Hydrophilic magnetic polymer latexes. 2. Encapsulation of adsorbed iron oxide nanoparticles

The encapsulation of seed polymer particles coated by anionic iron oxide nanoparticles has been investigated using N-isopropylacrylamide as a main monomer, N,N-methylene bisacrylamide as a crosslinking agent, itaconic acid as a functional monomer and potassium persulfate as an anionic initiator. The magnetic latexes obtained have been characterized with regard to particle size, iron oxide content and electrophoretic mobility. All these properties have been examined by varying several polymerization parameters: reaction medium, monomer(s) and crosslinking agent concentrations, nature of seed latexes and type of polymerization (batch versus shot process). The magnetic content in the polymer microspheres strongly depends on the polymerization procedure (i.e., encapsulation process) and varies between 6 and 23 wt%, and monodisperse magnetic polymer particles were obtained. Received: 28 December 1999 Accepted in revised form: 15 June 1999     

Kinetic study of the crosslinking reaction of 1,2‐polybutadiene with dicumyl peroxide in the absence and presence of vinyl acetate

The crosslinking reaction of 1,2-polybutadiene (1,2-PB) with dicumyl peroxide (DCPO) in dioxane was kinetically studied by means of Fourier transform near-infrared spectroscopy (FTNIR). The crosslinking reaction was followed in situ by the monitoring of the disappearance of the pendant vinyl group of 1,2-PB with FTNIR. The initial disappearance rate (R₀) of the vinyl group was expressed by R₀ = k[DCPO]^0.8[vinyl group]^−0.2 (120 °C). The overall activation energy of the reaction was estimated to be 38.3 kcal/mol. The unusual rate equation was explained in terms of the polymerization of the pendant vinyl group as an allyl monomer involving degradative chain transfer to the monomer. The reaction mixture involved electron spin resonance (ESR)-observable polymer radicals, of which the concentration rapidly increased with time owing to a progress of crosslinking after an induction period of 200 min. The crosslinking reaction of 1,2-PB with DCPO was also examined in the presence of vinyl acetate (VAc), which was regarded as a copolymerization of the vinyl group with VAc. The vinyl group of 1,2-PB was found to show a reactivity much higher than 1-octene and 3-methyl-1-hexene as model compounds in the copolymerization with VAc. This unexpectedly high reactivity of the vinyl group suggested that an intramolecular polymerization process proceeds between the pendant vinyl groups located on the same polymer chain, possibly leading to the formation of block-like polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4437–4447, 2004     

Monodisperse polystyrene particles crosslinked with poly(dimethyl siloxane) diacrylate using dispersion polymerization and their monomer swelling capability

A flexible poly(dimethyl siloxane) diacrylate (PDMSDA) crosslinker was synthesized using different molecular weights of poly(dimethyl siloxane) (PDMS, M _n =550, 1,700, 4,000 g/mol). The monodisperse polystyrene (PS) particles crosslinked with various contents of PDMSDA were prepared by dispersion polymerization, and applied as seed particles in the seeded polymerization. The crosslinking density of the PS particles was determined from the rate of transport of the monomer molecules to the crosslinked seed particles. It was confirmed that the monomer swelling capacity of seed particles and final morphological changes of polymer beads were determined significantly by the crosslinking density of the seed particles. In addition, the morphological change was not observed without the oligomer swelling step in the seeded polymerization due to the hydrophobic property of PDMS. When highly crosslinked seed particles were used in the seeded polymerization, peculiar morphology (doublet structure) of polymer beads appeared.     

The Nature of Crosslinking in N‐Vinylformamide Free‐Radical Polymerization

N‐Vinylformamide (NVF) free‐radical polymerization was found to form polymer gels at high conversions both in bulk and in solution. The polymerization was conducted at different temperatures, monomer and initiator concentrations to show the gelation conditions. Gel fractions and gel swelling ratios were also measured after separating the gel from the polymer samples. In order to confirm the crosslinking unit, a series of hydrolysis experiments were conducted on the gel samples. The hydrolysis results showed that the crosslinks in PNVF gels could be destroyed by alkaline hydrolysis. The most appropriate explanation to this fact is that crosslinking takes place via the amide group.     

Cyclopolycondensations. VIII. New Thermally Stable Aromatic Polybenzoxazinones by Solution Polymerization in Polyphosphoric Acid

High molecular weight polybenzoxazinones have been prepared by cyclo-polycondensation reaction of 4,4′-diamino-3,3′-biphenyldicarboxylic acid with a variety of aromatic carbonyl compounds using a solution polymerization technique in polyphosphoric acid. From the model reactions of anthranilic acid, and 4,4′-diamino-3,3′-biphenyldicarboxylic acid with benzoyl chloride in polyphosphoric acid, it is established that the cyclopolycondensation proceeds through the formation of an open-chain tractable precursor, polyamic acid of high molecular weight (ninh = 2.66) in the first step, which subsequently undergoes thermal or chemical cyclodehydration along the polymer chain, to yield, in the second step, a fully aromatic polybenz-oxazinone. Polybenzoxazinones thus obtained have excellent thermal stability both in nitrogen and in air.

The optimum polymerization conditions for obtaining polyamic acid of high molecular weight are determined by the study of reaction variables such as polymerization temperatures, monomer concentrations, and reaction time as well as the effect of P₂O₅ concentrations in polyphosphoric acid.     

The kinetics of poly(N-isopropylacrylamide) microgel latex formation

Conversion versus time curves were measured for poly(N-isopropylacrylamide) microgel latexes prepared by polymerization in water with sodium dodecyl sulfate, SDS. Polymerization rates increased with temperature with methylenebisacrylamide crosslinking monomer consumed faster thanN-isopropylacrylamide. The particle diameter decreased with increasing concentrations of SDS in the polymerization recipe and there was evidence that the rate of polymerization increased somewhat with SDS concentration. Particle formation occurred by homogeneous nucleation as micelles were absent.Comparison of particle size distributions from dynamic light scattering to those from a centrifugal sizer led to the conclusion that larger particles within a specific latex were less swollen with acetonitrile than were the smaller ones. This was interpreted as evidence for the polymer in larger particles having a higher crosslink density. Particle swelling was estimated from swelling ratios defined as the particle volume at 25 °C divided by the volume at 50 °C. In the absence of crosslinking poly(N-isopropylacrylamide) linear chains would disolve at 25 °C. The swelling results indicated that the average crosslink density in the particles decreased with conversion. This was explained by the observation that the methylenebisacrylamide was consumed more quickly and is typical of crosslinking in emulsion polymerization where polymer particles have high polymer concentrations at their birth.     

Particle nucleation and monomer partitioning in styrene O/W microemulsion polymerization

Particle nucleation in the polymerization of styrene microemulsions was found to take place throughout the polymerization as indicated by measurements of the particle number as a function of conversion. A mechanism based on the nucleation in the microemulsion droplets was proposed to explain the experimental findings although homogeneous nucleation and coagulation during polymerization were not completely ruled out. A thermodynamic model was developed to simulate the partitioning of monomer in the different phases during polymerization. The model predicts that the oil cores of the microemulsion droplets were depleted early in the polymerization (4% conversion). Due to the high monomer/polymer swelling ratio of the polymer particles, most of the monomer resides in the polymer particles during polymerization. The termination of chain growth inside the polymer particles was attributed to the chain transfer reaction to monomer. The low n? (less than 0.5) of the microemulsion system was attributed to the fast exit of monomeric radicals.     

Effects of the polymer-support on the synthesis of 2,4-dibromophenyl allyl ether in a triphase catalysis

The synthesis of 2,4-dibromophenyl allyl ether by reacting allyl bromide with 2,4-dibromophenol in an organic solvent/alkali solution by triphase catalysis was studied. A macroporous polymer pellet which served as the support of the catalyst was prepared by reacting styrene monomer with chloromethyl styrene and divinylbenzene through suspension polymerization. Tri-n-butylamine was immobilized on the surface of the polymer pellet to form the triphase catalysts. Immobilization of the catalyst on the polymer support carried out in a mechanical agitator was suggested to obtain a high catalyst reactivity. In the three-phase reaction, the effects of agitation speed, and the characteristics of the catalyst pellet which affect the conversion of allyl bromide in the three-phase catalytic reaction were examined in detail. Based on the experimental data, the optimum operating parameters for preparing the triphase catalyst to get a high yield of 2,4-dibromophenyl allyl ether were: using a low degree of polymer crosslinking (2%), and small particle size. The yield of the product obtained from the present study is higher than that which was obtained in a two-phase reaction. © 1993 John Wiley & Sons, Inc.     

Kinetics of polyelectrolyte network formation in free-radical copolymerization of acrylic acid and bisacrylamide

Recently, a research/development program has been initiated to investigate the kinetics of synthesis, characterization and applications of polyelectrolyte networks. The research on crosslinking involves both theoretical development and experimentation. Herein, is provided a summary of this work. In the experimental polymerization done to date, acrylic acid (AA)/N.N'-methylenebisacrylamide (BAM) was studied in considerable detail. The polymerization conditions were: temperature, 50°C; initial monomer concentration, 5 wt%, of which 1.0 mol% is BAM; K₂S₂O₈(KPS) as the initiator, 10⁻³ mol/L; pH range, 1 − 13; sodium chloride concentrations up to 3.1 mol/L. Measurements included: monomer conversion, polymer composition, sol/gel fraction, swelling ratio, and the densities of primary cyclization, secondary cyclization and crosslinking. It was found that the effect of polymerization parameters on the resulting polymer network microstructure was dramatic, and in particular, the pH and ionic strength of the reaction medium were important parameters. In the theoretical studies, the Tobita-Hamielec kinetic gelation model was extended to incorporate the concept of ion pair interaction and the divinyl loop formation. The system was treated as a multi-component polymerization of acrylic acid, acrylate ion, acrylate ion pair and bisacrylamide. The model permits one to investigate the development of the crosslinking density distribution among primary polymer chains during the course of polymerization as a function of pH and ionic strength.     

Anomalous solubility of polyacrylamide prepared by dispersion (precipitation) polymerization in aqueous tert‐butyl alcohol

Polyacrylamide prepared by dispersion (precipitation) polymerization in an aqueous t‐butyl alcohol (TBA) medium is only partially soluble when the TBA concentrations in the polymerization media are in the range 82 vol % < TBA < 95 vol %. Independent experiments with a soluble (linear) sample of polyacrylamide show that the polymer swells sufficiently in the aforementioned media to lower the glass‐transition temperature of the polymer below the polymerization temperature (50 °C). The anomalous solubility has been attributed to the crosslinking of polymer chains that occurs during the solid‐phase polymerization of acrylamide in the swollen polymer particles. It is postulated that some of the radical centers shift from the chain end to the chain backbone during solid‐phase polymerization by chain transfer to neighboring polymer molecules, and when pairs of such radicals come into close vicinity, crosslinking occurs. However, dispersion (precipitation) polymerization in other media such as aqueous methanol and aqueous acetone yields polymers that are soluble. This result has been attributed to the fact that the polymer radical undergoes a chain‐transfer reaction with these solvents at a much faster rate than with TBA, which overcomes the effect of the polymer‐transfer reaction. Even the addition of as little as 5% methanol to a TBA–water mixture (TBA:water = 85:10) gives rise to a soluble polymer. The chain‐transfer constants for acetone, methanol, and TBA have been determined to be 9.0 × 10^?6, 6.9 × 10^?6, and 1.48 × 10^?6, respectively, at 50 °C. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3434–3442, 2001     

Topotactic solid-state polymerization of 3-aminocrotonamide by radiation

Radiation-induced solid-state polymerization of 3-aminocrotonamide (3-amino-2-butenamide) was carried out at room temperature, in open air atmosphere and under vacuum condition. The polymer obtained was white powder, soluble in methanol, but insoluble in water. The nature of polymers were investigated by IR, UV, x-ray, DP-MS, and elemental analysis to elucidate the mechanism of the polymerization. The polymer was crystalline with melting point in the range of 245–255°C. The cell parameters and space group of monomer and polymers were determined from powder x-ray diffraction patterns. The similarity of crystal structures of monomer and polymer indicated a topotactic polymerization. It was shown by spectroscopic investigations and elemental analyses that the polymerization proceeds by condensation reaction with evolution of one mole ammonia per two combined moles of monomer through a free radical mechanism. © 1996 John Wiley & Sons, Inc.     

Cyclopolycondensation. XIII. New synthetic route to fully aromatic poly(heterocyclic imides) with alternating repeating units

Fully aromatic poly(heterocyclic imides) of high molecular weight were prepared by the cyclopolycondensation reactions of aromatic diamines with new monomer adducts prepared by condensing orthodisubstituted aromatic diamines with chloroformyl phthalic anhydrides. The low-temperature solution polymerization techniques yielded tractable poly(amic acid), which was converted to poly(heterocyclic imides) by heat treatment to effect cyclodehydration at 250–400°C under reduced pressure. In this way, the polyaromatic imideheterocycles such as poly(benzoxazinone imides), poly(benzoxazole imides), poly(benzimidazole imides) and poly(benzothiazole imides) were prepared, which have excellent processability and thermal stability both in nitrogen and in air. The poly(amic acids) are soluble in such organic polar solvents as N,N-dimethyl-acetamide, N-methylpyrrolidone, and dimethyl sulfoxide, and the films can be cast from the polymer solution of poly(amic acids) (η_inh = 0.8–1.8). The film is made tough by being heated in nitrogen or under reduced pressure to effect cyclodehydration at 300–400°C. The polymerization was carried out by first isolating the monomer adducts, followed by polymerization with aromatic diamines. On subsequently being heated, the open-chain precursor, poly(amic acid), undergoes cyclodehydration along the polymer chain, giving the thermally stable ordered copolymers of the corresponding heterocyclic imide structure.     

Polymer degradation during radiation-induced emulsion polymerization of styrene

Styrene was polymerized in emulsion with initiation by γ-rays at a dose rate of 0.6 Mrad/hr. Polymerization rates were as expected from previous reports by others. No branching or crosslinking was detectable, and the M _w/M _n ratio of the polystyrene did not change significantly during the course of the polymerization reaction. The molecular weight of the product polymer decreased with increasing conversion, in contrast to the behavior of chemically initiated emulsion polymerizations. Monomer-free polystyrene does not degrade under the same radiation conditions, and the progressive decrease of polymer molecular weight with conversion is shown to result from the presence of monomer.     

Characterization of resulting network polymer precursors in stepwise crosslinking diepoxide/diamine polymerization

Our previous mechanistic discussion of network formation in chainwise crosslinking multiallyl polymerization was extended to stepwise crosslinking diepoxide/diamine polymerization, typically including bisphenol‐A diglycidyl ether (BADGE) and 4,4′‐diaminodiphenylmethane (DDM). In allyl polymerization a monomer chain transfer is an essential termination reaction, providing only oligomeric primary polymer chains. Therefore, crosslinking multiallyl polymerization could be in the category of a classical gelation theory. Thus, the gelation behavior was discussed by comparing the actual gel point with the theoretical one. Then the resulting network polymer precursors (NPPs) were characterized by size‐exclusion chromatography‐multiangle laser light scattering‐viscometry to clarify the stepwise crosslinking BADGE/DDM polymerization mechanism. Notably, the intrinsic viscosity ratio [η]_NPP/[η]_Linear tended to decrease with the progress of crosslinking and finally, it reached less than 0.2. This suggests that the structure of resulting NPP becomes dendritic at a conversion close to the gel point. These dendritic NPPs can collide with each other to form crosslinks between NPPs, eventually leading to gelation as a reflection of the high concentration of NPP. The dilution effect on gelation was marked in polar solvent; no gelation was observed at a dilution of 1/5. However, in nonpolar solvent the gelation was promoted by dilution; this is ascribed to enhanced crosslink formation between NPPs through hydrogen bonding due to abundant hydroxyl groups in the NPP generated by the polyaddition reaction. Finally, the subject of “Is cured epoxy resin inhomogeneous?” is briefly discussed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Kinetics of dispersion polymerization of soluble monomers. I. Methyl methacrylate

The kinetics of the free-radical-initiated polymerization of methyl methacrylate in n-dodecane to produce dispersions of polymer stabilized with a steric barrier of soluble polymer chains have been determined by thermal analysis. The mode of the polymerization can be described in terms of a bulk polymerization within the monomerswollen polymer particles. A theoretical expression has been derived on the basis of a reaction scheme in which all the radicals produced in the diluent phase are transferred immediately to the polymer particles, monomer swells the polymer particles in partition equilibrium with monomer in the diluent, and polymerization proceeds within the polymer particle according to the kinetics of bulk polymerization, taking into account Trommsdorff acceleration and plasticization effects.     

Sequential crosslinking for mechanical property development in high sulfur content composites

This report details how sequential crosslinking processes can be applied to develop properties in sulfur-bisphenol A composites. Olefinic carbons were first crosslinked by inverse vulcanization (InV) at 180°C and then aryl carbon crosslinking was affected via radical-induced aryl halide-sulfur polymerization (RASP) at 220°C. To demonstrate that these two crosslinking mechanisms are orthogonal and can be used to affect stepwise property changes, O,O′-diallyl-2,2′,5,5′-tetrabromobisphenol A was selected as a comonomer. After InV of the monomer with 90 wt% sulfur, a flexible plastic material having an elongation at break of 89% was obtained, whereas after heating this premade polymer to initiate RASP, the polymer develops a threefold increase in its tensile strength and has an elongation at break of only 29%. The sequential crosslinking strategy demonstrated herein thus provides an innovative approach to tuning the properties of high sulfur-content materials.     

Determination of Monomer Transfer Constants in Emulsion Polymerization

The monomer transfer constant, C_m can be determined from the chain length distribution (CLD) under conditions in which the monomer transfer reaction rate is much larger than the other chain termination processes. Such reaction conditions are feasible in emulsion polymerization where bimolecular termination reactions are relatively less important. We conducted theoretical investigations aimed at finding the necessary reaction conditions to apply the CLD method to emulsion polymerization. The number of polymer chains per polymer particle needs to be large enough in order to keep the effects of unknown chain lengths to a minimum, i.e., the unknown chains formed during the nucleation period and those which stop growing when the polymerization is stopped for sampling. In emulsion polymerization, the polymer concentration at the polymerization locus is higher than the corresponding bulk polymerization as long as monomer droplets exist, and the polymer transfer reaction may possess significant effects under conditions where monomer transfer reactions are important. The Monte Carlo (MC) simulation results have shown that although the CLD profile becomes broader due to the polymer transfer reactions, they do not significantly change the slope, from which C_m is determined. According to the present simulation results, the CLD method is considered applicable even when the polymer transfer reaction cannot be neglected. The MC simulation method can be used to find the experimental conditions where the CLD method is applicable.     

Study on functionalization of metal surfaces. III. Photopolymerization of monomer films on metal surfaces

The three kinds of monomer films on metal surfaces were deposited by adsorption from a solution of 6-polymerizable substituents-1,3,5-triazine-2,4-dithiol monosodium salts (RTDN); the polymerizable substituents such as cis-9-octadecenylamino, di(cis-9-octadecenyl)amino, and p-vinylbenzyl(cis-9-octadecenyl)amino groups were selected in view of the polymerization activity of unsaturated groups in the substituents and the packing degree of monomer molecules. The monomer films were estimated to consist of mainly 6-substituents-1,3,5,-triazine-2,4-dithione (3H, 5H) and to be multimolecular layers that are considerably cross-packed and ordered. The monomer films on metal surfaces were polymerizable under a UV light irradiation in air atmosphere to give polymer films. In the photopolymerization, azobis(isobutyronitrile) (AIBN) was very effective for increasing the monomer conversion and the polymerization rate. The optimum concentration of AIBN in monomer films was very small, about 0.025 mol %. The monomer conversion was influenced by the kind of monomers, namely, the polymerization activity and the packing degree. The effect of the packing degree was especially remarkable. The monomer conversion decreased with an increase in the thickness of monomer films. This is because the polymerization was initiated by oxygen and AIBN, which were diffused into the inner of monomer films. The possibility of polymerization of the unsaturated groups and the thione groups in monomer molecules under UV light irradiation is discussed.     

A General Autofluorescence Method to Characterize Polymerization Progress

An autofluorescence technique to characterize polymerization progress in real time/in line was developed, which functioned in the absence of typical fluorogenic groups on the monomer or polymer. The monomer dicyclopentadiene and polymer polydicyclopentadiene are hydrocarbons that lack traditional functional groups for fluorescence spectroscopy. Here, the autofluorescence of formulations containing this monomer and polymer during ruthenium-catalyzed ring-opening metathesis polymerization (ROMP) was harnessed for reaction monitoring. The methods fluorescence recovery after photobleaching (FRAP) and here-developed fluorescence lifetime recovery after photobleaching (FLRAP) characterized polymerization progress in these native systems—without requiring exogenous fluorophore. (Auto)fluorescence lifetime recovery changes during polymerization correlated linearly to degree of cure, providing a quantitative link with reaction progress. These changing signals also provided relative rates of background polymerization, enabling comparison of 10 different catalyst-inhibitor-stabilized formulations. Multiple-well analysis demonstrated suitability for future high-throughput evaluation of formulations for thermosets. The central concept of the combined autofluorescence and FLRAP/FRAP method may be extendable to monitoring other polymerization reactions previously overlooked for lack of an obvious fluorescence handle.     

Synthesis and cationic ring-opening polymerization of mono- and bifunctional spiro orthoesters containing ester groups and depolymerization of the obtained polymers: An approach to chemical recycling for polyesters as a model system

A spiro orthoester having an ester moiety, 2-acetoxymethyl-1,4,6-trioxaspiro[4.6]undecane (4) was synthesized, and its cationic polymerization and depolymerization of the obtained polymer (5) were carried out. The monomer 4 underwent cationic polymerization with a cationic catalyst to afford the corresponding poly(cyclic orthoester) 5. The obtained polymer 5 could be depolymerized with a cationic catalyst to regenerate the monomer 4 in an excellent yield. Further, bifunctional spiro orthoesters (6, 8, 9) having diester moieties were synthesized from terephthalic acid, succinic acid, and 1,4-cyclohexanedicarboxylic acid, and their acid-catalyzed reversible crosslinking–decrosslinking was examined. The bifunctional monomer 6 derived from terephthalic acid underwent cationic crosslinking to afford the corresponding network polymer (7), which could be also depolymerized to regenerate the original bifunctional monomer 6. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2551–2558, 1999