Interaction of oxygen (O+7) ion beam on polyaniline thin films

High-energy ion beam irradiation of the polymers is a good technique to modify the properties such as electrical conductivity, structural behaviour and mechanial properties. Polyaniline thin films doped with hydrochloric acid (HCl) were prepared by oxidation of ammonium persulphate. The effect of Swift Heavy Ions irradiation on the electrical and structural properties of polyaniline has been measured in this study. Polyaniline films were irradiated by oxygen ions (energy 80 MeV, charge state O⁺⁷) with fluence varying from 1 × 10¹⁰ to 3 × 10¹² ions/cm². The studies on electrical and structural properties of the irradiated polymers were investigated by measuring V-I using four probe set-up and X-ray diffraction (XRD) using Bruker AXS, X-ray powder diffractometer. V-I measurements shows an increase in the conductivity of the film, XRD pattern of the polymer shows that the crystallinity improved after the irradiation with Swift Heavy Ions (SHI), which could be attributed to cross linking mechanism.      

Cd(Ⅲ)、Co(Ⅲ)、Cu(Ⅲ)与异烟酸的配合物合成与性质

以异烟酸为配体合成了Cd(Ⅱ)、Co(Ⅱ)、Cu(Ⅱ)3种配合物,用X-射线单晶衍射研究了其结构,3种配合物具有类似的六配位结构,由于Jahn-Teller效应使Cu(Ⅱ)的配合物的结构为一伸长的八面体;3个配合物的配位原子均为4个水分子的氧原子和两个异烟酸根的氮原子,羧基仅参与形成氢键。对配合物的热稳定性进行了研究,并对Cd(Ⅱ)配合物非等温热分解动力学方程和动力学参数进行了拟合,结果表明动力学补偿效应方程与数据拟合方法无关。     

Facile synthesis of group-I elements (K,Li and Na)-doped nanostructured CdO films

In this study, we report an application of facile and low-cost successive ionic layer adsorption and reaction method to investigate nanostructured CdO films. We have tried to enhance some physical properties of nanostructured CdO films by group-I (K, Li and Na) elements doping. The crystal structures, morphology, absorption, transmittance, reflectance behaviour and optical band gap values of CdO films were characterized by using X-ray diffraction (XRD), scanning electron microscopy and ultraviolet–visible spectroscopy techniques. XRD analysis reveals formation of CdO cubic crystalline structure. From these characterizations, it was seen that there are important distinctions in the structural, morphological and optical properties of undoped and K-, Li- and Na-doped nanostructured CdO films.     

Dual-frequency power ultrasound effects on the complexing index,physicochemical properties,and digestion mechanism of arrowhead starch-lipid complexes

Multi-scale structural interactions of the arrowhead starch-linoleic/stearic acid complexes under different durations (20, 40 & 60 min) of dual-frequency power ultrasound (DFPU, 20/40 kHz) and their underlying mechanisms were discussed. Differential scanning calorimetry and X-ray diffraction (XRD) revealed V6 type (V6-I, II) crystalline structure for ultrasonically-treated arrowhead starch-linoleic acid (UTAS-LA) complexes. An increased degree of short-range molecular order as IR ratios of 1045/1022 cm⁻¹ was evident from the FTIR results. The complexing index (CI) values of the complexes were greater than 65%, and the highest CI values of 83.04% and 81.26% were found in the case of UTAS-LA40 and UTAS-LA60, respectively. SEM results showed that LA-complexes had a sponge-like structure with smooth surfaces, while the SA-complexes exhibited flaky structures with irregular shapes and rough surfaces. The V-type complexes exhibited a higher digestion resistance than native AS and un-sonicated AS-LA/SA complexes due to partial RDS convention to RS.     

Structural and optical properties of WO<Subscript>3</Subscript> electrochromic layers prepared by the sol-gel method

Thin layers of tungsten trioxide have been prepared from an aqueous solution of peroxotungstic acid (PTA) using the sol-gel method. Compositional, structural and optical characteristics of WO₃ coated on indium tin oxide (ITO) conductive glass substrates were studied using X-ray diffractometery (XRD), cyclic voltammetery (CV), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). Monoclinic and triclinic crystalline structures for thin film and powdered WO₃ were confirmed by XRD analysis. SEM micrograph of annealed samples revealed micro cracks due to a decrease in density and a contraction of layers. EDX analysis showed that 1∶2 ratio of oxygen and tungsten atoms in the prepared films is obtained at heat treatment temperatures higher than 200 °C. Furthermore, the annealed samples showed very good electrochromic behavior in cyclic voltammetery studies. Refractive index “n” and extinction coefficient “k” values were found to be reduced by increasing the wavelength and decreasing the temperature.     

Spectroscopic Characterizations of Metal-Complexes of 4-Hydroxybenzoic Acid With the Ni(Ⅱ), Mn(Ⅱ), and Cu(Ⅱ) Ions

One of the phenolic acids is 4-hydroxybenzoic acid (HBA) which takes the form of a white crystalline solid with a molecular formula of C₇H₆O₃, a melting point of 214.5 ℃ and a molecular weight of 138.12 g·mol-1. It soluble in polar organic solvents like acetone and alcohols, and slightly soluble in chloroform and water. The reactions between the metal ions and the HBA were carried out under specific conditions like (molar reaction was 2∶2 (ligand to metal), reaction temperature was 60 ℃, media was neutral (pH 7), and solvent was H₂O ∶MeOH (1∶1). Under these conditions, the HBA was deprotonated to form (HOC₆H₄CO-₂; L-). The ligand L- was coordinated to the metal ions forming the metal complexation. The reaction of 4-hydroxybenzoic acid (HOC₆H₄CO₂H; HL) with the Ni(Ⅱ), Mn(Ⅱ) and Cu(Ⅱ) ions afford metal-complexes with gross formula of [Ni₂L₂(NO₃)₂(H₂O)₄], [Mn₂L₂(NO₃)₂(H₂O)₄] and [Cu₂L₂(NO₃)₂(H₂O)₄], respectively. These complexes were characterized by elemental analysis (CHN), magnetic susceptibility, UV-Vis spectra, infrared (IR), and X-ray powder diffraction (XRD) techniques. The complexes of HBA are insoluble in common solvents and hence molar conductance could not be measured, but this very insolubility indicates that the complexes are neutral. Data has demonstrated that the ligand (L-) was coordinated to the metal ion by bidentate bridging carboxylate group (COO-), with an octahedral geometry. Thus, HBA is expected to act as bidentate uninegative ions and the coordination number of the metal ions is six. XRD results showed that the complexes possess uniform and organized microstructures in the nanometer range with a main diameter in the range of 11～28 nm.     

A novel method for preparation of 8-hydroxyquinoline functionalized mesoporous silica: Aluminum complexes and photoluminescence studies

8-Hydroxyquinoline (8-HQ) was attached to mesoporous silica by sulfonamide bond formation between 8-hydroxyquinoline-5-sulfonyl chloride (8-HQ-SO₂Cl) and aminopropyl functionalized SBA-15 (designated as SBA-SPS-Q) and then aluminum complexes of 8-HQ was covalently bonded to SBA-SPS-Q using coordinating ability of grafted 8-HQ.The prepared materials were characterized by powder X-ray diffraction (XRD), nitrogen adsorption-desorption, Fourier transform infrared (FT-IR), thermal analysis (TGA-DTA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), elemental analysis and fluorescence spectra. The environmental effects on the emission spectra of grafted 8-HQ and its complexes were studied and discussed in details.     

Synthesis and Structural Characterizations of Ternary Iron(Ⅱ) Mixed Ligand Complex: Low Cost Materialsas a Precursor for Preparation of Nanometric Fe_2O_3 Oxide

The reaction of the ligands, ethylenediaminetetraacetic acid terasodium salt (Na₄EDTA) and N-N heterocyclic diamines like2,2’-bipyridine (bipy) with iron(Ⅱ) sulfate with 1∶2∶2 stoichiometric ratios form the mononuclear ternary complex of formulae, [Fe₂(EDTA)(bipy)₂] at pH~7. The FTIR and Raman laser spectra of the iron(Ⅱ) complex show that 2,2’-bipyridine is present asa bidentate ligand and the ethylenediaminetetraacetic acid terasodium salt as monodentate carboxylate anion. The electronic spectra and magnetic moments data suggest the six coordination number. It has two iron(Ⅱ) centers in octahedral environments, which are interlinked by carboxylato-O atoms of ethylenediaminetetraacetate and by nitrogen atoms of the two 2,2-bipyridine ligands in a chelating mode. Thermal analysis study show thatiron(Ⅱ) complex containing EDTA and 2,2’-bipyridine on its thermalde composition form the corresponding Fe₂O₃ oxide in nano size at the temperature range ~475 ℃. The iron(Ⅱ) complex was performed as a convenient low cost precursor for the preparation of Fe₂O₃ nanoparticles by the the thermal decomposition method. The iron(Ⅲ) oxide composition has been discussedusing FTIR, X-ray diffraction (XRD), transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDX).     

Influence of bismuth nitrate doping towards the characteristics of L-Alanine nonlinear optical crystals

In the present study, an amino acid derivatives, L-alanine (LA) and Bismuth nitrate-doped L-alanine (BNLA) crystals were grown by the slow evaporation technique. The crystal structure and quality of the grown crystal were examined by single-crystal X-ray diffraction (XRD) and powder XRD. The X-ray diffraction analysis of LA and BNLA crystals confirmed the orthorhombic crystal system without any internal structural grain boundaries. The optical properties of the LA and BNLA crystals have been determined using UV-Visible spectroscopy and Photoluminescence (PL). The second harmonic generation (SHG) efficiency of the crystal was measured using Kurtz powder technique. The dielectric constant measurement was performed at room temperature for different frequencies. Photoconductivity tests show that the LA and BNLA crystals have negative photoconductivity value. On testing of the retentivity or remanent magnetization, the BNLA crystal has increased values as compared to the pure LA crystals, in addition to the observation of changes in coercivity. Further, the observation of maximum intensity peak for the BNLA crystal at 346.9 nm pointed out that the crystal has blue fluorescence emission. The third-order nonlinear optical properties of the grown crystal were studied using Z-scan technique. The enhancement in nonlinear refractive index and third-order NLO susceptibility value shows that the grown BNLA crystals may be of good quality and less in defect than that of pure LA crystals.     

Synthesis,Spectral Characterization,and Antimicrobial Activities of Schiff Base Complexes Derived From 4-Aminoantipyrine

Novel cobalt (II), nickel (II), copper (II), and zinc (II) complexes were synthesized from Schiff base ligand derived from 4-aminoantipyrine, vanillin, and o-anisidine. The structural features were derived from their elemental analysis, molar conductance, magnetic measurements, and various spectroscopic techniques such as infrared, ultraviolet visible, nuclear magnetic resonance, and electron paramagnetic resonance spectroscopy. Antimicrobial screening tests were performed against bacteria and fungi. The comparative study of the minimum inhibitory concentration values of the Schiff base and its metal complexes indicate that the metal complexes exhibit greater antimicrobial activity than the free ligand.     

Structural, optical and electromagnetic properties of aluminum-clay nanocomposites

Aluminum pillared and exchanged bentonite particles were synthesized by the ion exchange method. The characteristics of the particles were investigated by Fourier-transform infrared spectra (FTIR), X-ray diffraction (XRD), thermal gravimetric analysis (TGA), scanning electron microscope (SEM), electron dispersive X-ray spectrometer (EDS), reflectance spectrophotometer (RS) and electromagnetic transition instrument (ETI). FTIR spectra showed a successful incorporation of Al complexes into the clay interlayer. The TGA result demonstrated an improvement in thermal stability of the Al-pillared clay compared with the untreated particles. SEM and EDX results showed the presence of aluminum aggregates on the surface of clay. It was also found that Al ions affect electromagnetic properties of the clay particles.     

Halloysite nanotubes grafted hyperbranched (co)polymers via surface-initiated self-condensing vinyl (co)polymerization

Halloysite nanotubes (HNTs) grafted hyperbranched polymers were prepared by the self-condensing vinyl polymerization (SCVP) of 2-((bromoacetyl)oxy)ethyl acrylate (BAEA) and the self-condensing vinyl copolymerization of n-butyl acrylate (BA) and BAEA with BAEA as inimer (AB*) respectively, from the surfaces of the 2-bromoisobutyric acid modified halloysite nanotubes (HNTs-Br) via atom transfer radical polymerization (ATRP) technique. The halloysite nanotubes grafted hyperbranched polymer (HNTs-HP) and the halloysite nanotubes grafted hyperbranched copolymer (HNTs-HCP) were characterized by elemental analysis (EA), Fourier transform infrared (FTIR), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and transmission electron microscope (TEM). The grafted hyperbranched polymers were characterized with Nuclear magnetic resonance (NMR) and the molecular ratio between the inimer AB* and BA in the grafted hyperbranched copolymers was found to be 3:2, calculated from the TGA and EA results.     

X-ray diffraction studies of Pompeian wall paintings using synchrotron radiation and dedicated laboratory made systems

The full identification of artwork materials requires not only elemental analysis but also structural information of the compounds as provided by X-ray diffraction (XRD). This is easily done when taking samples (or micro-samples) from artworks. However, there is an increasing interest in performing non-destructive studies that require adapted XRD systems. Comparative study of synchrotron high-resolution X-ray powder diffraction (SR-HRPD) and laboratory non-destructive systems (portable XRD and micro-XRD) is the main objective of this work. There are no qualitative differences among the three systems as for detected phases in the Pompeian wall paintings that were studied, except in the case of minority phases which only were detected by SR-HRPD. The identified pigments were goethite, hematite, cinnabar, glauconite, Pompeian blue, together with calcite, dolomite and aragonite. Synchrotron XRD diagrams show better resolution than the others. In general, the peak widths in the diagrams obtained with the portable XRD system are similar to those obtained by micro-diffraction equipment. Factors such as residual divergence of X-ray sources, incidence angle and slit or collimator size are discussed in relation with the quality of XRD diagrams.     

Local structure and optical absorption characteristic investigation on Fe doped TiO_2 nanoparticles

The local structures and optical absorption characteristics of Fe doped Ti O2 nanoparticles synthesized by the sol-gel method were characterized by X-ray diffraction(XRD), X-ray absorption fine structure spectroscopy(XAFS) and ultraviolet-visible absorption spectroscopy(UV-Vis). XRD patterns show that all Fe-doped Ti O2 samples have the characteristic anatase structure. Accurate Fe and Ti K-edge EXAFS analysis further reveal that all Fe atoms replace Ti atoms in the anatase lattice. The analysis of UV-Vis data shows a red shift to the visible range. According to the above results, we claim that substitutional Fe atoms lead to the formation of structural defects and new intermediate energy levels appear, narrowing the band gap and extending the optical absorption edge towards the visible region.     

Synthesis,Structural,Spectroscopic Characterization and Biological Properties of the Zn(Ⅱ),Cu(Ⅱ),Ni(Ⅱ),Co(Ⅱ),and Mn(Ⅱ) Complexes With the Widely Used Herbicide 2,4-Dichlorophenoxyacetic Acid

2,4-Dichlorophenoxyacetic acid (2,4-D) is a board-leaf selective herbicide and globally used in agricultural activities. Complexation mode, spectroscopic investigations and biological properties of complexes formed between 2,4-D (C₆H₃Cl₂OCH₂·COOH; HL) with Zn(Ⅱ), Cu(Ⅱ), Ni(Ⅱ), Co(Ⅱ), and Mn(Ⅱ) metal ions were investigated. To characterize the binding mode between 2,4-D and the metal ions, many physicochemical approaches were employed. The complexes obtained are characterized quantitatively and qualitatively by using micro elemental analysis, FTIR spectroscopy, UV-Vis spectroscopy, 1H-NMR, and magnetic susceptibility measurements. Results of these approaches suggested that the gross formula of the complexes obtained with the metal ions were [ZnL₂](2H₂O (1), [CuL₂(H₂O)₂] (2), [NiL₂](3H₂O (3), [CoL₂(H₂O)₂] (4), and [MnL₂(H₂O)₂] (5). In all complexes, two L- anion were coordinated the metal ion by their bidentate carboxylate groups. From the spectral study, all the complexes obtained as monomeric structure and the metals center moieties are six-coordinated with octahedral geometry except Ni(Ⅱ) and Zn(Ⅱ) complexes which existed as a tetrahedral and square pyramidal geometry respectively. The complexes were screened in vitro against several microbes (fungi and bacteria) using Kirby-Bauer disc diffusion method, and data has demonstrated that complex 3 showed excellent antifungal activity.     

Effects of processing on the electrical and structural properties of spray deposited CdS:In thin films

Polycrystalline CdS:In thin films were prepared by the Spray pyrolysis technique (SP) at a substrate temperature T_s=490 °C. The effects of annealing in nitrogen atmosphere at 400 °C and HCl-etching on the electrical and structural properties of the films were investigated. The electrical properties were studied through the analysis of the I-V curves, while the structural properties were studied through the analysis of the X-ray diffraction (XRD) patterns and the scanning electron microscope (SEM) images. An increase in the films’ resistivity was occurred after annealing and/or HCl-etching, which was accompanied by changes in the XRD patterns and SEM images. These changes were related to a phase change from the mixed (cubic and hexagonal) phase to the hexagonal phase which was expected to occur during the aforementioned processes. The X-ray diffraction (XRD) patterns and the scanning electron microscope images confirm this expectation.     

Study of optical band gap, carbonaceous clusters and structuring in CR-39 and PET polymers irradiated by 100 MeV O ions

Commercially purchased CR-39 and PET polymers were irradiated by 100 MeV O⁷⁺ ions of varying fluences, ranging from 1×10¹¹ to 1×10¹³ ions/cm². The effects of swift heavy ions (SHI) on the structural, optical and chemical properties of CR-39 and PET polymers were studied using X-ray diffraction (XRD), UV-visible spectroscopy and Fourier transform infrared (FTIR) spectroscopy. The XRD patterns of CR-39 show that the intensity of the peak decreases with increasing ion fluence, which indicates that the semicrystalline structure of polymer changes to amorphous with increasing fluences. The XRD patterns of PET show a slight increase in the intensity of the peaks, indicating an increase in the crystallinity. The UV-visible spectra show the shift in the absorbance edge towards the higher wavelength, indicating the change in band gap. Band gap in PET and CR-39 found to be decrease from 3.87 to 2.91 and 5.3-3.5 eV, respectively. The cluster size also shows a variation in the carbon atoms per cluster that varies from 42 to 96 in CR-39 and from 78 to 139 in PET. The FTIR spectra show an overall reduction in intensity of the typical bands, indicating the degradation of polymers after irradiation.     

Solid-state polymerization and polymer crystallization

Effects of the molecular and crystal structures of polymerizable substances on their radiation-induced solid-state polymerization are considered for two cases; the solid state polymerization of cyclic oligomers of formaldehyde and the canal polymerization of some monomers.

Cyclic oligomers of formaldehyde (–CH₂–O–)m from m = 3 to 6 are transformed into three-dimensionally oriented crystalline polyoxymethylene by irradiation. The polymer crystals are characteristically oriented, depending upon the parent oligomer crystal structures. A small amount of an oriented, unstable modification (orthorhombic) polyoxymethylene is also obtained in X-ray in-source polymerization of hexoxane.

Highly 1,4-trans tactic polymerization of 2,3-dichloro-1,3-butadiene and 2,3-dimethy1-1,3-butadiene in the thiourea canals is shown by structural evidence, based upon the crystal structure determinations of the monomerthiourea complexes, the polymer-thiourea complexes, and the resultant polymers for both dienes. The conversion of the monomer-thiourea complexes to the polymer-thiourea complexes by irradiation is performed, retaining the original single crystal habit, though in the canals the monomer-monomer distances are shortened by polymerization. The polymer samples obtained from the single crystals of polymer-thiourea complexes by removal of thiourea are uniaxially oriented and have unusual fine structures.     

Laser irradiation effects on the combination of levodopa and carbidopa in the presence and absence of magnetic field

Laser irradiation effects on the combination of levodopa and carbidopa in the presence and absence of magnetic field were studied. The structural and surface morphology of irradiated targets were measured by X-ray diffractometer (XRD) and scanning electron microscopy (SEM), respectively. Energy dispersive X-ray spectrometry (EDS) was used for chemical analysis. XRD analysis indicates increase in grain size for 2?min laser irradiation in the absence of magnetic field, but for 4 and 6?min it revealed decrease in grain size. While grain size decreased at 2 and 4?min exposures in the presence of magnetic field but grain size slightly increased with the increase of exposure time up to 6?min. Micro-nano-sized structures (including hydrodynamic sputtering, splashing and crater) were observed by SEM analysis. EDS displayed peaks for carbon (C) and oxygen (O), but peaks for hydrogen (H) and nitrogen (N) are missing. The present study will provide basis for the use of low-cost and environment-friendly diode laser to enhance the characteristics of this combination (levodopa?+?carbidopa).     

Growth and high pressure studies of zirconium sulphoselenide single crystals

Transition metal trichalcogenides are well suited for extreme pressure lubrication. These materials being semiconducting and of layered structure may undergo structural and electronic transition under pressure. In this paper authors reported the details about synthesis and characterization of zirconium sulphoselenide single crystals. The chemical vapour transport technique was used for the growth of zirconium sulphoselenide single crystals. The energy dispersive analysis by X-ray (EDAX) gave the confirmation about the stoichiometry of the as-grown crystals and other structural characterizations were accomplished by X-ray diffraction (XRD) study. The variation of electrical resistance was monitored in a Bridgman opposed anvil set-up up to 8 GPa pressure to identify the occurrence of any structural transition. These crystals do not possess any structural transitions upto the pressure limit examined.