Poly-as-triazines

Two high molecular weight (η_inh > 1.0) soluble poly-as-triazines have been prepared by the solution polycondensation in m-cresol of 2,6-pyridinediyl dihydrazidine with p,p′-oxybis(phenyleneglyoxal hydrate) and with p,p′-oxydibenzil. Thermal characterization of the poly-as-triazines by TGA showed polymer decomposition temperatures of ～400°C after a 300°C cure in argon. Poly-as-triazines exhibited weight losses <8% after aging in static air at 316°C for 200 hr. Clear yellow films cast for m-cresol solutions exhibited good flexibility and toughness even after aging at 316°C for 200 hr in air and after refluxing in 10% aqueous potassium hydroxide solution for 24 hr.     

Synthesis of aromatic polythioamide-oxothioxoquinazolines from bis(1,3,4-thiadiazoline-5-thione) and aromatic bis-o-amino esters

Aromatic polythioamide-oxothioxoquinazolines were synthesized by the polycondensation of 2,2′-(m-phenylene)bis-1,3,4-thiadiazoline-5-thione with aromatic bis-o-amino esters. The polymerizations were carried out at 160°C in acidic media such as m-cresol, sulfolane, and polyphosphoric acid to produce polymers with reduced viscosities up to 0.5 dL/g. These polymers were soluble in polar aprotic solvents like N-methyl-2-pyrrolidone and some acidic media including m-cresol. The polythioamide-oxothioxoquinazolines showed relatively good thermal stability with 10% weight loss at 344–394°C in air.     

Synthesis of aromatic polyamide-phthalimidines from chloroformylphthalides and aromatic diamines

New polymer-forming monomers, 3-benzylidene-5-chloroformylphthalide and 3-benzylidene-6-chloroformylphthalide, were synthesized by the Perkin reaction of trimellitic anhydride with phenylacetic acid, followed by chlorination. The polycondensation of these monomers with aromatic diamines in N-methyl-2-pyrrolidone at 200°C afforded aromatic polyamide-phthalimidines having inherent viscosities of 0.2-0.5 dL/g. All the polymers were readily soluble in m-cresol, pyridine, dimethylformamide, and dimethyl sulfoxide. Glass transition temperatures of some of the polymers were in the range of 255–282°C. The polyamide-phthalimidines began to lose weight at around 300°C in both air and nitrogen atmospheres, with 10% weight losses being recorded at 435–475°C in nitrogen by thermogravimetry.     

Synthesis and characterization of novel aromatic polyamides from 3,4-bis(4-aminophenyl)-2,5-diphenylfuran and aromatic diacid chlorides

A new highly phenylated heterocyclic diamine, 3,4-bis(4-aminophenyl)-2,5-diphenylfuran, was synthesized in three steps from 4–-nitrodeoxybenzoin. The low temperature solution polycondensation of the diamine with various aromatic diacid chlorides afforded tetraphenylfuran-containing aromatic polyamides with inherent viscosities of 0.2–0.8 dL/g. Copolyterephthalamides were obtained from the diamine and 4,4′-oxydianiline. The polyamides were generally soluble in a wide range of solvents that included N,N-dimethylacetamide, N-methyl-2-pyrrolidone, pyridine, and m-cresol. Glass transition temperatures of the polyamides and copolyamides ranged from 302–342°C, and 10% weight loss was observed above 480°C in nitrogen.     

Synthesis and characterization of phenyl-pendant aromatic polythiazoles from bis-α-bromophenylacetyl compounds and dithioamides

Novel phenyl-pendant aromatic polythiazoles having inherent viscosities of 0.3–1.3 dL/g were synthesized by the solution polycondensation of bis[4-(α-bromophenylacetyl)phenyl] ether with aromatic dithioamides or dithiooxamide in dimethylformamide at 60°C. The polythiazole having m-phenylene linkage was readily soluble in chloroform and m-cresol, and transparent flexible film could be cast from the chloroform solution. Glass transition temperatures of these polythiazoles were in the range of 210–250°C. They started to decompose at about 500°C in air with 10% weight loss being recorded at around 570°C.     

Preparation and properties of polyarylates from 5-t-butylisophthaloyl chloride and various bisphenols

Polyarylates containing a t-butyl pendant group were prepared from 5-t-butylisophthaloyl chloride and various bisphenols through the phase-transfer catalyzed two-phase polycondensation. The polyarylates having inherent viscosities up to 3.1 dL/g were obtained quantitatively. They were readily soluble in various solvents such as chloroform, m-cresol, and pyridine. Coloreless, transparent, and flexible films could be cast from the chloroform solutions of the polymers. The polyarylates had glass transition temperatures between 210 and 320°C, and did not lose weight below 350°C, with 10% weight loss being recorded at 395–450°C in air.     

Phenylated imide–quinoxaline copolymers

Phenylated, ordered imide–quinoxaline copolymers of high oxidative-thermal stability were prepared by one-step solution condensation of aromatic tetraamines with N,N′-bis(4-benzilyl)pyromellitimide. Polymerization in m-cresol leads to high molecular weight polymers that remain soluble. Thermal gravimetric analysis and isothermal decomposition at 400°C shows that these polymers are as stable as polyimides or polyquinoxalines. The polymer decomposition temperatures range between 495 and 550°C, depending upon structure. Also, the rate of isothermal decomposition at 400°C in air showed a strong dependency of weight loss on structure. Tough films were cast from solution.     

Synthesis of polypyridazinophthalazinediones from dibenzoylphthalic acids and aromatic dihydrazines

A novel class of polypyridazinophthalazinediones has been synthesized by the solution cyclopolycondensation in m-cresol of dibenzoylphthalic acids with aromatic dihydrazines such as bis(4-hydrazinophenyl)methane and bis(4-hydrazinophenyl) sulfone. The polyheterocycles derived from 4,6-dibenzoylisophthalic acid, which had inherent viscosities of up to 0.5, were soluble in m-cresol and hot dichloroacetic acid, whereas the polymers from 2,5-dibenzoylterephthalic acid were practically insoluble in organic solvents. Thermogravimetric analyses showed that all the polymers underwent weight losses of 10% at 490–520°C in both air and nitrogen.     

Synthesis and characterization of 1,3,4-oxadiazole-containing polyazomethines

Novel 1,3,4-oxadiazole-containing polyazomethines were synthesized by the polycondensation of diamines, 2,5-bis (m-aminophenyl)-1,3,4-oxadiazole (BMAO) and 2,5-bis (p-aminophenyl)-1,3,4-oxadiazole (BPAO), with aromatic dialdehydes, isophthalaldehyde and terephthalaldehyde, in m-cresol at 20°C. These polymers were yellow to orange in color and had reduced viscosities up to 1.13 dL/g and electric conductivity as high as 10^?11?10^?12 S cm^?1. All the polyazomethines were insoluble in common organic solvents but dissolved in concentrated sulfuric acid. Thermogravimetry showed that thermal degradation started at around 400°C in air and nitrogen atmospheres. Doping with iodine markedly increased the conductivity and produced the black-colored semiconductive polyazomethines with a maximum conductivity of the order of 10^?6 S cm^?1. Electronic spectra of the undoped polymers indicated a large bathochromic shift of the absorption maxima due to C?N bonds of the monomer diamines (285 nm for BMAO and 315 nm for BPAO). This suggests that π-electrons of the polymers are extensively delocalized along the main chain.     

Synthesis of polypyridazinophthalazinediones from diacetylphthalic acids and aromatic dihydrazines

The cyclopolycondensation of two diacetylphthalic acids with aromatic dihydrazines produced a series of new high-molecular-weight polypyridazinophthalazinediones with pendant methyl groups. The polymers were best prepared in m-cresol at 100°C and, after isolation, were readily soluble in dichloroacetic acid and m-cresol. Clear yellow films could be cast from m-cresol solutions and thermogravimetric analysis of all the polymers showed a 10% weight loss at 455–;505°C in nitrogen.     

Syntheses of polyamides and polypyrrolones from 2,2′-disubstituted bis(3-buten-4-olides) and diamines

The ring-opening polyaddition of 2,2′-disubstituted bis(3-buten-4-olides) with aliphatic diamines in m-cresol at room temperature afforded in quantitative yields polyamides with a pendant ketone moiety having inherent viscosities of up to 0.7. On the other hand, the polymerization in m-cresol at 80°C with acidic catalysts and at 160°C without any catalyst yielded directly polypyrrolones, a novel class of polyheterocycles. The cyclodehydration of the open-chain polyamides to polypyrrolones was also achieved by simply treating the polyamide films with methanolic hydrochloric acid at room temperature. Both of the polymers were generally soluble in hot polar solvents such as dimethylformamide, m-cresol, and nitrobenzene. The polypyrrolones began to lose weight gradually at around 250°C in nitrogen as determined by thermogravimetric analysis, while the thermograms in air showed an appreciable weight increase at about 230°C.     

Preparation and properties of polyarylates both from 2,2′-bibenzoyl chloride and bisphenols and from biphenyl-2,2′-diol and aromatic dicarboxylic acid chlorides

Polyarylates having inherent viscosities up to 1.02 dL/g were synthesized both by the phase-transfer catalyzed two-phase polycondensation of 2,2′-bibenzoyl chloride with various bisphenols and by the high-temperature solution polycondensation of biphenyl-2,2′-diol with aromatic dicarboxylic acid chlorides. All the polyarylates were amorphous and soluble in a variety of organic solvents including N,N-dimethylformamide, N-methyl–2-pyrrolidone, chloroform, m-cresol, and pyridine. Transparent and flexible films of these polymers could be cast from the chloroform solutions. These polyarylates had glass transition temperatures in the range of 120–250°C and began to lose weight at around 380°C in air. © 1992 John Wiley & Sons, Inc.     

Polyimides derived from 1,2-bis(4-aminophenoxy)propane

The diamine 1,2-bis(4-aminophenoxy)propane, containing the flexible 1,4-dioxa-2-methylbutyl-ene unit, was synthesized. Polyimidization was carried out with 5,5′-[2,2,2-trifluoro-(trifluoromethyl)ethylidine]bis-1,3-isobenzofurandione in m-cresol employing toluene as azeotroping agent to yield a polyimide that was soluble in a variety of solvents and had an inherent viscosity of 0.84 dL/g in N,N-dimethylformamide. Poly(amic acid) formation with pyromellitic dianhydride, 4,4′-carbonyldiphthalic anhydride, and 5,5′-[ethanediylbis(oxy)]-bis-1,3-isobenzofurandione was carried out in N,N-dimethylformamide with imidization completed by heating at 160°C for 24 h under vacuum. All of the polyimides exhibited a 5% weight loss in air and in helium by 420°C.     

Preparation and properties of aromatic polyamides and copolyamides from phenylindanedicarboxylic acid and aromatic diamines

Aromatic polyamides (aramids) having inherent viscosities of 0.5–1.10 dL/g were prepared by the direct polycondensation of 1,1,3-trimethyl-3-(4-carboxyphenyl)indane-5-carboxylic acid with various aromatic diamines using triphenyl phosphite and pyridine as the condensing agents. Copolyamides were also prepared by a similar procedure from a mixture of the phenylindane diacid, terephthalic acid, and p-phenylenediamine. Almost all of the aramids were soluble in a variety of solvents such as N-methyl-2-pyrrolidone, pyridine, and m-cresol, and afforded transparent and tough films by the solution casting. These aramids and copolyamides had glass transition temperatures in the range of 290–355°C, and started to lose weight at 340°C in air.     

Synthesis and characterization of 1,3,4-thiadiazole-containing polyazomethines and copolyazomethines

Novel 1,3,4-thiadiazole-containing polyazomethines and copolyazomethines were synthesized by the solution polycondensation, in m-cresol at 25°C, of aromatic dialdehydes, isophthalaldehyde and terephthalaldehyde, with 2,5-bis (m-aminophenyl)-1,3,4-thiadiazole (BMAT) and with BMAT and aromatic diamines, bis (4-aminophenyl) ether and 1,5-diaminonaphthalene, respectively. These polymers were tan yellow to yellow in color and had reduced viscosities up to 0.32 dL/g in concentrated sulfuric acid and electric conductivity as high as 10^?9?10^?11 S cm^?1 at 25°C. All the polymers were insoluble in common organic solvents but dissolved completely in concentrated sulfuric acid and formic acid. However, they were readily hydrolyzed in concentrated sulfuric acid. X-ray diffraction diagrams showed that the crystallinity of polyazomethines were low, but copolyazomethines were highly crystalline. These azomethine polymers are highly thermally and thermooxidativelly stable and exhibited no appreciable decomposition up to 400°C in both air and nitrogen atmospheres. Doping with iodine dramatically raised the conductivity and produced the dark brown- to completely black-colored semiconductive polymers with a maximum conductivity of the order of 10^?5 S cm^?1. Electronic spectra of the undoped polymers indicated a large bathochromic shift of the π?π^* absorption band (310 nm) due to C?N bonds of BMAT. This result suggests that π-electrons of the polymers are extensively delocalized along the main chain.     

Polyimides containing nonaromatic nitrogen linkages

Two diamines, 2,5-bis (4-aminophenyl)-2,5-diazahexane and 1,4-bis (4-aminophenyl)-1,4-diazacyclohexane were chosen as components for polyimidizations because they have melting points that differ by nearly 200°C (66–67 and 229–230°C, respectively) and are relatives of p-nitro-N,N-dimethylaniline. The melting points of the model compounds (phthalic anhydride) do not differ by as much as those of the free amines [303–304 and 386°C (DSC), respectively]. Six polyimides were prepared by a two-step polycondensation of the diamines with pyromellitic dianhydride, benzophenonetetracarboxylic dianhydride, and 5,5'-[2,2,2-trifluoro-1-(trifluoromethyl) ethylidene] bis-1,3-isobenzofurandione. DSC thermograms failed to indicate any distinct transitions up to 450°C, however, the polyimide prepared from 2,5-bis (4-aminophenyl)-2,5-diazahexane and pyromellitic dianhydride shows a slight break in its DSC curve at 233°C.     

Preparation and properties of aromatic polyesters and copolyesters containing phenylindane unit

Aromatic polysters and copolyesters of high molecular weights with phenylindane units were prepared from combinations of 3-(4-hydroxyphenyl)-1,1,3-trimethyl-5-indanol and bisphenol A with isophthaloyl and terephthaloyl chloride by two-phase polycondensation in a nitrobenzene-water system with various phase-transfer catalysts. The phenylindane-containing polyesters and copolyesters were amorphous and readily soluble in a wide range of solvents that included chloroform, m-cresol, tetrahydrofuran, and dimethylformamide. The glass transition temperatures of the phenylindane-derived polyisophthalate and polyterephthalate were 235 and 253°C, respectively, which were higher than those of the corresponding bisphenol A analogs by some 50°C. These polymers began to lose weight around 400°C in air and nitrogen atmospheres.     

Synthesis and properties of new soluble N-phenyl–substituted aromatic-aliphatic and all aromatic polyamides derived from 4,4′-dianilinobiphenyl

New N-phenylated aromatic-aliphatic and all aromatic polyamides were prepared by the high-temperature solution polycondensation of 4,4′-dianilinobiphenyl with both aliphatic (methylene chain lengths of 6–11) and aromatic dicarboxylic acid chlorides. All of the aromatic-aliphatic polyamides and the wholly aromatic polyamides exhibited an amorphous nature and good solubility in amide-type and chlorinated hydrocarbon solvents, except for those aromatic polyamides containing p-oriented phenylene or biphenylylene linkages in the backbone; the latter were crystalline and insoluble in organic solvents except m-cresol. The N-phenylated aromatic-aliphatic polyamides and aromatic polyamides had glass transition temperatures in the range of 79–116°C and 207–255°C, respectively, and all the polymers were thermally stable with decomposition temperatures above 400°C in air. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2193–2200, 1998     

Synthesis of benzylidene-pendant polyphthalimidines from flexible bisphthalides and various diamines

New polyphthalimidine-forming monomers, 5,5′-(oxydi-p-phenylenedicarbonyl)bis(3-benzylidenephthalide) and the 6,6′-derivative, were synthesized by the Friedel–Crafts reaction of diphenyl ether with 5- and 6-chloroformyl-3-benzylidenephthalide, respectively. The direct polycondensation of these bisphthalides with both aliphatic and aromatic diamines in o-phenylphenol at 200–250°C afforded polyphthalimidines having inherent viscosities of 0.2–1.2 dL/g in almost quantitative yields. Syntheses of aliphatic polyphthalimidines with higher inherent viscosities were also achieved by a two-step procedure involving ring-opening polyaddition and subsequent thermal cyclodehydration. All the polymers were amorphous and readily soluble in N-methyl-2-pyrrolidone (NMP), m-cresol, nitrobenzene, pyridine, and chloroform. Tough and flexible films could be cast from NMP solutions of the polymers. Glass transition temperatures of the polyphthalimidines were in the range of 158–246°C. The thermogravimetry of the aromatic polymers showed 10% weight loss in air and nitrogen at 445–515 and 500–520°C, respectively. The crosslinking reaction of some benzylidenependant polyphthalimidines took place at 300°C through double-bond addition to afford cured polymers with improved thermal stability.     

Poly(enamine-ketones) from hydrogen-terminated aromatic dipropynones and aromatic diamines

Poly(enamine-ketones) were prepared by the nucleophilic (Michael-type) addition of various aromatic diamines to 1,1′-(1,3- or 1,4-phenylene)bis(2-propyn-1-one)(1,3 or 1,4-PPO) in m-cresol at 5–23°C. The low molecular weight polymers (inherent viscosity of 0.25 dL/g) exhibited limited solubility in organic solvents. Glass transition temperatures were generally undetectable by differential scanning calorimetry while polymer decomposition temperatures (10% weight loss), as measured by thermogravimetric analysis, were observed from 355 to 419°C. Polymers prepared from 1,4-PPO were semi-crystalline as shown by wide-angle X-ray diffraction. The poly(enamine-ketone) structure was confirmed by matching infrared spectral characteristics of the polymers with those of well-characterized model enamine ketones.