. The resulting epoxy resins were investigated by DSC, polarizing microscope as well as by X-ray and IR spectroscopy. The phase transition temperatures and the type of mesophase of the resulting products depend on the character of the functional groups in the chain extender and on the position of the functional groups in the aromatic ring. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 21–29, 1998     

Liquid crystalline epoxy resins by polyaddition of aliphatic diepoxides with 4,4′-dihydroxybiphenyl

Liquid crystalline epoxy resins were synthesized from 4,4′-dihydroxybiphenyl (DHB), which was used as a mesogenic component, and diglycidyl ethers of aliphatic glycols (ethylene glycol and 1,6-hexanediol) which were used as flexible spacers. The synthesis was carried out by the catalytic polyaddition in the melt. Triphenylphosphine was used as the catalyst. The course of the polyaddition was investigated at various molecular ratios of the reactants. It was found that both linear and branched structures were formed in the course of the synthesis. The rates of the formation of the structures were calculated. The epoxy oligomers were investigated by DSC, polarizing microscope, and x-ray and IR spectroscopy. The molecular weight distribution was determined by GPC. The dependence of liquid crystalline properties of the obtained epoxy resins on the molecular weight and on the chain length of the flexible spacer was investigated. The molecular weight of the epoxy oligomers and the length of flexible spacer influence the phase transition temperatures. © 1995 John Wiley & Sons, Inc.     

Thermally stable liquid crystalline thermosets based on aromatic copolyesters: Preparation and properties

The synthesis and physical properties are described for a thermally stable liquid crystalline (LC) thermoset based on all aromatic ester units. The persistence of the liquid crystalline phase throughout the curing process was monitored with polarizing optical microscopy. The applicability of these new liquid crystalline thermosets has been evaluated for use as an adhesive for bonding metals, namely titanium. The failure of the adhesive bonds always occurs within the polymer; thus it can be inferred that bonding at the polymer-metal interface is very good. This strong interfacial bonding is attributed to low cure shrinkage and CTE matching of the underlying substrate by the LC resins. The cohesive properties and strength of the cured resin can be greatly enhanced by the addition of filler materials. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35:1061–1067, 1997     

Preparation and properties of novel soluble aromatic polyimides from 4,4′-diaminotriphenylamine and aromatic tetracarboxylic dianhydrides

New aromatic polyimides containing triphenylamine unit were prepared by two different methods, i.e., a conventional two-step method starting from 4,4′-diaminotriphenylamine and aromatic tetracarboxylic dianhydrides and the one-step thioanhydride method starting from the aromatic diamine and aromatic tetracarboxylic dithioanhydrides. Both procedures yielded high-molecular-weight polyimides with inherent viscosities of 0.47–1.17 dL/g. Some of these polymers were soluble in organic solvents such as N,N-dimethylacetamide, N-methyl-2-pyrrolidone, m-cresol, and pyridine. All the polyimides afforded transparent, flexible, and tough films, and the color varied from pale yellow to dark red, depending markedly on the tetracarboxylic acid components. The glass transition temperatures (T_gs) of these polyimides were in the range of 287–331°C and the 10% weight loss temperatures were above 520°C in air. The polyimides prepared by the one-step method exhibited better solubility in organic solvents and had somewhat lower T_gs than the polymers prepared by a conventional two-step method.     

Rigid-rod liquid crystalline polyesters based on n-alkoxyterephthalic acid and 4,4′-dihydroxybiphenyl

The synthesis and the characterization of a set of polymers obtained by polycondensation of n-alkoxyterephthalic acid (n = 1, 3, 5, 7) and 4,4′-dihydroxybiphenyl are reported. The n-alkoxy insertion promotes the processability of the material by lowering the melting temperature. All polymers show the nematic phase at about 300°C, almost independently of the length of lateral substituent. The isotropization is not observed up to 450°C, where thermal decomposition occurs. The temperature of glass transition decreases with increasing n, ranging from 170°C (n = 5) to 220°C (n = 1). © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 263–267, 1998     

塑料增强的新途径——热致液晶高聚物的增强作用

评价了热致液晶高聚物作为高性能成型材料的特点。综述了由增强性的热致液晶高聚物和热塑料聚合物基体组成的原位复合材料及其制备、结构和性能。也讨论了今后研究这一塑料增强新途径时要注意的诱导取向和相容性。     

Segmented polyurethanes with 4,4′-bis-(6-hydroxyhexoxy)biphenyl as chain extender. Part 2. Synthesis and properties of MDI-polyurethanes in comparison with 2,4-TDI-polyurethanes

Linear segmented polyurethanes based on poly(butylene adipate)s (PBA) of different molecular weight (M_n 2000, 1000, and 600), 4,4′-diphenylmethane diisocyanate (MDI) and the mesogenic diol 4,4′-bis-(6-hydroxyhexoxy)biphenyl (BHHBP) as well as the unsegmented polyurethane consisting of MDI/BHHBP units have been synthesized and characterized by elemental analysis, ¹³C-NMR and SEC. The thermal behavior and the morphology were studied by DSC, polarizing microscopy, and DMA. The properties of the MDI-polyurethanes were discussed in relation to the BHHBP chain extended 2,4-TDI-polyurethanes and common 1,4-butanediol chain-extended MDI products. MDI polyurethanes based on PBA (M_n 2000) exhibit a glass transition temperature T_g of about −40°C independent of the hard segment content up to ∼50% hard segments. At higher hard segment contents increasing T_gs were observed. Polyurethanes, based on the shorter polyester soft segments PBA (M_n 1000 or 600), reveal an increase in the glass transition temperatures with growing hard segment content. The thermal transitions caused by melting of the MDI/BHHBP hard segment domains are found at 50 K higher temperatures in comparison with the analogous TDI products with mesogenic BHHBP/TDI hard segments. Shortening of the PBA chain length causes a shift of the thermal transitions to lower temperatures. Polarizing microscopy experiments indicate that liquid crystalline behavior is influenced by both the content of mesogenic hard segments and the chain length of the polyester. © 1996 John Wiley & Sons, Inc.     

Synthesis and characterization of wholly aromatic polyesters derived from 1-phenyl-2,6-naphthalene-dicarboxylic acid and aromatic diols

A series of new wholly aromatic polyesters was synthesized by melt polycondensation of 1-phenyl-2,6-naphthalenedicarboxylic acid (PNDA) and diacetates of various aromatic diols. The aromatic diols studied are hydroquinone (HQ), methylhydroquinone (MHQ), phenylhydroquinone (PHQ), (α-phenylisopropyl)hydroquinone (PIHQ), 2,6-naphthalenediol (2,6-ND), 1,4-naphthalenediol (1,4-ND), and 4,4′-biphenol (BP). These polyesters were characterized for their crystallinity, glass transition temperature (T_g), melting temperature (T_m), liquid crystallinity, and thermal stability. In general, crystallinity of the polyesters are very low and the T_g values of the polyesters range from 150 to 172°C depending on the structure of aromatic diols. All of the polymers formed nematic phases above their T_m or T_g. The polyesters derived from PHQ and PIHQ are soluble in chlorinated hydrocarbon solvents. The initial decomposition temperatures of the polyesters are above 400°C under N₂ atmosphere. © 1996 John Wiley & Sons, Inc.     

Fully aromatic thermotropic liquid crystalline homopolyesters of 3,4′-benzophenone dicarboxylic acid

A series of fully aromatic, thermotropic homopolyesters, derived from 3,4′-benzophenone dicarboxylic acid and various aromatic diols, was prepared by the melt polycondensation method and examined for thermotropic behavior by a variety of experimental techniques. The aromatic diols used in the study were hydroquinone, 2,6-, 1,4-, 1,5-, 2,3-, and 2,7-naphthalenediol isomers. All of the homopolyesters of 3,4′-benzophenone dicarboxylic acid with aromatic diols (except that with 2,7-naphthalenediol) formed a nematic LC phase in the melt. They had the glass transition temperatures (T_g) in the range of 133–164°C, the melting transitions (T_m) in the range 305–360°C and the high thermal stabilities (T_d) in the range of 410–483°C. The 2,6-naphthalenediol based homopolymer had the highest T_m (360°C) and the 2,3-naphthalenediol based homopolymer had the lowest T_m (305°C) among all of the homopolymers of naphthalenediol isomers. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of fully aromatic thermotropic liquid‐crystalline copolyesters containing m‐hydroxybenzoic acid units

A series of fully aromatic copolyesters based on p‐acetoxybenzoic acid (p‐ABA), hydroquinone diacetate (HQDA), terephthalic acid (TPA), and m‐acetoxybenzoic acid (m‐ABA) were prepared by a modified melt‐polycondensation reaction. The copolyesters were characterized by DSC, thermogravimetric analysis, ¹H NMR, polarized optical microscopy, X‐ray diffraction, and intrinsic viscosity measurements. The copolyesters exhibited nematic liquid‐crystalline phases in a broad temperature range of about 150 °C, when the content of linear (p‐ABA, HQDA, and TPA) units was over 67 mol %. DSC analysis of the anisotropic copolyesters revealed broad endotherms associated with the nematic phases, and the melting or flow temperatures were found to be in the processable region. The flow temperatures and crystal‐to‐nematic and nematic‐to‐isotropic transitions depend on the type of linear monomer units, and these transitions increased as the content of the p‐ABA units increased, as compared to the HQDA/TPA units. When the content of the p‐ABA units increased, as compared to other linear units (HQDA and TPA), the intrinsic viscosity and degree of crystallinity of the copolyesters also increased, implying a higher reactivity for p‐ABA in the p‐ABA/HQDA/TPA/m‐ABA polymer system. The aromatic region in the ¹H NMR spectra of the copolyesters containing equal molar compositions of p‐ABA, HQDA, and TPA units were sensitive to the sequence distribution of aromatic rings. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3263–3277, 2001