Identification and Isotopic Analysis of Safranal from Supercritical Fluid Extraction and Alcoholic Extracts of Saffron

Abstract

Saffron is one of the most expensive spices. Consequently, it is not so difficult to understand that fraudulent saffron exists. Thus, it was interesting to study the most important flavouring component, in terms of aroma, volatile compound of saffron - safranal - by ¹³C isotopic analysis. Five saffron samples from different countries have been analysed. Safranal has been extracted by methanol or by Supercritical Fluid Extraction (SFE). The results indicate that there is a significant difference between the synthetic safranal and the natural one. On the contrary, it is difficult to conclude on the difference between the various geographical origins, as the isotopic variations are small. Moreover, it has been found that Supercritical Fluid Extraction allowed the selective extraction of volatile compounds from saffron under optimised conditions. It is a cleaner and faster method of extraction compared to the extraction using organic solvent. Nevertheless, an isotopic fractionation occurs in relation to the extraction yield of safranal.     

A Unified Sample Preparation System for Extraction of Various Analyte/Matrix Combinations

A supercritical fluid extraction/enhanced solvent extraction system (SFE/ESE) was used to remove polar and non-polar analytes from various matrices. Extraction of environmental pollutants from soil, additives from low density polyethylene, sulfa drugs from animal tissue, and drug from tablet was performed using both SFE and ESE. Results showed that a single instrumental system can be used to perform both ESE with organic solvents and SFE with carbon dioxide-based fluids. Each method has its own unique advantages and applications. The ability to carry out both solvent extraction and supercritical fluid extraction with one system has obvious economical advantages.     

The use of alternative fluids in on-line supercritical fluid extraction – capillary gas chromatography

A key feature differentiating analytical supercritical fluid extraction (SFE) from conventional liquid extraction is the possibility of varying the solvent strength of a supercritical fluid to achieve selective extractions of specific target compounds, or functional classes of compound, from complex matrices. This can be accomplished by using supercritical fluids other than carbon dioxide, for example, sulfur hexafluoride, nitrous oxide, or sulfur hexafluoride-modified carbon dioxide. The use of these fluids will be demonstrated by the characterization of complex environmental and petroleum matrices by directly coupled SFE – capillary GC. On-line SFE-GC involves the decompression of pressurized extraction fluid directly into the heated, unmodified capillary split injection port of the chromatograph. This paper will also show how, by adjustment of the extraction temperature and pressure, SFE selectivity may be further enhanced.     

The use of supercritical fluid extraction for the determination of 4-deoxynivalenol in grains: The effect of the sample clean-up and analytical methods on quantitative results

Summary Deoxynivalenol (DON) is one of the trichothecene mycotoxins produced byFusarium molds in grains. Polar cosolvents in supercritical carbon dioxide (SC-CO₂) are needed to extract and isolate the polar DON moiety. This unfortunately results in the extraction of many interfering compounds from the grains into the extracts obtained by supercritical fluid extraction (SFE). Analysis of DON by high performance liquid chromatography (HPLC) using ultraviolet detection (UV) does not provide a specific detection method, although specific detection of DON can be enhanced by using purification steps after SFE. Alternatively, combining SFE with an immunoaffinity method can improve detection specificity and sample cleanup. In this study, SFE was employed to determine DON in grains and cereal products. The effectiveness of the SFE method was compared with two different solvent extraction methods. The extracted DON was quantitatively determined by HPLC-UV using external standardization or competitive enzymelinked immunosorbent assay (ELISA). In some cases, extracts were purified prior to quantitative analysis of the DON by using solvent partitioning, and/or solid phase extraction, or immunoaffinity columns. Therefore, this paper describes the analysis of DON in cereals using different extraction, cleanup and analysis methods. Names are necessary to report factually on available data: however, the USDA neither guarantees nor warrants the standard of the product, and the use of the name by USDA implies no approval of the products to the exclusion of others that may also be suitable.     

煤烟气中痕量有机物的分析及去除

采用不同吸附剂对煤烟气中的痕量有机物进行了富集，比较了各种吸附剂的富集能力，对富集的样品用索氏提取及超临界流体萃取装置进行了萃取，用ＧＣ－ＭＳ－ＤＳ联用方法作了定性鉴定，指出超临界萃取技术在提取煤烟气中痕量有机物方面的优势。探讨了用催化转化法去除煤烟气中有机污染物的可能性。     

超临界流体萃取在天然药物分析中的应用

按物质的不同性质综述了１９９５年以来超临界流体萃取技术在天然药物分析中的一些进展情况,常见的分析主要包括萜类、生物碱、黄酮类、挥发油及苯丙素类。超临界流体萃取作为一门新型的样品前处理技术,在天然药物的分离分析中展示了其特有的优点。该技术操作温度低,不会引起热敏性的分解变质;使用的有毒溶剂少,从而减少化学药品对药物的污染。     

Application of supercritical fluid extraction coupled with counter–current chromatography for extraction and online isolation of unstable chemical components from Rosa damascena

Supercritical fluid extraction (SFE) coupled with high‐speed counter‐current chromatography (HSCCC) was successfully used for the extraction and online isolation of the unstable compounds from Rosa damascene in a single extraction and separation operation in two stages. The solvent systems of SFE/HSCCC were optimized with the help of multiexponential function model. At the first stage, the upper phase of the solvent system of n‐butanol–tert‐butyl methyl ether–acetonitrile–0.1% aqueous TFA (1.7:1.0:0.8:4.0, v/v/v/v) was used as both the SFE entrainer and the HSCCC stationary phase, and the target compounds were eluted with the corresponding lower phase to separate the hydrophobic compounds. At the second stage, the upper phase of the solvent system of n‐hexane–ethyl acetate–methanol–water (3.2:1.0:2.8:2.6, v/v/v/v) was used as both the SFE entrainer and the HSCCC stationary phase, followed by elution with the corresponding lower phase to separate the moderate hydrophobic compounds. Six compounds including formononetin, delphinidin, cyaniding, 5,6,4′‐trihydroxy‐7,8‐dimethoxy flavone, 5,3′‐dihydroxy‐7,8‐dimethoxy flavone, and 5‐hydroxy‐6,7,8,3′,4′‐pentamethoxy flavone were successfully separated in one extraction–separation operation within 300 min. The targeted compounds were identified by MS and NMR spectroscopy. This research has opened up great prospects for industrial application of SFE/HSCCC to the extraction and separation of unstable compounds.     

Comparison of solid-phase microextraction, supercritical fluid extraction, steam distillation, and solvent extraction techniques for analysis of volatile consituents in Fructus Amomi

Four sampling techniques, solid-phase microextraction (SPME), supercritical fluid extraction (SFE), steam distillation (SD), and solvent extraction (SE), were compared for the analysis of volatile constituents from a traditional Chinese medicine (TCM) of the dried ripe fruit of Fructus Amomi (Sha Ren). A total of 38 compounds were identified by gas chromatography/mass spectrometry. Different SFE and SPME parameters (modifier content, extraction pressure, and temperature for SFE and fibers, extraction temperature, and time for SPME) were studied. The results by SFE and SPME were compared with those obtained by conventional SD and SE methods. The results showed that SFE and SPME are better sample preparation techniques than SD and SE. Due to SFE's requirement for expensive specialized instrumentation, the simplicity, low cost, and speed of SPME make it a more appropriate technique for extraction of volatile constituents in TCMs.     

Comparison of extraction techniques for the isolation of explosives and their degradation products from soil

A comparison of four extraction techniques used for the isolation of 14 explosive compounds (Method 8330-Explosives) from spiked soil samples is described. Soxhlet warm extraction (SWE), pressurized solvent extraction (PSE), microwave assisted extraction (MAE) and supercritical fluid extraction (SFE) were included. The effects of basic extraction conditions – i.e. type of extraction solvent, temperature, pressure, and extraction time – were investigated. The best extraction recovery of the monitored compounds from spiked soil was obtained using pressurized solvent extraction. Recoveries of explosives using the PSE technique were in the range from 65 to 112%. Extraction recoveries by Soxhlet warm extraction and supercritical fluid extraction reached 65–99% and 52–75%, respectively. The lowest extraction recoveries (28–65%) were obtained using microwave assisted extraction. A very low extraction recovery for tetryl was observed in all cases but the best results were achieved by pressurized solvent extraction (58%).     

Comparison by capillary SFC and SFC-MS of soxhlet and supercritical fluid extraction of hamster feces

Components of hamster feces ranging from low molecular weight fatty acids through the expected range of triglycerides have been eluted in a single SFC run with simultaneous pressure and temperature programming. Temperature programming from 140°C to 240°C was required to provide optimum conditions for separation of the fatty acids and to move the elution region of the sterol esters away from that of the triglycerides. Data from chemical ionization and electron impact mass spectrometry of compounds separated by SFC were used to confirm identities suggested by retention measurements and to provide tentative identities of unknown compounds. SFC with flame ionization detection was used to compare Soxhlet extraction, off-line supercritical fluid extraction (SFE), and on-line SFE of the feces. Although samples obtained by Soxhlet extraction and SFE produced very similar chromatograms, SFE required far less time and consumed much smaller quantities of organic solvent.     

Solid-phase/supercritical-fluid extraction for liquid chromatography of phenolic compounds in freshwater microalgae and selected cyanobacterial species

In the present paper a new extraction technique based on the combination of solid-phase/supercritical-fluid extraction (SPE/SFE) with subsequent reversed-phase HPLC is described. The SPE/SFE extractor was originally constructed from SPE-cartridge incorporated into the SFE extraction cell. Selected groups of benzoic acid derivatives (p-hydroxybenzoic, protocatechuic, gallic, vanillic and syringic acid), hydroxybenzaldehydes (4-hydroxybenzaldehyde and 3,4-dihydroxybenzaldehyde) and cinnamic acid derivatives (o-coumaric, p-coumaric, caffeic, ferulic, sinapic and chlorogenic acid) were extracted. Cyclic addition of binary extraction solvent system based on methanol:water (1:1, v/v) and methanol/ammonia aqueous solution was used for extraction at 40 MPa and 80 °C. The p-hydroxybenzoic, protocatechuic, vanillic, syringic, caffeic and chlorogenic acid; 4-hydroxybenzaldehyde and 3,4-dihydroxybenzaldehyde were identified by HPLC-electrospray mass spectrometry in SPE/SFE extracts of acid hydrolyzates of microalga (Spongiochloris spongiosa) and cyanobacterial strains (Spirulina platensis, Anabaena doliolum, Nostoc sp., and Cylindrospermum sp.). For the identification and quantification of the compounds the quasi-molecular ions [M−H]⁻ and specific fragments were analysed by quadrupole mass spectrometry analyzer. Our analysis showed that the microalgae and cyanobacteria usually contained phenolic acids or aldehydes at μg levels per gram of lyophilized sample. The proposed SPE/SFE extraction method would be useful for the analysis of different plant species containing trace amount of polar fraction of phenols.     

Pesticide multiresidue analysis of 303 compounds using supercritical fluid extraction.

Compared to generally used solvent extraction methods, supercritical fluid extraction (SFE) with carbon dioxide has the advantages of automation and simple operation in preparing samples for pesticide residue analysis. This report is the outcome of our evaluation of the practicality of SFE for the preparation of samples for pesticide residue analysis. We studied the recovery of 303 compounds with several crops by a simultaneous analytical method of SFE, cartridge column purification, followed by GC/MS determination. We achieved 70 to 120% recovery for more than 80% of the examined compounds.     

Extraction of aroma compounds in a HFMC: Dynamic modelling and simulation

In the present work the dynamic behaviour of hollow-fiber membrane contactors (HFMCs) used for the recovery of aroma compounds from an aqueous feed phase with the help of a conventional solvent has been studied. Many aroma compounds play a significant role in the production of flavorants, which are used in the food industry to flavor, improve and increase the appeal of their products. Various aroma compounds with different physico-chemical characteristics have been chosen for this study. A real dynamic model of membrane-based solvent extraction (MBSE) process was developed. In the studied system, the aqueous feed and solvent phases are re-circulated to their respective storage tanks after contacting in a hollow fibres membrane contactor. The developed dynamic model was verified with experimental data from the literature and good level of agreement was found. It has been used as a tool to simulate and conclude about the influence of various module configurations, membrane characteristics and hydrodynamic conditions on the extraction of various aroma compounds. It was noted that transient models of membrane-based separation need attention to improve the simulation studies and experimental validity to encourage it at larger scales.     

GC-MS of volatile components of Schisandra chinensis obtained by supercritical fluid and conventional extraction

In this paper, the volatile compounds of Schisandra chinensis obtained by different extraction techniques including supercritical fluid extraction (SFE), steam distillation (SD), Soxhlet extraction (SE) and ultrasound-assisted extraction (UAE) were investigated for the first time. The sample preparation procedure for GC-MS analysis of the volatile compounds was optimized and then 37, 45, 27 and 37 compounds were identified in the samples obtained by SFE, SD, SE and UAE methods, respectively. As the therapeutic effect of the traditional Chinese medicine is usually based on multifarious essential components or the combination of them instead of only one component, the volatile compounds were compared in groups with the extracts by SE, SD and UAE. This would be more reasonable to evaluate the effects of an alternative technique to extracting multifarious essential components. Among the identified components in the SFE extract, 32 compounds were the same as that by three conventional methods, accounting for 90.5% of the volatile compounds identified. However, as the volatile compounds were classed into groups, it was easy to see that the Schisandra chinensis oil extracted by SFE was made up largely of aromatics and sesquiterpenoids (52.1 and 27.6%, respectively), with less amounts of monoterpenoids and other compounds, distinguishing SFE from the conventional extractions.     

Comparison of extraction methods for sampling of low molecular compounds in polymers degraded during recycling

The demand for mechanical recycling of plastic waste results in an increasing amount of recycled polymeric materials available for development of new products. In order for recycled materials to find their way into the material market, high quality is demanded. Thereby, a complete and closed loop of polymeric materials can be achieved successfully. The concept of high quality for recycled plastics imply that besides a pure fraction of e.g. polyethylene (PE) or polypropylene (PP), containing only minor trace amount of foreign plastics, knowledge is required about the type and amount of low molecular weight (LMW) compounds. During long-term use (service-life), products made of polymeric materials will undergo an often very slow degradation where a series of degradation products are formed, in parallel, additives incorporated in the matrix may also degrade. These compounds migrate at various rates to the surrounding environment. The release rate of LMW products from plastics depends on the initiation time of degradation and the degradation mechanisms. For polymers the formation of degradation products may be initiated already during processing, and subsequent use will add products coming from the surrounding environment, e.g. fragrance and aroma compounds from packaging. During recycling of plastics, emissions which contain a series of different LMW compounds may reach the environment leading to unwanted exposure to additives and their degradation residues as well as degradation products of polymers.Several extraction techniques are available for sampling of LMW compounds in polymers before chromatographic analysis. This paper reviews and compares polymer dissolution, accelerated solvent extraction (ASE), microwave assisted extraction (MAE), ultrasound assisted extraction (UAE), super critical fluid extraction (SFE), soxhlet extraction, head-space extraction (HS), head-space solid phase micro extraction (HS-SPME), and head-space stir bar sorptive extraction (HSSE) as appropriate sampling methods for LMW compounds in recycled polymers. Appropriate internal standards useful for these kinds of matrices were selected, which improved the possibility for later quantification. Based on the review of extraction methods, the most promising techniques were tested with industrially recycled samples of HDPE and PP and virgin HDPE and PP for method comparison.     

Liquid–solid disk extraction followed by supercritical fluid elution and gas chromatography of phenols from water

A method combining the techniques of liquid – solid disk extraction (LSDE) and supercritical fluid elution (SFE) has been developed for the phenols regulated by the Clean Water Act. LSDE uses a disk or membrane made of polytetrafluoroethylene (PTFE) fibrils impregnated with small particles, e.g. styrene divinylbenzene (SDB) resin, to extract phenols from water. After disk extraction the retained analytes are eluted from the disk using SFE. SFE is used as an alternative to liquid solvent elution with an organic solvent. Analytes are separated, identified, and quantified using gas chromatography – ion trap detector mass spectrometry (GC-ITDMS). The method is capable of sub parts per billion detection limits, and precision of 5–28% RSD. Evaluation of various disks or membranes, such as C₁₈-silica disks, SDB disks, and ion exchange membranes, has also been performed for the extraction of phenols from water. The results obtained from the in-situ aqueous acetylation of phenols and extraction of their acetates are quantitative. The utilization of LSDE and SFE techniques has proven to be a more effective approach than liquid – liquid extraction in minimizing air pollution and solvent waste.     

Comparison of supercritical fluid and Soxhlet extractions for the isolation of nitro compounds from soils

Supercritical fluid extraction (SFE) with CO(2), a clean and rapid alternative to conventional Soxhlet extraction, was investigated for the extraction of nitro compounds from soil samples. Quantitative extraction by SFE was accomplished at a pressure of 25 MPa and an extraction temperature of 60 degrees C, for 30 min in dynamic mode and using acetonitrile as modifier, and the results were comparable with those obtained by acetonitrile Soxhlet extraction (3 h) for all soil samples. Extracts from these two procedures were analyzed by gas chromatography coupled with mass spectrometry. Quantitative reproducibility for SFE extracts was acceptable (RSD 2-10%), and the quantity of solvent was reduced from 160 mL for Soxhlet extraction to 5 mL in the case of SFE.     

Use of capillary gas chromatography/sensory analysis as an additional tool for sampling technique comparison in peach aroma analysis

Capillary GC/sensory analysis was used to judge if dynamic headspace on sliced pulp and on intact fruit, and solvent extraction could collect the “character impact” and the “contributory” aroma compounds in peaches. Capillary GC/sensory data showed that the headspace techniques selectively recovered the “contributory” volatile compounds, which are strictly related to the characteristic odor of the various peach cultivars, whereas solvent extraction better quantified the “character impact” compounds (lactones).     

Supercritical fluid extraction of cynaropicrin and 20-hydroxyecdysone from Leuzea carthamoides DC

Leuzea carthamoides is an adaptogenic plant containing biologically active compounds as ecdysteroids and guaianolide-type sesquiterpene lactones, conventionally extracted from the plant with ethanol. It may be a potential source of the mentioned natural compounds. Ethanol-modified near-critical CO(2) was used as selective solvent with the aim to increase the level of 20-hydroxyecdysone in the extract from L. carthamoides roots and to remove selectively cynaropicrin, a sesquiterpene lactone of bitter taste, from the leaves. The extraction conditions were varied (pressure 20-28 MPa, temperature 40-60 degrees C, ethanol concentration in the solvent 0-7.1%) and the extraction yield and extract composition were compared with the results of ethanolic extraction. The supercritical fluid extraction (SFE) from finely powdered plant was controlled by phase equilibrium. Cynaropicrin was quantitatively removed from the leaves where 89% of 20-hydroxyecdysone was retained. The extraction yield of 20-hydroxyecdysone from roots with ethanol-modified CO(2 )was lower by 30% than with ethanol but its concentration in the extract was higher by 67%.     

Enantiomeric composition studies in Lavandula species using supercritical fluids

Characteristic aroma compounds in plants and essential oils of Lavandula from different varieties were examined. The study of the qualitative and quantitative composition of the major volatile components was faced by developing a method based on the use of supercritical fluid extraction-GC-MS (SFE-GC-MS). The optimization of a variety of parameters affecting SFE extraction enabled RSDs from three replicates lower than 2% to be achieved. Equally, recoveries of up to 59% were obtained by applying the proposed method. The use of multidimensional GC was necessary to enantiomerically resolve the target compounds. The obtained results showed enantiomeric purities >90% for all studied compounds in all varieties considered, proving the natural invariability of the enantiomeric composition of the compounds of interest. This information can be useful in authenticity studies as well as in selecting natural sources of enantiomerically pure compounds.