等离子体技术在医用材料表面改性中的应用

本文从血液相容性、组织相容性、低分子物的渗出、药物缓释等方面出发,对等离子体处理、等离子体聚合、等离子体接枝聚合在医用材料表面改性中的应用作了综合介绍。     

生物医用高分子

生物医用高分子是生物材料的最重要组成部分,是保障人类健康的必需品;其应用不仅挽救了数以千万计人的生命,提高了生命质量,且对医疗技术和保健系统的革新、降低医疗费用也具有引导作用.同时,生物医用高分子又是高分子材料科学     

用于制造人工脏器的高分子材料

本文介绍了医用功能高分子材料的性质以及研制的人工心脏、肺、肾、肝脏、胰脏等器官的类型、功能及特点。它在医学领域方面应用时的要求及必备的条件,并且应具有安全性、稳定性及对生物的适应性。     

生物材料与医用高分子

生物材料与医用高分子冯新德（北京大学化学系北京１００８７１）生物材料（Ｂｉｏｍａｔｅｒｉａｌ）的定义按照第六届国际生物材料年会（１９７４）所定的是“生物材料是一种植入生体活系统内或与活系统相结合而设计的物质，它与生体不起药理反应”，也就是代替或置换生...     

医用聚烯烃材料的开发及应用进展

伴随着塑料工业、医学技术和生物技术的不断发展以及人们对健康的日益关注,医用塑料应用领域已变得越来越广泛。聚烯烃材料由于其安全无毒的特点,已经越来越多地应用在医用领域。迄今为止,聚氯乙烯在国内仍是广泛用作医用材料。基于人体健康和环境安全的考虑,采用更安全、环保的替代品是大势所趋。采用其它更安全环保的聚烯烃材料替代PVC材料的研究将是本领域的一个重要研究方向。本文综述了医用聚烯烃材料的开发和应用现状,阐述了各类聚烯烃材料的主要特点和用途,重点介绍了各类聚烯烃材料研究和开发进展,展望了医用聚烯烃材料的某些可能发展方向。     

医用可生物降解高分子材料

对目前医用可生物降解高分子材料的研究及应用状况分化学合成，天然和生物技术合成三类作了综述。对材料的生物相容性、可生物降解性及物理机械性能进行了分析和比较。并就医用生物降解高分子材料的发展趋势作了预测。     

生物医用PLA改性研究进展北大核心CSCD

聚乳酸(polylactic acid)材料是一种用途广泛的可生物降解高分子材料,已经成为生物医用材料中最受重视的材料之一。但是聚乳酸也存在许多缺陷,限制了其在医药领域的广泛应用。本文综述了聚乳酸疏水性强、细胞亲和性差、力学性能不足,降解产物造成局部酸性积累而导致机体发生无菌性炎症反应,缺乏修复、降解、吸收速度与细胞的增殖、组织修复速度匹配的系列产品,成本高,均聚物成孔性能差等缺陷,总结了近些年国内外针对以上各个缺陷做出的改进方案,并对聚乳酸医用改性的研究发展方向进行了展望。     

医用高分子表面及其血液相容性

本文首先概述了医用高分子表面的表征方法。接着着力讨论材料和血液的相互作用,其中主要阐述目前血液相容性研究所涉及的内容和各种抗凝假设。最后具体介绍了几种常见医用高分子材料的表面特性。     

金黄地鼠与大白鼠尿液成分的比较分析

通过比较分析，发现金黄地鼠尿液中蛋白、尿素氮、钾、钠、钙等明显高于大白鼠；金黄地鼠尿液粘稠，比重大，干枯后显白色，主要与尿液中高磷酸盐结晶、高蛋白及高尿素氮等有关。提出在蛋白尿中大量损失后，仍未见金黄地刀出现蛋白质缺乏性病理变化，其原因值得深究。金黄地鼠能否作为自发性高蛋白尿实验动物模型，有待进一步研究。     

医用聚氯乙烯膜的等离子体表面改性

用两种不同气氛的辉光放电等离子体工艺对医用软质聚氯乙烯（ＰＶＣ）膜进行了表面改性研究。结果表明，聚合性气氛的等离子体改性效果明显优于非聚合性气氛。平整致密的聚合膜对ＰＶＣ增塑剂——邻苯二甲酸二辛酯的迁移和扩散起了阻挡作用，也使膜表面亲水性和表面张力极性成份增大，液固相界面张力减小，生物相容性得以改善。     

Review of Analytical Methods for Atmospheric Oxidants Measurements

Abstract

Instrumental and manual methods currently available for the measurement of atmospheric oxidants are surveyed. Techniques used in the United States are emphasized and their advantages and disadvantages are discussed. Commercial systems are evaluated in terms of general operating principles rather than of specific instruments. The ability of these techniques to meet the measurement requirements defined by U.S. Federal air quality oxidant criteria are discussed. Alternative chemical techniques that may have some advantages over the neutral, buffered KI procedure are discussed. Also some attractive, alternative instrumental procedures that are ozone-specific are presented. These systems are based on chemiluminescence and ultraviolet absorption photometry. Electrochemical and colorimetric methods for total oxidant measurements are compared. Finally, some data are presented on relationships of ozone and total oxidants.     

Densities,speeds of sound,excess volumes and viscosities of binary mixtures of mtbe with tetralin and decalin at 303.15 k

Measurements of densities, speeds of sound, excess volumes and viscosities of binary mixture of methyl tert-butyl ether with tetralin and decalin are reported at 303.15?K over the entire range of composition. Excess volumes are measured using batch dilatometer technique. Sound speeds are obtained using ultrasonic interferometer. Densities are computed from excess volume data. Isentropic compressibilities are derived from density and sound speed data. Speeds of sound are evaluated on the basis of Jacobson's free length theory and Schaff's collision factor theory. The predicted values are in good agreement with the experimental results. The viscosity data are analysed on the basis of corresponding states approach. Excess volumes and deviation in isentropic compressibilities are negative and deviation in viscosities are positive over the entire composition range. The experimental results are discussed in terms of possible molecular interactions between unlike molecules.     

Contactless conductivity detection for microfluidics: designs and applications

Different methods for construction of contactless conductivity detectors (CCD) for microchip electrophoresis device are described in this review. This includes three main schemes of CCD for microchips, such as (i) the detection electrodes are placed along the microchannel from outside of the microchip and they are insulated from the channel by the cover lid of microchip device; (ii) the electrodes are placed across of the microchannel in the same plane and they are insulated by thin separation channel walls and (iii) electrodes are buried in widened part of microchannel and they are insulated from solution by ultrathin layer of silicon carbide. Specific issues related to the CCD on microfluidics are discussed, such as an influence of shape and magnitude of ac voltage and placement of electrodes and their insulation. Various applications for security, pharmacological, bioassays and food analysis purposes are described.     

钼、钨系过氧化物在Sharpless烯烃环氧化反应中的应用*

钼、钨系过氧化物是非常重要的Sharpless烯烃环氧化催化剂,有着非常广泛的工业发展前景。本文综述了钼、钨系过氧化物的种类,结构,合成方法及催化活性,分析了各种钼、钨系过氧化物的特点以及在催化环氧化领域的发展现状。同时,本文还讨论了钼、钨系过氧化物催化烯烃环氧化反应的机理。评述了在催化环氧化领域中两种主要理论——Mimoun机理与Sharpless机理的争论焦点及发展现状,以及计算化学对两种理论中间过渡态的研究进展,并且重点分析了Sharpless机理的过渡态结构。此外,本文还综述了影响钼、钨系过氧化物催化剂反应活性的各种因素以及质子所产生的副反应。最后,本文对应用于催化环氧化领域的钼、钨系过氧化物未来的研究方向提出了建议。     

Some Strategies for the Refinement of Disordered Structures with the SHELXL-97 Refinement Program

1 INTRODUCTION finement stage. The person performing the crysta- llographic manipulations works on numerical data The high degree of order in the arrangement of that are quite different from the diffraction images atoms in a crystal is a fundamental characteristic of on a computer terminal, and most often does not even the crystalline state, an ideal crystal being envisaged see the images. to be constructed of regularly-stacked unit cells, each The refinement program, SHELXL-97[1], has …     

Inorganic electrides

Inorganic electrides are a novel kind of ionic compounds in which the anions are electrons confined in a complex array of cavities or channels and the cations are nanoscale arrays of alkali metal ions that provide charge balance. In electrides the donated electron behaves like a low-density correlated electron gas, whereby the dimensionality of the electron gas and its electronic and magnetic properties are determined by the topology of the cavities in the host matrix. Unlike traditional electrides, in which alkali cations are encapsulated within an organic cage, inorganic electrides are thermally stable. The current inorganic electrides based on alkali metal loaded zeolites can be designed as useful reduced-dimensionality materials. Inorganic electrides are powerful reducing agents, and they are able to reduce small aromatic molecules to the radical anions within the channels of the zeolite.     

纳米SiO2的表面处理及其在聚合物基纳米复合材料中的应用进展

简要介绍了纳米二氧化硅(SiO2)粒子的制备方法、结构和特性,对近年来国内外纳米SiO2的表面处理方法及聚合物/SiO2纳米复合材料的制备方法进行了阐述,并针对不同改性方法和制备方法的特点加以分析比较;讨论了SiO2粒子的分散机理和增强机理,并对未来的研究内容及方向提出展望。     

Synthesis,Redox and Spectroscopic Properties of Pterin of Molybdenum Cofactors

Pterins are bicyclic heterocycles that are found widely across Nature and are involved in a variety of biological functions. Notably, pterins are found at the core of molybdenum cofactor (Moco) containing enzymes in the molybdopterin (MPT) ligand that coordinates molybdenum and facilitates cofactor activity. Pterins are diverse and can be widely functionalized to tune their properties. Herein, the general methods of synthesis, redox and spectroscopic properties of pterin are discussed to provide more insight into pterin chemistry and their importance to biological systems.     

抗生素在水环境中的光化学行为

抗生素是在水环境中广泛存在的一类新兴污染物, 近年来, 由于其“假”持久性并能引起环境菌群的抗药性而备受关注. 光化学降解是水环境中抗生素类污染物的重要消减方式. 本文总结了水环境中抗生素光化学行为研究的最新进展, 介绍了抗生素的直接、间接和自敏化光解动力学, 评述了pH和水中溶解性物质对抗生素光解的影响及典型抗生素的光降解路径与机理, 讨论了抗生素的光致毒性, 最后对抗生素在水环境中光化学行为的研究进行了展望.