Solvent effects on the free‐radical copolymerization of styrene with butyl acrylate. I. Monomer reactivity ratios

The free‐radical copolymerization of styrene with butyl acrylate was carried out in benzene and benzonitrile at 50°C. Differences between the apparent reactivity ratios determined in this work and those previously reported in bulk indicated noticeable solvent effects. This is explained by a qualitative bootstrap effect. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 60–67, 2000     

Preparation and reactivity of metal containing monomers

The preparation of HTSC ceramics based on Y^III and Bi^III was studied. The polymers were obtained by two methods: by the reaction of preliminarily synthesized polyacrylic acid (PAA) or polyacrylamide (PAAm) with Y^III, Ba^II, and Cu^II nitrates or by copolymerization of metal containing monomers (metal (Y^II, Ba^II, and Cu^II) acrylates or acrylamide complexes of metal (Bi^III, Ca^II, Sr^II, Pb^II, and Cu^II) nitrates). The copolymerization was carried out in solution, in the solid phase, or using spontaneous polymerization, which has been previously discovered by the authors. The properties of the HTSC ceramics obtained are improved when the products of copolymerization of metal containing monomers are used.For part 41, seeIzv. Akad. Nauk, Ser. Khim., 1995, 885 [Russ. Chem. Bull., 1995,44, 858 (Engl. Transl.)].Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1096–1101, June, 1995.The authors wish to thank V. N. Topnikov and M. K. Makova for measuring the characteristics of HTSC ceramics and V. A. Zhorin for conducting copolymerization of metal containing monomers under high pressures combined with shear strains.The work was carried out with financial support of the International Science Foundation (Grant NJB 000).     

Effect of the substituents on radical copolymerization of dialkyl fumarates with some vinyl monomers

Radical copolymerization of dialkyl fumarates (DRF) with various vinyl monomers was carried out in benzene at 60°C. The monomer reactivity ratios, r₁ and r₂, were determined from the comonomer-copolymer composition curves. The relative reactivity of DRFs with various ester substituents toward a polystyryl radical was revealed to depend on both steric and polar effects of the ester groups. It has also been clarified that α-substituents of the polymer radical have a significant role in addition of DRF, from the comparison of the monomer reactivity ratios determined in copolymerizations with monosubstituted and 1,1-disubstituted ethylenes. The absolute cross-propagation rate constants were also evaluated and discussed. © 1992 John Wiley & Sons, Inc.     

Determination of the reactivity ratios of methyl acrylate with the vinyl acetate,vinyl 2,2-dimethyl-propanoate,and vinyl 2-ethylhexanoate

The course of composition drift in copolymerization reactions is determined by reactivity ratios of the contributing monomers. Since polymer properties are directly correlated with the resulting chemical composition distribution, reactivity ratios are of paramount importance. Furthermore, obtaining correct reactivity ratios is a prerequisite for good model predictions. For vinyl acetate (VAc), vinyl 2,2-dimethyl-propanoate also known as vinyl pivalate (VPV), and vinyl 2-ethylhexanoate (V2EH), the reactivity ratios with methyl acrylate (MA) have been determined by means of low conversion bulk polymerization. The mol fraction of MA in the resulting copolymer was determined by ¹H-NMR. Nonlinear optimization on the thus-obtained monomer feed–copolymer composition data resulted in the following sets of reactivity ratios: r_MA = 6.9 ± 1.4 and r_VAc = 0.013 ± 0.02; r_MA = 5.5 ± 1.2 and r_VPV = 0.017 ± 0.035; r_MA = 6.9 ± 2.7 and r_V2EH = 0.093 ± 0.23. As a result of the similar and overlapping reactivity data of the three methyl acrylate–vinyl ester monomer systems, for practical puposes these data can be described with one set of reactivity data. Nonlinear optimization of all monomer feed–copolymer composition data together resulted in r_MA = 6.1 ± 0.6 and r_VEst = 0.0087 ± 0.023. © 1994 John Wiley & Sons, Inc.     

Bulk Free‐Radical Copolymerization of n‐Butyl Acrylate and n‐Butyl Methacrylate: Reactivity Ratio Estimation

The reactivity ratios for the bulk free‐radical copolymerization of n‐butyl acrylate (BA)/n‐butyl methacrylate (BMA) are estimated at 80 °C. By performing a series of low conversion runs including replicate runs, the reactivity ratios are estimated as r_BA = 0.460 and r_BMA = 2.008. Runs to high conversions are then conducted at three different feed compositions (f_BMA = 0.2, 0.5, and 0.8) to validate the reactivity ratios. The composition data from the high conversion experiments show good agreement with the estimated reactivity ratios in the integrated form of the Mayo–Lewis model. The molecular weight, gel content, and glass transition temperature of BA/BMA copolymers are also determined.

     

Preparation of amphiphilic statistical copolymers of 2‐hydroxyethyl methacrylate with 2‐diethylaminoethyl methacrylate,precursors of water‐soluble copolymers

Statistical copolymers of 2‐hydroxyethyl methacrylate (HEMA) and 2‐diethylaminoethyl methacrylate (DEA) were synthesized at 50 °C by free‐radical copolymerization in bulk and in a 3 mol L^?1 N,N′‐dimethylformamide solution with 2,2′‐azobisisobutyronitrile as an initiator. The solvent effect on the apparent monomer reactivity ratios was attributed to the different aggregation states of HEMA monomer in the different solvents. The copolymers obtained were water‐insoluble at a neutral pH but soluble in an acidic medium when the molar fraction of the DEA content was higher than 0.5. The quaternization of DEA residues increased the hydrophilic character of the copolymers, and they became water‐soluble at a neutral pH when the HEMA content was lower than 0.25. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2427–2434, 2002     

Kinetic Studies on the Copolymerization of Acrylonitrile and Itaconic Acid in Dimethylsulfoxide

The free radical copolymerization of acrylonitrile (AN) with itaconic acid (IA) in dimethylsulfoxide (DMSO) initiated by azobisisobutyronitrile (AIBN) has been found to be chemically controlled even at high conversion. In order to explain this specific finding by Walling's kinetic model, a detailed study on the monomer reactivity ratios (MMRs), decomposition kinetics of AIBN and homopolymerization kinetics of AN was carried out in DMSO from 50 to 80°C. The results suggest that the reactivity ratio of IA is less than unity and always larger than that of AN. Thus, the reaction has an ideal copolymerization behavior when the temperature is increased. It is also found that decomposition of AIBN in DMSO is strictly first order and the decomposition rate constants (k _d) determined by nitrogen evolution technique are acceptable. k_p /k ^0.5 _t ratios of AN were estimated from the off-line conversion data under various monomer and initiator concentration. Additionally, the temperature dependences on MRRs, k _d and k_p /k ^0.5 _t were believed to follow the Arrhenius's law very well.     

Random copolycondensation of isophthalic acid/terephthalic acid with bisphenols by tosyl chloride/dimethylformamide/pyridine in terms of the monomer reactivity ratios of bisphenols

The random copolycondensation of isophthalic acid/terephthalic acid with various combinations of bisphenols (M₁ and M₂) with a tosyl chloride/dimethylformamide/pyridine condensing agent was carried out to investigate the effects of the monomer reactivity ratios, r₁′ and r₂′, on the reaction, like r₁ and r₂ in radical copolymerization. The ratios were calculated from the probabilities of finding an M₂ unit next to an M₁ unit and of finding an M₁ unit next to an M₂ unit, which were determined by an NMR analysis of the resultant copolymers. They were discussed with respect to the inherent viscosities (molecular weights) of the resultant copolymers. There was a fairly good relationship between r₁′ and r₂′ and the inherent viscosity values of the copolymers, indicating that copolycondensation could be facilitated by a combination of bisphenols; the lowering of r₁′ and r₂′ was indicative of random distributions in the copolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3908–3915, 2003     

Interpretation of reactivity in radical polymerization—Radicals,monomers, and transfer agents: Beyond the Q‐e scheme

50 years ago, Alfrey and Price advanced the Q‐e scheme for the interpretation of radical and monomer reactivity and the prediction of monomer reactivity ratios in radical copolymerization. Despite the early criticism of the scheme by Mayo and Walling, and its obvious fundamental shortcomings, it continues to be essentially the only such scheme in use today. However, the more soundly based Patterns of Reactivity Scheme, originally proposed in 1959, has recently been revised in such a way that it provides, in a simple way, far more accurate predictions of monomer reactivity ratios than does the Q‐e scheme. Moreover, it is equally applicable to the forecasting of chain‐transfer constants and to the understanding of the reactivity of initiator radicals. The history of investigations of radical, monomer, and transfer agent reactivity is reviewed here, including a summary of the Revised Patterns Scheme and its applications. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 113–126, 1999     

甲基丙烯酸三丁基锡酯与丙烯酸酯的共聚合

采用自由基引发剂对甲基丙烯酸三丁基锡酯和丙烯酸酯进行共聚合 ,其竞聚率用YBR法解出共聚方程的微分式而求得。甲基丙烯酸三丁基锡酯 (M1 )和丙烯酸甲酯 (M2 )、丙烯酸乙酯 (M2 )、丙烯酸丁酯 (M2 )共聚反应的竞聚率分别为r1 =1 .0 1± 0 .0 6,　r2 =0 .2 9± 0 .0 3;　r1 =1 .0 7± 0 .0 5 ,r2 =0 .38± 0 .0 3;　r1 =1 .1 1± 0 .0 5 ,　r2 =0 .45± 0 .0 3;　而所得到的甲基丙烯酸三丁基锡酯的Q、e值是它对各个单体的所有Q、e值的平均值 ,其Q =0 .5 7,e=- 0 .39     

Kinetic study of the stable free‐radical copolymerization of styrene with butyl methacrylate

The radical copolymerization of styrene and n‐butyl methacrylate mediated by 1‐phenyl‐1‐(2′,2′,6′,6′‐tetramethyl‐1′‐piperidinyl‐oxy)ethane in bulk at 125 °C has been analyzed over a wide range of conversions and monomer feed compositions. Monomer reactivity ratios have been determined, and the Mayo–Lewis terminal model provides excellent predictions for the variations of the intermolecular structure over the entire conversion range. The kinetic analysis of this copolymerization system indicates an apparent propagation rate coefficient independent of the monomer feed composition as well as a limiting conversion that decreases as the styrene monomer feed decreases. This fact is attributed to side reactions leading to unsaturated end groups and the accumulation of nonactive adducts of n‐butyl methacrylate. The number‐average molecular weights linearly increase with conversion, and the copolymers present narrow molecular weight distributions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2750–2758, 2002     

Synthesis of 2-phenoxy-2-phenylethyl acrylate and copolymerization with 2-phenylethyl acrylate: Estimation of monomer reactivity ratios,thermal and optical properties

A new aromatic based monomer 2-phenoxy-2-phenylethyl acrylate (PPEA) was synthesized. Copolymers of PPEA with 2-phenylethyl acrylate (PEA) were prepared by free radical polymerization. The reactivity ratios were estimated using various graphical methods. Structural parameters of the copolymers were obtained by calculating the dyad monomer sequence fractions and the mean sequence length. Optical properties of polymers such as refractive indices and UV-Visible absorption were investigated. The glass transition temperature and thermal degradation behavior of the copolymers were studied. Combined with the RI, transparency and thermal properties, prepared copolymers hold great promise as materials for intraocular lens applications.     

A study of the copolymerization of hydroxyethyl methacrylate and tetrahydrofurfuryl methacrylate

The free radical copolymerizations of hydroxyethyl methacrylate and tetrahydrofurfuryl methacrylate have been investigated at 50°C. The compositions of polymers prepared at low conversions have been determined using ¹³C-NMR, and the glass transition temperatures determined by DSC. The copolymerizations were found to be best described by a terminal model with reactivity ratios of r_H = 1.79 and r_T = 0.76. The triad fraction sequence distributions have been calculated based on the terminal model and the calculated reactivity ratios. The glass transitions have been fitted to the Gordon–Taylor equation. The best value of the Gordon–Taylor constant was found to be k_H = 1.42 ± 0.2, indicating nonideal mixing of the two monomer components in the copolymers. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3730–3737, 1999     

Copolymerization of a dendronized monomer with styrene and different acrylates: Determination of reactivity ratios

The reactivity ratios for the copolymerization of a first‐generation dendronized monomer with styrene and different acrylates are determined. The obtained ratios as well as the copolymer compositions that can be expected are discussed in detail. The influence of the dendron on the polymerization potential of the monomer is estimated by comparing its reactivity to those of linear systems as well as using higher generations of the dendronized monomer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Low- and high-conversion studies of the free radical copolymerization of 2-hydroxyethyl methacrylate with styrene in N,N′-dimethylformamide solution

2-Hydroxyethyl methacrylate (HEMA) and styrene (S) have been copolymerized in a 3 mol · L⁻¹N,N′-dimethylformamide (DMF) solution using 2,2′azobis (isobutyronitrile) (AIBN) as an initiator over a wide composition and conversion range. From low-conversion experiments and ¹H-NMR analysis, the monomer reactivity ratios were determined according to the Mayo–Lewis terminal model. The comparison of the obtained results with those previously reported for copolymerization in bulk and in toluene reveals a relatively small but noticeable solvent effect that can be qualitatively explained by the bootstrap model. Cumulative copolymer composition as a function of conversion is satisfactorily described by the integrated Mayo–Lewis equation; overall copolymerization rate increases with increasing the HEMA/S ratio, and individual monomer conversion is closely related to the monomer molar fraction in the feed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2941–2948, 1999     

Synthesis of statistical glycidyl methacrylate‐n‐vinyl pyrrolidone copolymers and their reaction with naproxen

Free‐radical copolymerization of glycidyl methacrylate (GMA) with N‐vinylpyrrolidone (VPD) was carried out at 50 °C using 3.0 mol · L^?1 of N,N′‐dimethylformamide solution and 9.0 · 10^?3 mol · L^?1 of 2,2′‐azobisisobutyronitrile as an initiator. The modification reaction of GMA‐VPD copolymers with a model bioactive carboxylic acid, 6‐methoxy‐α‐methyl‐2‐naphthaleneacetic acid (naproxen), was studied in the homogeneous phase using basic catalysts. The influence of the type of catalyst and the GMA content was evaluated. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1192–1199, 2002     

Magnetic field effects on the copolymerization of water‐soluble and ionic monomers

The effect of magnetic field (MF) on the radical copolymerization of a series of water‐soluble and ionic monomers is presented including acrylamide (AM), acrylic acid (AA), its ionized form acrylate (A^?), and diallyldimethylammonium chloride (DADMAC). The following combinations have been studied: AM/AA, AM/A^?, AM/DADMAC, and AA/DADMAC. In addition to the MF, strong electrostatic interactions are present for the majority of monomer combinations and conditions. Although the monomer consumption rate (R_p) increased up to 65% applying a MF of 0.1 Tesla, the composition of the resulting copolymers was not affected under such conditions. Despite this increase of R_p by MF, the electrostatic repulsion between ionic monomers and charged growing radicals dominates R_p and governs the copolymer composition with and without MF. The order of the experimentally obtained reactivity ratios reflects the extent of electrostatic interaction: r_AM/AA (1.41) < r (3.10) < r_AA/DADMAC (4.25) < r_AM/DADMAC (6.95) and r_AA/AM (2.20) > r_DADMAC/AA (0.25) > r (0.17) > r_DADMAC/AM (0.03). Overall, weak MF offers to reduce the production time without modifying the product composition. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 373–383, 2009