Self‐Assembling Nanomaterials using Magnetic Nanoparticles Modified with Polystyrene Brushes

Magnetic nanomaterials have been studied in order to generate novel nanocomposites that display both the magnetic properties of the nanoparticles and the ability to self‐assemble of the amorphous block copolymer matrix. Towards this goal, iron oxide magnetic nanoparticles have been modified with PS brushes by ATRP in order to improve both the dispersion and the affinity of the nanoparticles with one of the blocks of a polystyrene‐block‐polybutadiene‐block‐polystyrene block copolymer. This method of preparation of nanocomposites opens new strategies for the generation of magnetic nanomaterials. The samples are characterized using DSC and atomic and magnetic force microscopies.

     

Modification of poly(vinyl alcohol) through reaction with phosphorus-containing reactants

Crosslinked products of the form: and have been formed from the interfacial condensation of phosphorus diacid halides with poly(vinyl alcohol). Product yield and amounts of phosphorus reactant included in the product increases as the amount of base increases. Product stability in aqueous systems decreases in the order neutral > base > acid.     

Massenspektrometrische Untersuchung organischer Stickstoffverbindungen. XXVII—Intramolekulare Redoxreaktionn bei ionisierten ortho-substituierten Nitroaromaten

Collisional activation demonstrates that the stable ions from o-nitrobenzaldehydedimethylacetale possess the structure of ionized o-nitroso benzoic acid methyl ester. Contrary to previous conclusions it is demonstrated that the structure of the stable ions (m/e 135) from different precursors [i.e. o-nitrobenzyl alcohol o-nitrobenzyl cyanide and o-nitrobenzaldoxime is best represented by 2,1-benzisoxazoline-3-one. Ionized o-nitrosobenzaldehtde rearranged to 2,1-benzisoxazoline-3-one prior to collision induced decomposition, whereas 2-benzoxazolinone and 3-hydroxy-1,2-benzisoxazole do not rearrange within 10^?5 s.     

Batch Emulsion Polymerization of Styrene Stabilized by a Hydrophilic Macro‐RAFT Agent

Summary: A well‐defined homopolymer of 2‐(diethylamino)ethyl methacrylate has been synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization using (4‐cyanopentanoic acid)‐4‐dithiobenzoate as a chain transfer agent. The corresponding protonated homopolymer with a very reactive dithiobenzoate end group has been used as a water‐soluble macromolecular chain transfer agent in the batch emulsion polymerization of styrene without any surfactant. The reaction leads to a stable latex, as a result of the in‐situ formation of an amphiphilic block copolymer stabilizer, via transfer reaction to the dithioester functions during the nucleation step. The work does not intend to apply controlled free‐radical polymerization in an aqueous dispersed system but takes advantage of the RAFT technique to create a well‐defined polyelectrolyte, with a high chain‐end reactivity.

Schematic of the formation of the stabilized latex by the in situ formation of an amphiphilic block copolymer stabilizer.     

Synthesis of a new class of spiro heterocycles

A new class of spiro heterocycles viz., spiropyrazolidinediones, isoxazolidinediones, pyrimidinetriones or thioxopyrimidinediones are developed from methyl 3‐aryl‐2‐(Z‐arylethenenylsulfonyl)acrylate by double Michael addition reaction with dimethyl malonate followed by cyclocondensation with appropriate nucleophiles.     

Photoinitiated polymerization of vinyl monomers by benzophenone t-butyl peresters

Benzophenone peresters undergo efficient photodecomposition when irradiated at 366 nm. This article reports peresters derived from benzophenone p,p′-dicarboxylic acid 1 which may produce radicals at two different centers in the same molecule. These peresters represent a unique new example of an efficient photoinitiator for acrylate and styrene polymerization.      

Electron-impact and thermal fragmentation patterns of some cyclic fluoroethers

The mass spectra of cyclic fluoroethers of the general formula (n = 1 to 4) are reported and discussed. Although these spectra show many similar features, those for which n = 3 and 4 contain intense peaks at m/e 63 which are only of relatively low intensity in the spectra of the other two. A similarity between the electron-impact and thermal fragmentation patterns of these compounds is noted.     

Copolymerization of Hepta‐1,6‐diene with Ethylene Catalyzed by Cobalt Complexes

Copolymerization of hepta‐1,6‐diene with ethylene using a cobalt–bis(imino)pyridine complex affords a polymer that contains trans‐1,2‐five‐membered rings in the repeating unit from hepta‐1,6‐diene. The ratio of the repeating units of diene to those of ethylene is controlled from 3: 97 to 50:50, depending on the reaction conditions. Isotope‐labeling reactions reveal that the major chain transfer pathway involves β‐hydrogen elimination of the polymer end formed after ethylene insertion.

     

Palladium‐catalyzed cyclization of 3‐bromopyridine‐4‐carbaldehyde with carbon monoxide and carboxylic acids

3‐Bromopyridine‐4‐carbaldehyde is cyclized with carboxylic acids in acetonitrile at 100° under carbon monoxide pressure in the presence of a catalytic amount of a palladium catalyst along with a base to afford the corresponding 3‐oxo‐1,3‐dihydrofuro[3,4‐c]pyridine‐1‐yl alkanoates in moderate to good yields.     

Electron impact studies. CVII—Negative ion mass spectra of the oxime group. Monoximes derived from α-dicarbonyl systems

Specific losses of water are observed from the molecular anions of monoximes of α-diketones. Labelling studies, kinetic energy release values and the +E spectra of ions have been used to aid in the elucidation of the fragmentation pathways. It is proposed that the majority of ions have α-keto nitrile structures.     

Oxazolidines versus schiff bases

The formation of oxazolidines from propionaldehyde and aliphatic β-aminoalcohols is complicated by the appearance of appreciable amounts of unsaturated Schiff bases. The simple Schiff base, often the dominant species when aromatic aldehydes react with amines, could not be detected in the present aliphatic systems. We conclude that in aliphatic systems the order of stability is and . The gem-dimethyl group α to nitrogen stablizes the heterocyclic ring remarkably.     

Structure of the tetramer of α-methylstyrene

The structure of the tetrameric dianion formed by α-methylstyrene in tetrahydrofuran by reaction with sodium has been examined. Mass spectral, NMR, infrared, and kinetic data all indicate that the structure is rather than the structure which had previously been assumed for this species.     

Effects of molecular weight,rubber toughening,and environment on fatigue crack propagation behavior of block amide copolymers

The Fatigue Crack Propagation (FCP) behavior of block amide copolymers is investigated as a function of molecular weight, rubber toughening as well as environmental conditions. The enhancement of FCP resistance with increasing average molecular weight is shown and correlated to features observed on the fracture surface. Particular attention is paid to hysteretic heating, measured with an infrared camera, in the crack tip zone of different average molecular weight copolymers and rubber-toughened copolymer. A FCP approach of stress-cracking in an aqueous solution of zinc chloride is proposed here. An improvement in FCP resistance as the average molecular weight increases, similar to that exhibited in normal environment, appears. The shift in da/dN values over the tested range of can be approximated by an exponential function:      

Synthesis and radical ring-opening polymerization of spiro o-carbonates

Syntheses and radical ring-opening polymerization of spiro o-carbonates(I-IV) were investigated. These polymers were yellow powders and soluble in common organic solvents. The infrared and NMR spectra indicated that the polymers were alternate copolymers of either and carbonate containing double bonds. The polymerization mechanism is discussed.     

Le Spectre de L'Alcool Propargylique en Fonction du pH. Un Exemple de Transferts Protoniques Complexes sur un Diacide Organique

Dimethyl sulphoxide (DMSO) is used as a solvent to investigate the kinetic acidity of very weak organic diacids by ¹H d.n.m.r. An inspection of the spectrum of propargyl alcohol as a function of the pH allows the assignment of various proton transfer mechanisms:      

Effect of gegen ion in cationic polymerization and copolymerization of trioxane

p-Chlorophenyldiazonium hexafluorophosphate has been reported to be a superior catalyst for cationic polymerization and copolymerization of trioxane as compared to boron trifluoride dibutyl etherate (BF₃·Bu₂O)¹. In the present investigation the effect of anions derived from elements in Group VA, AsF and SbF, has been ascertained. It has been concluded that p-chlorophenyldiazonium hexafluoroarsenate is also a superior catalyst to boron trifluoride dibutyletherate (BF₃·Bu₂O), while p-chlorophenyl-diazonium hexafluoroantimonate is inferior. Copolymers with the highest polymer yield (>95%) and molecular weight (intrinsic viscosity = 4 to 5) were obtained with Simple dependences on catalyst concentration have been observed to hold for a wide catalyst concentration range ([M]/[C]) = (1 to 20) × 10⁵: For the same relationships hold. However, the polymer yield (75%) and molecular weights (intrinsic viscosity ?1) are considerably lower while the extent of chain transfer is higher. Furthermore, the polymerization proceeds with explosive violence. The quantitative aspects resulting from polymerization, for the most part, can be interpreted in terms of the extent of dissociation of the propagating ions.     

Regioregular Poly(3‐hexylthiophene) in a Novel Conducting Amphiphilic Block Copolymer

Regioregular poly(3‐hexylthiophene) has been successfully incorporated into a novel amphiphilic block copolymer. The amphiphilic nature of poly(3‐hexylthiophene)‐block‐poly(acrylic acid) has been investigated using spectroscopic methods and has yielded solvatochromic behavior in several solvents of varying polarity. Evidence suggests that a supramolecular, long range ordering of block copolymer occurs in polar solvents, resulting in the formation of aggregates. Despite relatively large amounts of non‐conductive blocks, the poly(3‐hexylthiophene) diblock copolymer yields a high conductivity of 1 S · cm⁻¹, and atomic force microscopy shows the formation of a highly organized nanofibrilar morphology in the solid state.

     

High yield synthesis of 4H‐1,4‐benzothiazine‐1,1‐dioxide derivatives

4H‐1,4‐Benzothiazine‐1,1‐dioxide derivatives were synthesized through a sequence of almost quantitative reactions. The commercial starting material 2‐(methylsulfanyl)aniline was Boc‐protected, N‐acylated and oxidized at the sulfur atom to obtain a sulfonyl derivative. An anionic transposition of the acyl group followed by asimultaneous deprotection‐cyclization gave the title products in excellent yields. All products and intermediates were fully characterized.     

Order and Phase Behavior of a Cylinder Forming Diblock Copolymers and Nano‐Particles Mixture in Confinement: A Molecular Dynamics Study

We study a coarse grained model of cylinder forming diblock copolymers and nano‐particles (NPs) mixture confined between Lennard–Jones hard walls. Two models for non‐selective interactions between monomers and NPs are applied. In the case of purely repulsive interactions between NPs and monomers (athermal case) strong segregation of NPs at the film surfaces and the formation of droplets of particles inside the copolymer film can be observed. For weakly attractive interactions between NPs and monomers (thermal case) formation of droplets of particles disappears and segregation on the film surfaces depend on temperature. The uptake of NPs by the copolymer film in the thermal case displays a non‐monotonic dependence on temperature which can be qualitatively explained by a mean‐field model. In both cases of non‐selective interactions NPs are preferentially localized at the interface between the microphase domains.

     

Darstellung und Eigenschaften von Ti-substituierten N-Heterocyclen

Preparation and Properties of Ti-substituted N-Heterocycles The compounds (x = 2 to 6) have been prepared by transamination of Ti(NMe₂)₄ with the heterocyclic amines and have been characterised by elemental analyses and ¹H NMR and IR spectroscopy. The dependence on both x and n of the thermal decomposition has been studied for the series and . The results can be interpreted in terms of the steric strain of the R₂N and substituents. Apart from the piperidido groups none of the ligands exhibit protective group properties comparable to the R₂N groups.