A Mild Isomerization Reaction for β,γ‐Unsaturated Ketone to α,β‐Unsaturated Ketone

A series of β,γ‐unsaturated ketones were isomerized to their corresponding α,β‐unsaturated ketones by the introduction of DABCO in iPrOH at room temperature. The endo‐cyclic double bond (β,γ‐position) on ketone was rearranged to exo‐cyclic double bond (α,β‐position) under the reaction conditions.     

Synthesis of new optically active α,α′,β‐trisubstituted‐β‐lactones as monomers for stereoregular biopolyesters

Various optically active (4R)‐alkyloxycarbonyl‐3,3‐dialkyl‐2‐oxetanones as monomers were synthesized from L‐(S)‐malic acid in six steps to prepare a new family of stereopolyesters for biomedical applications. The synthesis began with an esterification followed of a dialkylation in the aim to introduce hydrophobic groups as methyl or reactive group as allyl. Then, a saponification has permitted to obtain the corresponding diacids that reacted with appropriate alcohols to furnish different monoesters. The last and most important step was activation of hydroxyl group of monoesters with the asymmetric carbon configuration inversion according to the Mitsunobu reaction. Thus, this reaction has provided lactones from monoesters with 100% enantiomeric excess which was confirmed by ¹H NMR and by the synthesis of corresponding isotactic and semicrystalline homopolyesters. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2586–2597     

Synthesis of α,β-unsaturated ketone from α-iodo ketone using photoirradiation

Irradiation of α-iodo ketone in hexane under a nitrogen atmosphere with a high-pressure mercury lamp (λ>300nm) at room temperature afforded the corresponding α,β-unsaturated ketones in good yield. This reaction affords a new, clean and convenient synthetic method for the α,β-unsaturated ketone.     

Synthesis of Phenanthrene Derivatives through the Reaction of an α,α‐Dicyanoolefin with α,β‐Unsaturated Carbonyl Compounds

Phenanthrene derivatives were prepared by reacting an α,α‐dicyanoolefin with different α,β‐unsaturated carbonyl compounds resulting from Wittig reaction of ninhydrin and phosphanylidene or condensation of barbituric acid and an aldehyde. The easy procedure, mild and metal‐catalyst free, reaction conditions, good yields, and no need for chromatographic purifications are important features of this protocol. The structures of the product of type 3 and 5 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS). A plausible mechanism for this type of reaction is proposed (Scheme 1).     

Comparison of Methionine α,γ‐Lyase and Homocysteine α,γ‐Lyase for Electrochemical Determination of Homocysteine

Recently, a novel enzymatic method was developed for determination of homocysteine. This method utilizes the electrochemical hydrogen sulfide sensor along with methionine α,γ‐lyase to accomplish the fast, accurate, sensitive and selective measurements. As a continuation of this work, another enzyme, homocysteine α,γ‐lyase, was used and the parallel experiments of using both enzymes were carried out against the effect of pH, sensitivity, linearity, and interferences, in an intended comparison between these two enzymes. The excellent linearity of amperometric currents against homocysteine concentrations, high sensitivities and low detection limits for both enzymes reconfirmed that the electrochemical method is superior over other analytical means. The high enzymatic activity of methionine α,γ‐lyase surpassing homocysteine α,γ‐lyase endowed the former higher sensitivity, lower detection limit and faster response than the latter, suggesting methionine α,γ‐lyase a better candidate for homocysteine measurement by electrochemical method. The differences between these two enzymes on the trends of response time and sensitivity at different pH environments, reactivity toward several forms of homocysteine as well as on the interference from several agents were also addressed and discussed.     

Photoinduced transformation of α,β-epoxyketones to β-hydroxyketones by Hantzsch 1,4-dihydropyridine

Irradiation (λ >300 nm) of Hantzsch 1,4-dihydropyridine with aromatic α,β-epoxyketones in acetonitrile selectively breaks the Cα---O bond of the epoxides giving the corresponding β-hydroxyketones in excellent yields.     

Studies on the Mass Spectra of N‐Aryl α,β‐Unsaturated γ‐Lactams

The mass spectra of a series of N‐aryl α,β‐unsaturated γ‐lactams were studied. Besides the molecular ion, the three characteristic fragments such as [M⁺‐29], [M⁺‐55], and [M⁺‐82] were commonly found in a series of N‐Aryl α,β‐unsaturated γ‐lactams in EI/MS. Further more the mechanism for the interpretation of these fragments is also de scribed.     

Synthesis of β‐Haloketones by β‐Addition Reactions of α,β‐Unsaturated Ketones with BX3 (X = Br,Cl) as Halide Source

A series of β‐bromoketones and β‐chloroketones were synthesized by the addition reactions of α,β‐unsaturated ketones under BX₃ (X = Br, Cl) and ethylene glycol reaction system. The α,β‐unsaturated ester also was successfully converted to its corresponding β‐bromoester under the reaction condition.     

Cationic polymerization of γ-methyl- and α-methylphenylallene

The cationic polymerizations of γ-methylphenylallene ( 1 ) and α-methylphenylallene ( 2 ) were carried out with some Lewis acids at 25 and 0°C in dichloromethane to obtain the corresponding polymers through allyl cations, respectively. Tin (IV) chloride was found to be an effective catalyst for the cationic polymerization of both allenes 1 and 2 compared with other Lewis acids. Thus, in the polymerization of 1 , methanol-insoluble polymer was only obtained using Tin (IV) chloride, and M?_n of methanol-insoluble polymer obtained by Tin (IV) chloride was the highest in the polymerization of 2 . From the analysis of ¹H- and ¹³C-NMR spectra of the obtained polymers, the polymer from 1 consisted of two kinds of units polymerized by each double bonds of allene 1 , whereas the polymer from 2 consisted of only one unit polymerized by terminal double bond of allene 2 . Moreover, effect of solvent on the cationic polymerizations of 1 and 2 were discussed.     

Synthesis of novel α,α′,β-trisubstituted β-lactones

A concise and efficient synthesis of α,α′,β-trisubstituted β-lactones is presented. These novel lactones are easily obtained in five steps and will be dedicated to anionic ring opening polymerization.     

Synthesis of Halogenated α,β‐Unsaturated γ‐Butyrolactone Derivatives by Triphenylphosphine‐Catalyzed Cyclization of α‐Halogeno Ketones with Dialkyl Acetylenedicarboxylates (=Dialkyl But‐2‐ynedioates)

A Ph₃P‐catalyzed cyclization of α‐halogeno ketones 2 with dialkyl acetylenedicarboxylates (=dialkyl but‐2‐ynedioates) 3 produced halogenated α,β‐unsaturated γ‐butyrolactone derivatives 4 in good yields (Scheme 1, Table). The presence of electron‐withdrawing groups such as halogen atoms at the α‐position of the ketones was necessary in this reaction. Cyclization of α‐chloro ketones resulted in higher yields than that of the corresponding α‐bromo ketones. Dihalogeno ketones similarly afforded the expected γ‐butyrolactone derivatives in high yields.     

Organocatalytic Enantioselective Synthesis of Tetrasubstituted α‐Amino Allenoates by Dearomative γ‐Addition of 2,3‐Disubstituted Indoles to β,γ‐Alkynyl‐α‐imino Esters

The first asymmetric synthesis of tetrasubstituted α‐amino allenoates by a chiral phosphoric acid catalyzed dearomative γ‐addition reaction of 2,3‐disubstituted indoles to β,γ‐alkynyl‐α‐imino esters is reported. This method provides access to a series of highly functionalized tetrasubstituted allenes featuring quaternary stereocenters in high yields, and with excellent regio‐, diastereo‐, and enantioselectivities under mild conditions without by‐product formation. Representative large‐scale reactions and diverse transformations of the products into various scaffolds with potential biological activities render are also disclosed. The mechanism of the reaction was elucidated by control reactions and DFT calculations.     

Synthesis of propyl O-(α-L-rhamnopyranosyl)-(1→3)-[2,4-di-O-(2s-methylbutyryl)-α-L-rhamnopyranosyl]-(1→2)=(3-O-acetyl-β-D-glucopyranosyl)-(1→2)-βp-D-fucopyranoside,the tetrasaccharide moiety of Tricolorin A

Propyl O-(α-L-rhamnopyranosyl)-(1→3)-[2,4di-O-(2s-methylbutyryl)-α-L-rhamnopyranosyl]-(1→2)-(3-O-acetyl-β-glucopyranosyl)-(1→2)-β-D-fucopyranoside (1), the tetrasaccharide moiety of Ricolorin A, was synthesized in total 23 steps with a longest linear sequence of 10 steps, and overall yield of 3.7% from D-Glucose. The isomerization of the dioxolane-type benzylidene in the prance of NIS/AgOTf was observed. Tetrasaccharide 1 exhibited no activity against the cultured P388 cell as Tricolorin A did.     

Palladium‐Catalyzed Carbonylative α‐Arylation to β‐Ketonitriles

A carbonylative α‐arylation process employing unactivated nitriles for the first time is described. The reaction tolerates a range of (hetero)aryl iodides and several nitrile coupling partners. No prefunctionalization of the nitriles is necessary and the resulting β‐ketonitriles are obtained in good to excellent yields. The methodology also allows for a convenient ¹³C‐labelling of the generated carbonyl moiety.     

A novel method for the synthesis of (Z)-α-selenyl-α,β-unsaturated ketones via acylation of (E)-α-selanylvinylstannanes

The (E)-α-selenylvinylstannanes react with acyl halides in presence of a catalytic amount of Pd(PPh₃)₄ to give the corresponding (Z)-α-selenyl-α,β-unsaturated ketones in good yield.     

TBAF‐Mediated Dimerization Reaction of β,γ‐Unsaturated Arylketones

A simple and high‐yield method for the synthesis of several 1,5‐diaryl‐1,5‐dicarbonyl compounds has been established starting from TBAF‐mediated isomerization and dimerization reaction of β,γ‐unsaturated arylketones (allyl arylketones) with mono‐, di‐, and tri‐methoxy groups, which is derived from allylation of commercially available different benzaldehydes and followed by oxidation of the resulting secondary alcohols.     

The Renaissance of α‐Methylene‐γ‐butyrolactones: New Synthetic Approaches

The amount of research activity concerning α‐methylene‐γ‐butyrolactones and α‐alkylidene‐γ‐butyrolactones has increased dramatically in recent years. This Review summarizes the structural types, biological activities, and biosynthesis of these compounds, concentrating on publications from the past 10 years. Traditional approaches to α‐methylene‐γ‐butyrolactones and α‐alkylidene‐γ‐butyrolactones are then reviewed together with novel approaches, including those from our own research group, reported more recently.     

Preparation,characterization and properties of β-chitin and N-acetylated β-chitin

Free amino groups in β-chitin from squid pen were acetylated to obtain N-acetylated β-chitin. After careful control of degree of acetylation, thermal and mechanical properties of β-chitin and N-acetylated β-chitin were compared. The structural differences of β-chitin and N-acetylated β-chitin were characterized by Fourier transform infrared (FTIR) and wide-angle x-ray diffraction (WAXD) analysis. The results indicated that the crystallinity of N-acetylated β-chitin was higher than that of β-chitin and N-acetylated β-chitin exhibited characteristics similar to α-chitin. Equilibrium water content (EWC) of β-chitin reached to about 50% and this hydrophilic nature was assumed to be caused by a relatively weak hydrogen bonding force of β-chitin with parallel main chains. On the other hand, EWC of N-acetylated β-chitin was 40% due to the introduction of ordered structure. β-chitin and N-acetylated β-chitin have the tensile strength of 0.4 and 0.7 Mpa in the swollen state, respectively. Viscoelastic properties and thermal relaxation behaviors were investigated by dynamic mechanical thermal analysis (DMTA). DMTA spectra of these samples showed that α-transition peaks of β-chitin and N-acetylated β-chitin were observed at 170 and 190°C, respectively. These relaxation peak maxima were assigned to be their glass transition temperature. In addition, a second relaxation peak of β-chitin resulting from acetamide groups was found at 112°C and a broad relaxation peak of N-acetylated β-chitin at around 81–100°C. As a result of thermogravimetric analysis, 10% weight loss temperatures of β-chitin and N-acetylated β-chitin were 270 and 285°C, respectively. © 1996 John Wiley & Sons, Inc.