Alkaloid synthesis via the intramolecular imidate methylide 1,3-dipolar cycloaddition reaction

A concise synthesis for the neurotoxic physostigmine alkaloid d,l-eserethole is described which relys upon an intramolecular cycloaddition reaction involving a “non-stabilized” imidate methylide and an unactivated alkene. The facility of this cyclization is enhanced by the rigid alignment inforced upon the dipole and dipolarophile by their ortho-disposition on an aryl nucleus. The synthetic limitations of this annulation method were revealed in an attempted synthesis of the erythrina skeleton. In this instance, prototropic rearrangement of the imidate methylide to the isomeric enamine occurred to the exclusion of the desired cyclization reaction.     

A convenient synthesis of muscimol by a 1,3-dipolar cycloaddition reaction

A simple and large scale approach to the synthesis of muscimol 7 has been developed starting from the easily available dibromoformaldoxime 1.     

A facile synthesis of novel 1,2-diazepino[3,4-b]quinoxalines by a 1,3-dipolar cycloaddition reaction

The 1,3-dipolar cycloaddition reaction of the quinoxaline 4-oxides 4a,b with 2-chloroacrylonitrile gave the 2,3-dihydro-1H-1,2-diazepino[3,4-b]quinoxalines 5a,b , respectively, which were converted into the 2,3,4,6-tetrahydro-1H-1,2-diazepino[3,4-b]quinoxalines 7a,b and 8a,b , respectively.     

A facile and regioselective synthesis of rimonabant through an enamine-directed 1,3-dipolar cycloaddition

Rimonabant is a high-potency cannabinoid type-1 (CB₁) receptor inverse agonist that has recently been approved in the European Union as a treatment for obesity. Current methods of synthesis require several steps that have long reaction times and/or lack regioselectivity. Here we present a novel, regioselective synthesis of rimonabant though an enamine-directed 1,3-dipolar cycloaddition. In addition, we present a new and more reactive hydrazonoyl halide for the generation of the requisite nitrile imine dipole.     

A facile synthesis of pyrazoles with multi-point structural diversity by 1,3-dipolar cycloaddition

We describe the synthesis of diverse pyrazoles by 1,3-dipolar cycloaddition of ethyl diazoacetate with various acetylenes in refluxing toluene. The product pyrazoles are useful starting points for preparing a diverse collection of trisubstituted pyrazole carboxamides. For aryl and heteroaryl alkynes a single product is obtained while alkyl alkynes afford a ca. 6:1 mixture of regioisomers. The observed regioselectivity for the cycloaddition step and the ease of reaction are consistent with predictions derived from computing the HOMO-LUMO energies of the reactants.     

Solid-phase synthesis of 1,2,3-triazoles via 1,3-dipolar cycloaddition

The solid-phase synthesis of 1,2,3-triazoles via 1,3-dipolar cycloaddition of polymer-bound azides to various alkynes is reported. Polymer-bound azides were synthesized from polymer-bound halides and sodium azide and reacted with alkynes to produce polymer-bound 1,2,3-triazoles. Cleavage of the triazoles was performed with trifluoroacetic acid. A traceless synthesis of 1,2,3-triazoles was developed using 2-methoxy-substituted resin (polymer-bound 4-hydroxy-2-methoxybenzyl alcohol). In addition, a synthesis of 4-hydroxybenzyl-substituted 1,2,3-triazoles from the bromo-Wang resin (4-(bromomethyl)phenoxymethyl polystyrene) was achieved.     

An expedient regio and diastereoselective synthesis of novel spiropyrrolidinylindenoquinoxalines via 1,3-dipolar cycloaddition reaction

We described an efficient and multicomponent approach for the synthesis of novel polyheterocyclic spiropyrrolidinylindenoquinoxalines via 1,3 dipolar [3+2] cycloaddition reaction of 3-methyl-4-nitro-5-alkenylisoxazoles, ninhydrin, orthophenylenediamine and benzyl amine. Excellent to good yields were obtained. Various isoxazole derivatives were used as dipolarophiles against substituted benzylamine and o-phenylenediamine. Diastereoselectivity was found to be variable and found to be dependent on the substitutions and their position on the aromatic ring of the reactants. This catalyst free and green approach is column free and does not even require a work up procedure.     

One-pot,five-component 1,3-dipolar cycloaddition: A facile synthesis of spiropyrrolidine and spiropyrrolizidine derivatives

A one-pot, five-component strategy toward the synthesis of new indole substituted pyrrolidine and pyrrolizidine heterocycles through 1,3-dipolar cycloaddition reactions using ninhydrin, 1,2-phenylenediamine, amino acids, 3-cyanoacetyl indoles and aryl aldehydes is described. The features of this procedure were characterized by the mild reaction conditions, high yields, one-pot procedure, and operational simplicity.     

Novel synthesis of fused isoxazolidines via a palladium catalysed allene insertion-intramoleculer 1,3-dipolar cycloaddition cascade reaction

A one pot, three component palladium catalysed allenation of aryl iodides, in combination with a nitrone cycloaddition, leads to formation of fused isoxazolidines, creating two rings, two stereocentres and one tetrasubstituted carbon centre.     

Diastereoselective synthesis of 2,3,4,5-tetrasubstituted isoxazolidines via 1,3-dipolar cycloaddition

The 1,3-dipolar cycloaddition reactions of α-2-methoxyaryl nitrones with nitrostyrenes and chalcones have been investigated. The regiochemistry and stereochemistry of the resultant cycloadducts have been determined with the help of NMR spectroscopy and X-ray analysis. β-Nitrostyrenes add to nitrones to give two geometrical isomers, while the β-methyl-β-nitrostyrene gives a single isomer in relatively low yield. The chalcones give a single cycloadduct upon 1,3-dipolar addition.     

Highly regioselective synthesis of glycospiro heterocycles through 1,3-dipolar cycloaddition reaction

A highly regio-selective synthesis of novel glycospiropyrrolidines has been accomplished by 1,3-dipolar cycloaddition (1,3-DC) reaction. A unique dipolarophile derived from galactose has been reacted with azomethine ylide generated from 1,2-diketones and secondary aminoacids to give the corresponding spiro glycoheterocycles in good yields. The structures were assigned by 2D NMR spectra and the regio- and stereochemical outcome of the cycloadducts was established by a single crystal X-ray analysis.     

Regioselective synthesis of 5-trifluoromethyl-1,2,3-triazole nucleoside analogues via TBS-directed 1,3-dipolar cycloaddition reaction

Herein described was a straightforward method for the highly regioselective synthesis of 5-trifluoromethyl-1,2,3-triazole nucleoside analogues, which featured the utilization of tert-butyldimethylsilyl (TBDMS) group as the directing group in the 1,3-dipolar cycloaddition reactions. 4-tert-Butyldimethylsilyl-5-trifluoromethyl-1,2,3-triazole nucleoside analogues were generated as the only cycloaddition products in moderate yields (15-79%) via the treatment of glycosyl azides with 3,3,3-trifluoro-1-tert-butyldimethylsilylpropyne 1 in toluene at 85 °C. Removal of TBS groups in these triazole cycloadducts with tetrabutylammonium fluoride (TBAF) smoothly afforded the various 5-trifluoromethyl-1,5-disubstituted 1,2,3-triazole nucleoside analogues in good yields (40-88%).     

Rapid annulation of tropolone units via a pyrylium ylide 1,3-dipolar cycloaddition reaction

The tropolone subunit of the naturally occurring alkaloid rubrolone aglycon is synthesized via a short reaction sequence starting with a 1,3-dipolar cycloaddition of a pyrylium ylide and indenone, followed by enone oxidation, oxygen-bridge elimination and finally hydroxy group oxidation.     

Synthesis of celecoxib via 1,3-dipolar cycloaddition

A regioselective 1,3-dipolar cycloaddition reaction between a nitrile imine and an enamine is described for the preparation of celecoxib. Nitrile imines are generated in situ from the corresponding hydrazonoyl benzenesulfonates.     

Diastereoselective synthesis of pyrrolidines via 1,3-dipolar cycloaddition of a chiral azomethine ylide

1,3-Dipolar cycloaddition of d-glucose-derived azomethine ylides for the synthesis of chiral pyrrolidines accompanied an unexpected 1,2-elimination in the furanose moiety of the products. The C3′ alkoxy/hydroxy group of the furanose moiety was invariably eliminated under the reaction conditions. Also, in contrast to the previous reports, moderate to good exo-diastereoselectivity was observed in the reaction products.     

Microwave-assisted facile synthesis of [a]-annelated pyrazolopyrroloindoles via intramolecular azomethine imine 1,3-dipolar cycloaddition

The synthesis of [a]-annelated pyrazolopyrroloindoles via intramolecular 1,3-dipolar cycloaddition of in situ generated azomethine imine from N-allylated indole-2-carboxaldehyde, in regio- and stereoselective manner by using microwave irradiation is described. A one-pot strategy for the expedient synthesis of pyrazolopyrroloindoles has been developed.     

A sort synthesis of polyhydroxylated pyrrolizidines via sequential 1,3-dipolar cycloaddition and reductive amination

Polyhydroxylated pyrrolizidines bearing a methyl group at C-5 have been synthesized by 1,3-dipolar cycloaddition of five membered cyclic nitrones with methyl vinyl ketone followed by a N–O reductive cleavage and in situ intramolecular reductive amination. The stereochemistry of the obtained compounds is examined in relation to the reactions mechanism.     

A facile synthesis of ferrocene grafted N-methyl-spiropyrrolidines through 1,3-dipolar cycloaddition of azomethine ylides

One-pot synthesis of novel ferrocene grafted N-methyl-spiropyrrolidines has been accomplished in good yields through a facile 1,3-dipolar cycloaddition reaction of various azomethine ylide derived from ninhydrin and sarcosine with various ferrocene derivatives as dipolarophile. The regiochemical and stereochemical outcome of the cycloaddition reaction is ascertained by X-ray crystallographic studies of one of the cycloadducts.     

N-heterocyclic carbene-catalyzed 1,3-dipolar cycloaddition reactions: a facile synthesis of 3,5-di- and 3,4,5-trisubstituted isoxazoles

A first example of organo-N-heterocyclic carbene (NHC) catalyzed click-type fast 1,3-dipolar cycloaddition of nitrile oxides with alkynes was developed for the regioselective synthesis of 3,5-di- and 3,4,5-trisubstituted isoxazoles. Triethylamine (Et(3)N) was employed as an effective base to generate both nitrile oxide and the organo-NHC catalyst in situ. This catalytic approach was used to attach a variety of substituents, including other biologically active fragments, onto the isoxazole ring to selectively design multinucleus structures. Further, we have also optimized the conditions for Cu(I)-free Sonogashira cross-coupling to obtain internal alkynes in high yields, which were subsequently used in cycloaddition. A catalytic cycle is proposed and the remarkable regiocontrol in the formation of isoxazoles was ascribed to a beneficial zwitterion intermediate developed by the interaction of the strongly nucleophilic organo-NHC catalyst with alkyne followed by nitrile oxide.