Low-temperature solvothermal approach to the synthesis of La4Ni3O8 by topotactic oxygen deintercalation

A chimie douce solvothermal reduction method is proposed for topotactic oxygen deintercalation of complex metal oxides. Four different reduction techniques were employed to qualitatively identify the relative reduction activity of each including reduction with H(2) and NaH, solution-based reduction using metal hydrides at ambient pressure, and reduction under solvothermal conditions. The reduction of the Ruddlesden-Popper nickelate La(4)Ni(3)O(10) was used as a test case to prove the validity of the method. The completely reduced phase La(4)Ni(3)O(8) was produced via the solvothermal technique at 150 °C--a lower temperature than by other more conventional solid state oxygen deintercalation methods.     

The reduction of copper in porous matrices--the role of electrostatic stabilisation

The redox properties of Cu(II) species in FAU matrices have been studied by temperature programmed reduction (TPR) in hydrogen and by XAFS analysis of the products obtained after (stationary) reduction treatments at various temperatures. The influence of the matrix polarity was investigated by comparing aluminosilicate FAU (Y zeolite) with siliceous FAU. In addition, the influence of Zn ions on the reduction process was studied. It was found that both the matrix composition and the presence of zinc ions exert a significant influence on the course of the reduction. In Y zeolite, heat treatment which is known to transfer Cu(II) ions to remote sites (SI, SI', SII') affects the reduction process dramatically. Cu(II) is most easily reduced in siliceous FAU, but the reduction proceeds in two clearly separated steps. Between these steps, small Cu(0) nuclei coexist with Cu(I) species, apparently unable to activate hydrogen for the autocatalytic reduction of the remaining Cu ions. The polarity of the matrix causes an upshift of the Cu(II) reduction temperature (in TPR by ca. 80 K for sites in the large cavity, by ca. 105 K for the remote sites), but the reduction of Cu(I) depends strongly on the simultaneous presence of Cu(0) and on its ability to activate hydrogen and induce an autocatalytic reduction mechanism. While Cu(I) species in the large cavities are easily reduced to the metal, tending to segregate from the zeolite lattice, Cu(I) ions in remote sites are strongly stabilized towards further reduction and even traces of Cu metal form only at very high temperatures. In the presence of zinc ions, the Cu metal particles formed were found to be smaller than in zinc-free samples.     

Reduction of strained polycycles: how much strain can a pyrene anion take?

The reduction of a series of [n](2,7)pyrenophanes (n = 7-10) with lithium or potassium metal shows that the strain in the system, controlled by the length of the tether, determines the nature of the reduction products. The reduction of [7](2,7)pyrenophane (2) and [2]metacyclo[2](2,7)pyrenophane (3) leads to reductive dimerization followed by novel intramolecular sigma-bond formation as a means of escaping strained anti-aromaticity. [8](2,7)Pyrenophane (4) affords only reductive dimerization, and no two-electron reduction is observed. The reduction of [9](2,7) pyrenophane (5) and [10](2,7)pyrenophane (6) leads to reductive dimerization, followed by the formation of a dianionic anti-aromatic species, which eventually cleaves the solvent, THF-d(8). The similarity between the reduction of the latter systems and the reduction of pyrene (1) is discussed.     

Molecular organization and electrochemical reduction of a Ni(II)Porphyrin complex in LB films

In this work, mixed films of a tetra-cationic porphyrin, Ni(II)TMPyP, and an anionic phospholipid, DMPA, in molar ratio of 1:4, were formed at the air–water interface and transferred onto glass and optically transparent indium tin oxide (ITO) electrodes. Transmission spectroscopy (on glass and ITO) and cyclic voltammetry (on ITO) were used to infer the molecular organization and the electrochemical reduction of these LB films. Likewise, we compare the electrochemical reduction of the Ni(II)TMPyP in water solution with that in LB films. The porphyrin molecules in water solution show three two-electron reduction waves, which are related to the two-electron reduction of the central ring of the porphyrin and to the one-electron reductions of the four methyl–pyridyl groups of the molecule, respectively, while only two reversible one-electron reduction waves are observed in LB films corresponding to the reduction of the central ring of the porphyrin and to the Ni(II) to Ni(I) reduction, respectively.     

含氮煤焦还原NO反应路径研究

采用量子化学密度泛函理论结合热力学和动力学分析研究了含氮煤焦还原NO的途径;从微观角度探究了含氮煤焦还原NO的间接还原和直接异相还原两种途径,分析了NO还原过程中的能量变化。结果表明,含氮煤焦先产生中间体NH_2再还原NO(间接还原)的过程决速步能垒值较直接异相还原NO的决速步能垒值高183.76 kJ/mol;由能垒角度分析,含氮煤焦与NO直接发生异相还原的过程更为有利。从热力学角度分析,含氮煤焦直接异相还原NO为可自发进行的单向放热反应,较间接还原过程有利。动力学分析结果表明,含氮煤焦间接还原NO的过程决速步速率常数较直接异相还原至少低10个数量级,说明含氮煤焦直接异相还原NO的路径更容易发生。     

Electrochemical metalloporphyrin-catalyzed reduction of chlorite

We measured the redox stoichiometry and rate constants for the electrochemical reduction of ClO(2)(-) at pH 7, catalyzed by a series of metalloporphyrins of Mn, Fe, and Co with different proximal and distal environments. A clean four-electron reduction was observed. The catalytic activity correlates well with that observed in reduction of H(2)O(2). The axial imidazole and/or a redox-active distal metal (Cu or Co) increases the turnover frequency in several compounds. The metalloporphyrins were inert to ClO(x)(-) (x = 3,4) and IO(3)(-) but catalyzed facile two-electron reduction of IO(4)(-); six-electron reduction of BrO(3)(-) was also observed.     

Kinetics of the reduction of the Rh(111) surface oxide: linking spectroscopy and atomic-scale information

The reduction of the surface oxide on Rh(111) by H(2) was observed in situ by scanning tunneling microscopy (STM) and high-resolution core level spectroscopy (HRCLS). At room temperature, H(2) does not adsorb on the oxide, only in reduced areas. Reduction starts in very few sites, almost exclusively in stepped areas. One can also initiate the reduction process by deliberately creating defects with the STM tip allowing us to examine the reduction kinetics in detail. Depending on the size of the reduced area and the hydrogen pressure, two growth regimes were found. At low H(2) pressures or small reduced areas, the reduction rate is limited by hydrogen adsorption on the reduced area. For large reduced areas, the reduction rate is limited by the processes at the border of the reduced area. Since a near-random distribution of the reduction nuclei was found and the reduction process at defects starts at a random time, one can use Johnson-Mehl-Avrami-Kolmogoroff (JMAK) theory to describe the process of reduction. The microscopic data from STM agree well with spatially averaged data from HRCLS measurements.     

Reduction of CuO and Cu2O with H2: H embedding and kinetic effects in the formation of suboxides

Time-resolved X-ray diffraction, X-ray absorption fine structure, and first-principles density functional calculations were used to investigate the reaction of CuO and Cu(2)O with H(2) in detail. The mechanism for the reduction of CuO is complex, involving an induction period and the embedding of H into the bulk of the oxide. The in-situ experiments show that, under a normal supply of hydrogen, CuO reduces directly to metallic Cu without formation of an intermediate or suboxide (i.e., no Cu(4)O(3) or Cu(2)O). The reduction of CuO is easier than the reduction of Cu(2)O. The apparent activation energy for the reduction of CuO is about 14.5 kcal/mol, while the value is 27.4 kcal/mol for Cu(2)O. During the reduction of CuO, the system can reach metastable states (MS) and react with hydrogen instead of forming Cu(2)O. To see the formation of Cu(2)O, one has to limit the flow of hydrogen, slowing the rate of reduction to allow a MS --> Cu(2)O transformation. These results show the importance of kinetic effects for the formation of well-defined suboxides during a reduction process and the activation of oxide catalysts.     

Reduction of copper in porous matrixes. Stepwise and autocatalytic reduction routes

The reduction of Cu(II) oxide species in siliceous matrixes of different porosity (MFI, FAU, MCM-48) and in alumosilicate MFI was studied by temperature-programmed reduction in hydrogen (TPR), by X-ray absorption fine structure (after stationary hydrogen treatments), and by transmission electron microscopy. It was found that the reduction may proceed in one or in two reduction steps. The two-step scheme known for zeolites was observed also for Cu(II) in siliceous microporous matrixes, with similar temperature of Cu(II) reduction onset as for the alumosilicate MFI. Therefore, the two-step scheme cannot be explained by the stabilization of Cu ions by intra-zeolite electrical fields. CuOx clusters in MCM-48 were reduced in a one-step scheme (similar to bulk CuO) at high Cu content (6 wt %) but in a two-step scheme at low Cu content (1 wt %). The two reduction steps observed with most samples cannot be identified with the transitions of all Cu(II) to Cu(I) and of Cu(I) to Cu(0). Instead, Cu(0) nuclei were observed already at low reduction temperatures and were found to coexist with Cu ions over temperature ranges of different extension. This coexistence range was narrow in materials that favor aggregation of the Cu nuclei into particles: Cu-MCM-48 of low Cu content and Cu-ZSM-5. In the latter, metal segregation from the pore system was found to be accompanied by an autocatalytic initiation of the second reduction step. In the siliceous microporous matrixes, the Cu(0) nuclei were observed to coexist with Cu ions over wide temperature ranges (100 K for MFI) at temperatures far above that of Cu reduction in the bulk oxide. These observations suggest that oligomeric Cu metal nuclei which may have been formed, e.g., at the intersections of the MFI channel system, may be unable to activate hydrogen, which would be required for rapid reduction of the coexisting Cu ions.     

Uranyl-Bound Tetra-Dentate Non-Innocent Ligands: Prediction of Structure and Redox Behaviour Using Density Functional Theory

Computational methods have been applied to understand the reduction potentials of [UO₂-salmnt-L] complexes (L=pyridine, DMSO, DMF and TPPO), and their redox behavior is compared with previous experiments in dichloromethane solution. Since the experimental results were inconclusive regarding the influence of the uranyl-bound tetra-dentate ‘salmnt’ ligand, here we will show that salmnt acts as a redox-active ligand and exhibits non-innocent behavior to interfere with the otherwise expected one-electron metal (U) reduction. We have employed two approaches to determine the uranyl (VI/V) reduction potentials, using a direct study of one-electron reduction processes and an estimation of the overall reduction using isodesmic reactions. Hybrid density functional theory (DFT) methods were combined with the Conductor-like Polarizable Continuum Model (CPCM) to account for solvation effects. The computationally predicted one-electron reduction potentials for the range of [UO₂-salmnt-L] complexes are in excellent agreement with shoulder peaks (∼1.4 eV) observed in the cyclic voltammetry experiments and clearly correlate with ligand reduction. Highly conjugated pi-bonds stabilize the ligand based delocalized orbital relative to the localized U f-orbitals, and as a consequence, the ligand traps the incoming electron. A second reduction step results in metal U(VI) to U(V) reduction, in good agreement with the experimentally assigned uranyl (VI/V) reduction potentials.     

Sonoassisted Microbial Reduction of Chromium

This study presents sonoassisted microbial reduction of hexavalent chromium (Cr(VI)) using Bacillus sp. isolated from tannery effluent contaminated site. The experiments were carried out with free cells in the presence and absence of ultrasound. The optimum pH and temperature for the reduction of Cr(VI) by Bacillus sp. were found to be 7.0 and 37 °C, respectively. The Cr(VI) reduction was significantly influenced by the electron donors and among the various electron donors studied, glucose offered maximum reduction. The ultrasound-irradiated reduction of Cr(VI) with Bacillus sp. showed efficient Cr(VI) reduction. The percent reduction was found to increase with an increase in biomass concentration and decrease with an increase in initial concentration. The changes in the functional groups of Bacillus sp., before and after chromium reduction were observed with FTIR spectra. Microbial growth was described with Monod and Andrews model and best fit was observed with Andrews model.     

Electrocatalytic O2 reduction by covalently immobilized mononuclear copper(I) complexes: evidence for a binuclear Cu2O2 intermediate

A Cu(I) complex of 3-ethynyl-phenanthroline covalently immobilized onto an azide-modified glassy carbon surface is an active electrocatalyst for the four-electron (4-e) reduction of O(2) to H(2)O. The rate of O(2) reduction is second-order in Cu coverage at moderate overpotential, suggesting that two Cu(I) species are necessary for efficient 4-e reduction of O(2). Mechanisms for O(2) reduction are proposed that are consistent with the observations for this covalently immobilized system and previously reported results for a similar physisorbed Cu(I) system.     

Regioselective Reduction of 1H-1,2,3-Triazole Diesters

Regioselective reactions can play pivotal roles in synthetic organic chemistry. The reduction of several 1-substituted 1,2,3-triazole 4,5-diesters by sodium borohydride has been found to be regioselective, with the C(5) ester groups being more reactive towards reduction than the C(4) ester groups. The amount of sodium borohydride and reaction time required for reduction varied greatly depending on the N(1)-substituent. The presence of a β-hydroxyl group on the N(1)-substituent was seen to have a rate enhancing effect on the reduction of the C(5) ester group. The regioselective reduction was attributed to the lower electron densities of the C(5) and the C(5) ester carbonyl carbon of the 1,2,3-triazole, which were further lowered in cases involving intramolecular hydrogen bonding.     

Catalysis of dioxygen reduction at soluble polyaniline modified electrode

A reflux-treatment of soluble polyaniline (SPA) in dimethylformamide (DMF) containing CoCl₂ yields an active catalyst for dioxygen reduction which can be adsorbed on the electrode surface firmly. The catalytic reduction of dioxygen at the glassy carbon (GC) electrode modified by the catalyst was studied with cyclic voltammetry (CV), rotating disk electrode (RDE) and rotating ring-disk electrode (RRDE). The kinetic process of dioxygen reduction at the modified electrode was analyzed with a new RRDE theory dealing with a nondiffusion-controlled process on ring electrode. The rate constants for each scheme of dioxygen reduction were calculated, showing that only 2-electron reduction to H₂O₂ was conducted at the modified electrode. The effect of solution acidity on the electrocatalytic behaviour for dioxygen reduction was investigated. A possibility of initiating catalytic activity for dioxygen reduction was explored with ESCA method.     

Electrochemical reduction of NO by hemin adsorbed at pyrolitic graphite

The mechanism of the electrochemical reduction of nitric oxide (NO) by hemin adsorbed at pyrolitic graphite was investigated. The selectivity of NO reduction was probed by combining the rotating ring disk electrode (RRDE) technique with a newly developed technique called on-line electrochemical mass spectroscopy (OLEMS). These techniques show that NO reduction by adsorbed heme groups results in production of hydroxylamine (NH(2)OH) with almost 100% selectivity at low potentials. Small amounts of nitrous oxide (N(2)O) were only observed at higher potentials. The rate-determining step in NO reduction most likely consists of an electrochemical equilibrium involving a proton transfer, as can be derived from the Tafel slope value of 62 mV/dec and the pH dependence of -42 mV/pH. The almost 100% selectivity toward NH(2)OH distinguishes this system both from NO reduction on bare metal electrodes, which often yields NH(3), and from biological NO reduction in cytochrome P450nor, which yields N(2)O exclusively.     

Photocatalytic reduction of carbon dioxide over Ag cocatalyst-loaded ALa4Ti4O15 (A = Ca, Sr, and Ba) using water as a reducing reagent

Ag cocatalyst-loaded ALa(4)Ti(4)O(15) (A = Ca, Sr, and Ba) photocatalysts with 3.79-3.85 eV of band gaps and layered perovskite structures showed activities for CO(2) reduction to form CO and HCOOH by bubbling CO(2) gas into the aqueous suspension of the photocatalyst powder without any sacrificial reagents. Ag cocatalyst-loaded BaLa(4)Ti(4)O(15) was the most active photocatalyst. A liquid-phase chemical reduction method was better than impregnation and in situ photodeposition methods for the loading of the Ag cocatalyst. The Ag cocatalyst prepared by the liquid-phase chemical reduction method was loaded as fine particles with the size smaller than 10 nm on the edge of the BaLa(4)Ti(4)O(15) photocatalyst powder with a plate shape during the CO(2) reduction. CO was the main reduction product rather than H(2) even in an aqueous medium on the optimized Ag/BaLa(4)Ti(4)O(15) photocatalyst. Evolution of O(2) in a stoichiometric ratio (H(2)+CO:O(2) = 2:1 in a molar ratio) indicated that water was consumed as a reducing reagent (an electron donor) for the CO(2) reduction. Thus, an uphill reaction of CO(2) reduction accompanied with water oxidation was achieved using the Ag/BaLa(4)Ti(4)O(15) photocatalyst.     

Chemoselective Quinoline and Isoquinoline Reduction by Energy Transfer Catalysis Enabled Hydrogen Atom Transfer

(Hetero)arene reduction is one of the key avenues for synthesizing related cyclic alkenes and alkanes. While catalytic hydrogenation and Birch reduction are the two broadly utilized approaches for (hetero)arene reduction across academia and industry over the last century, both methods have encountered significant chemoselectivity challenges. We hereby introduce a highly chemoselective quinoline and isoquinoline reduction protocol operating through selective energy transfer (EnT) catalysis, which enables subsequent hydrogen atom transfer (HAT). The design of this protocol bypasses the conventional metric of reduction reaction, that is, the reductive potential, and instead relies on the triplet energies of the chemical moieties and the kinetic barriers of energy and hydrogen atom transfer events. Many reducing labile functional groups, which were incompatible with previous (hetero)arene reduction reactions, are retained in this reaction. We anticipate that this protocol will trigger the further advancement of chemoselective arene reduction and enable the current arene-rich drug space to escape from flatland.     

Microdetermination of nitrates and nitramines-I Titrimetric methods based on the reduction with iron(II), titanium(III), and a mixture of both

Organic and inorganic nitrates are satisfactorily determined on the microscale by reduction with Fe(II). Titanium(III) reduces the nitrates in strongly acidic, citrate-buffered, and acetate-buffered media with the comsumption of 3, 6 and 8 equivalents respectively of Ti(III) per nitrate group. Nitramines are determined by reduction with a mixture of Ti(III) and Fe(II). Determination of nitrates and nitramines by trans-nitration with salicylic acid is suitable on the microscale. A new electrolytic reduction automatic microburette was devised for the reduction, storage and use of the titanium(III) solution.     

第二配位层的氧化还原活性二茂铁促使铁卟啉在氧存在下发生质子还原

采用洁净、可持续的替代能源以解决化石燃料的过度消耗及因其燃烧而导致的日益加剧的全球变暖问题已经成为当务之急.其中,如何实现在大气含氧条件下的析氢反应成为需要攻克的重大挑战.氧还原在热力学上比质子还原更容易进行,并且氧气部分还原时通常产生活性氧物种,致使催化剂失活.因此,需要开发在氧气存在情况下能够有效还原质子的催化剂.本文设计了一种四苯基铁卟啉分子,该分子通过三氮唑将四个二茂铁连接在苯基邻位,并证明该催化剂能够在有氧气的情况下高效还原质子,产生氢气.作为铁卟啉类化合物催化质子还原的活性物种,Fe(0)发生质子还原比发生O2还原的动力学速率快得多,从而为氧气存在下的选择性质子还原奠定了基础.     

Contribution of the ligand to the electroreduction of CO2 catalyzed by a cobalt(II) macrocyclic complex

The electrochemical reduction of carbon dioxide using hexa-aza-macrocycles derived from the condensation of 1,10-phenanthroline and its Co(II) complex as an electrocatalyst dissolved in dimethylformamide has been studied by cyclic voltammetry and UV-visible spectroscopy. The ligand does not show catalytic activity and only generates hydrogen when it is reduced under carbon dioxide. The cobalt complex shows electrocatalytic activity toward the reduction of carbon dioxide, generating carbon monoxide and formic acid. Cyclic voltammetry and UV-visible spectroscopy show that the active site for the reduction is the metal center in oxidation state (I), although the reduced cobalt center alone is not enough to promote reduction of the carbon dioxide. Electrolysis at controlled potential shows that only at potentials corresponding to reduction of the ligand (second reduction) does carbon dioxide reduction occur. Cobalt(I) probably reacts with CO₂ forming a non-isolated intermediate which, when reduced, gives CO and formic acid. The second reduction that takes place on the ligand regenerates the catalyst and gives products, thus becoming the rate-determining step of the reaction.